linux_dsm_epyc7002/arch/arm/include/asm/cp15.h
Uwe Kleine-König b849a60e09 ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15
This makes cr_alignment a constant 0 to break code that tries to modify
the value as it's likely that it's built on wrong assumption when
CONFIG_CPU_CP15 isn't defined. For code that is only reading the value 0
is more or less a fine value to report.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: 1358413196-5609-2-git-send-email-u.kleine-koenig@pengutronix.de (v8)
2013-01-31 21:44:45 +01:00

102 lines
2.9 KiB
C

#ifndef __ASM_ARM_CP15_H
#define __ASM_ARM_CP15_H
#include <asm/barrier.h>
/*
* CR1 bits (CP#15 CR1)
*/
#define CR_M (1 << 0) /* MMU enable */
#define CR_A (1 << 1) /* Alignment abort enable */
#define CR_C (1 << 2) /* Dcache enable */
#define CR_W (1 << 3) /* Write buffer enable */
#define CR_P (1 << 4) /* 32-bit exception handler */
#define CR_D (1 << 5) /* 32-bit data address range */
#define CR_L (1 << 6) /* Implementation defined */
#define CR_B (1 << 7) /* Big endian */
#define CR_S (1 << 8) /* System MMU protection */
#define CR_R (1 << 9) /* ROM MMU protection */
#define CR_F (1 << 10) /* Implementation defined */
#define CR_Z (1 << 11) /* Implementation defined */
#define CR_I (1 << 12) /* Icache enable */
#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
#define CR_RR (1 << 14) /* Round Robin cache replacement */
#define CR_L4 (1 << 15) /* LDR pc can set T bit */
#define CR_DT (1 << 16)
#define CR_IT (1 << 18)
#define CR_ST (1 << 19)
#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
#define CR_U (1 << 22) /* Unaligned access operation */
#define CR_XP (1 << 23) /* Extended page tables */
#define CR_VE (1 << 24) /* Vectored interrupts */
#define CR_EE (1 << 25) /* Exception (Big) Endian */
#define CR_TRE (1 << 28) /* TEX remap enable */
#define CR_AFE (1 << 29) /* Access flag enable */
#define CR_TE (1 << 30) /* Thumb exception enable */
#ifndef __ASSEMBLY__
#if __LINUX_ARM_ARCH__ >= 4
#define vectors_high() (cr_alignment & CR_V)
#else
#define vectors_high() (0)
#endif
#ifdef CONFIG_CPU_CP15
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
extern unsigned long cr_alignment; /* defined in entry-armv.S */
static inline unsigned int get_cr(void)
{
unsigned int val;
asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc");
return val;
}
static inline void set_cr(unsigned int val)
{
asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR"
: : "r" (val) : "cc");
isb();
}
#ifndef CONFIG_SMP
extern void adjust_cr(unsigned long mask, unsigned long set);
#endif
#define CPACC_FULL(n) (3 << (n * 2))
#define CPACC_SVC(n) (1 << (n * 2))
#define CPACC_DISABLE(n) (0 << (n * 2))
static inline unsigned int get_copro_access(void)
{
unsigned int val;
asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
: "=r" (val) : : "cc");
return val;
}
static inline void set_copro_access(unsigned int val)
{
asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
: : "r" (val) : "cc");
isb();
}
#else /* ifdef CONFIG_CPU_CP15 */
/*
* cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the
* minds of the developers). Yielding 0 for machines without a cp15 (and making
* it read-only) is fine for most cases and saves quite some #ifdeffery.
*/
#define cr_no_alignment UL(0)
#define cr_alignment UL(0)
#endif /* ifdef CONFIG_CPU_CP15 / else */
#endif /* ifndef __ASSEMBLY__ */
#endif