mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 13:25:15 +07:00
dcaf12a8b0
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Later sanity checks on node properties (which would likely be missing) should prevent this from causing much trouble however, especially as the original premature free of the parent node has already been fixed separately (but that "fix" was apparently never backported to stable). Fixes:e7ec014a47
("Input: twl6040-vibra - update for device tree support") Fixes:c52c545ead
("Input: twl6040-vibra - fix DT node memory management") Cc: stable <stable@vger.kernel.org> # 3.6 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware) Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
383 lines
10 KiB
C
383 lines
10 KiB
C
/*
|
|
* twl6040-vibra.c - TWL6040 Vibrator driver
|
|
*
|
|
* Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
|
|
* Author: Misael Lopez Cruz <misael.lopez@ti.com>
|
|
*
|
|
* Copyright: (C) 2011 Texas Instruments, Inc.
|
|
*
|
|
* Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
|
|
* Felipe Balbi <felipe.balbi@nokia.com>
|
|
* Jari Vanhala <ext-javi.vanhala@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/input.h>
|
|
#include <linux/mfd/twl6040.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define EFFECT_DIR_180_DEG 0x8000
|
|
|
|
/* Recommended modulation index 85% */
|
|
#define TWL6040_VIBRA_MOD 85
|
|
|
|
#define TWL6040_NUM_SUPPLIES 2
|
|
|
|
struct vibra_info {
|
|
struct device *dev;
|
|
struct input_dev *input_dev;
|
|
struct work_struct play_work;
|
|
|
|
int irq;
|
|
|
|
bool enabled;
|
|
int weak_speed;
|
|
int strong_speed;
|
|
int direction;
|
|
|
|
unsigned int vibldrv_res;
|
|
unsigned int vibrdrv_res;
|
|
unsigned int viblmotor_res;
|
|
unsigned int vibrmotor_res;
|
|
|
|
struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
|
|
|
|
struct twl6040 *twl6040;
|
|
};
|
|
|
|
static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
|
|
{
|
|
struct vibra_info *info = data;
|
|
struct twl6040 *twl6040 = info->twl6040;
|
|
u8 status;
|
|
|
|
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
|
|
if (status & TWL6040_VIBLOCDET) {
|
|
dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
|
|
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
|
|
TWL6040_VIBENA);
|
|
}
|
|
if (status & TWL6040_VIBROCDET) {
|
|
dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
|
|
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
|
|
TWL6040_VIBENA);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void twl6040_vibra_enable(struct vibra_info *info)
|
|
{
|
|
struct twl6040 *twl6040 = info->twl6040;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
|
|
if (ret) {
|
|
dev_err(info->dev, "failed to enable regulators %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
twl6040_power(info->twl6040, 1);
|
|
if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
|
|
/*
|
|
* ERRATA: Disable overcurrent protection for at least
|
|
* 3ms when enabling vibrator drivers to avoid false
|
|
* overcurrent detection
|
|
*/
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
|
|
TWL6040_VIBENA | TWL6040_VIBCTRL);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
|
|
TWL6040_VIBENA | TWL6040_VIBCTRL);
|
|
usleep_range(3000, 3500);
|
|
}
|
|
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
|
|
TWL6040_VIBENA);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
|
|
TWL6040_VIBENA);
|
|
|
|
info->enabled = true;
|
|
}
|
|
|
|
static void twl6040_vibra_disable(struct vibra_info *info)
|
|
{
|
|
struct twl6040 *twl6040 = info->twl6040;
|
|
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
|
|
twl6040_power(info->twl6040, 0);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
|
|
|
|
info->enabled = false;
|
|
}
|
|
|
|
static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
|
|
int speed, int direction)
|
|
{
|
|
int vpk, max_code;
|
|
u8 vibdat;
|
|
|
|
/* output swing */
|
|
vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
|
|
(100 * (vibdrv_res + motor_res));
|
|
|
|
/* 50mV per VIBDAT code step */
|
|
max_code = vpk / 50;
|
|
if (max_code > TWL6040_VIBDAT_MAX)
|
|
max_code = TWL6040_VIBDAT_MAX;
|
|
|
|
/* scale speed to max allowed code */
|
|
vibdat = (u8)((speed * max_code) / USHRT_MAX);
|
|
|
|
/* 2's complement for direction > 180 degrees */
|
|
vibdat *= direction;
|
|
|
|
return vibdat;
|
|
}
|
|
|
|
static void twl6040_vibra_set_effect(struct vibra_info *info)
|
|
{
|
|
struct twl6040 *twl6040 = info->twl6040;
|
|
u8 vibdatl, vibdatr;
|
|
int volt;
|
|
|
|
/* weak motor */
|
|
volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
|
|
vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
|
|
info->viblmotor_res,
|
|
info->weak_speed, info->direction);
|
|
|
|
/* strong motor */
|
|
volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
|
|
vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
|
|
info->vibrmotor_res,
|
|
info->strong_speed, info->direction);
|
|
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
|
|
twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
|
|
}
|
|
|
|
static void vibra_play_work(struct work_struct *work)
|
|
{
|
|
struct vibra_info *info = container_of(work,
|
|
struct vibra_info, play_work);
|
|
int ret;
|
|
|
|
/* Do not allow effect, while the routing is set to use audio */
|
|
ret = twl6040_get_vibralr_status(info->twl6040);
|
|
if (ret & TWL6040_VIBSEL) {
|
|
dev_info(info->dev, "Vibra is configured for audio\n");
|
|
return;
|
|
}
|
|
|
|
if (info->weak_speed || info->strong_speed) {
|
|
if (!info->enabled)
|
|
twl6040_vibra_enable(info);
|
|
|
|
twl6040_vibra_set_effect(info);
|
|
} else if (info->enabled)
|
|
twl6040_vibra_disable(info);
|
|
|
|
}
|
|
|
|
static int vibra_play(struct input_dev *input, void *data,
|
|
struct ff_effect *effect)
|
|
{
|
|
struct vibra_info *info = input_get_drvdata(input);
|
|
|
|
info->weak_speed = effect->u.rumble.weak_magnitude;
|
|
info->strong_speed = effect->u.rumble.strong_magnitude;
|
|
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
|
|
|
|
schedule_work(&info->play_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void twl6040_vibra_close(struct input_dev *input)
|
|
{
|
|
struct vibra_info *info = input_get_drvdata(input);
|
|
|
|
cancel_work_sync(&info->play_work);
|
|
|
|
if (info->enabled)
|
|
twl6040_vibra_disable(info);
|
|
}
|
|
|
|
static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct vibra_info *info = platform_get_drvdata(pdev);
|
|
|
|
cancel_work_sync(&info->play_work);
|
|
|
|
if (info->enabled)
|
|
twl6040_vibra_disable(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
|
|
|
|
static int twl6040_vibra_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *twl6040_core_dev = pdev->dev.parent;
|
|
struct device_node *twl6040_core_node;
|
|
struct vibra_info *info;
|
|
int vddvibl_uV = 0;
|
|
int vddvibr_uV = 0;
|
|
int error;
|
|
|
|
twl6040_core_node = of_get_child_by_name(twl6040_core_dev->of_node,
|
|
"vibra");
|
|
if (!twl6040_core_node) {
|
|
dev_err(&pdev->dev, "parent of node is missing?\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
of_node_put(twl6040_core_node);
|
|
dev_err(&pdev->dev, "couldn't allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info->dev = &pdev->dev;
|
|
|
|
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
|
|
&info->vibldrv_res);
|
|
of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
|
|
&info->vibrdrv_res);
|
|
of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
|
|
&info->viblmotor_res);
|
|
of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
|
|
&info->vibrmotor_res);
|
|
of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
|
|
of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
|
|
|
|
of_node_put(twl6040_core_node);
|
|
|
|
if ((!info->vibldrv_res && !info->viblmotor_res) ||
|
|
(!info->vibrdrv_res && !info->vibrmotor_res)) {
|
|
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
info->irq = platform_get_irq(pdev, 0);
|
|
if (info->irq < 0) {
|
|
dev_err(info->dev, "invalid irq\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
|
|
twl6040_vib_irq_handler,
|
|
IRQF_ONESHOT,
|
|
"twl6040_irq_vib", info);
|
|
if (error) {
|
|
dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
info->supplies[0].supply = "vddvibl";
|
|
info->supplies[1].supply = "vddvibr";
|
|
/*
|
|
* When booted with Device tree the regulators are attached to the
|
|
* parent device (twl6040 MFD core)
|
|
*/
|
|
error = devm_regulator_bulk_get(twl6040_core_dev,
|
|
ARRAY_SIZE(info->supplies),
|
|
info->supplies);
|
|
if (error) {
|
|
dev_err(info->dev, "couldn't get regulators %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
if (vddvibl_uV) {
|
|
error = regulator_set_voltage(info->supplies[0].consumer,
|
|
vddvibl_uV, vddvibl_uV);
|
|
if (error) {
|
|
dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if (vddvibr_uV) {
|
|
error = regulator_set_voltage(info->supplies[1].consumer,
|
|
vddvibr_uV, vddvibr_uV);
|
|
if (error) {
|
|
dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
INIT_WORK(&info->play_work, vibra_play_work);
|
|
|
|
info->input_dev = devm_input_allocate_device(&pdev->dev);
|
|
if (!info->input_dev) {
|
|
dev_err(info->dev, "couldn't allocate input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
input_set_drvdata(info->input_dev, info);
|
|
|
|
info->input_dev->name = "twl6040:vibrator";
|
|
info->input_dev->id.version = 1;
|
|
info->input_dev->close = twl6040_vibra_close;
|
|
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
|
|
|
|
error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
|
|
if (error) {
|
|
dev_err(info->dev, "couldn't register vibrator to FF\n");
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(info->input_dev);
|
|
if (error) {
|
|
dev_err(info->dev, "couldn't register input device\n");
|
|
return error;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver twl6040_vibra_driver = {
|
|
.probe = twl6040_vibra_probe,
|
|
.driver = {
|
|
.name = "twl6040-vibra",
|
|
.pm = &twl6040_vibra_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(twl6040_vibra_driver);
|
|
|
|
MODULE_ALIAS("platform:twl6040-vibra");
|
|
MODULE_DESCRIPTION("TWL6040 Vibra driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
|
|
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
|