mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
d94dcbb101
There are two ways to mark a port as unimplemented. Typical way is to return port type as TB_TYPE_INACTIVE when its config space is read. Alternatively if the port is not physically present (such as ports 10 and 11 in ICL) reading from port config space returns TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails out from adding the switch if it receives any error during port inititialization which is wrong. Handle this properly and just leave the port as TB_TYPE_INACTIVE before continuing to the next port. This also allows us to get rid of special casing for Light Ridge port 5 in eeprom.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
591 lines
12 KiB
C
591 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Thunderbolt driver - eeprom access
|
|
*
|
|
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
|
|
* Copyright (C) 2018, Intel Corporation
|
|
*/
|
|
|
|
#include <linux/crc32.h>
|
|
#include <linux/property.h>
|
|
#include <linux/slab.h>
|
|
#include "tb.h"
|
|
|
|
/**
|
|
* tb_eeprom_ctl_write() - write control word
|
|
*/
|
|
static int tb_eeprom_ctl_write(struct tb_switch *sw, struct tb_eeprom_ctl *ctl)
|
|
{
|
|
return tb_sw_write(sw, ctl, TB_CFG_SWITCH, sw->cap_plug_events + 4, 1);
|
|
}
|
|
|
|
/**
|
|
* tb_eeprom_ctl_write() - read control word
|
|
*/
|
|
static int tb_eeprom_ctl_read(struct tb_switch *sw, struct tb_eeprom_ctl *ctl)
|
|
{
|
|
return tb_sw_read(sw, ctl, TB_CFG_SWITCH, sw->cap_plug_events + 4, 1);
|
|
}
|
|
|
|
enum tb_eeprom_transfer {
|
|
TB_EEPROM_IN,
|
|
TB_EEPROM_OUT,
|
|
};
|
|
|
|
/**
|
|
* tb_eeprom_active - enable rom access
|
|
*
|
|
* WARNING: Always disable access after usage. Otherwise the controller will
|
|
* fail to reprobe.
|
|
*/
|
|
static int tb_eeprom_active(struct tb_switch *sw, bool enable)
|
|
{
|
|
struct tb_eeprom_ctl ctl;
|
|
int res = tb_eeprom_ctl_read(sw, &ctl);
|
|
if (res)
|
|
return res;
|
|
if (enable) {
|
|
ctl.access_high = 1;
|
|
res = tb_eeprom_ctl_write(sw, &ctl);
|
|
if (res)
|
|
return res;
|
|
ctl.access_low = 0;
|
|
return tb_eeprom_ctl_write(sw, &ctl);
|
|
} else {
|
|
ctl.access_low = 1;
|
|
res = tb_eeprom_ctl_write(sw, &ctl);
|
|
if (res)
|
|
return res;
|
|
ctl.access_high = 0;
|
|
return tb_eeprom_ctl_write(sw, &ctl);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* tb_eeprom_transfer - transfer one bit
|
|
*
|
|
* If TB_EEPROM_IN is passed, then the bit can be retrieved from ctl->data_in.
|
|
* If TB_EEPROM_OUT is passed, then ctl->data_out will be written.
|
|
*/
|
|
static int tb_eeprom_transfer(struct tb_switch *sw, struct tb_eeprom_ctl *ctl,
|
|
enum tb_eeprom_transfer direction)
|
|
{
|
|
int res;
|
|
if (direction == TB_EEPROM_OUT) {
|
|
res = tb_eeprom_ctl_write(sw, ctl);
|
|
if (res)
|
|
return res;
|
|
}
|
|
ctl->clock = 1;
|
|
res = tb_eeprom_ctl_write(sw, ctl);
|
|
if (res)
|
|
return res;
|
|
if (direction == TB_EEPROM_IN) {
|
|
res = tb_eeprom_ctl_read(sw, ctl);
|
|
if (res)
|
|
return res;
|
|
}
|
|
ctl->clock = 0;
|
|
return tb_eeprom_ctl_write(sw, ctl);
|
|
}
|
|
|
|
/**
|
|
* tb_eeprom_out - write one byte to the bus
|
|
*/
|
|
static int tb_eeprom_out(struct tb_switch *sw, u8 val)
|
|
{
|
|
struct tb_eeprom_ctl ctl;
|
|
int i;
|
|
int res = tb_eeprom_ctl_read(sw, &ctl);
|
|
if (res)
|
|
return res;
|
|
for (i = 0; i < 8; i++) {
|
|
ctl.data_out = val & 0x80;
|
|
res = tb_eeprom_transfer(sw, &ctl, TB_EEPROM_OUT);
|
|
if (res)
|
|
return res;
|
|
val <<= 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_eeprom_in - read one byte from the bus
|
|
*/
|
|
static int tb_eeprom_in(struct tb_switch *sw, u8 *val)
|
|
{
|
|
struct tb_eeprom_ctl ctl;
|
|
int i;
|
|
int res = tb_eeprom_ctl_read(sw, &ctl);
|
|
if (res)
|
|
return res;
|
|
*val = 0;
|
|
for (i = 0; i < 8; i++) {
|
|
*val <<= 1;
|
|
res = tb_eeprom_transfer(sw, &ctl, TB_EEPROM_IN);
|
|
if (res)
|
|
return res;
|
|
*val |= ctl.data_in;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_eeprom_read_n - read count bytes from offset into val
|
|
*/
|
|
static int tb_eeprom_read_n(struct tb_switch *sw, u16 offset, u8 *val,
|
|
size_t count)
|
|
{
|
|
int i, res;
|
|
res = tb_eeprom_active(sw, true);
|
|
if (res)
|
|
return res;
|
|
res = tb_eeprom_out(sw, 3);
|
|
if (res)
|
|
return res;
|
|
res = tb_eeprom_out(sw, offset >> 8);
|
|
if (res)
|
|
return res;
|
|
res = tb_eeprom_out(sw, offset);
|
|
if (res)
|
|
return res;
|
|
for (i = 0; i < count; i++) {
|
|
res = tb_eeprom_in(sw, val + i);
|
|
if (res)
|
|
return res;
|
|
}
|
|
return tb_eeprom_active(sw, false);
|
|
}
|
|
|
|
static u8 tb_crc8(u8 *data, int len)
|
|
{
|
|
int i, j;
|
|
u8 val = 0xff;
|
|
for (i = 0; i < len; i++) {
|
|
val ^= data[i];
|
|
for (j = 0; j < 8; j++)
|
|
val = (val << 1) ^ ((val & 0x80) ? 7 : 0);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static u32 tb_crc32(void *data, size_t len)
|
|
{
|
|
return ~__crc32c_le(~0, data, len);
|
|
}
|
|
|
|
#define TB_DROM_DATA_START 13
|
|
struct tb_drom_header {
|
|
/* BYTE 0 */
|
|
u8 uid_crc8; /* checksum for uid */
|
|
/* BYTES 1-8 */
|
|
u64 uid;
|
|
/* BYTES 9-12 */
|
|
u32 data_crc32; /* checksum for data_len bytes starting at byte 13 */
|
|
/* BYTE 13 */
|
|
u8 device_rom_revision; /* should be <= 1 */
|
|
u16 data_len:10;
|
|
u8 __unknown1:6;
|
|
/* BYTES 16-21 */
|
|
u16 vendor_id;
|
|
u16 model_id;
|
|
u8 model_rev;
|
|
u8 eeprom_rev;
|
|
} __packed;
|
|
|
|
enum tb_drom_entry_type {
|
|
/* force unsigned to prevent "one-bit signed bitfield" warning */
|
|
TB_DROM_ENTRY_GENERIC = 0U,
|
|
TB_DROM_ENTRY_PORT,
|
|
};
|
|
|
|
struct tb_drom_entry_header {
|
|
u8 len;
|
|
u8 index:6;
|
|
bool port_disabled:1; /* only valid if type is TB_DROM_ENTRY_PORT */
|
|
enum tb_drom_entry_type type:1;
|
|
} __packed;
|
|
|
|
struct tb_drom_entry_generic {
|
|
struct tb_drom_entry_header header;
|
|
u8 data[0];
|
|
} __packed;
|
|
|
|
struct tb_drom_entry_port {
|
|
/* BYTES 0-1 */
|
|
struct tb_drom_entry_header header;
|
|
/* BYTE 2 */
|
|
u8 dual_link_port_rid:4;
|
|
u8 link_nr:1;
|
|
u8 unknown1:2;
|
|
bool has_dual_link_port:1;
|
|
|
|
/* BYTE 3 */
|
|
u8 dual_link_port_nr:6;
|
|
u8 unknown2:2;
|
|
|
|
/* BYTES 4 - 5 TODO decode */
|
|
u8 micro2:4;
|
|
u8 micro1:4;
|
|
u8 micro3;
|
|
|
|
/* BYTES 6-7, TODO: verify (find hardware that has these set) */
|
|
u8 peer_port_rid:4;
|
|
u8 unknown3:3;
|
|
bool has_peer_port:1;
|
|
u8 peer_port_nr:6;
|
|
u8 unknown4:2;
|
|
} __packed;
|
|
|
|
|
|
/**
|
|
* tb_eeprom_get_drom_offset - get drom offset within eeprom
|
|
*/
|
|
static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset)
|
|
{
|
|
struct tb_cap_plug_events cap;
|
|
int res;
|
|
if (!sw->cap_plug_events) {
|
|
tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n");
|
|
return -ENOSYS;
|
|
}
|
|
res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events,
|
|
sizeof(cap) / 4);
|
|
if (res)
|
|
return res;
|
|
|
|
if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) {
|
|
tb_sw_warn(sw, "no NVM\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
if (cap.drom_offset > 0xffff) {
|
|
tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n",
|
|
cap.drom_offset);
|
|
return -ENXIO;
|
|
}
|
|
*offset = cap.drom_offset;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_drom_read_uid_only - read uid directly from drom
|
|
*
|
|
* Does not use the cached copy in sw->drom. Used during resume to check switch
|
|
* identity.
|
|
*/
|
|
int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid)
|
|
{
|
|
u8 data[9];
|
|
u16 drom_offset;
|
|
u8 crc;
|
|
int res = tb_eeprom_get_drom_offset(sw, &drom_offset);
|
|
if (res)
|
|
return res;
|
|
|
|
if (drom_offset == 0)
|
|
return -ENODEV;
|
|
|
|
/* read uid */
|
|
res = tb_eeprom_read_n(sw, drom_offset, data, 9);
|
|
if (res)
|
|
return res;
|
|
|
|
crc = tb_crc8(data + 1, 8);
|
|
if (crc != data[0]) {
|
|
tb_sw_warn(sw, "uid crc8 mismatch (expected: %#x, got: %#x)\n",
|
|
data[0], crc);
|
|
return -EIO;
|
|
}
|
|
|
|
*uid = *(u64 *)(data+1);
|
|
return 0;
|
|
}
|
|
|
|
static int tb_drom_parse_entry_generic(struct tb_switch *sw,
|
|
struct tb_drom_entry_header *header)
|
|
{
|
|
const struct tb_drom_entry_generic *entry =
|
|
(const struct tb_drom_entry_generic *)header;
|
|
|
|
switch (header->index) {
|
|
case 1:
|
|
/* Length includes 2 bytes header so remove it before copy */
|
|
sw->vendor_name = kstrndup(entry->data,
|
|
header->len - sizeof(*header), GFP_KERNEL);
|
|
if (!sw->vendor_name)
|
|
return -ENOMEM;
|
|
break;
|
|
|
|
case 2:
|
|
sw->device_name = kstrndup(entry->data,
|
|
header->len - sizeof(*header), GFP_KERNEL);
|
|
if (!sw->device_name)
|
|
return -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tb_drom_parse_entry_port(struct tb_switch *sw,
|
|
struct tb_drom_entry_header *header)
|
|
{
|
|
struct tb_port *port;
|
|
int res;
|
|
enum tb_port_type type;
|
|
|
|
/*
|
|
* Some DROMs list more ports than the controller actually has
|
|
* so we skip those but allow the parser to continue.
|
|
*/
|
|
if (header->index > sw->config.max_port_number) {
|
|
dev_info_once(&sw->dev, "ignoring unnecessary extra entries in DROM\n");
|
|
return 0;
|
|
}
|
|
|
|
port = &sw->ports[header->index];
|
|
port->disabled = header->port_disabled;
|
|
if (port->disabled)
|
|
return 0;
|
|
|
|
res = tb_port_read(port, &type, TB_CFG_PORT, 2, 1);
|
|
if (res)
|
|
return res;
|
|
type &= 0xffffff;
|
|
|
|
if (type == TB_TYPE_PORT) {
|
|
struct tb_drom_entry_port *entry = (void *) header;
|
|
if (header->len != sizeof(*entry)) {
|
|
tb_sw_warn(sw,
|
|
"port entry has size %#x (expected %#zx)\n",
|
|
header->len, sizeof(struct tb_drom_entry_port));
|
|
return -EIO;
|
|
}
|
|
port->link_nr = entry->link_nr;
|
|
if (entry->has_dual_link_port)
|
|
port->dual_link_port =
|
|
&port->sw->ports[entry->dual_link_port_nr];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_drom_parse_entries - parse the linked list of drom entries
|
|
*
|
|
* Drom must have been copied to sw->drom.
|
|
*/
|
|
static int tb_drom_parse_entries(struct tb_switch *sw)
|
|
{
|
|
struct tb_drom_header *header = (void *) sw->drom;
|
|
u16 pos = sizeof(*header);
|
|
u16 drom_size = header->data_len + TB_DROM_DATA_START;
|
|
int res;
|
|
|
|
while (pos < drom_size) {
|
|
struct tb_drom_entry_header *entry = (void *) (sw->drom + pos);
|
|
if (pos + 1 == drom_size || pos + entry->len > drom_size
|
|
|| !entry->len) {
|
|
tb_sw_warn(sw, "drom buffer overrun, aborting\n");
|
|
return -EIO;
|
|
}
|
|
|
|
switch (entry->type) {
|
|
case TB_DROM_ENTRY_GENERIC:
|
|
res = tb_drom_parse_entry_generic(sw, entry);
|
|
break;
|
|
case TB_DROM_ENTRY_PORT:
|
|
res = tb_drom_parse_entry_port(sw, entry);
|
|
break;
|
|
}
|
|
if (res)
|
|
return res;
|
|
|
|
pos += entry->len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_drom_copy_efi - copy drom supplied by EFI to sw->drom if present
|
|
*/
|
|
static int tb_drom_copy_efi(struct tb_switch *sw, u16 *size)
|
|
{
|
|
struct device *dev = &sw->tb->nhi->pdev->dev;
|
|
int len, res;
|
|
|
|
len = device_property_count_u8(dev, "ThunderboltDROM");
|
|
if (len < 0 || len < sizeof(struct tb_drom_header))
|
|
return -EINVAL;
|
|
|
|
sw->drom = kmalloc(len, GFP_KERNEL);
|
|
if (!sw->drom)
|
|
return -ENOMEM;
|
|
|
|
res = device_property_read_u8_array(dev, "ThunderboltDROM", sw->drom,
|
|
len);
|
|
if (res)
|
|
goto err;
|
|
|
|
*size = ((struct tb_drom_header *)sw->drom)->data_len +
|
|
TB_DROM_DATA_START;
|
|
if (*size > len)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
kfree(sw->drom);
|
|
sw->drom = NULL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size)
|
|
{
|
|
u32 drom_offset;
|
|
int ret;
|
|
|
|
if (!sw->dma_port)
|
|
return -ENODEV;
|
|
|
|
ret = tb_sw_read(sw, &drom_offset, TB_CFG_SWITCH,
|
|
sw->cap_plug_events + 12, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!drom_offset)
|
|
return -ENODEV;
|
|
|
|
ret = dma_port_flash_read(sw->dma_port, drom_offset + 14, size,
|
|
sizeof(*size));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Size includes CRC8 + UID + CRC32 */
|
|
*size += 1 + 8 + 4;
|
|
sw->drom = kzalloc(*size, GFP_KERNEL);
|
|
if (!sw->drom)
|
|
return -ENOMEM;
|
|
|
|
ret = dma_port_flash_read(sw->dma_port, drom_offset, sw->drom, *size);
|
|
if (ret)
|
|
goto err_free;
|
|
|
|
/*
|
|
* Read UID from the minimal DROM because the one in NVM is just
|
|
* a placeholder.
|
|
*/
|
|
tb_drom_read_uid_only(sw, &sw->uid);
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(sw->drom);
|
|
sw->drom = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* tb_drom_read - copy drom to sw->drom and parse it
|
|
*/
|
|
int tb_drom_read(struct tb_switch *sw)
|
|
{
|
|
u16 drom_offset;
|
|
u16 size;
|
|
u32 crc;
|
|
struct tb_drom_header *header;
|
|
int res;
|
|
if (sw->drom)
|
|
return 0;
|
|
|
|
if (tb_route(sw) == 0) {
|
|
/*
|
|
* Apple's NHI EFI driver supplies a DROM for the root switch
|
|
* in a device property. Use it if available.
|
|
*/
|
|
if (tb_drom_copy_efi(sw, &size) == 0)
|
|
goto parse;
|
|
|
|
/* Non-Apple hardware has the DROM as part of NVM */
|
|
if (tb_drom_copy_nvm(sw, &size) == 0)
|
|
goto parse;
|
|
|
|
/*
|
|
* The root switch contains only a dummy drom (header only,
|
|
* no entries). Hardcode the configuration here.
|
|
*/
|
|
tb_drom_read_uid_only(sw, &sw->uid);
|
|
|
|
sw->ports[1].link_nr = 0;
|
|
sw->ports[2].link_nr = 1;
|
|
sw->ports[1].dual_link_port = &sw->ports[2];
|
|
sw->ports[2].dual_link_port = &sw->ports[1];
|
|
|
|
sw->ports[3].link_nr = 0;
|
|
sw->ports[4].link_nr = 1;
|
|
sw->ports[3].dual_link_port = &sw->ports[4];
|
|
sw->ports[4].dual_link_port = &sw->ports[3];
|
|
|
|
return 0;
|
|
}
|
|
|
|
res = tb_eeprom_get_drom_offset(sw, &drom_offset);
|
|
if (res)
|
|
return res;
|
|
|
|
res = tb_eeprom_read_n(sw, drom_offset + 14, (u8 *) &size, 2);
|
|
if (res)
|
|
return res;
|
|
size &= 0x3ff;
|
|
size += TB_DROM_DATA_START;
|
|
tb_sw_dbg(sw, "reading drom (length: %#x)\n", size);
|
|
if (size < sizeof(*header)) {
|
|
tb_sw_warn(sw, "drom too small, aborting\n");
|
|
return -EIO;
|
|
}
|
|
|
|
sw->drom = kzalloc(size, GFP_KERNEL);
|
|
if (!sw->drom)
|
|
return -ENOMEM;
|
|
res = tb_eeprom_read_n(sw, drom_offset, sw->drom, size);
|
|
if (res)
|
|
goto err;
|
|
|
|
parse:
|
|
header = (void *) sw->drom;
|
|
|
|
if (header->data_len + TB_DROM_DATA_START != size) {
|
|
tb_sw_warn(sw, "drom size mismatch, aborting\n");
|
|
goto err;
|
|
}
|
|
|
|
crc = tb_crc8((u8 *) &header->uid, 8);
|
|
if (crc != header->uid_crc8) {
|
|
tb_sw_warn(sw,
|
|
"drom uid crc8 mismatch (expected: %#x, got: %#x), aborting\n",
|
|
header->uid_crc8, crc);
|
|
goto err;
|
|
}
|
|
if (!sw->uid)
|
|
sw->uid = header->uid;
|
|
sw->vendor = header->vendor_id;
|
|
sw->device = header->model_id;
|
|
|
|
crc = tb_crc32(sw->drom + TB_DROM_DATA_START, header->data_len);
|
|
if (crc != header->data_crc32) {
|
|
tb_sw_warn(sw,
|
|
"drom data crc32 mismatch (expected: %#x, got: %#x), continuing\n",
|
|
header->data_crc32, crc);
|
|
}
|
|
|
|
if (header->device_rom_revision > 2)
|
|
tb_sw_warn(sw, "drom device_rom_revision %#x unknown\n",
|
|
header->device_rom_revision);
|
|
|
|
return tb_drom_parse_entries(sw);
|
|
err:
|
|
kfree(sw->drom);
|
|
sw->drom = NULL;
|
|
return -EIO;
|
|
|
|
}
|