mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:55:04 +07:00
1ca8bf6f7b
Certain ARM CPU implementations (e.g. Cortex-A15) may not raise a floating- point exception whenever deprecated short-vector VFP instructions are executed. Instead these instructions are treated as UNALLOCATED. Change the VFP exception handling code to emulate short-vector instructions even if FPEXC exception bits are not set. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
324 lines
8.7 KiB
ArmAsm
324 lines
8.7 KiB
ArmAsm
/*
|
|
* linux/arch/arm/vfp/vfphw.S
|
|
*
|
|
* Copyright (C) 2004 ARM Limited.
|
|
* Written by Deep Blue Solutions Limited.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This code is called from the kernel's undefined instruction trap.
|
|
* r9 holds the return address for successful handling.
|
|
* lr holds the return address for unrecognised instructions.
|
|
* r10 points at the start of the private FP workspace in the thread structure
|
|
* sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/vfpmacros.h>
|
|
#include <linux/kern_levels.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
.macro DBGSTR, str
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
ldr r0, =1f
|
|
bl printk
|
|
ldmfd sp!, {r0-r3, ip, lr}
|
|
|
|
.pushsection .rodata, "a"
|
|
1: .ascii KERN_DEBUG "VFP: \str\n"
|
|
.byte 0
|
|
.previous
|
|
#endif
|
|
.endm
|
|
|
|
.macro DBGSTR1, str, arg
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r1, \arg
|
|
ldr r0, =1f
|
|
bl printk
|
|
ldmfd sp!, {r0-r3, ip, lr}
|
|
|
|
.pushsection .rodata, "a"
|
|
1: .ascii KERN_DEBUG "VFP: \str\n"
|
|
.byte 0
|
|
.previous
|
|
#endif
|
|
.endm
|
|
|
|
.macro DBGSTR3, str, arg1, arg2, arg3
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r3, \arg3
|
|
mov r2, \arg2
|
|
mov r1, \arg1
|
|
ldr r0, =1f
|
|
bl printk
|
|
ldmfd sp!, {r0-r3, ip, lr}
|
|
|
|
.pushsection .rodata, "a"
|
|
1: .ascii KERN_DEBUG "VFP: \str\n"
|
|
.byte 0
|
|
.previous
|
|
#endif
|
|
.endm
|
|
|
|
|
|
@ VFP hardware support entry point.
|
|
@
|
|
@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
|
|
@ r2 = PC value to resume execution after successful emulation
|
|
@ r9 = normal "successful" return address
|
|
@ r10 = vfp_state union
|
|
@ r11 = CPU number
|
|
@ lr = unrecognised instruction return address
|
|
@ IRQs enabled.
|
|
ENTRY(vfp_support_entry)
|
|
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
|
|
|
|
ldr r3, [sp, #S_PSR] @ Neither lazy restore nor FP exceptions
|
|
and r3, r3, #MODE_MASK @ are supported in kernel mode
|
|
teq r3, #USR_MODE
|
|
bne vfp_kmode_exception @ Returns through lr
|
|
|
|
VFPFMRX r1, FPEXC @ Is the VFP enabled?
|
|
DBGSTR1 "fpexc %08x", r1
|
|
tst r1, #FPEXC_EN
|
|
bne look_for_VFP_exceptions @ VFP is already enabled
|
|
|
|
DBGSTR1 "enable %x", r10
|
|
ldr r3, vfp_current_hw_state_address
|
|
orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set
|
|
ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer
|
|
bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled
|
|
cmp r4, r10 @ this thread owns the hw context?
|
|
#ifndef CONFIG_SMP
|
|
@ For UP, checking that this thread owns the hw context is
|
|
@ sufficient to determine that the hardware state is valid.
|
|
beq vfp_hw_state_valid
|
|
|
|
@ On UP, we lazily save the VFP context. As a different
|
|
@ thread wants ownership of the VFP hardware, save the old
|
|
@ state if there was a previous (valid) owner.
|
|
|
|
VFPFMXR FPEXC, r5 @ enable VFP, disable any pending
|
|
@ exceptions, so we can get at the
|
|
@ rest of it
|
|
|
|
DBGSTR1 "save old state %p", r4
|
|
cmp r4, #0 @ if the vfp_current_hw_state is NULL
|
|
beq vfp_reload_hw @ then the hw state needs reloading
|
|
VFPFSTMIA r4, r5 @ save the working registers
|
|
VFPFMRX r5, FPSCR @ current status
|
|
#ifndef CONFIG_CPU_FEROCEON
|
|
tst r1, #FPEXC_EX @ is there additional state to save?
|
|
beq 1f
|
|
VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
|
|
beq 1f
|
|
VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present)
|
|
1:
|
|
#endif
|
|
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
|
|
vfp_reload_hw:
|
|
|
|
#else
|
|
@ For SMP, if this thread does not own the hw context, then we
|
|
@ need to reload it. No need to save the old state as on SMP,
|
|
@ we always save the state when we switch away from a thread.
|
|
bne vfp_reload_hw
|
|
|
|
@ This thread has ownership of the current hardware context.
|
|
@ However, it may have been migrated to another CPU, in which
|
|
@ case the saved state is newer than the hardware context.
|
|
@ Check this by looking at the CPU number which the state was
|
|
@ last loaded onto.
|
|
ldr ip, [r10, #VFP_CPU]
|
|
teq ip, r11
|
|
beq vfp_hw_state_valid
|
|
|
|
vfp_reload_hw:
|
|
@ We're loading this threads state into the VFP hardware. Update
|
|
@ the CPU number which contains the most up to date VFP context.
|
|
str r11, [r10, #VFP_CPU]
|
|
|
|
VFPFMXR FPEXC, r5 @ enable VFP, disable any pending
|
|
@ exceptions, so we can get at the
|
|
@ rest of it
|
|
#endif
|
|
|
|
DBGSTR1 "load state %p", r10
|
|
str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer
|
|
@ Load the saved state back into the VFP
|
|
VFPFLDMIA r10, r5 @ reload the working registers while
|
|
@ FPEXC is in a safe state
|
|
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
|
|
#ifndef CONFIG_CPU_FEROCEON
|
|
tst r1, #FPEXC_EX @ is there additional state to restore?
|
|
beq 1f
|
|
VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to write?
|
|
beq 1f
|
|
VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present)
|
|
1:
|
|
#endif
|
|
VFPFMXR FPSCR, r5 @ restore status
|
|
|
|
@ The context stored in the VFP hardware is up to date with this thread
|
|
vfp_hw_state_valid:
|
|
tst r1, #FPEXC_EX
|
|
bne process_exception @ might as well handle the pending
|
|
@ exception before retrying branch
|
|
@ out before setting an FPEXC that
|
|
@ stops us reading stuff
|
|
VFPFMXR FPEXC, r1 @ Restore FPEXC last
|
|
sub r2, r2, #4 @ Retry current instruction - if Thumb
|
|
str r2, [sp, #S_PC] @ mode it's two 16-bit instructions,
|
|
@ else it's one 32-bit instruction, so
|
|
@ always subtract 4 from the following
|
|
@ instruction address.
|
|
dec_preempt_count_ti r10, r4
|
|
ret r9 @ we think we have handled things
|
|
|
|
|
|
look_for_VFP_exceptions:
|
|
@ Check for synchronous or asynchronous exception
|
|
tst r1, #FPEXC_EX | FPEXC_DEX
|
|
bne process_exception
|
|
@ On some implementations of the VFP subarch 1, setting FPSCR.IXE
|
|
@ causes all the CDP instructions to be bounced synchronously without
|
|
@ setting the FPEXC.EX bit
|
|
VFPFMRX r5, FPSCR
|
|
tst r5, #FPSCR_IXE
|
|
bne process_exception
|
|
|
|
tst r5, #FPSCR_LENGTH_MASK
|
|
beq skip
|
|
orr r1, r1, #FPEXC_DEX
|
|
b process_exception
|
|
skip:
|
|
|
|
@ Fall into hand on to next handler - appropriate coproc instr
|
|
@ not recognised by VFP
|
|
|
|
DBGSTR "not VFP"
|
|
dec_preempt_count_ti r10, r4
|
|
ret lr
|
|
|
|
process_exception:
|
|
DBGSTR "bounce"
|
|
mov r2, sp @ nothing stacked - regdump is at TOS
|
|
mov lr, r9 @ setup for a return to the user code.
|
|
|
|
@ Now call the C code to package up the bounce to the support code
|
|
@ r0 holds the trigger instruction
|
|
@ r1 holds the FPEXC value
|
|
@ r2 pointer to register dump
|
|
b VFP_bounce @ we have handled this - the support
|
|
@ code will raise an exception if
|
|
@ required. If not, the user code will
|
|
@ retry the faulted instruction
|
|
ENDPROC(vfp_support_entry)
|
|
|
|
ENTRY(vfp_save_state)
|
|
@ Save the current VFP state
|
|
@ r0 - save location
|
|
@ r1 - FPEXC
|
|
DBGSTR1 "save VFP state %p", r0
|
|
VFPFSTMIA r0, r2 @ save the working registers
|
|
VFPFMRX r2, FPSCR @ current status
|
|
tst r1, #FPEXC_EX @ is there additional state to save?
|
|
beq 1f
|
|
VFPFMRX r3, FPINST @ FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
|
|
beq 1f
|
|
VFPFMRX r12, FPINST2 @ FPINST2 if needed (and present)
|
|
1:
|
|
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
|
|
ret lr
|
|
ENDPROC(vfp_save_state)
|
|
|
|
.align
|
|
vfp_current_hw_state_address:
|
|
.word vfp_current_hw_state
|
|
|
|
.macro tbl_branch, base, tmp, shift
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
adr \tmp, 1f
|
|
add \tmp, \tmp, \base, lsl \shift
|
|
ret \tmp
|
|
#else
|
|
add pc, pc, \base, lsl \shift
|
|
mov r0, r0
|
|
#endif
|
|
1:
|
|
.endm
|
|
|
|
ENTRY(vfp_get_float)
|
|
tbl_branch r0, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
|
|
ret lr
|
|
.org 1b + 8
|
|
1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
ENDPROC(vfp_get_float)
|
|
|
|
ENTRY(vfp_put_float)
|
|
tbl_branch r1, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
|
|
ret lr
|
|
.org 1b + 8
|
|
1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
ENDPROC(vfp_put_float)
|
|
|
|
ENTRY(vfp_get_double)
|
|
tbl_branch r0, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: fmrrd r0, r1, d\dr
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
#ifdef CONFIG_VFPv3
|
|
@ d16 - d31 registers
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
#endif
|
|
|
|
@ virtual register 16 (or 32 if VFPv3) for compare with zero
|
|
mov r0, #0
|
|
mov r1, #0
|
|
ret lr
|
|
ENDPROC(vfp_get_double)
|
|
|
|
ENTRY(vfp_put_double)
|
|
tbl_branch r2, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: fmdrr d\dr, r0, r1
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
#ifdef CONFIG_VFPv3
|
|
@ d16 - d31 registers
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
|
|
ret lr
|
|
.org 1b + 8
|
|
.endr
|
|
#endif
|
|
ENDPROC(vfp_put_double)
|