mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
8c74c4561f
DU channels not equipped with a DPLL use an SoC internal (provided by
the CPG) or external clock source combined with a DU internal divider to
generate the desired output dot clock frequency.
The current clock selection procedure does not fully exploit the ability
of external clock sources to generate the exact dot clock frequency by
themselves, but relies instead on tuning the internal DU clock divider
only, resulting in a less precise clock generation process.
When possible, and desirable, ask the external clock source for the
exact output dot clock frequency, and select the clock source that
produces the frequency closest to the desired output dot clock.
This patch specifically targets platforms (like Salvator-X[S] and ULCBs)
where the DU's input dotclock.in is generated by the versaclock VC5
clock source, which is capable of generating the exact rate the DU needs
as pixel clock output.
This patch fixes higher resolution modes which requires an high pixel
clock output currently not working on non-HDMI DU channel (such as
1920x1080@60Hz on the VGA output).
Fixes: 1b30dbde85
("drm: rcar-du: Add support for external pixel clock")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
[Factor out code to a helper function]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
1157 lines
30 KiB
C
1157 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* rcar_du_crtc.c -- R-Car Display Unit CRTCs
|
|
*
|
|
* Copyright (C) 2013-2015 Renesas Electronics Corporation
|
|
*
|
|
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sys_soc.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_fb_cma_helper.h>
|
|
#include <drm/drm_gem_cma_helper.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
|
|
#include "rcar_du_crtc.h"
|
|
#include "rcar_du_drv.h"
|
|
#include "rcar_du_kms.h"
|
|
#include "rcar_du_plane.h"
|
|
#include "rcar_du_regs.h"
|
|
#include "rcar_du_vsp.h"
|
|
|
|
static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
return rcar_du_read(rcdu, rcrtc->mmio_offset + reg);
|
|
}
|
|
|
|
static void rcar_du_crtc_write(struct rcar_du_crtc *rcrtc, u32 reg, u32 data)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
rcar_du_write(rcdu, rcrtc->mmio_offset + reg, data);
|
|
}
|
|
|
|
static void rcar_du_crtc_clr(struct rcar_du_crtc *rcrtc, u32 reg, u32 clr)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
rcar_du_write(rcdu, rcrtc->mmio_offset + reg,
|
|
rcar_du_read(rcdu, rcrtc->mmio_offset + reg) & ~clr);
|
|
}
|
|
|
|
static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
rcar_du_write(rcdu, rcrtc->mmio_offset + reg,
|
|
rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set);
|
|
}
|
|
|
|
static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg,
|
|
u32 clr, u32 set)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
u32 value = rcar_du_read(rcdu, rcrtc->mmio_offset + reg);
|
|
|
|
rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set);
|
|
}
|
|
|
|
static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(rcrtc->clock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(rcrtc->extclock);
|
|
if (ret < 0)
|
|
goto error_clock;
|
|
|
|
ret = rcar_du_group_get(rcrtc->group);
|
|
if (ret < 0)
|
|
goto error_group;
|
|
|
|
return 0;
|
|
|
|
error_group:
|
|
clk_disable_unprepare(rcrtc->extclock);
|
|
error_clock:
|
|
clk_disable_unprepare(rcrtc->clock);
|
|
return ret;
|
|
}
|
|
|
|
static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
rcar_du_group_put(rcrtc->group);
|
|
|
|
clk_disable_unprepare(rcrtc->extclock);
|
|
clk_disable_unprepare(rcrtc->clock);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Hardware Setup
|
|
*/
|
|
|
|
struct dpll_info {
|
|
unsigned int output;
|
|
unsigned int fdpll;
|
|
unsigned int n;
|
|
unsigned int m;
|
|
};
|
|
|
|
static void rcar_du_dpll_divider(struct rcar_du_crtc *rcrtc,
|
|
struct dpll_info *dpll,
|
|
unsigned long input,
|
|
unsigned long target)
|
|
{
|
|
unsigned long best_diff = (unsigned long)-1;
|
|
unsigned long diff;
|
|
unsigned int fdpll;
|
|
unsigned int m;
|
|
unsigned int n;
|
|
|
|
/*
|
|
* fin fvco fout fclkout
|
|
* in --> [1/M] --> |PD| -> [LPF] -> [VCO] -> [1/P] -+-> [1/FDPLL] -> out
|
|
* +-> | | |
|
|
* | |
|
|
* +---------------- [1/N] <------------+
|
|
*
|
|
* fclkout = fvco / P / FDPLL -- (1)
|
|
*
|
|
* fin/M = fvco/P/N
|
|
*
|
|
* fvco = fin * P * N / M -- (2)
|
|
*
|
|
* (1) + (2) indicates
|
|
*
|
|
* fclkout = fin * N / M / FDPLL
|
|
*
|
|
* NOTES
|
|
* N : (n + 1)
|
|
* M : (m + 1)
|
|
* FDPLL : (fdpll + 1)
|
|
* P : 2
|
|
* 2kHz < fvco < 4096MHz
|
|
*
|
|
* To minimize the jitter,
|
|
* N : as large as possible
|
|
* M : as small as possible
|
|
*/
|
|
for (m = 0; m < 4; m++) {
|
|
for (n = 119; n > 38; n--) {
|
|
/*
|
|
* This code only runs on 64-bit architectures, the
|
|
* unsigned long type can thus be used for 64-bit
|
|
* computation. It will still compile without any
|
|
* warning on 32-bit architectures.
|
|
*
|
|
* To optimize calculations, use fout instead of fvco
|
|
* to verify the VCO frequency constraint.
|
|
*/
|
|
unsigned long fout = input * (n + 1) / (m + 1);
|
|
|
|
if (fout < 1000 || fout > 2048 * 1000 * 1000U)
|
|
continue;
|
|
|
|
for (fdpll = 1; fdpll < 32; fdpll++) {
|
|
unsigned long output;
|
|
|
|
output = fout / (fdpll + 1);
|
|
if (output >= 400 * 1000 * 1000)
|
|
continue;
|
|
|
|
diff = abs((long)output - (long)target);
|
|
if (best_diff > diff) {
|
|
best_diff = diff;
|
|
dpll->n = n;
|
|
dpll->m = m;
|
|
dpll->fdpll = fdpll;
|
|
dpll->output = output;
|
|
}
|
|
|
|
if (diff == 0)
|
|
goto done;
|
|
}
|
|
}
|
|
}
|
|
|
|
done:
|
|
dev_dbg(rcrtc->group->dev->dev,
|
|
"output:%u, fdpll:%u, n:%u, m:%u, diff:%lu\n",
|
|
dpll->output, dpll->fdpll, dpll->n, dpll->m,
|
|
best_diff);
|
|
}
|
|
|
|
struct du_clk_params {
|
|
struct clk *clk;
|
|
unsigned long rate;
|
|
unsigned long diff;
|
|
u32 escr;
|
|
};
|
|
|
|
static void rcar_du_escr_divider(struct clk *clk, unsigned long target,
|
|
u32 escr, struct du_clk_params *params)
|
|
{
|
|
unsigned long rate;
|
|
unsigned long diff;
|
|
u32 div;
|
|
|
|
/*
|
|
* If the target rate has already been achieved perfectly we can't do
|
|
* better.
|
|
*/
|
|
if (params->diff == 0)
|
|
return;
|
|
|
|
/*
|
|
* Compute the input clock rate and internal divisor values to obtain
|
|
* the clock rate closest to the target frequency.
|
|
*/
|
|
rate = clk_round_rate(clk, target);
|
|
div = clamp(DIV_ROUND_CLOSEST(rate, target), 1UL, 64UL) - 1;
|
|
diff = abs(rate / (div + 1) - target);
|
|
|
|
/*
|
|
* Store the parameters if the resulting frequency is better than any
|
|
* previously calculated value.
|
|
*/
|
|
if (diff < params->diff) {
|
|
params->clk = clk;
|
|
params->rate = rate;
|
|
params->diff = diff;
|
|
params->escr = escr | div;
|
|
}
|
|
}
|
|
|
|
static const struct soc_device_attribute rcar_du_r8a7795_es1[] = {
|
|
{ .soc_id = "r8a7795", .revision = "ES1.*" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
unsigned long mode_clock = mode->clock * 1000;
|
|
u32 dsmr;
|
|
u32 escr;
|
|
|
|
if (rcdu->info->dpll_ch & (1 << rcrtc->index)) {
|
|
unsigned long target = mode_clock;
|
|
struct dpll_info dpll = { 0 };
|
|
unsigned long extclk;
|
|
u32 dpllcr;
|
|
u32 div = 0;
|
|
|
|
/*
|
|
* DU channels that have a display PLL can't use the internal
|
|
* system clock, and have no internal clock divider.
|
|
*/
|
|
|
|
if (WARN_ON(!rcrtc->extclock))
|
|
return;
|
|
|
|
/*
|
|
* The H3 ES1.x exhibits dot clock duty cycle stability issues.
|
|
* We can work around them by configuring the DPLL to twice the
|
|
* desired frequency, coupled with a /2 post-divider. Restrict
|
|
* the workaround to H3 ES1.x as ES2.0 and all other SoCs have
|
|
* no post-divider when a display PLL is present (as shown by
|
|
* the workaround breaking HDMI output on M3-W during testing).
|
|
*/
|
|
if (soc_device_match(rcar_du_r8a7795_es1)) {
|
|
target *= 2;
|
|
div = 1;
|
|
}
|
|
|
|
extclk = clk_get_rate(rcrtc->extclock);
|
|
rcar_du_dpll_divider(rcrtc, &dpll, extclk, target);
|
|
|
|
dpllcr = DPLLCR_CODE | DPLLCR_CLKE
|
|
| DPLLCR_FDPLL(dpll.fdpll)
|
|
| DPLLCR_N(dpll.n) | DPLLCR_M(dpll.m)
|
|
| DPLLCR_STBY;
|
|
|
|
if (rcrtc->index == 1)
|
|
dpllcr |= DPLLCR_PLCS1
|
|
| DPLLCR_INCS_DOTCLKIN1;
|
|
else
|
|
dpllcr |= DPLLCR_PLCS0
|
|
| DPLLCR_INCS_DOTCLKIN0;
|
|
|
|
rcar_du_group_write(rcrtc->group, DPLLCR, dpllcr);
|
|
|
|
escr = ESCR_DCLKSEL_DCLKIN | div;
|
|
} else {
|
|
struct du_clk_params params = { .diff = (unsigned long)-1 };
|
|
|
|
rcar_du_escr_divider(rcrtc->clock, mode_clock,
|
|
ESCR_DCLKSEL_CLKS, ¶ms);
|
|
if (rcrtc->extclock)
|
|
rcar_du_escr_divider(rcrtc->extclock, mode_clock,
|
|
ESCR_DCLKSEL_DCLKIN, ¶ms);
|
|
|
|
dev_dbg(rcrtc->group->dev->dev, "mode clock %lu %s rate %lu\n",
|
|
mode_clock, params.clk == rcrtc->clock ? "cpg" : "ext",
|
|
params.rate);
|
|
|
|
clk_set_rate(params.clk, params.rate);
|
|
escr = params.escr;
|
|
}
|
|
|
|
dev_dbg(rcrtc->group->dev->dev, "%s: ESCR 0x%08x\n", __func__, escr);
|
|
|
|
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR,
|
|
escr);
|
|
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
|
|
|
|
/* Signal polarities */
|
|
dsmr = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0)
|
|
| ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DSMR_HSL : 0)
|
|
| ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? DSMR_ODEV : 0)
|
|
| DSMR_DIPM_DISP | DSMR_CSPM;
|
|
rcar_du_crtc_write(rcrtc, DSMR, dsmr);
|
|
|
|
/* Display timings */
|
|
rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19);
|
|
rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start +
|
|
mode->hdisplay - 19);
|
|
rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end -
|
|
mode->hsync_start - 1);
|
|
rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1);
|
|
|
|
rcar_du_crtc_write(rcrtc, VDSR, mode->crtc_vtotal -
|
|
mode->crtc_vsync_end - 2);
|
|
rcar_du_crtc_write(rcrtc, VDER, mode->crtc_vtotal -
|
|
mode->crtc_vsync_end +
|
|
mode->crtc_vdisplay - 2);
|
|
rcar_du_crtc_write(rcrtc, VSPR, mode->crtc_vtotal -
|
|
mode->crtc_vsync_end +
|
|
mode->crtc_vsync_start - 1);
|
|
rcar_du_crtc_write(rcrtc, VCR, mode->crtc_vtotal - 1);
|
|
|
|
rcar_du_crtc_write(rcrtc, DESR, mode->htotal - mode->hsync_start - 1);
|
|
rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay);
|
|
}
|
|
|
|
void rcar_du_crtc_route_output(struct drm_crtc *crtc,
|
|
enum rcar_du_output output)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
/*
|
|
* Store the route from the CRTC output to the DU output. The DU will be
|
|
* configured when starting the CRTC.
|
|
*/
|
|
rcrtc->outputs |= BIT(output);
|
|
|
|
/*
|
|
* Store RGB routing to DPAD0, the hardware will be configured when
|
|
* starting the CRTC.
|
|
*/
|
|
if (output == RCAR_DU_OUTPUT_DPAD0)
|
|
rcdu->dpad0_source = rcrtc->index;
|
|
}
|
|
|
|
static unsigned int plane_zpos(struct rcar_du_plane *plane)
|
|
{
|
|
return plane->plane.state->normalized_zpos;
|
|
}
|
|
|
|
static const struct rcar_du_format_info *
|
|
plane_format(struct rcar_du_plane *plane)
|
|
{
|
|
return to_rcar_plane_state(plane->plane.state)->format;
|
|
}
|
|
|
|
static void rcar_du_crtc_update_planes(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct rcar_du_plane *planes[RCAR_DU_NUM_HW_PLANES];
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
unsigned int num_planes = 0;
|
|
unsigned int dptsr_planes;
|
|
unsigned int hwplanes = 0;
|
|
unsigned int prio = 0;
|
|
unsigned int i;
|
|
u32 dspr = 0;
|
|
|
|
for (i = 0; i < rcrtc->group->num_planes; ++i) {
|
|
struct rcar_du_plane *plane = &rcrtc->group->planes[i];
|
|
unsigned int j;
|
|
|
|
if (plane->plane.state->crtc != &rcrtc->crtc ||
|
|
!plane->plane.state->visible)
|
|
continue;
|
|
|
|
/* Insert the plane in the sorted planes array. */
|
|
for (j = num_planes++; j > 0; --j) {
|
|
if (plane_zpos(planes[j-1]) <= plane_zpos(plane))
|
|
break;
|
|
planes[j] = planes[j-1];
|
|
}
|
|
|
|
planes[j] = plane;
|
|
prio += plane_format(plane)->planes * 4;
|
|
}
|
|
|
|
for (i = 0; i < num_planes; ++i) {
|
|
struct rcar_du_plane *plane = planes[i];
|
|
struct drm_plane_state *state = plane->plane.state;
|
|
unsigned int index = to_rcar_plane_state(state)->hwindex;
|
|
|
|
prio -= 4;
|
|
dspr |= (index + 1) << prio;
|
|
hwplanes |= 1 << index;
|
|
|
|
if (plane_format(plane)->planes == 2) {
|
|
index = (index + 1) % 8;
|
|
|
|
prio -= 4;
|
|
dspr |= (index + 1) << prio;
|
|
hwplanes |= 1 << index;
|
|
}
|
|
}
|
|
|
|
/* If VSP+DU integration is enabled the plane assignment is fixed. */
|
|
if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) {
|
|
if (rcdu->info->gen < 3) {
|
|
dspr = (rcrtc->index % 2) + 1;
|
|
hwplanes = 1 << (rcrtc->index % 2);
|
|
} else {
|
|
dspr = (rcrtc->index % 2) ? 3 : 1;
|
|
hwplanes = 1 << ((rcrtc->index % 2) ? 2 : 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update the planes to display timing and dot clock generator
|
|
* associations.
|
|
*
|
|
* Updating the DPTSR register requires restarting the CRTC group,
|
|
* resulting in visible flicker. To mitigate the issue only update the
|
|
* association if needed by enabled planes. Planes being disabled will
|
|
* keep their current association.
|
|
*/
|
|
mutex_lock(&rcrtc->group->lock);
|
|
|
|
dptsr_planes = rcrtc->index % 2 ? rcrtc->group->dptsr_planes | hwplanes
|
|
: rcrtc->group->dptsr_planes & ~hwplanes;
|
|
|
|
if (dptsr_planes != rcrtc->group->dptsr_planes) {
|
|
rcar_du_group_write(rcrtc->group, DPTSR,
|
|
(dptsr_planes << 16) | dptsr_planes);
|
|
rcrtc->group->dptsr_planes = dptsr_planes;
|
|
|
|
if (rcrtc->group->used_crtcs)
|
|
rcar_du_group_restart(rcrtc->group);
|
|
}
|
|
|
|
/* Restart the group if plane sources have changed. */
|
|
if (rcrtc->group->need_restart)
|
|
rcar_du_group_restart(rcrtc->group);
|
|
|
|
mutex_unlock(&rcrtc->group->lock);
|
|
|
|
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR,
|
|
dspr);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Page Flip
|
|
*/
|
|
|
|
void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct drm_pending_vblank_event *event;
|
|
struct drm_device *dev = rcrtc->crtc.dev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
event = rcrtc->event;
|
|
rcrtc->event = NULL;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
if (event == NULL)
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
drm_crtc_send_vblank_event(&rcrtc->crtc, event);
|
|
wake_up(&rcrtc->flip_wait);
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
drm_crtc_vblank_put(&rcrtc->crtc);
|
|
}
|
|
|
|
static bool rcar_du_crtc_page_flip_pending(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct drm_device *dev = rcrtc->crtc.dev;
|
|
unsigned long flags;
|
|
bool pending;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
pending = rcrtc->event != NULL;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
return pending;
|
|
}
|
|
|
|
static void rcar_du_crtc_wait_page_flip(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
|
|
if (wait_event_timeout(rcrtc->flip_wait,
|
|
!rcar_du_crtc_page_flip_pending(rcrtc),
|
|
msecs_to_jiffies(50)))
|
|
return;
|
|
|
|
dev_warn(rcdu->dev, "page flip timeout\n");
|
|
|
|
rcar_du_crtc_finish_page_flip(rcrtc);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Start/Stop and Suspend/Resume
|
|
*/
|
|
|
|
static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
/* Set display off and background to black */
|
|
rcar_du_crtc_write(rcrtc, DOOR, DOOR_RGB(0, 0, 0));
|
|
rcar_du_crtc_write(rcrtc, BPOR, BPOR_RGB(0, 0, 0));
|
|
|
|
/* Configure display timings and output routing */
|
|
rcar_du_crtc_set_display_timing(rcrtc);
|
|
rcar_du_group_set_routing(rcrtc->group);
|
|
|
|
/* Start with all planes disabled. */
|
|
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
|
|
|
|
/* Enable the VSP compositor. */
|
|
if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
|
|
rcar_du_vsp_enable(rcrtc);
|
|
|
|
/* Turn vertical blanking interrupt reporting on. */
|
|
drm_crtc_vblank_on(&rcrtc->crtc);
|
|
}
|
|
|
|
static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
bool interlaced;
|
|
|
|
/*
|
|
* Select master sync mode. This enables display operation in master
|
|
* sync mode (with the HSYNC and VSYNC signals configured as outputs and
|
|
* actively driven).
|
|
*/
|
|
interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
|
|
rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
|
|
(interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
|
|
DSYSR_TVM_MASTER);
|
|
|
|
rcar_du_group_start_stop(rcrtc->group, true);
|
|
}
|
|
|
|
static void rcar_du_crtc_disable_planes(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
struct drm_crtc *crtc = &rcrtc->crtc;
|
|
u32 status;
|
|
|
|
/* Make sure vblank interrupts are enabled. */
|
|
drm_crtc_vblank_get(crtc);
|
|
|
|
/*
|
|
* Disable planes and calculate how many vertical blanking interrupts we
|
|
* have to wait for. If a vertical blanking interrupt has been triggered
|
|
* but not processed yet, we don't know whether it occurred before or
|
|
* after the planes got disabled. We thus have to wait for two vblank
|
|
* interrupts in that case.
|
|
*/
|
|
spin_lock_irq(&rcrtc->vblank_lock);
|
|
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
|
|
status = rcar_du_crtc_read(rcrtc, DSSR);
|
|
rcrtc->vblank_count = status & DSSR_VBK ? 2 : 1;
|
|
spin_unlock_irq(&rcrtc->vblank_lock);
|
|
|
|
if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0,
|
|
msecs_to_jiffies(100)))
|
|
dev_warn(rcdu->dev, "vertical blanking timeout\n");
|
|
|
|
drm_crtc_vblank_put(crtc);
|
|
}
|
|
|
|
static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct drm_crtc *crtc = &rcrtc->crtc;
|
|
|
|
/*
|
|
* Disable all planes and wait for the change to take effect. This is
|
|
* required as the plane enable registers are updated on vblank, and no
|
|
* vblank will occur once the CRTC is stopped. Disabling planes when
|
|
* starting the CRTC thus wouldn't be enough as it would start scanning
|
|
* out immediately from old frame buffers until the next vblank.
|
|
*
|
|
* This increases the CRTC stop delay, especially when multiple CRTCs
|
|
* are stopped in one operation as we now wait for one vblank per CRTC.
|
|
* Whether this can be improved needs to be researched.
|
|
*/
|
|
rcar_du_crtc_disable_planes(rcrtc);
|
|
|
|
/*
|
|
* Disable vertical blanking interrupt reporting. We first need to wait
|
|
* for page flip completion before stopping the CRTC as userspace
|
|
* expects page flips to eventually complete.
|
|
*/
|
|
rcar_du_crtc_wait_page_flip(rcrtc);
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
/* Disable the VSP compositor. */
|
|
if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
|
|
rcar_du_vsp_disable(rcrtc);
|
|
|
|
/*
|
|
* Select switch sync mode. This stops display operation and configures
|
|
* the HSYNC and VSYNC signals as inputs.
|
|
*/
|
|
rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH);
|
|
|
|
rcar_du_group_start_stop(rcrtc->group, false);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* CRTC Functions
|
|
*/
|
|
|
|
static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_state)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
/*
|
|
* If the CRTC has already been setup by the .atomic_begin() handler we
|
|
* can skip the setup stage.
|
|
*/
|
|
if (!rcrtc->initialized) {
|
|
rcar_du_crtc_get(rcrtc);
|
|
rcar_du_crtc_setup(rcrtc);
|
|
rcrtc->initialized = true;
|
|
}
|
|
|
|
rcar_du_crtc_start(rcrtc);
|
|
}
|
|
|
|
static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_state)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
rcar_du_crtc_stop(rcrtc);
|
|
rcar_du_crtc_put(rcrtc);
|
|
|
|
spin_lock_irq(&crtc->dev->event_lock);
|
|
if (crtc->state->event) {
|
|
drm_crtc_send_vblank_event(crtc, crtc->state->event);
|
|
crtc->state->event = NULL;
|
|
}
|
|
spin_unlock_irq(&crtc->dev->event_lock);
|
|
|
|
rcrtc->initialized = false;
|
|
rcrtc->outputs = 0;
|
|
}
|
|
|
|
static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
WARN_ON(!crtc->state->enable);
|
|
|
|
/*
|
|
* If a mode set is in progress we can be called with the CRTC disabled.
|
|
* We then need to first setup the CRTC in order to configure planes.
|
|
* The .atomic_enable() handler will notice and skip the CRTC setup.
|
|
*/
|
|
if (!rcrtc->initialized) {
|
|
rcar_du_crtc_get(rcrtc);
|
|
rcar_du_crtc_setup(rcrtc);
|
|
rcrtc->initialized = true;
|
|
}
|
|
|
|
if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
|
|
rcar_du_vsp_atomic_begin(rcrtc);
|
|
}
|
|
|
|
static void rcar_du_crtc_atomic_flush(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
struct drm_device *dev = rcrtc->crtc.dev;
|
|
unsigned long flags;
|
|
|
|
rcar_du_crtc_update_planes(rcrtc);
|
|
|
|
if (crtc->state->event) {
|
|
WARN_ON(drm_crtc_vblank_get(crtc) != 0);
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
rcrtc->event = crtc->state->event;
|
|
crtc->state->event = NULL;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
|
|
rcar_du_vsp_atomic_flush(rcrtc);
|
|
}
|
|
|
|
enum drm_mode_status rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
|
|
|
|
if (interlaced && !rcar_du_has(rcdu, RCAR_DU_FEATURE_INTERLACED))
|
|
return MODE_NO_INTERLACE;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
|
|
.atomic_begin = rcar_du_crtc_atomic_begin,
|
|
.atomic_flush = rcar_du_crtc_atomic_flush,
|
|
.atomic_enable = rcar_du_crtc_atomic_enable,
|
|
.atomic_disable = rcar_du_crtc_atomic_disable,
|
|
.mode_valid = rcar_du_crtc_mode_valid,
|
|
};
|
|
|
|
static void rcar_du_crtc_crc_init(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
const char **sources;
|
|
unsigned int count;
|
|
int i = -1;
|
|
|
|
/* CRC available only on Gen3 HW. */
|
|
if (rcdu->info->gen < 3)
|
|
return;
|
|
|
|
/* Reserve 1 for "auto" source. */
|
|
count = rcrtc->vsp->num_planes + 1;
|
|
|
|
sources = kmalloc_array(count, sizeof(*sources), GFP_KERNEL);
|
|
if (!sources)
|
|
return;
|
|
|
|
sources[0] = kstrdup("auto", GFP_KERNEL);
|
|
if (!sources[0])
|
|
goto error;
|
|
|
|
for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
|
|
struct drm_plane *plane = &rcrtc->vsp->planes[i].plane;
|
|
char name[16];
|
|
|
|
sprintf(name, "plane%u", plane->base.id);
|
|
sources[i + 1] = kstrdup(name, GFP_KERNEL);
|
|
if (!sources[i + 1])
|
|
goto error;
|
|
}
|
|
|
|
rcrtc->sources = sources;
|
|
rcrtc->sources_count = count;
|
|
return;
|
|
|
|
error:
|
|
while (i >= 0) {
|
|
kfree(sources[i]);
|
|
i--;
|
|
}
|
|
kfree(sources);
|
|
}
|
|
|
|
static void rcar_du_crtc_crc_cleanup(struct rcar_du_crtc *rcrtc)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (!rcrtc->sources)
|
|
return;
|
|
|
|
for (i = 0; i < rcrtc->sources_count; i++)
|
|
kfree(rcrtc->sources[i]);
|
|
kfree(rcrtc->sources);
|
|
|
|
rcrtc->sources = NULL;
|
|
rcrtc->sources_count = 0;
|
|
}
|
|
|
|
static struct drm_crtc_state *
|
|
rcar_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
|
|
{
|
|
struct rcar_du_crtc_state *state;
|
|
struct rcar_du_crtc_state *copy;
|
|
|
|
if (WARN_ON(!crtc->state))
|
|
return NULL;
|
|
|
|
state = to_rcar_crtc_state(crtc->state);
|
|
copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
|
|
if (copy == NULL)
|
|
return NULL;
|
|
|
|
__drm_atomic_helper_crtc_duplicate_state(crtc, ©->state);
|
|
|
|
return ©->state;
|
|
}
|
|
|
|
static void rcar_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state)
|
|
{
|
|
__drm_atomic_helper_crtc_destroy_state(state);
|
|
kfree(to_rcar_crtc_state(state));
|
|
}
|
|
|
|
static void rcar_du_crtc_cleanup(struct drm_crtc *crtc)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
rcar_du_crtc_crc_cleanup(rcrtc);
|
|
|
|
return drm_crtc_cleanup(crtc);
|
|
}
|
|
|
|
static void rcar_du_crtc_reset(struct drm_crtc *crtc)
|
|
{
|
|
struct rcar_du_crtc_state *state;
|
|
|
|
if (crtc->state) {
|
|
rcar_du_crtc_atomic_destroy_state(crtc, crtc->state);
|
|
crtc->state = NULL;
|
|
}
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return;
|
|
|
|
state->crc.source = VSP1_DU_CRC_NONE;
|
|
state->crc.index = 0;
|
|
|
|
crtc->state = &state->state;
|
|
crtc->state->crtc = crtc;
|
|
}
|
|
|
|
static int rcar_du_crtc_enable_vblank(struct drm_crtc *crtc)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
rcar_du_crtc_write(rcrtc, DSRCR, DSRCR_VBCL);
|
|
rcar_du_crtc_set(rcrtc, DIER, DIER_VBE);
|
|
rcrtc->vblank_enable = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcar_du_crtc_disable_vblank(struct drm_crtc *crtc)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
rcar_du_crtc_clr(rcrtc, DIER, DIER_VBE);
|
|
rcrtc->vblank_enable = false;
|
|
}
|
|
|
|
static int rcar_du_crtc_parse_crc_source(struct rcar_du_crtc *rcrtc,
|
|
const char *source_name,
|
|
enum vsp1_du_crc_source *source)
|
|
{
|
|
unsigned int index;
|
|
int ret;
|
|
|
|
/*
|
|
* Parse the source name. Supported values are "plane%u" to compute the
|
|
* CRC on an input plane (%u is the plane ID), and "auto" to compute the
|
|
* CRC on the composer (VSP) output.
|
|
*/
|
|
|
|
if (!source_name) {
|
|
*source = VSP1_DU_CRC_NONE;
|
|
return 0;
|
|
} else if (!strcmp(source_name, "auto")) {
|
|
*source = VSP1_DU_CRC_OUTPUT;
|
|
return 0;
|
|
} else if (strstarts(source_name, "plane")) {
|
|
unsigned int i;
|
|
|
|
*source = VSP1_DU_CRC_PLANE;
|
|
|
|
ret = kstrtouint(source_name + strlen("plane"), 10, &index);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
|
|
if (index == rcrtc->vsp->planes[i].plane.base.id)
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int rcar_du_crtc_verify_crc_source(struct drm_crtc *crtc,
|
|
const char *source_name,
|
|
size_t *values_cnt)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
enum vsp1_du_crc_source source;
|
|
|
|
if (rcar_du_crtc_parse_crc_source(rcrtc, source_name, &source) < 0) {
|
|
DRM_DEBUG_DRIVER("unknown source %s\n", source_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*values_cnt = 1;
|
|
return 0;
|
|
}
|
|
|
|
const char *const *rcar_du_crtc_get_crc_sources(struct drm_crtc *crtc,
|
|
size_t *count)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
|
|
*count = rcrtc->sources_count;
|
|
return rcrtc->sources;
|
|
}
|
|
|
|
static int rcar_du_crtc_set_crc_source(struct drm_crtc *crtc,
|
|
const char *source_name)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
struct drm_modeset_acquire_ctx ctx;
|
|
struct drm_crtc_state *crtc_state;
|
|
struct drm_atomic_state *state;
|
|
enum vsp1_du_crc_source source;
|
|
unsigned int index;
|
|
int ret;
|
|
|
|
ret = rcar_du_crtc_parse_crc_source(rcrtc, source_name, &source);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
index = ret;
|
|
|
|
/* Perform an atomic commit to set the CRC source. */
|
|
drm_modeset_acquire_init(&ctx, 0);
|
|
|
|
state = drm_atomic_state_alloc(crtc->dev);
|
|
if (!state) {
|
|
ret = -ENOMEM;
|
|
goto unlock;
|
|
}
|
|
|
|
state->acquire_ctx = &ctx;
|
|
|
|
retry:
|
|
crtc_state = drm_atomic_get_crtc_state(state, crtc);
|
|
if (!IS_ERR(crtc_state)) {
|
|
struct rcar_du_crtc_state *rcrtc_state;
|
|
|
|
rcrtc_state = to_rcar_crtc_state(crtc_state);
|
|
rcrtc_state->crc.source = source;
|
|
rcrtc_state->crc.index = index;
|
|
|
|
ret = drm_atomic_commit(state);
|
|
} else {
|
|
ret = PTR_ERR(crtc_state);
|
|
}
|
|
|
|
if (ret == -EDEADLK) {
|
|
drm_atomic_state_clear(state);
|
|
drm_modeset_backoff(&ctx);
|
|
goto retry;
|
|
}
|
|
|
|
drm_atomic_state_put(state);
|
|
|
|
unlock:
|
|
drm_modeset_drop_locks(&ctx);
|
|
drm_modeset_acquire_fini(&ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_crtc_funcs crtc_funcs_gen2 = {
|
|
.reset = rcar_du_crtc_reset,
|
|
.destroy = drm_crtc_cleanup,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.atomic_duplicate_state = rcar_du_crtc_atomic_duplicate_state,
|
|
.atomic_destroy_state = rcar_du_crtc_atomic_destroy_state,
|
|
.enable_vblank = rcar_du_crtc_enable_vblank,
|
|
.disable_vblank = rcar_du_crtc_disable_vblank,
|
|
};
|
|
|
|
static const struct drm_crtc_funcs crtc_funcs_gen3 = {
|
|
.reset = rcar_du_crtc_reset,
|
|
.destroy = rcar_du_crtc_cleanup,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.atomic_duplicate_state = rcar_du_crtc_atomic_duplicate_state,
|
|
.atomic_destroy_state = rcar_du_crtc_atomic_destroy_state,
|
|
.enable_vblank = rcar_du_crtc_enable_vblank,
|
|
.disable_vblank = rcar_du_crtc_disable_vblank,
|
|
.set_crc_source = rcar_du_crtc_set_crc_source,
|
|
.verify_crc_source = rcar_du_crtc_verify_crc_source,
|
|
.get_crc_sources = rcar_du_crtc_get_crc_sources,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Interrupt Handling
|
|
*/
|
|
|
|
static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
|
|
{
|
|
struct rcar_du_crtc *rcrtc = arg;
|
|
struct rcar_du_device *rcdu = rcrtc->group->dev;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 status;
|
|
|
|
spin_lock(&rcrtc->vblank_lock);
|
|
|
|
status = rcar_du_crtc_read(rcrtc, DSSR);
|
|
rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
|
|
|
|
if (status & DSSR_VBK) {
|
|
/*
|
|
* Wake up the vblank wait if the counter reaches 0. This must
|
|
* be protected by the vblank_lock to avoid races in
|
|
* rcar_du_crtc_disable_planes().
|
|
*/
|
|
if (rcrtc->vblank_count) {
|
|
if (--rcrtc->vblank_count == 0)
|
|
wake_up(&rcrtc->vblank_wait);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&rcrtc->vblank_lock);
|
|
|
|
if (status & DSSR_VBK) {
|
|
if (rcdu->info->gen < 3) {
|
|
drm_crtc_handle_vblank(&rcrtc->crtc);
|
|
rcar_du_crtc_finish_page_flip(rcrtc);
|
|
}
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Initialization
|
|
*/
|
|
|
|
int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
|
|
unsigned int hwindex)
|
|
{
|
|
static const unsigned int mmio_offsets[] = {
|
|
DU0_REG_OFFSET, DU1_REG_OFFSET, DU2_REG_OFFSET, DU3_REG_OFFSET
|
|
};
|
|
|
|
struct rcar_du_device *rcdu = rgrp->dev;
|
|
struct platform_device *pdev = to_platform_device(rcdu->dev);
|
|
struct rcar_du_crtc *rcrtc = &rcdu->crtcs[swindex];
|
|
struct drm_crtc *crtc = &rcrtc->crtc;
|
|
struct drm_plane *primary;
|
|
unsigned int irqflags;
|
|
struct clk *clk;
|
|
char clk_name[9];
|
|
char *name;
|
|
int irq;
|
|
int ret;
|
|
|
|
/* Get the CRTC clock and the optional external clock. */
|
|
if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
|
|
sprintf(clk_name, "du.%u", hwindex);
|
|
name = clk_name;
|
|
} else {
|
|
name = NULL;
|
|
}
|
|
|
|
rcrtc->clock = devm_clk_get(rcdu->dev, name);
|
|
if (IS_ERR(rcrtc->clock)) {
|
|
dev_err(rcdu->dev, "no clock for DU channel %u\n", hwindex);
|
|
return PTR_ERR(rcrtc->clock);
|
|
}
|
|
|
|
sprintf(clk_name, "dclkin.%u", hwindex);
|
|
clk = devm_clk_get(rcdu->dev, clk_name);
|
|
if (!IS_ERR(clk)) {
|
|
rcrtc->extclock = clk;
|
|
} else if (PTR_ERR(rcrtc->clock) == -EPROBE_DEFER) {
|
|
dev_info(rcdu->dev, "can't get external clock %u\n", hwindex);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
init_waitqueue_head(&rcrtc->flip_wait);
|
|
init_waitqueue_head(&rcrtc->vblank_wait);
|
|
spin_lock_init(&rcrtc->vblank_lock);
|
|
|
|
rcrtc->group = rgrp;
|
|
rcrtc->mmio_offset = mmio_offsets[hwindex];
|
|
rcrtc->index = hwindex;
|
|
|
|
if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE))
|
|
primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
|
|
else
|
|
primary = &rgrp->planes[swindex % 2].plane;
|
|
|
|
ret = drm_crtc_init_with_planes(rcdu->ddev, crtc, primary, NULL,
|
|
rcdu->info->gen <= 2 ?
|
|
&crtc_funcs_gen2 : &crtc_funcs_gen3,
|
|
NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
drm_crtc_helper_add(crtc, &crtc_helper_funcs);
|
|
|
|
/* Start with vertical blanking interrupt reporting disabled. */
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
/* Register the interrupt handler. */
|
|
if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
|
|
/* The IRQ's are associated with the CRTC (sw)index. */
|
|
irq = platform_get_irq(pdev, swindex);
|
|
irqflags = 0;
|
|
} else {
|
|
irq = platform_get_irq(pdev, 0);
|
|
irqflags = IRQF_SHARED;
|
|
}
|
|
|
|
if (irq < 0) {
|
|
dev_err(rcdu->dev, "no IRQ for CRTC %u\n", swindex);
|
|
return irq;
|
|
}
|
|
|
|
ret = devm_request_irq(rcdu->dev, irq, rcar_du_crtc_irq, irqflags,
|
|
dev_name(rcdu->dev), rcrtc);
|
|
if (ret < 0) {
|
|
dev_err(rcdu->dev,
|
|
"failed to register IRQ for CRTC %u\n", swindex);
|
|
return ret;
|
|
}
|
|
|
|
rcar_du_crtc_crc_init(rcrtc);
|
|
|
|
return 0;
|
|
}
|