linux_dsm_epyc7002/drivers/video/backlight
Brian Masney 8fbce8efe1 backlight: lm3630a: Add firmware node support
Add fwnode support to the lm3630a driver and optionally allow
configuring the label, default brightness level, and maximum brightness
level. The two outputs can be controlled by bank A and B independently
or bank A can control both outputs.

If the platform data was not configured, then the driver defaults to
enabling both banks. This patch changes the default value to disable
both banks before parsing the firmware node so that just a single bank
can be enabled if desired. There are no in-tree users of this driver.

Driver was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14 08:16:01 +01:00
..
88pm860x_bl.c backlight: 88pm860x_bl: Use of_node_name_eq for node name comparisons 2018-12-14 12:30:24 +00:00
aat2870_bl.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
adp5520_bl.c backlight: Update MODULE AUTHOR email address 2018-09-10 15:54:24 +01:00
adp8860_bl.c backlight: Update MODULE AUTHOR email address 2018-09-10 15:54:24 +01:00
adp8870_bl.c backlight: Update MODULE AUTHOR email address 2018-09-10 15:54:24 +01:00
ams369fg06.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
apple_bl.c backlight: apple_bl: Deprecate pci_get_bus_and_slot() 2017-12-20 13:47:05 +00:00
arcxcnn_bl.c backlight: Add support for Arctic Sand LED backlight driver chips 2017-04-25 09:22:23 +01:00
as3711_bl.c media: backlight: as3711_bl: convert to SPDX identifiers 2018-09-12 09:31:24 -04:00
backlight.c video: backlight: Add devres versions of of_find_backlight 2018-01-29 10:34:53 -05:00
bd6107.c backlight: Remove trivial get_brightness implementations 2014-06-23 13:24:22 +01:00
corgi_lcd.c backlight: tdo24m: Fix the SPI CS between transfers 2018-01-08 09:21:57 +00:00
cr_bllcd.c backlight: cr_bllcd: Add blank line after declarations 2014-08-29 08:24:51 +01:00
da903x_bl.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
da9052_bl.c backlight: da9052: Fix module autoload 2017-01-04 11:37:58 +00:00
ep93xx_bl.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
generic_bl.c backlight: generic-bl: Remove DRIVER1 state 2018-04-30 13:25:14 +01:00
gpio_backlight.c backlight: gpio_backlight: Delete pdata inversion 2017-08-07 17:11:28 +01:00
hp680_bl.c backlight: hp680_bl: use devm_backlight_device_register() 2014-01-23 16:36:56 -08:00
hx8357.c backlight: hx8357: remove unnecessary OOM messages 2014-04-03 16:21:10 -07:00
ili922x.c backlight: ili922x: Remove redundant variable len 2017-11-08 10:43:49 +00:00
ili9320.c backlight: ili9320: remove unnecessary OOM messages 2014-04-03 16:21:10 -07:00
ili9320.h
ipaq_micro_bl.c backlight: ipaq_micro: Fix sparse non static symbol warning 2014-07-31 10:31:22 +01:00
jornada720_bl.c backlight: jornada720: Remove 'else' after a return 2014-08-29 08:26:32 +01:00
jornada720_lcd.c backlight: jornada720: Remove 'else' after a return 2014-08-29 08:26:51 +01:00
kb3886_bl.c dmi: Mark all struct dmi_system_id instances const 2017-09-14 11:59:30 +02:00
Kconfig video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies 2019-05-14 08:16:01 +01:00
l4f00242t03.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
lcd.c backlight: lcd: Fix race condition during register 2017-01-04 11:37:31 +00:00
lm3533_bl.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
lm3630a_bl.c backlight: lm3630a: Add firmware node support 2019-05-14 08:16:01 +01:00
lm3639_bl.c backlight: lm3639: Unconditionally call led_classdev_unregister 2018-10-09 02:58:59 -07:00
lms283gf05.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
lms501kf03.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
locomolcd.c
lp855x_bl.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
lp8788_bl.c backlight: lp8788: Explicitly apply PWM config extracted from pwm_args 2016-05-17 14:45:04 +02:00
ltv350qv.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ltv350qv.h
lv5207lp.c backlight: Remove trivial get_brightness implementations 2014-06-23 13:24:22 +01:00
Makefile backlight: Remove ld9040 driver 2018-10-09 02:59:20 -07:00
max8925_bl.c backlight: max8925_bl: Fix Device Tree node lookup 2018-06-11 13:40:32 +01:00
omap1_bl.c backlight: omap1: add blank line after declarations 2014-08-29 08:27:53 +01:00
ot200_bl.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
otm3225a.c backlight: otm3225a: Add support for ORISE OTM3225A LCD SoC 2018-04-30 10:50:44 +01:00
pandora_bl.c backlight: pandora: Stop using BL_CORE_DRIVER1 2018-04-30 13:25:14 +01:00
pcf50633-backlight.c backlight: pcf50633: Add blank line after declarations 2014-08-29 08:25:53 +01:00
platform_lcd.c backlight: Remove .owner field for drivers using module_platform_driver 2014-08-28 14:09:48 +01:00
pm8941-wled.c backlight: pm8941: Convert to using %pOFn instead of device_node.name 2018-11-27 10:55:37 -06:00
pwm_bl.c backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state 2019-01-30 13:37:42 +00:00
rave-sp-backlight.c backlight: Add RAVE SP backlight driver 2018-04-30 10:50:43 +01:00
sky81452-backlight.c backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro 2015-08-25 08:43:21 +01:00
tdo24m.c backlight: tdo24m: Fix the SPI CS between transfers 2018-01-08 09:21:57 +00:00
tosa_bl.c backlight-tosa: Delete unnecessary assignment for the field "owner" 2016-10-06 09:27:25 +01:00
tosa_lcd.c backlight: tdo24m: Fix the SPI CS between transfers 2018-01-08 09:21:57 +00:00
tps65217_bl.c backlight: tps65217_bl: Fix Device Tree node lookup 2018-06-11 13:40:39 +01:00
vgg2432a4.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
wm831x_bl.c backlight: wm831x_bl: Add blank line after declarations 2014-08-29 08:26:21 +01:00