linux_dsm_epyc7002/fs/btrfs/ordered-data.c
Chris Mason 5a3f23d515 Btrfs: add extra flushing for renames and truncates
Renames and truncates are both common ways to replace old data with new
data.  The filesystem can make an effort to make sure the new data is
on disk before actually replacing the old data.

This is especially important for rename, which many application use as
though it were atomic for both the data and the metadata involved.  The
current btrfs code will happily replace a file that is fully on disk
with one that was just created and still has pending IO.

If we crash after transaction commit but before the IO is done, we'll end
up replacing a good file with a zero length file.  The solution used
here is to create a list of inodes that need special ordering and force
them to disk before the commit is done.  This is similar to the
ext3 style data=ordering, except it is only done on selected files.

Btrfs is able to get away with this because it does not wait on commits
very often, even for fsync (which use a sub-commit).

For renames, we order the file when it wasn't already
on disk and when it is replacing an existing file.  Larger files
are sent to filemap_flush right away (before the transaction handle is
opened).

For truncates, we order if the file goes from non-zero size down to
zero size.  This is a little different, because at the time of the
truncate the file has no dirty bytes to order.  But, we flag the inode
so that it is added to the ordered list on close (via release method).  We
also immediately add it to the ordered list of the current transaction
so that we can try to flush down any writes the application sneaks in
before commit.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-31 14:27:58 -04:00

847 lines
23 KiB
C

/*
* Copyright (C) 2007 Oracle. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
#include "ctree.h"
#include "transaction.h"
#include "btrfs_inode.h"
#include "extent_io.h"
static u64 entry_end(struct btrfs_ordered_extent *entry)
{
if (entry->file_offset + entry->len < entry->file_offset)
return (u64)-1;
return entry->file_offset + entry->len;
}
/* returns NULL if the insertion worked, or it returns the node it did find
* in the tree
*/
static struct rb_node *tree_insert(struct rb_root *root, u64 file_offset,
struct rb_node *node)
{
struct rb_node **p = &root->rb_node;
struct rb_node *parent = NULL;
struct btrfs_ordered_extent *entry;
while (*p) {
parent = *p;
entry = rb_entry(parent, struct btrfs_ordered_extent, rb_node);
if (file_offset < entry->file_offset)
p = &(*p)->rb_left;
else if (file_offset >= entry_end(entry))
p = &(*p)->rb_right;
else
return parent;
}
rb_link_node(node, parent, p);
rb_insert_color(node, root);
return NULL;
}
/*
* look for a given offset in the tree, and if it can't be found return the
* first lesser offset
*/
static struct rb_node *__tree_search(struct rb_root *root, u64 file_offset,
struct rb_node **prev_ret)
{
struct rb_node *n = root->rb_node;
struct rb_node *prev = NULL;
struct rb_node *test;
struct btrfs_ordered_extent *entry;
struct btrfs_ordered_extent *prev_entry = NULL;
while (n) {
entry = rb_entry(n, struct btrfs_ordered_extent, rb_node);
prev = n;
prev_entry = entry;
if (file_offset < entry->file_offset)
n = n->rb_left;
else if (file_offset >= entry_end(entry))
n = n->rb_right;
else
return n;
}
if (!prev_ret)
return NULL;
while (prev && file_offset >= entry_end(prev_entry)) {
test = rb_next(prev);
if (!test)
break;
prev_entry = rb_entry(test, struct btrfs_ordered_extent,
rb_node);
if (file_offset < entry_end(prev_entry))
break;
prev = test;
}
if (prev)
prev_entry = rb_entry(prev, struct btrfs_ordered_extent,
rb_node);
while (prev && file_offset < entry_end(prev_entry)) {
test = rb_prev(prev);
if (!test)
break;
prev_entry = rb_entry(test, struct btrfs_ordered_extent,
rb_node);
prev = test;
}
*prev_ret = prev;
return NULL;
}
/*
* helper to check if a given offset is inside a given entry
*/
static int offset_in_entry(struct btrfs_ordered_extent *entry, u64 file_offset)
{
if (file_offset < entry->file_offset ||
entry->file_offset + entry->len <= file_offset)
return 0;
return 1;
}
/*
* look find the first ordered struct that has this offset, otherwise
* the first one less than this offset
*/
static inline struct rb_node *tree_search(struct btrfs_ordered_inode_tree *tree,
u64 file_offset)
{
struct rb_root *root = &tree->tree;
struct rb_node *prev;
struct rb_node *ret;
struct btrfs_ordered_extent *entry;
if (tree->last) {
entry = rb_entry(tree->last, struct btrfs_ordered_extent,
rb_node);
if (offset_in_entry(entry, file_offset))
return tree->last;
}
ret = __tree_search(root, file_offset, &prev);
if (!ret)
ret = prev;
if (ret)
tree->last = ret;
return ret;
}
/* allocate and add a new ordered_extent into the per-inode tree.
* file_offset is the logical offset in the file
*
* start is the disk block number of an extent already reserved in the
* extent allocation tree
*
* len is the length of the extent
*
* This also sets the EXTENT_ORDERED bit on the range in the inode.
*
* The tree is given a single reference on the ordered extent that was
* inserted.
*/
int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len, int type)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry;
tree = &BTRFS_I(inode)->ordered_tree;
entry = kzalloc(sizeof(*entry), GFP_NOFS);
if (!entry)
return -ENOMEM;
mutex_lock(&tree->mutex);
entry->file_offset = file_offset;
entry->start = start;
entry->len = len;
entry->disk_len = disk_len;
entry->inode = inode;
if (type != BTRFS_ORDERED_IO_DONE && type != BTRFS_ORDERED_COMPLETE)
set_bit(type, &entry->flags);
/* one ref for the tree */
atomic_set(&entry->refs, 1);
init_waitqueue_head(&entry->wait);
INIT_LIST_HEAD(&entry->list);
INIT_LIST_HEAD(&entry->root_extent_list);
node = tree_insert(&tree->tree, file_offset,
&entry->rb_node);
BUG_ON(node);
set_extent_ordered(&BTRFS_I(inode)->io_tree, file_offset,
entry_end(entry) - 1, GFP_NOFS);
spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
list_add_tail(&entry->root_extent_list,
&BTRFS_I(inode)->root->fs_info->ordered_extents);
spin_unlock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
mutex_unlock(&tree->mutex);
BUG_ON(node);
return 0;
}
/*
* Add a struct btrfs_ordered_sum into the list of checksums to be inserted
* when an ordered extent is finished. If the list covers more than one
* ordered extent, it is split across multiples.
*/
int btrfs_add_ordered_sum(struct inode *inode,
struct btrfs_ordered_extent *entry,
struct btrfs_ordered_sum *sum)
{
struct btrfs_ordered_inode_tree *tree;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
list_add_tail(&sum->list, &entry->list);
mutex_unlock(&tree->mutex);
return 0;
}
/*
* this is used to account for finished IO across a given range
* of the file. The IO should not span ordered extents. If
* a given ordered_extent is completely done, 1 is returned, otherwise
* 0.
*
* test_and_set_bit on a flag in the struct btrfs_ordered_extent is used
* to make sure this function only returns 1 once for a given ordered extent.
*/
int btrfs_dec_test_ordered_pending(struct inode *inode,
u64 file_offset, u64 io_size)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
int ret;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
clear_extent_ordered(io_tree, file_offset, file_offset + io_size - 1,
GFP_NOFS);
node = tree_search(tree, file_offset);
if (!node) {
ret = 1;
goto out;
}
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (!offset_in_entry(entry, file_offset)) {
ret = 1;
goto out;
}
ret = test_range_bit(io_tree, entry->file_offset,
entry->file_offset + entry->len - 1,
EXTENT_ORDERED, 0);
if (ret == 0)
ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
out:
mutex_unlock(&tree->mutex);
return ret == 0;
}
/*
* used to drop a reference on an ordered extent. This will free
* the extent if the last reference is dropped
*/
int btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry)
{
struct list_head *cur;
struct btrfs_ordered_sum *sum;
if (atomic_dec_and_test(&entry->refs)) {
while (!list_empty(&entry->list)) {
cur = entry->list.next;
sum = list_entry(cur, struct btrfs_ordered_sum, list);
list_del(&sum->list);
kfree(sum);
}
kfree(entry);
}
return 0;
}
/*
* remove an ordered extent from the tree. No references are dropped
* but, anyone waiting on this extent is woken up.
*/
int btrfs_remove_ordered_extent(struct inode *inode,
struct btrfs_ordered_extent *entry)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
node = &entry->rb_node;
rb_erase(node, &tree->tree);
tree->last = NULL;
set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
list_del_init(&entry->root_extent_list);
/*
* we have no more ordered extents for this inode and
* no dirty pages. We can safely remove it from the
* list of ordered extents
*/
if (RB_EMPTY_ROOT(&tree->tree) &&
!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
list_del_init(&BTRFS_I(inode)->ordered_operations);
}
spin_unlock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
mutex_unlock(&tree->mutex);
wake_up(&entry->wait);
return 0;
}
/*
* wait for all the ordered extents in a root. This is done when balancing
* space between drives.
*/
int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only)
{
struct list_head splice;
struct list_head *cur;
struct btrfs_ordered_extent *ordered;
struct inode *inode;
INIT_LIST_HEAD(&splice);
spin_lock(&root->fs_info->ordered_extent_lock);
list_splice_init(&root->fs_info->ordered_extents, &splice);
while (!list_empty(&splice)) {
cur = splice.next;
ordered = list_entry(cur, struct btrfs_ordered_extent,
root_extent_list);
if (nocow_only &&
!test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags) &&
!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags)) {
list_move(&ordered->root_extent_list,
&root->fs_info->ordered_extents);
cond_resched_lock(&root->fs_info->ordered_extent_lock);
continue;
}
list_del_init(&ordered->root_extent_list);
atomic_inc(&ordered->refs);
/*
* the inode may be getting freed (in sys_unlink path).
*/
inode = igrab(ordered->inode);
spin_unlock(&root->fs_info->ordered_extent_lock);
if (inode) {
btrfs_start_ordered_extent(inode, ordered, 1);
btrfs_put_ordered_extent(ordered);
iput(inode);
} else {
btrfs_put_ordered_extent(ordered);
}
spin_lock(&root->fs_info->ordered_extent_lock);
}
spin_unlock(&root->fs_info->ordered_extent_lock);
return 0;
}
/*
* this is used during transaction commit to write all the inodes
* added to the ordered operation list. These files must be fully on
* disk before the transaction commits.
*
* we have two modes here, one is to just start the IO via filemap_flush
* and the other is to wait for all the io. When we wait, we have an
* extra check to make sure the ordered operation list really is empty
* before we return
*/
int btrfs_run_ordered_operations(struct btrfs_root *root, int wait)
{
struct btrfs_inode *btrfs_inode;
struct inode *inode;
struct list_head splice;
INIT_LIST_HEAD(&splice);
mutex_lock(&root->fs_info->ordered_operations_mutex);
spin_lock(&root->fs_info->ordered_extent_lock);
again:
list_splice_init(&root->fs_info->ordered_operations, &splice);
while (!list_empty(&splice)) {
btrfs_inode = list_entry(splice.next, struct btrfs_inode,
ordered_operations);
inode = &btrfs_inode->vfs_inode;
list_del_init(&btrfs_inode->ordered_operations);
/*
* the inode may be getting freed (in sys_unlink path).
*/
inode = igrab(inode);
if (!wait && inode) {
list_add_tail(&BTRFS_I(inode)->ordered_operations,
&root->fs_info->ordered_operations);
}
spin_unlock(&root->fs_info->ordered_extent_lock);
if (inode) {
if (wait)
btrfs_wait_ordered_range(inode, 0, (u64)-1);
else
filemap_flush(inode->i_mapping);
iput(inode);
}
cond_resched();
spin_lock(&root->fs_info->ordered_extent_lock);
}
if (wait && !list_empty(&root->fs_info->ordered_operations))
goto again;
spin_unlock(&root->fs_info->ordered_extent_lock);
mutex_unlock(&root->fs_info->ordered_operations_mutex);
return 0;
}
/*
* Used to start IO or wait for a given ordered extent to finish.
*
* If wait is one, this effectively waits on page writeback for all the pages
* in the extent, and it waits on the io completion code to insert
* metadata into the btree corresponding to the extent
*/
void btrfs_start_ordered_extent(struct inode *inode,
struct btrfs_ordered_extent *entry,
int wait)
{
u64 start = entry->file_offset;
u64 end = start + entry->len - 1;
/*
* pages in the range can be dirty, clean or writeback. We
* start IO on any dirty ones so the wait doesn't stall waiting
* for pdflush to find them
*/
btrfs_fdatawrite_range(inode->i_mapping, start, end, WB_SYNC_ALL);
if (wait) {
wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
&entry->flags));
}
}
/*
* Used to wait on ordered extents across a large range of bytes.
*/
int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len)
{
u64 end;
u64 orig_end;
u64 wait_end;
struct btrfs_ordered_extent *ordered;
if (start + len < start) {
orig_end = INT_LIMIT(loff_t);
} else {
orig_end = start + len - 1;
if (orig_end > INT_LIMIT(loff_t))
orig_end = INT_LIMIT(loff_t);
}
wait_end = orig_end;
again:
/* start IO across the range first to instantiate any delalloc
* extents
*/
btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE);
/* The compression code will leave pages locked but return from
* writepage without setting the page writeback. Starting again
* with WB_SYNC_ALL will end up waiting for the IO to actually start.
*/
btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
btrfs_wait_on_page_writeback_range(inode->i_mapping,
start >> PAGE_CACHE_SHIFT,
orig_end >> PAGE_CACHE_SHIFT);
end = orig_end;
while (1) {
ordered = btrfs_lookup_first_ordered_extent(inode, end);
if (!ordered)
break;
if (ordered->file_offset > orig_end) {
btrfs_put_ordered_extent(ordered);
break;
}
if (ordered->file_offset + ordered->len < start) {
btrfs_put_ordered_extent(ordered);
break;
}
btrfs_start_ordered_extent(inode, ordered, 1);
end = ordered->file_offset;
btrfs_put_ordered_extent(ordered);
if (end == 0 || end == start)
break;
end--;
}
if (test_range_bit(&BTRFS_I(inode)->io_tree, start, orig_end,
EXTENT_ORDERED | EXTENT_DELALLOC, 0)) {
schedule_timeout(1);
goto again;
}
return 0;
}
/*
* find an ordered extent corresponding to file_offset. return NULL if
* nothing is found, otherwise take a reference on the extent and return it
*/
struct btrfs_ordered_extent *btrfs_lookup_ordered_extent(struct inode *inode,
u64 file_offset)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
node = tree_search(tree, file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (!offset_in_entry(entry, file_offset))
entry = NULL;
if (entry)
atomic_inc(&entry->refs);
out:
mutex_unlock(&tree->mutex);
return entry;
}
/*
* lookup and return any extent before 'file_offset'. NULL is returned
* if none is found
*/
struct btrfs_ordered_extent *
btrfs_lookup_first_ordered_extent(struct inode *inode, u64 file_offset)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
node = tree_search(tree, file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
atomic_inc(&entry->refs);
out:
mutex_unlock(&tree->mutex);
return entry;
}
/*
* After an extent is done, call this to conditionally update the on disk
* i_size. i_size is updated to cover any fully written part of the file.
*/
int btrfs_ordered_update_i_size(struct inode *inode,
struct btrfs_ordered_extent *ordered)
{
struct btrfs_ordered_inode_tree *tree = &BTRFS_I(inode)->ordered_tree;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
u64 disk_i_size;
u64 new_i_size;
u64 i_size_test;
struct rb_node *node;
struct btrfs_ordered_extent *test;
mutex_lock(&tree->mutex);
disk_i_size = BTRFS_I(inode)->disk_i_size;
/*
* if the disk i_size is already at the inode->i_size, or
* this ordered extent is inside the disk i_size, we're done
*/
if (disk_i_size >= inode->i_size ||
ordered->file_offset + ordered->len <= disk_i_size) {
goto out;
}
/*
* we can't update the disk_isize if there are delalloc bytes
* between disk_i_size and this ordered extent
*/
if (test_range_bit(io_tree, disk_i_size,
ordered->file_offset + ordered->len - 1,
EXTENT_DELALLOC, 0)) {
goto out;
}
/*
* walk backward from this ordered extent to disk_i_size.
* if we find an ordered extent then we can't update disk i_size
* yet
*/
node = &ordered->rb_node;
while (1) {
node = rb_prev(node);
if (!node)
break;
test = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (test->file_offset + test->len <= disk_i_size)
break;
if (test->file_offset >= inode->i_size)
break;
if (test->file_offset >= disk_i_size)
goto out;
}
new_i_size = min_t(u64, entry_end(ordered), i_size_read(inode));
/*
* at this point, we know we can safely update i_size to at least
* the offset from this ordered extent. But, we need to
* walk forward and see if ios from higher up in the file have
* finished.
*/
node = rb_next(&ordered->rb_node);
i_size_test = 0;
if (node) {
/*
* do we have an area where IO might have finished
* between our ordered extent and the next one.
*/
test = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (test->file_offset > entry_end(ordered))
i_size_test = test->file_offset;
} else {
i_size_test = i_size_read(inode);
}
/*
* i_size_test is the end of a region after this ordered
* extent where there are no ordered extents. As long as there
* are no delalloc bytes in this area, it is safe to update
* disk_i_size to the end of the region.
*/
if (i_size_test > entry_end(ordered) &&
!test_range_bit(io_tree, entry_end(ordered), i_size_test - 1,
EXTENT_DELALLOC, 0)) {
new_i_size = min_t(u64, i_size_test, i_size_read(inode));
}
BTRFS_I(inode)->disk_i_size = new_i_size;
out:
mutex_unlock(&tree->mutex);
return 0;
}
/*
* search the ordered extents for one corresponding to 'offset' and
* try to find a checksum. This is used because we allow pages to
* be reclaimed before their checksum is actually put into the btree
*/
int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr,
u32 *sum)
{
struct btrfs_ordered_sum *ordered_sum;
struct btrfs_sector_sum *sector_sums;
struct btrfs_ordered_extent *ordered;
struct btrfs_ordered_inode_tree *tree = &BTRFS_I(inode)->ordered_tree;
unsigned long num_sectors;
unsigned long i;
u32 sectorsize = BTRFS_I(inode)->root->sectorsize;
int ret = 1;
ordered = btrfs_lookup_ordered_extent(inode, offset);
if (!ordered)
return 1;
mutex_lock(&tree->mutex);
list_for_each_entry_reverse(ordered_sum, &ordered->list, list) {
if (disk_bytenr >= ordered_sum->bytenr) {
num_sectors = ordered_sum->len / sectorsize;
sector_sums = ordered_sum->sums;
for (i = 0; i < num_sectors; i++) {
if (sector_sums[i].bytenr == disk_bytenr) {
*sum = sector_sums[i].sum;
ret = 0;
goto out;
}
}
}
}
out:
mutex_unlock(&tree->mutex);
btrfs_put_ordered_extent(ordered);
return ret;
}
/**
* taken from mm/filemap.c because it isn't exported
*
* __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
* @mapping: address space structure to write
* @start: offset in bytes where the range starts
* @end: offset in bytes where the range ends (inclusive)
* @sync_mode: enable synchronous operation
*
* Start writeback against all of a mapping's dirty pages that lie
* within the byte offsets <start, end> inclusive.
*
* If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
* opposed to a regular memory cleansing writeback. The difference between
* these two operations is that if a dirty page/buffer is encountered, it must
* be waited upon, and not just skipped over.
*/
int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
loff_t end, int sync_mode)
{
struct writeback_control wbc = {
.sync_mode = sync_mode,
.nr_to_write = mapping->nrpages * 2,
.range_start = start,
.range_end = end,
.for_writepages = 1,
};
return btrfs_writepages(mapping, &wbc);
}
/**
* taken from mm/filemap.c because it isn't exported
*
* wait_on_page_writeback_range - wait for writeback to complete
* @mapping: target address_space
* @start: beginning page index
* @end: ending page index
*
* Wait for writeback to complete against pages indexed by start->end
* inclusive
*/
int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
pgoff_t start, pgoff_t end)
{
struct pagevec pvec;
int nr_pages;
int ret = 0;
pgoff_t index;
if (end < start)
return 0;
pagevec_init(&pvec, 0);
index = start;
while ((index <= end) &&
(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
PAGECACHE_TAG_WRITEBACK,
min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1)) != 0) {
unsigned i;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
/* until radix tree lookup accepts end_index */
if (page->index > end)
continue;
wait_on_page_writeback(page);
if (PageError(page))
ret = -EIO;
}
pagevec_release(&pvec);
cond_resched();
}
/* Check for outstanding write errors */
if (test_and_clear_bit(AS_ENOSPC, &mapping->flags))
ret = -ENOSPC;
if (test_and_clear_bit(AS_EIO, &mapping->flags))
ret = -EIO;
return ret;
}
/*
* add a given inode to the list of inodes that must be fully on
* disk before a transaction commit finishes.
*
* This basically gives us the ext3 style data=ordered mode, and it is mostly
* used to make sure renamed files are fully on disk.
*
* It is a noop if the inode is already fully on disk.
*
* If trans is not null, we'll do a friendly check for a transaction that
* is already flushing things and force the IO down ourselves.
*/
int btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode)
{
u64 last_mod;
last_mod = max(BTRFS_I(inode)->generation, BTRFS_I(inode)->last_trans);
/*
* if this file hasn't been changed since the last transaction
* commit, we can safely return without doing anything
*/
if (last_mod < root->fs_info->last_trans_committed)
return 0;
/*
* the transaction is already committing. Just start the IO and
* don't bother with all of this list nonsense
*/
if (trans && root->fs_info->running_transaction->blocked) {
btrfs_wait_ordered_range(inode, 0, (u64)-1);
return 0;
}
spin_lock(&root->fs_info->ordered_extent_lock);
if (list_empty(&BTRFS_I(inode)->ordered_operations)) {
list_add_tail(&BTRFS_I(inode)->ordered_operations,
&root->fs_info->ordered_operations);
}
spin_unlock(&root->fs_info->ordered_extent_lock);
return 0;
}