mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 11:50:52 +07:00
1f7b71f20a
Change DSI driver to not print an error trace when probe is deferred for a clock resource. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1579602245-7577-1-git-send-email-yannick.fertre@st.com
503 lines
13 KiB
C
503 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
*
|
|
* Authors: Philippe Cornu <philippe.cornu@st.com>
|
|
* Yannick Fertre <yannick.fertre@st.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/bridge/dw_mipi_dsi.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
#define HWVER_130 0x31333000 /* IP version 1.30 */
|
|
#define HWVER_131 0x31333100 /* IP version 1.31 */
|
|
|
|
/* DSI digital registers & bit definitions */
|
|
#define DSI_VERSION 0x00
|
|
#define VERSION GENMASK(31, 8)
|
|
|
|
/* DSI wrapper registers & bit definitions */
|
|
/* Note: registers are named as in the Reference Manual */
|
|
#define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */
|
|
#define WCFGR_DSIM BIT(0) /* DSI Mode */
|
|
#define WCFGR_COLMUX GENMASK(3, 1) /* COLor MUltipleXing */
|
|
|
|
#define DSI_WCR 0x0404 /* Wrapper Control Reg */
|
|
#define WCR_DSIEN BIT(3) /* DSI ENable */
|
|
|
|
#define DSI_WISR 0x040C /* Wrapper Interrupt and Status Reg */
|
|
#define WISR_PLLLS BIT(8) /* PLL Lock Status */
|
|
#define WISR_RRS BIT(12) /* Regulator Ready Status */
|
|
|
|
#define DSI_WPCR0 0x0418 /* Wrapper Phy Conf Reg 0 */
|
|
#define WPCR0_UIX4 GENMASK(5, 0) /* Unit Interval X 4 */
|
|
#define WPCR0_TDDL BIT(16) /* Turn Disable Data Lanes */
|
|
|
|
#define DSI_WRPCR 0x0430 /* Wrapper Regulator & Pll Ctrl Reg */
|
|
#define WRPCR_PLLEN BIT(0) /* PLL ENable */
|
|
#define WRPCR_NDIV GENMASK(8, 2) /* pll loop DIVision Factor */
|
|
#define WRPCR_IDF GENMASK(14, 11) /* pll Input Division Factor */
|
|
#define WRPCR_ODF GENMASK(17, 16) /* pll Output Division Factor */
|
|
#define WRPCR_REGEN BIT(24) /* REGulator ENable */
|
|
#define WRPCR_BGREN BIT(28) /* BandGap Reference ENable */
|
|
#define IDF_MIN 1
|
|
#define IDF_MAX 7
|
|
#define NDIV_MIN 10
|
|
#define NDIV_MAX 125
|
|
#define ODF_MIN 1
|
|
#define ODF_MAX 8
|
|
|
|
/* dsi color format coding according to the datasheet */
|
|
enum dsi_color {
|
|
DSI_RGB565_CONF1,
|
|
DSI_RGB565_CONF2,
|
|
DSI_RGB565_CONF3,
|
|
DSI_RGB666_CONF1,
|
|
DSI_RGB666_CONF2,
|
|
DSI_RGB888,
|
|
};
|
|
|
|
#define LANE_MIN_KBPS 31250
|
|
#define LANE_MAX_KBPS 500000
|
|
|
|
/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
|
|
#define SLEEP_US 1000
|
|
#define TIMEOUT_US 200000
|
|
|
|
struct dw_mipi_dsi_stm {
|
|
void __iomem *base;
|
|
struct clk *pllref_clk;
|
|
struct dw_mipi_dsi *dsi;
|
|
u32 hw_version;
|
|
int lane_min_kbps;
|
|
int lane_max_kbps;
|
|
struct regulator *vdd_supply;
|
|
};
|
|
|
|
static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
|
|
{
|
|
writel(val, dsi->base + reg);
|
|
}
|
|
|
|
static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
|
|
{
|
|
return readl(dsi->base + reg);
|
|
}
|
|
|
|
static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
|
|
{
|
|
dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
|
|
}
|
|
|
|
static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
|
|
{
|
|
dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
|
|
}
|
|
|
|
static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
|
|
u32 mask, u32 val)
|
|
{
|
|
dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
|
|
}
|
|
|
|
static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
|
|
{
|
|
switch (fmt) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
return DSI_RGB888;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
return DSI_RGB666_CONF2;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
return DSI_RGB666_CONF1;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
return DSI_RGB565_CONF1;
|
|
default:
|
|
DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
|
|
}
|
|
return DSI_RGB888;
|
|
}
|
|
|
|
static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
|
|
{
|
|
int divisor = idf * odf;
|
|
|
|
/* prevent from division by 0 */
|
|
if (!divisor)
|
|
return 0;
|
|
|
|
return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
|
|
}
|
|
|
|
static int dsi_pll_get_params(struct dw_mipi_dsi_stm *dsi,
|
|
int clkin_khz, int clkout_khz,
|
|
int *idf, int *ndiv, int *odf)
|
|
{
|
|
int i, o, n, n_min, n_max;
|
|
int fvco_min, fvco_max, delta, best_delta; /* all in khz */
|
|
|
|
/* Early checks preventing division by 0 & odd results */
|
|
if (clkin_khz <= 0 || clkout_khz <= 0)
|
|
return -EINVAL;
|
|
|
|
fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX;
|
|
fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN;
|
|
|
|
best_delta = 1000000; /* big started value (1000000khz) */
|
|
|
|
for (i = IDF_MIN; i <= IDF_MAX; i++) {
|
|
/* Compute ndiv range according to Fvco */
|
|
n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
|
|
n_max = (fvco_max * i) / (2 * clkin_khz);
|
|
|
|
/* No need to continue idf loop if we reach ndiv max */
|
|
if (n_min >= NDIV_MAX)
|
|
break;
|
|
|
|
/* Clamp ndiv to valid values */
|
|
if (n_min < NDIV_MIN)
|
|
n_min = NDIV_MIN;
|
|
if (n_max > NDIV_MAX)
|
|
n_max = NDIV_MAX;
|
|
|
|
for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
|
|
n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
|
|
/* Check ndiv according to vco range */
|
|
if (n < n_min || n > n_max)
|
|
continue;
|
|
/* Check if new delta is better & saves parameters */
|
|
delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
|
|
clkout_khz;
|
|
if (delta < 0)
|
|
delta = -delta;
|
|
if (delta < best_delta) {
|
|
*idf = i;
|
|
*ndiv = n;
|
|
*odf = o;
|
|
best_delta = delta;
|
|
}
|
|
/* fast return in case of "perfect result" */
|
|
if (!delta)
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mipi_dsi_phy_init(void *priv_data)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = priv_data;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Enable the regulator */
|
|
dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
|
|
ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
|
|
SLEEP_US, TIMEOUT_US);
|
|
if (ret)
|
|
DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
|
|
|
|
/* Enable the DSI PLL & wait for its lock */
|
|
dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
|
|
ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
|
|
SLEEP_US, TIMEOUT_US);
|
|
if (ret)
|
|
DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mipi_dsi_phy_power_on(void *priv_data)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = priv_data;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
/* Enable the DSI wrapper */
|
|
dsi_set(dsi, DSI_WCR, WCR_DSIEN);
|
|
}
|
|
|
|
static void dw_mipi_dsi_phy_power_off(void *priv_data)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = priv_data;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
/* Disable the DSI wrapper */
|
|
dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
|
|
}
|
|
|
|
static int
|
|
dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
|
|
unsigned long mode_flags, u32 lanes, u32 format,
|
|
unsigned int *lane_mbps)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = priv_data;
|
|
unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
|
|
int ret, bpp;
|
|
u32 val;
|
|
|
|
/* Update lane capabilities according to hw version */
|
|
dsi->lane_min_kbps = LANE_MIN_KBPS;
|
|
dsi->lane_max_kbps = LANE_MAX_KBPS;
|
|
if (dsi->hw_version == HWVER_131) {
|
|
dsi->lane_min_kbps *= 2;
|
|
dsi->lane_max_kbps *= 2;
|
|
}
|
|
|
|
pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
|
|
|
|
/* Compute requested pll out */
|
|
bpp = mipi_dsi_pixel_format_to_bpp(format);
|
|
pll_out_khz = mode->clock * bpp / lanes;
|
|
|
|
/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
|
|
if (mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
|
|
pll_out_khz = (pll_out_khz * 12) / 10;
|
|
|
|
if (pll_out_khz > dsi->lane_max_kbps) {
|
|
pll_out_khz = dsi->lane_max_kbps;
|
|
DRM_WARN("Warning max phy mbps is used\n");
|
|
}
|
|
if (pll_out_khz < dsi->lane_min_kbps) {
|
|
pll_out_khz = dsi->lane_min_kbps;
|
|
DRM_WARN("Warning min phy mbps is used\n");
|
|
}
|
|
|
|
/* Compute best pll parameters */
|
|
idf = 0;
|
|
ndiv = 0;
|
|
odf = 0;
|
|
ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
|
|
&idf, &ndiv, &odf);
|
|
if (ret)
|
|
DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
|
|
|
|
/* Get the adjusted pll out value */
|
|
pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
|
|
|
|
/* Set the PLL division factors */
|
|
dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
|
|
(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
|
|
|
|
/* Compute uix4 & set the bit period in high-speed mode */
|
|
val = 4000000 / pll_out_khz;
|
|
dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
|
|
|
|
/* Select video mode by resetting DSIM bit */
|
|
dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
|
|
|
|
/* Select the color coding */
|
|
dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
|
|
dsi_color_from_mipi(format) << 1);
|
|
|
|
*lane_mbps = pll_out_khz / 1000;
|
|
|
|
DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
|
|
pll_in_khz, pll_out_khz, *lane_mbps);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
|
|
struct dw_mipi_dsi_dphy_timing *timing)
|
|
{
|
|
timing->clk_hs2lp = 0x40;
|
|
timing->clk_lp2hs = 0x40;
|
|
timing->data_hs2lp = 0x40;
|
|
timing->data_lp2hs = 0x40;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
|
|
.init = dw_mipi_dsi_phy_init,
|
|
.power_on = dw_mipi_dsi_phy_power_on,
|
|
.power_off = dw_mipi_dsi_phy_power_off,
|
|
.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
|
|
.get_timing = dw_mipi_dsi_phy_get_timing,
|
|
};
|
|
|
|
static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
|
|
.max_data_lanes = 2,
|
|
.phy_ops = &dw_mipi_dsi_stm_phy_ops,
|
|
};
|
|
|
|
static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
|
|
{ .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
|
|
|
|
static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_mipi_dsi_stm *dsi;
|
|
struct clk *pclk;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dsi->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dsi->base)) {
|
|
ret = PTR_ERR(dsi->base);
|
|
DRM_ERROR("Unable to get dsi registers %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dsi->vdd_supply = devm_regulator_get(dev, "phy-dsi");
|
|
if (IS_ERR(dsi->vdd_supply)) {
|
|
ret = PTR_ERR(dsi->vdd_supply);
|
|
if (ret != -EPROBE_DEFER)
|
|
DRM_ERROR("Failed to request regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(dsi->vdd_supply);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to enable regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dsi->pllref_clk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(dsi->pllref_clk)) {
|
|
ret = PTR_ERR(dsi->pllref_clk);
|
|
if (ret != -EPROBE_DEFER)
|
|
DRM_ERROR("Unable to get pll reference clock: %d\n",
|
|
ret);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->pllref_clk);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
pclk = devm_clk_get(dev, "pclk");
|
|
if (IS_ERR(pclk)) {
|
|
ret = PTR_ERR(pclk);
|
|
DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
|
|
goto err_dsi_probe;
|
|
}
|
|
|
|
ret = clk_prepare_enable(pclk);
|
|
if (ret) {
|
|
DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
|
|
goto err_dsi_probe;
|
|
}
|
|
|
|
dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
|
|
clk_disable_unprepare(pclk);
|
|
|
|
if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
|
|
ret = -ENODEV;
|
|
DRM_ERROR("bad dsi hardware version\n");
|
|
goto err_dsi_probe;
|
|
}
|
|
|
|
dw_mipi_dsi_stm_plat_data.base = dsi->base;
|
|
dw_mipi_dsi_stm_plat_data.priv_data = dsi;
|
|
|
|
platform_set_drvdata(pdev, dsi);
|
|
|
|
dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
|
|
if (IS_ERR(dsi->dsi)) {
|
|
ret = PTR_ERR(dsi->dsi);
|
|
DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
|
|
goto err_dsi_probe;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_dsi_probe:
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
err_clk_get:
|
|
regulator_disable(dsi->vdd_supply);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
|
|
|
|
dw_mipi_dsi_remove(dsi->dsi);
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
regulator_disable(dsi->vdd_supply);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
regulator_disable(dsi->vdd_supply);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
|
|
{
|
|
struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
|
|
int ret;
|
|
|
|
DRM_DEBUG_DRIVER("\n");
|
|
|
|
ret = regulator_enable(dsi->vdd_supply);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to enable regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->pllref_clk);
|
|
if (ret) {
|
|
regulator_disable(dsi->vdd_supply);
|
|
DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops dw_mipi_dsi_stm_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(dw_mipi_dsi_stm_suspend,
|
|
dw_mipi_dsi_stm_resume)
|
|
};
|
|
|
|
static struct platform_driver dw_mipi_dsi_stm_driver = {
|
|
.probe = dw_mipi_dsi_stm_probe,
|
|
.remove = dw_mipi_dsi_stm_remove,
|
|
.driver = {
|
|
.of_match_table = dw_mipi_dsi_stm_dt_ids,
|
|
.name = "stm32-display-dsi",
|
|
.pm = &dw_mipi_dsi_stm_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mipi_dsi_stm_driver);
|
|
|
|
MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
|
|
MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
|
|
MODULE_LICENSE("GPL v2");
|