mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 05:35:16 +07:00
36b66c3fc2
The imx5 pm code uses static mapping to access Cortex and GPC registers. The patch create struct imx5_pm_data to encode physical address of Cortex and GPC block, and create dynamic mapping for them at run-time. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
236 lines
5.9 KiB
C
236 lines
5.9 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
#include <linux/suspend.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/export.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/system_misc.h>
|
|
#include <asm/tlbflush.h>
|
|
|
|
#include "common.h"
|
|
#include "cpuidle.h"
|
|
#include "hardware.h"
|
|
|
|
#define MXC_CCM_CLPCR 0x54
|
|
#define MXC_CCM_CLPCR_LPM_OFFSET 0
|
|
#define MXC_CCM_CLPCR_LPM_MASK 0x3
|
|
#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
|
|
#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
|
|
#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
|
|
|
|
#define MXC_CORTEXA8_PLAT_LPC 0xc
|
|
#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
|
|
#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
|
|
|
|
#define MXC_SRPG_NEON_SRPGCR 0x280
|
|
#define MXC_SRPG_ARM_SRPGCR 0x2a0
|
|
#define MXC_SRPG_EMPGC0_SRPGCR 0x2c0
|
|
#define MXC_SRPG_EMPGC1_SRPGCR 0x2d0
|
|
|
|
#define MXC_SRPGCR_PCR 1
|
|
|
|
/*
|
|
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
|
|
* This is also the lowest power state possible without affecting
|
|
* non-cpu parts of the system. For these reasons, imx5 should default
|
|
* to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
|
|
* uses this state and needs to take no action when registers remain confgiured
|
|
* for this state.
|
|
*/
|
|
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
|
|
|
|
struct imx5_pm_data {
|
|
phys_addr_t cortex_addr;
|
|
phys_addr_t gpc_addr;
|
|
};
|
|
|
|
static const struct imx5_pm_data imx51_pm_data __initconst = {
|
|
.cortex_addr = 0x83fa0000,
|
|
.gpc_addr = 0x73fd8000,
|
|
};
|
|
|
|
static const struct imx5_pm_data imx53_pm_data __initconst = {
|
|
.cortex_addr = 0x63fa0000,
|
|
.gpc_addr = 0x53fd8000,
|
|
};
|
|
|
|
static void __iomem *ccm_base;
|
|
static void __iomem *cortex_base;
|
|
static void __iomem *gpc_base;
|
|
|
|
void __init imx5_pm_set_ccm_base(void __iomem *base)
|
|
{
|
|
ccm_base = base;
|
|
}
|
|
|
|
/*
|
|
* set cpu low power mode before WFI instruction. This function is called
|
|
* mx5 because it can be used for mx51, and mx53.
|
|
*/
|
|
static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
|
|
{
|
|
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
|
|
u32 empgc0, empgc1;
|
|
int stop_mode = 0;
|
|
|
|
/* always allow platform to issue a deep sleep mode request */
|
|
plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
|
|
~(MXC_CORTEXA8_PLAT_LPC_DSM);
|
|
ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
|
|
~(MXC_CCM_CLPCR_LPM_MASK);
|
|
arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
|
|
~(MXC_SRPGCR_PCR);
|
|
empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
|
|
~(MXC_SRPGCR_PCR);
|
|
empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
|
|
~(MXC_SRPGCR_PCR);
|
|
|
|
switch (mode) {
|
|
case WAIT_CLOCKED:
|
|
break;
|
|
case WAIT_UNCLOCKED:
|
|
ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
break;
|
|
case WAIT_UNCLOCKED_POWER_OFF:
|
|
case STOP_POWER_OFF:
|
|
plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
|
|
| MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
|
|
if (mode == WAIT_UNCLOCKED_POWER_OFF) {
|
|
ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
|
|
ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
|
|
stop_mode = 0;
|
|
} else {
|
|
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
|
|
ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
|
|
ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
|
|
stop_mode = 1;
|
|
}
|
|
arm_srpgcr |= MXC_SRPGCR_PCR;
|
|
break;
|
|
case STOP_POWER_ON:
|
|
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
|
|
return;
|
|
}
|
|
|
|
__raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
|
|
__raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
|
|
__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
|
|
__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
|
|
|
|
if (stop_mode) {
|
|
empgc0 |= MXC_SRPGCR_PCR;
|
|
empgc1 |= MXC_SRPGCR_PCR;
|
|
|
|
__raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
|
|
__raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
|
|
}
|
|
}
|
|
|
|
static int mx5_suspend_enter(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_MEM:
|
|
mx5_cpu_lp_set(STOP_POWER_OFF);
|
|
break;
|
|
case PM_SUSPEND_STANDBY:
|
|
/* DEFAULT_IDLE_STATE already configured */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state == PM_SUSPEND_MEM) {
|
|
local_flush_tlb_all();
|
|
flush_cache_all();
|
|
|
|
/*clear the EMPGC0/1 bits */
|
|
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
|
|
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
|
|
}
|
|
cpu_do_idle();
|
|
|
|
/* return registers to default idle state */
|
|
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
|
|
return 0;
|
|
}
|
|
|
|
static int mx5_pm_valid(suspend_state_t state)
|
|
{
|
|
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
|
|
}
|
|
|
|
static const struct platform_suspend_ops mx5_suspend_ops = {
|
|
.valid = mx5_pm_valid,
|
|
.enter = mx5_suspend_enter,
|
|
};
|
|
|
|
static inline int imx5_cpu_do_idle(void)
|
|
{
|
|
int ret = tzic_enable_wake();
|
|
|
|
if (likely(!ret))
|
|
cpu_do_idle();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx5_pm_idle(void)
|
|
{
|
|
imx5_cpu_do_idle();
|
|
}
|
|
|
|
static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
|
|
{
|
|
int ret;
|
|
struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
|
|
|
|
if (IS_ERR(gpc_dvfs_clk))
|
|
return PTR_ERR(gpc_dvfs_clk);
|
|
|
|
ret = clk_prepare_enable(gpc_dvfs_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
arm_pm_idle = imx5_pm_idle;
|
|
|
|
cortex_base = ioremap(data->cortex_addr, SZ_16K);
|
|
gpc_base = ioremap(data->gpc_addr, SZ_16K);
|
|
WARN_ON(!ccm_base || !cortex_base || !gpc_base);
|
|
|
|
/* Set the registers to the default cpu idle state. */
|
|
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
|
|
|
|
ret = imx5_cpuidle_init();
|
|
if (ret)
|
|
pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
|
|
|
|
suspend_set_ops(&mx5_suspend_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init imx51_pm_init(void)
|
|
{
|
|
imx5_pm_common_init(&imx51_pm_data);
|
|
}
|
|
|
|
void __init imx53_pm_init(void)
|
|
{
|
|
imx5_pm_common_init(&imx53_pm_data);
|
|
}
|