mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 11:56:43 +07:00
63dada87f7
Some peripherals on Bay Trail and Cherry Trail platforms signal a Power Management Event (PME) to the Power Management Controller (PMC) to wakeup the system. When this happens software needs to explicitly clear the PME bus 0 status bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9. This is modelled in ACPI through the INT0002 ACPI device, which is called a "Virtual GPIO controller" in ACPI because it defines the event handler to call when the PME triggers through _AEI and _L02 methods as would be done for a real GPIO interrupt in ACPI. This commit adds a driver which registers the Virtual GPIOs expected by the DSDT on these devices, letting gpiolib-acpi claim the virtual GPIO and install a GPIO-interrupt handler which call the _L02 handler as it would for a real GPIO controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
84 lines
3.5 KiB
Makefile
84 lines
3.5 KiB
Makefile
#
|
|
# Makefile for linux/drivers/platform/x86
|
|
# x86 Platform-Specific Drivers
|
|
#
|
|
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
|
|
obj-$(CONFIG_ASUS_WMI) += asus-wmi.o
|
|
obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o
|
|
obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o
|
|
obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
|
|
obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
|
|
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
|
|
obj-$(CONFIG_ACPI_CMPC) += classmate-laptop.o
|
|
obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
|
|
obj-$(CONFIG_DELL_SMBIOS) += dell-smbios.o
|
|
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
|
|
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
|
|
obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
|
|
obj-$(CONFIG_DELL_WMI_LED) += dell-wmi-led.o
|
|
obj-$(CONFIG_DELL_SMO8800) += dell-smo8800.o
|
|
obj-$(CONFIG_DELL_RBTN) += dell-rbtn.o
|
|
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
|
|
obj-$(CONFIG_ACERHDF) += acerhdf.o
|
|
obj-$(CONFIG_HP_ACCEL) += hp_accel.o
|
|
obj-$(CONFIG_HP_WIRELESS) += hp-wireless.o
|
|
obj-$(CONFIG_HP_WMI) += hp-wmi.o
|
|
obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o
|
|
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
|
|
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
|
|
obj-$(CONFIG_IDEAPAD_LAPTOP) += ideapad-laptop.o
|
|
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
|
|
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
|
|
obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
|
|
obj-$(CONFIG_FUJITSU_TABLET) += fujitsu-tablet.o
|
|
obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o
|
|
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
|
|
obj-$(CONFIG_ACPI_WMI) += wmi.o
|
|
obj-$(CONFIG_MSI_WMI) += msi-wmi.o
|
|
obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
|
|
obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
|
|
|
|
# toshiba_acpi must link after wmi to ensure that wmi devices are found
|
|
# before toshiba_acpi initializes
|
|
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
|
|
|
|
obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
|
|
obj-$(CONFIG_TOSHIBA_HAPS) += toshiba_haps.o
|
|
obj-$(CONFIG_TOSHIBA_WMI) += toshiba-wmi.o
|
|
obj-$(CONFIG_INTEL_CHT_INT33FE) += intel_cht_int33fe.o
|
|
obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
|
|
obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
|
|
obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o
|
|
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
|
|
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
|
|
obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
|
|
obj-$(CONFIG_INTEL_IPS) += intel_ips.o
|
|
obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o
|
|
obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o
|
|
obj-$(CONFIG_IBM_RTL) += ibm_rtl.o
|
|
obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
|
|
obj-$(CONFIG_MXM_WMI) += mxm-wmi.o
|
|
obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o
|
|
obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
|
|
obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
|
|
obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o
|
|
obj-$(CONFIG_INTEL_RST) += intel-rst.o
|
|
obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
|
|
|
|
obj-$(CONFIG_PVPANIC) += pvpanic.o
|
|
obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
|
|
obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
|
|
obj-$(CONFIG_SILEAD_DMI) += silead_dmi.o
|
|
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
|
|
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
|
|
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
|
|
obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
|
|
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
|
|
intel_telemetry_pltdrv.o \
|
|
intel_telemetry_debugfs.o
|
|
obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
|
|
obj-$(CONFIG_PMC_ATOM) += pmc_atom.o
|
|
obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
|
|
obj-$(CONFIG_MLX_CPLD_PLATFORM) += mlxcpld-hotplug.o
|
|
obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
|