mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 06:50:58 +07:00
2c70010867
set_msi_sid_cb() is used to determine whether device aliases share the
same bus, but it can provide false indications that aliases use the same
bus when in fact they do not. The reason is that set_msi_sid_cb()
assumes that pdev is fixed, while actually pci_for_each_dma_alias() can
call fn() when pdev is set to a subordinate device.
As a result, running an VM on ESX with VT-d emulation enabled can
results in the log warning such as:
DMAR: [INTR-REMAP] Request device [00:11.0] fault index 3b [fault reason 38] Blocked an interrupt request due to source-id verification failure
This seems to cause additional ata errors such as:
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
These timeouts also cause boot to be much longer and other errors.
Fix it by checking comparing the alias with the previous one instead.
Fixes: 3f0c625c6a
("iommu/vt-d: Allow interrupts from the entire bus for aliased devices")
Cc: stable@vger.kernel.org
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
1519 lines
37 KiB
C
1519 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
#define pr_fmt(fmt) "DMAR-IR: " fmt
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dmar.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/hpet.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/intel-iommu.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/crash_dump.h>
|
|
#include <asm/io_apic.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/irq_remapping.h>
|
|
#include <asm/pci-direct.h>
|
|
#include <asm/msidef.h>
|
|
|
|
#include "irq_remapping.h"
|
|
|
|
enum irq_mode {
|
|
IRQ_REMAPPING,
|
|
IRQ_POSTING,
|
|
};
|
|
|
|
struct ioapic_scope {
|
|
struct intel_iommu *iommu;
|
|
unsigned int id;
|
|
unsigned int bus; /* PCI bus number */
|
|
unsigned int devfn; /* PCI devfn number */
|
|
};
|
|
|
|
struct hpet_scope {
|
|
struct intel_iommu *iommu;
|
|
u8 id;
|
|
unsigned int bus;
|
|
unsigned int devfn;
|
|
};
|
|
|
|
struct irq_2_iommu {
|
|
struct intel_iommu *iommu;
|
|
u16 irte_index;
|
|
u16 sub_handle;
|
|
u8 irte_mask;
|
|
enum irq_mode mode;
|
|
};
|
|
|
|
struct intel_ir_data {
|
|
struct irq_2_iommu irq_2_iommu;
|
|
struct irte irte_entry;
|
|
union {
|
|
struct msi_msg msi_entry;
|
|
};
|
|
};
|
|
|
|
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
|
|
#define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8)
|
|
|
|
static int __read_mostly eim_mode;
|
|
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
|
|
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
|
|
|
|
/*
|
|
* Lock ordering:
|
|
* ->dmar_global_lock
|
|
* ->irq_2_ir_lock
|
|
* ->qi->q_lock
|
|
* ->iommu->register_lock
|
|
* Note:
|
|
* intel_irq_remap_ops.{supported,prepare,enable,disable,reenable} are called
|
|
* in single-threaded environment with interrupt disabled, so no need to tabke
|
|
* the dmar_global_lock.
|
|
*/
|
|
DEFINE_RAW_SPINLOCK(irq_2_ir_lock);
|
|
static const struct irq_domain_ops intel_ir_domain_ops;
|
|
|
|
static void iommu_disable_irq_remapping(struct intel_iommu *iommu);
|
|
static int __init parse_ioapics_under_ir(void);
|
|
|
|
static bool ir_pre_enabled(struct intel_iommu *iommu)
|
|
{
|
|
return (iommu->flags & VTD_FLAG_IRQ_REMAP_PRE_ENABLED);
|
|
}
|
|
|
|
static void clear_ir_pre_enabled(struct intel_iommu *iommu)
|
|
{
|
|
iommu->flags &= ~VTD_FLAG_IRQ_REMAP_PRE_ENABLED;
|
|
}
|
|
|
|
static void init_ir_status(struct intel_iommu *iommu)
|
|
{
|
|
u32 gsts;
|
|
|
|
gsts = readl(iommu->reg + DMAR_GSTS_REG);
|
|
if (gsts & DMA_GSTS_IRES)
|
|
iommu->flags |= VTD_FLAG_IRQ_REMAP_PRE_ENABLED;
|
|
}
|
|
|
|
static int alloc_irte(struct intel_iommu *iommu,
|
|
struct irq_2_iommu *irq_iommu, u16 count)
|
|
{
|
|
struct ir_table *table = iommu->ir_table;
|
|
unsigned int mask = 0;
|
|
unsigned long flags;
|
|
int index;
|
|
|
|
if (!count || !irq_iommu)
|
|
return -1;
|
|
|
|
if (count > 1) {
|
|
count = __roundup_pow_of_two(count);
|
|
mask = ilog2(count);
|
|
}
|
|
|
|
if (mask > ecap_max_handle_mask(iommu->ecap)) {
|
|
pr_err("Requested mask %x exceeds the max invalidation handle"
|
|
" mask value %Lx\n", mask,
|
|
ecap_max_handle_mask(iommu->ecap));
|
|
return -1;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
|
|
index = bitmap_find_free_region(table->bitmap,
|
|
INTR_REMAP_TABLE_ENTRIES, mask);
|
|
if (index < 0) {
|
|
pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id);
|
|
} else {
|
|
irq_iommu->iommu = iommu;
|
|
irq_iommu->irte_index = index;
|
|
irq_iommu->sub_handle = 0;
|
|
irq_iommu->irte_mask = mask;
|
|
irq_iommu->mode = IRQ_REMAPPING;
|
|
}
|
|
raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
|
|
|
|
return index;
|
|
}
|
|
|
|
static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
|
|
{
|
|
struct qi_desc desc;
|
|
|
|
desc.qw0 = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask)
|
|
| QI_IEC_SELECTIVE;
|
|
desc.qw1 = 0;
|
|
desc.qw2 = 0;
|
|
desc.qw3 = 0;
|
|
|
|
return qi_submit_sync(&desc, iommu);
|
|
}
|
|
|
|
static int modify_irte(struct irq_2_iommu *irq_iommu,
|
|
struct irte *irte_modified)
|
|
{
|
|
struct intel_iommu *iommu;
|
|
unsigned long flags;
|
|
struct irte *irte;
|
|
int rc, index;
|
|
|
|
if (!irq_iommu)
|
|
return -1;
|
|
|
|
raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
|
|
|
|
iommu = irq_iommu->iommu;
|
|
|
|
index = irq_iommu->irte_index + irq_iommu->sub_handle;
|
|
irte = &iommu->ir_table->base[index];
|
|
|
|
#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE)
|
|
if ((irte->pst == 1) || (irte_modified->pst == 1)) {
|
|
bool ret;
|
|
|
|
ret = cmpxchg_double(&irte->low, &irte->high,
|
|
irte->low, irte->high,
|
|
irte_modified->low, irte_modified->high);
|
|
/*
|
|
* We use cmpxchg16 to atomically update the 128-bit IRTE,
|
|
* and it cannot be updated by the hardware or other processors
|
|
* behind us, so the return value of cmpxchg16 should be the
|
|
* same as the old value.
|
|
*/
|
|
WARN_ON(!ret);
|
|
} else
|
|
#endif
|
|
{
|
|
set_64bit(&irte->low, irte_modified->low);
|
|
set_64bit(&irte->high, irte_modified->high);
|
|
}
|
|
__iommu_flush_cache(iommu, irte, sizeof(*irte));
|
|
|
|
rc = qi_flush_iec(iommu, index, 0);
|
|
|
|
/* Update iommu mode according to the IRTE mode */
|
|
irq_iommu->mode = irte->pst ? IRQ_POSTING : IRQ_REMAPPING;
|
|
raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct intel_iommu *map_hpet_to_ir(u8 hpet_id)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_HPET_TBS; i++)
|
|
if (ir_hpet[i].id == hpet_id && ir_hpet[i].iommu)
|
|
return ir_hpet[i].iommu;
|
|
return NULL;
|
|
}
|
|
|
|
static struct intel_iommu *map_ioapic_to_ir(int apic)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_IO_APICS; i++)
|
|
if (ir_ioapic[i].id == apic && ir_ioapic[i].iommu)
|
|
return ir_ioapic[i].iommu;
|
|
return NULL;
|
|
}
|
|
|
|
static struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
|
|
drhd = dmar_find_matched_drhd_unit(dev);
|
|
if (!drhd)
|
|
return NULL;
|
|
|
|
return drhd->iommu;
|
|
}
|
|
|
|
static int clear_entries(struct irq_2_iommu *irq_iommu)
|
|
{
|
|
struct irte *start, *entry, *end;
|
|
struct intel_iommu *iommu;
|
|
int index;
|
|
|
|
if (irq_iommu->sub_handle)
|
|
return 0;
|
|
|
|
iommu = irq_iommu->iommu;
|
|
index = irq_iommu->irte_index;
|
|
|
|
start = iommu->ir_table->base + index;
|
|
end = start + (1 << irq_iommu->irte_mask);
|
|
|
|
for (entry = start; entry < end; entry++) {
|
|
set_64bit(&entry->low, 0);
|
|
set_64bit(&entry->high, 0);
|
|
}
|
|
bitmap_release_region(iommu->ir_table->bitmap, index,
|
|
irq_iommu->irte_mask);
|
|
|
|
return qi_flush_iec(iommu, index, irq_iommu->irte_mask);
|
|
}
|
|
|
|
/*
|
|
* source validation type
|
|
*/
|
|
#define SVT_NO_VERIFY 0x0 /* no verification is required */
|
|
#define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fields */
|
|
#define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */
|
|
|
|
/*
|
|
* source-id qualifier
|
|
*/
|
|
#define SQ_ALL_16 0x0 /* verify all 16 bits of request-id */
|
|
#define SQ_13_IGNORE_1 0x1 /* verify most significant 13 bits, ignore
|
|
* the third least significant bit
|
|
*/
|
|
#define SQ_13_IGNORE_2 0x2 /* verify most significant 13 bits, ignore
|
|
* the second and third least significant bits
|
|
*/
|
|
#define SQ_13_IGNORE_3 0x3 /* verify most significant 13 bits, ignore
|
|
* the least three significant bits
|
|
*/
|
|
|
|
/*
|
|
* set SVT, SQ and SID fields of irte to verify
|
|
* source ids of interrupt requests
|
|
*/
|
|
static void set_irte_sid(struct irte *irte, unsigned int svt,
|
|
unsigned int sq, unsigned int sid)
|
|
{
|
|
if (disable_sourceid_checking)
|
|
svt = SVT_NO_VERIFY;
|
|
irte->svt = svt;
|
|
irte->sq = sq;
|
|
irte->sid = sid;
|
|
}
|
|
|
|
/*
|
|
* Set an IRTE to match only the bus number. Interrupt requests that reference
|
|
* this IRTE must have a requester-id whose bus number is between or equal
|
|
* to the start_bus and end_bus arguments.
|
|
*/
|
|
static void set_irte_verify_bus(struct irte *irte, unsigned int start_bus,
|
|
unsigned int end_bus)
|
|
{
|
|
set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
|
|
(start_bus << 8) | end_bus);
|
|
}
|
|
|
|
static int set_ioapic_sid(struct irte *irte, int apic)
|
|
{
|
|
int i;
|
|
u16 sid = 0;
|
|
|
|
if (!irte)
|
|
return -1;
|
|
|
|
down_read(&dmar_global_lock);
|
|
for (i = 0; i < MAX_IO_APICS; i++) {
|
|
if (ir_ioapic[i].iommu && ir_ioapic[i].id == apic) {
|
|
sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
|
|
break;
|
|
}
|
|
}
|
|
up_read(&dmar_global_lock);
|
|
|
|
if (sid == 0) {
|
|
pr_warn("Failed to set source-id of IOAPIC (%d)\n", apic);
|
|
return -1;
|
|
}
|
|
|
|
set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, sid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_hpet_sid(struct irte *irte, u8 id)
|
|
{
|
|
int i;
|
|
u16 sid = 0;
|
|
|
|
if (!irte)
|
|
return -1;
|
|
|
|
down_read(&dmar_global_lock);
|
|
for (i = 0; i < MAX_HPET_TBS; i++) {
|
|
if (ir_hpet[i].iommu && ir_hpet[i].id == id) {
|
|
sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn;
|
|
break;
|
|
}
|
|
}
|
|
up_read(&dmar_global_lock);
|
|
|
|
if (sid == 0) {
|
|
pr_warn("Failed to set source-id of HPET block (%d)\n", id);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Should really use SQ_ALL_16. Some platforms are broken.
|
|
* While we figure out the right quirks for these broken platforms, use
|
|
* SQ_13_IGNORE_3 for now.
|
|
*/
|
|
set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_13_IGNORE_3, sid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct set_msi_sid_data {
|
|
struct pci_dev *pdev;
|
|
u16 alias;
|
|
int count;
|
|
int busmatch_count;
|
|
};
|
|
|
|
static int set_msi_sid_cb(struct pci_dev *pdev, u16 alias, void *opaque)
|
|
{
|
|
struct set_msi_sid_data *data = opaque;
|
|
|
|
if (data->count == 0 || PCI_BUS_NUM(alias) == PCI_BUS_NUM(data->alias))
|
|
data->busmatch_count++;
|
|
|
|
data->pdev = pdev;
|
|
data->alias = alias;
|
|
data->count++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_msi_sid(struct irte *irte, struct pci_dev *dev)
|
|
{
|
|
struct set_msi_sid_data data;
|
|
|
|
if (!irte || !dev)
|
|
return -1;
|
|
|
|
data.count = 0;
|
|
data.busmatch_count = 0;
|
|
pci_for_each_dma_alias(dev, set_msi_sid_cb, &data);
|
|
|
|
/*
|
|
* DMA alias provides us with a PCI device and alias. The only case
|
|
* where the it will return an alias on a different bus than the
|
|
* device is the case of a PCIe-to-PCI bridge, where the alias is for
|
|
* the subordinate bus. In this case we can only verify the bus.
|
|
*
|
|
* If there are multiple aliases, all with the same bus number,
|
|
* then all we can do is verify the bus. This is typical in NTB
|
|
* hardware which use proxy IDs where the device will generate traffic
|
|
* from multiple devfn numbers on the same bus.
|
|
*
|
|
* If the alias device is on a different bus than our source device
|
|
* then we have a topology based alias, use it.
|
|
*
|
|
* Otherwise, the alias is for a device DMA quirk and we cannot
|
|
* assume that MSI uses the same requester ID. Therefore use the
|
|
* original device.
|
|
*/
|
|
if (PCI_BUS_NUM(data.alias) != data.pdev->bus->number)
|
|
set_irte_verify_bus(irte, PCI_BUS_NUM(data.alias),
|
|
dev->bus->number);
|
|
else if (data.count >= 2 && data.busmatch_count == data.count)
|
|
set_irte_verify_bus(irte, dev->bus->number, dev->bus->number);
|
|
else if (data.pdev->bus->number != dev->bus->number)
|
|
set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias);
|
|
else
|
|
set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16,
|
|
pci_dev_id(dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iommu_load_old_irte(struct intel_iommu *iommu)
|
|
{
|
|
struct irte *old_ir_table;
|
|
phys_addr_t irt_phys;
|
|
unsigned int i;
|
|
size_t size;
|
|
u64 irta;
|
|
|
|
/* Check whether the old ir-table has the same size as ours */
|
|
irta = dmar_readq(iommu->reg + DMAR_IRTA_REG);
|
|
if ((irta & INTR_REMAP_TABLE_REG_SIZE_MASK)
|
|
!= INTR_REMAP_TABLE_REG_SIZE)
|
|
return -EINVAL;
|
|
|
|
irt_phys = irta & VTD_PAGE_MASK;
|
|
size = INTR_REMAP_TABLE_ENTRIES*sizeof(struct irte);
|
|
|
|
/* Map the old IR table */
|
|
old_ir_table = memremap(irt_phys, size, MEMREMAP_WB);
|
|
if (!old_ir_table)
|
|
return -ENOMEM;
|
|
|
|
/* Copy data over */
|
|
memcpy(iommu->ir_table->base, old_ir_table, size);
|
|
|
|
__iommu_flush_cache(iommu, iommu->ir_table->base, size);
|
|
|
|
/*
|
|
* Now check the table for used entries and mark those as
|
|
* allocated in the bitmap
|
|
*/
|
|
for (i = 0; i < INTR_REMAP_TABLE_ENTRIES; i++) {
|
|
if (iommu->ir_table->base[i].present)
|
|
bitmap_set(iommu->ir_table->bitmap, i, 1);
|
|
}
|
|
|
|
memunmap(old_ir_table);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode)
|
|
{
|
|
unsigned long flags;
|
|
u64 addr;
|
|
u32 sts;
|
|
|
|
addr = virt_to_phys((void *)iommu->ir_table->base);
|
|
|
|
raw_spin_lock_irqsave(&iommu->register_lock, flags);
|
|
|
|
dmar_writeq(iommu->reg + DMAR_IRTA_REG,
|
|
(addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE);
|
|
|
|
/* Set interrupt-remapping table pointer */
|
|
writel(iommu->gcmd | DMA_GCMD_SIRTP, iommu->reg + DMAR_GCMD_REG);
|
|
|
|
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
|
|
readl, (sts & DMA_GSTS_IRTPS), sts);
|
|
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
|
|
|
|
/*
|
|
* Global invalidation of interrupt entry cache to make sure the
|
|
* hardware uses the new irq remapping table.
|
|
*/
|
|
qi_global_iec(iommu);
|
|
}
|
|
|
|
static void iommu_enable_irq_remapping(struct intel_iommu *iommu)
|
|
{
|
|
unsigned long flags;
|
|
u32 sts;
|
|
|
|
raw_spin_lock_irqsave(&iommu->register_lock, flags);
|
|
|
|
/* Enable interrupt-remapping */
|
|
iommu->gcmd |= DMA_GCMD_IRE;
|
|
iommu->gcmd &= ~DMA_GCMD_CFI; /* Block compatibility-format MSIs */
|
|
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
|
|
|
|
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
|
|
readl, (sts & DMA_GSTS_IRES), sts);
|
|
|
|
/*
|
|
* With CFI clear in the Global Command register, we should be
|
|
* protected from dangerous (i.e. compatibility) interrupts
|
|
* regardless of x2apic status. Check just to be sure.
|
|
*/
|
|
if (sts & DMA_GSTS_CFIS)
|
|
WARN(1, KERN_WARNING
|
|
"Compatibility-format IRQs enabled despite intr remapping;\n"
|
|
"you are vulnerable to IRQ injection.\n");
|
|
|
|
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
|
|
}
|
|
|
|
static int intel_setup_irq_remapping(struct intel_iommu *iommu)
|
|
{
|
|
struct ir_table *ir_table;
|
|
struct fwnode_handle *fn;
|
|
unsigned long *bitmap;
|
|
struct page *pages;
|
|
|
|
if (iommu->ir_table)
|
|
return 0;
|
|
|
|
ir_table = kzalloc(sizeof(struct ir_table), GFP_KERNEL);
|
|
if (!ir_table)
|
|
return -ENOMEM;
|
|
|
|
pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO,
|
|
INTR_REMAP_PAGE_ORDER);
|
|
if (!pages) {
|
|
pr_err("IR%d: failed to allocate pages of order %d\n",
|
|
iommu->seq_id, INTR_REMAP_PAGE_ORDER);
|
|
goto out_free_table;
|
|
}
|
|
|
|
bitmap = bitmap_zalloc(INTR_REMAP_TABLE_ENTRIES, GFP_ATOMIC);
|
|
if (bitmap == NULL) {
|
|
pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id);
|
|
goto out_free_pages;
|
|
}
|
|
|
|
fn = irq_domain_alloc_named_id_fwnode("INTEL-IR", iommu->seq_id);
|
|
if (!fn)
|
|
goto out_free_bitmap;
|
|
|
|
iommu->ir_domain =
|
|
irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
|
|
0, INTR_REMAP_TABLE_ENTRIES,
|
|
fn, &intel_ir_domain_ops,
|
|
iommu);
|
|
irq_domain_free_fwnode(fn);
|
|
if (!iommu->ir_domain) {
|
|
pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
|
|
goto out_free_bitmap;
|
|
}
|
|
iommu->ir_msi_domain =
|
|
arch_create_remap_msi_irq_domain(iommu->ir_domain,
|
|
"INTEL-IR-MSI",
|
|
iommu->seq_id);
|
|
|
|
ir_table->base = page_address(pages);
|
|
ir_table->bitmap = bitmap;
|
|
iommu->ir_table = ir_table;
|
|
|
|
/*
|
|
* If the queued invalidation is already initialized,
|
|
* shouldn't disable it.
|
|
*/
|
|
if (!iommu->qi) {
|
|
/*
|
|
* Clear previous faults.
|
|
*/
|
|
dmar_fault(-1, iommu);
|
|
dmar_disable_qi(iommu);
|
|
|
|
if (dmar_enable_qi(iommu)) {
|
|
pr_err("Failed to enable queued invalidation\n");
|
|
goto out_free_bitmap;
|
|
}
|
|
}
|
|
|
|
init_ir_status(iommu);
|
|
|
|
if (ir_pre_enabled(iommu)) {
|
|
if (!is_kdump_kernel()) {
|
|
pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n",
|
|
iommu->name);
|
|
clear_ir_pre_enabled(iommu);
|
|
iommu_disable_irq_remapping(iommu);
|
|
} else if (iommu_load_old_irte(iommu))
|
|
pr_err("Failed to copy IR table for %s from previous kernel\n",
|
|
iommu->name);
|
|
else
|
|
pr_info("Copied IR table for %s from previous kernel\n",
|
|
iommu->name);
|
|
}
|
|
|
|
iommu_set_irq_remapping(iommu, eim_mode);
|
|
|
|
return 0;
|
|
|
|
out_free_bitmap:
|
|
bitmap_free(bitmap);
|
|
out_free_pages:
|
|
__free_pages(pages, INTR_REMAP_PAGE_ORDER);
|
|
out_free_table:
|
|
kfree(ir_table);
|
|
|
|
iommu->ir_table = NULL;
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
|
|
{
|
|
if (iommu && iommu->ir_table) {
|
|
if (iommu->ir_msi_domain) {
|
|
irq_domain_remove(iommu->ir_msi_domain);
|
|
iommu->ir_msi_domain = NULL;
|
|
}
|
|
if (iommu->ir_domain) {
|
|
irq_domain_remove(iommu->ir_domain);
|
|
iommu->ir_domain = NULL;
|
|
}
|
|
free_pages((unsigned long)iommu->ir_table->base,
|
|
INTR_REMAP_PAGE_ORDER);
|
|
bitmap_free(iommu->ir_table->bitmap);
|
|
kfree(iommu->ir_table);
|
|
iommu->ir_table = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable Interrupt Remapping.
|
|
*/
|
|
static void iommu_disable_irq_remapping(struct intel_iommu *iommu)
|
|
{
|
|
unsigned long flags;
|
|
u32 sts;
|
|
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
return;
|
|
|
|
/*
|
|
* global invalidation of interrupt entry cache before disabling
|
|
* interrupt-remapping.
|
|
*/
|
|
qi_global_iec(iommu);
|
|
|
|
raw_spin_lock_irqsave(&iommu->register_lock, flags);
|
|
|
|
sts = readl(iommu->reg + DMAR_GSTS_REG);
|
|
if (!(sts & DMA_GSTS_IRES))
|
|
goto end;
|
|
|
|
iommu->gcmd &= ~DMA_GCMD_IRE;
|
|
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
|
|
|
|
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
|
|
readl, !(sts & DMA_GSTS_IRES), sts);
|
|
|
|
end:
|
|
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
|
|
}
|
|
|
|
static int __init dmar_x2apic_optout(void)
|
|
{
|
|
struct acpi_table_dmar *dmar;
|
|
dmar = (struct acpi_table_dmar *)dmar_tbl;
|
|
if (!dmar || no_x2apic_optout)
|
|
return 0;
|
|
return dmar->flags & DMAR_X2APIC_OPT_OUT;
|
|
}
|
|
|
|
static void __init intel_cleanup_irq_remapping(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu;
|
|
|
|
for_each_iommu(iommu, drhd) {
|
|
if (ecap_ir_support(iommu->ecap)) {
|
|
iommu_disable_irq_remapping(iommu);
|
|
intel_teardown_irq_remapping(iommu);
|
|
}
|
|
}
|
|
|
|
if (x2apic_supported())
|
|
pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n");
|
|
}
|
|
|
|
static int __init intel_prepare_irq_remapping(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu;
|
|
int eim = 0;
|
|
|
|
if (irq_remap_broken) {
|
|
pr_warn("This system BIOS has enabled interrupt remapping\n"
|
|
"on a chipset that contains an erratum making that\n"
|
|
"feature unstable. To maintain system stability\n"
|
|
"interrupt remapping is being disabled. Please\n"
|
|
"contact your BIOS vendor for an update\n");
|
|
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dmar_table_init() < 0)
|
|
return -ENODEV;
|
|
|
|
if (!dmar_ir_support())
|
|
return -ENODEV;
|
|
|
|
if (parse_ioapics_under_ir()) {
|
|
pr_info("Not enabling interrupt remapping\n");
|
|
goto error;
|
|
}
|
|
|
|
/* First make sure all IOMMUs support IRQ remapping */
|
|
for_each_iommu(iommu, drhd)
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
goto error;
|
|
|
|
/* Detect remapping mode: lapic or x2apic */
|
|
if (x2apic_supported()) {
|
|
eim = !dmar_x2apic_optout();
|
|
if (!eim) {
|
|
pr_info("x2apic is disabled because BIOS sets x2apic opt out bit.");
|
|
pr_info("Use 'intremap=no_x2apic_optout' to override the BIOS setting.\n");
|
|
}
|
|
}
|
|
|
|
for_each_iommu(iommu, drhd) {
|
|
if (eim && !ecap_eim_support(iommu->ecap)) {
|
|
pr_info("%s does not support EIM\n", iommu->name);
|
|
eim = 0;
|
|
}
|
|
}
|
|
|
|
eim_mode = eim;
|
|
if (eim)
|
|
pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
|
|
|
|
/* Do the initializations early */
|
|
for_each_iommu(iommu, drhd) {
|
|
if (intel_setup_irq_remapping(iommu)) {
|
|
pr_err("Failed to setup irq remapping for %s\n",
|
|
iommu->name);
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
intel_cleanup_irq_remapping();
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Set Posted-Interrupts capability.
|
|
*/
|
|
static inline void set_irq_posting_cap(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu;
|
|
|
|
if (!disable_irq_post) {
|
|
/*
|
|
* If IRTE is in posted format, the 'pda' field goes across the
|
|
* 64-bit boundary, we need use cmpxchg16b to atomically update
|
|
* it. We only expose posted-interrupt when X86_FEATURE_CX16
|
|
* is supported. Actually, hardware platforms supporting PI
|
|
* should have X86_FEATURE_CX16 support, this has been confirmed
|
|
* with Intel hardware guys.
|
|
*/
|
|
if (boot_cpu_has(X86_FEATURE_CX16))
|
|
intel_irq_remap_ops.capability |= 1 << IRQ_POSTING_CAP;
|
|
|
|
for_each_iommu(iommu, drhd)
|
|
if (!cap_pi_support(iommu->cap)) {
|
|
intel_irq_remap_ops.capability &=
|
|
~(1 << IRQ_POSTING_CAP);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init intel_enable_irq_remapping(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu;
|
|
bool setup = false;
|
|
|
|
/*
|
|
* Setup Interrupt-remapping for all the DRHD's now.
|
|
*/
|
|
for_each_iommu(iommu, drhd) {
|
|
if (!ir_pre_enabled(iommu))
|
|
iommu_enable_irq_remapping(iommu);
|
|
setup = true;
|
|
}
|
|
|
|
if (!setup)
|
|
goto error;
|
|
|
|
irq_remapping_enabled = 1;
|
|
|
|
set_irq_posting_cap();
|
|
|
|
pr_info("Enabled IRQ remapping in %s mode\n", eim_mode ? "x2apic" : "xapic");
|
|
|
|
return eim_mode ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE;
|
|
|
|
error:
|
|
intel_cleanup_irq_remapping();
|
|
return -1;
|
|
}
|
|
|
|
static int ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
|
|
struct intel_iommu *iommu,
|
|
struct acpi_dmar_hardware_unit *drhd)
|
|
{
|
|
struct acpi_dmar_pci_path *path;
|
|
u8 bus;
|
|
int count, free = -1;
|
|
|
|
bus = scope->bus;
|
|
path = (struct acpi_dmar_pci_path *)(scope + 1);
|
|
count = (scope->length - sizeof(struct acpi_dmar_device_scope))
|
|
/ sizeof(struct acpi_dmar_pci_path);
|
|
|
|
while (--count > 0) {
|
|
/*
|
|
* Access PCI directly due to the PCI
|
|
* subsystem isn't initialized yet.
|
|
*/
|
|
bus = read_pci_config_byte(bus, path->device, path->function,
|
|
PCI_SECONDARY_BUS);
|
|
path++;
|
|
}
|
|
|
|
for (count = 0; count < MAX_HPET_TBS; count++) {
|
|
if (ir_hpet[count].iommu == iommu &&
|
|
ir_hpet[count].id == scope->enumeration_id)
|
|
return 0;
|
|
else if (ir_hpet[count].iommu == NULL && free == -1)
|
|
free = count;
|
|
}
|
|
if (free == -1) {
|
|
pr_warn("Exceeded Max HPET blocks\n");
|
|
return -ENOSPC;
|
|
}
|
|
|
|
ir_hpet[free].iommu = iommu;
|
|
ir_hpet[free].id = scope->enumeration_id;
|
|
ir_hpet[free].bus = bus;
|
|
ir_hpet[free].devfn = PCI_DEVFN(path->device, path->function);
|
|
pr_info("HPET id %d under DRHD base 0x%Lx\n",
|
|
scope->enumeration_id, drhd->address);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
|
|
struct intel_iommu *iommu,
|
|
struct acpi_dmar_hardware_unit *drhd)
|
|
{
|
|
struct acpi_dmar_pci_path *path;
|
|
u8 bus;
|
|
int count, free = -1;
|
|
|
|
bus = scope->bus;
|
|
path = (struct acpi_dmar_pci_path *)(scope + 1);
|
|
count = (scope->length - sizeof(struct acpi_dmar_device_scope))
|
|
/ sizeof(struct acpi_dmar_pci_path);
|
|
|
|
while (--count > 0) {
|
|
/*
|
|
* Access PCI directly due to the PCI
|
|
* subsystem isn't initialized yet.
|
|
*/
|
|
bus = read_pci_config_byte(bus, path->device, path->function,
|
|
PCI_SECONDARY_BUS);
|
|
path++;
|
|
}
|
|
|
|
for (count = 0; count < MAX_IO_APICS; count++) {
|
|
if (ir_ioapic[count].iommu == iommu &&
|
|
ir_ioapic[count].id == scope->enumeration_id)
|
|
return 0;
|
|
else if (ir_ioapic[count].iommu == NULL && free == -1)
|
|
free = count;
|
|
}
|
|
if (free == -1) {
|
|
pr_warn("Exceeded Max IO APICS\n");
|
|
return -ENOSPC;
|
|
}
|
|
|
|
ir_ioapic[free].bus = bus;
|
|
ir_ioapic[free].devfn = PCI_DEVFN(path->device, path->function);
|
|
ir_ioapic[free].iommu = iommu;
|
|
ir_ioapic[free].id = scope->enumeration_id;
|
|
pr_info("IOAPIC id %d under DRHD base 0x%Lx IOMMU %d\n",
|
|
scope->enumeration_id, drhd->address, iommu->seq_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
|
|
struct intel_iommu *iommu)
|
|
{
|
|
int ret = 0;
|
|
struct acpi_dmar_hardware_unit *drhd;
|
|
struct acpi_dmar_device_scope *scope;
|
|
void *start, *end;
|
|
|
|
drhd = (struct acpi_dmar_hardware_unit *)header;
|
|
start = (void *)(drhd + 1);
|
|
end = ((void *)drhd) + header->length;
|
|
|
|
while (start < end && ret == 0) {
|
|
scope = start;
|
|
if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC)
|
|
ret = ir_parse_one_ioapic_scope(scope, iommu, drhd);
|
|
else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET)
|
|
ret = ir_parse_one_hpet_scope(scope, iommu, drhd);
|
|
start += scope->length;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ir_remove_ioapic_hpet_scope(struct intel_iommu *iommu)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_HPET_TBS; i++)
|
|
if (ir_hpet[i].iommu == iommu)
|
|
ir_hpet[i].iommu = NULL;
|
|
|
|
for (i = 0; i < MAX_IO_APICS; i++)
|
|
if (ir_ioapic[i].iommu == iommu)
|
|
ir_ioapic[i].iommu = NULL;
|
|
}
|
|
|
|
/*
|
|
* Finds the assocaition between IOAPIC's and its Interrupt-remapping
|
|
* hardware unit.
|
|
*/
|
|
static int __init parse_ioapics_under_ir(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu;
|
|
bool ir_supported = false;
|
|
int ioapic_idx;
|
|
|
|
for_each_iommu(iommu, drhd) {
|
|
int ret;
|
|
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
continue;
|
|
|
|
ret = ir_parse_ioapic_hpet_scope(drhd->hdr, iommu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ir_supported = true;
|
|
}
|
|
|
|
if (!ir_supported)
|
|
return -ENODEV;
|
|
|
|
for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
|
|
int ioapic_id = mpc_ioapic_id(ioapic_idx);
|
|
if (!map_ioapic_to_ir(ioapic_id)) {
|
|
pr_err(FW_BUG "ioapic %d has no mapping iommu, "
|
|
"interrupt remapping will be disabled\n",
|
|
ioapic_id);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init ir_dev_scope_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!irq_remapping_enabled)
|
|
return 0;
|
|
|
|
down_write(&dmar_global_lock);
|
|
ret = dmar_dev_scope_init();
|
|
up_write(&dmar_global_lock);
|
|
|
|
return ret;
|
|
}
|
|
rootfs_initcall(ir_dev_scope_init);
|
|
|
|
static void disable_irq_remapping(void)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
struct intel_iommu *iommu = NULL;
|
|
|
|
/*
|
|
* Disable Interrupt-remapping for all the DRHD's now.
|
|
*/
|
|
for_each_iommu(iommu, drhd) {
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
continue;
|
|
|
|
iommu_disable_irq_remapping(iommu);
|
|
}
|
|
|
|
/*
|
|
* Clear Posted-Interrupts capability.
|
|
*/
|
|
if (!disable_irq_post)
|
|
intel_irq_remap_ops.capability &= ~(1 << IRQ_POSTING_CAP);
|
|
}
|
|
|
|
static int reenable_irq_remapping(int eim)
|
|
{
|
|
struct dmar_drhd_unit *drhd;
|
|
bool setup = false;
|
|
struct intel_iommu *iommu = NULL;
|
|
|
|
for_each_iommu(iommu, drhd)
|
|
if (iommu->qi)
|
|
dmar_reenable_qi(iommu);
|
|
|
|
/*
|
|
* Setup Interrupt-remapping for all the DRHD's now.
|
|
*/
|
|
for_each_iommu(iommu, drhd) {
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
continue;
|
|
|
|
/* Set up interrupt remapping for iommu.*/
|
|
iommu_set_irq_remapping(iommu, eim);
|
|
iommu_enable_irq_remapping(iommu);
|
|
setup = true;
|
|
}
|
|
|
|
if (!setup)
|
|
goto error;
|
|
|
|
set_irq_posting_cap();
|
|
|
|
return 0;
|
|
|
|
error:
|
|
/*
|
|
* handle error condition gracefully here!
|
|
*/
|
|
return -1;
|
|
}
|
|
|
|
static void prepare_irte(struct irte *irte, int vector, unsigned int dest)
|
|
{
|
|
memset(irte, 0, sizeof(*irte));
|
|
|
|
irte->present = 1;
|
|
irte->dst_mode = apic->irq_dest_mode;
|
|
/*
|
|
* Trigger mode in the IRTE will always be edge, and for IO-APIC, the
|
|
* actual level or edge trigger will be setup in the IO-APIC
|
|
* RTE. This will help simplify level triggered irq migration.
|
|
* For more details, see the comments (in io_apic.c) explainig IO-APIC
|
|
* irq migration in the presence of interrupt-remapping.
|
|
*/
|
|
irte->trigger_mode = 0;
|
|
irte->dlvry_mode = apic->irq_delivery_mode;
|
|
irte->vector = vector;
|
|
irte->dest_id = IRTE_DEST(dest);
|
|
irte->redir_hint = 1;
|
|
}
|
|
|
|
static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
|
|
{
|
|
struct intel_iommu *iommu = NULL;
|
|
|
|
if (!info)
|
|
return NULL;
|
|
|
|
switch (info->type) {
|
|
case X86_IRQ_ALLOC_TYPE_IOAPIC:
|
|
iommu = map_ioapic_to_ir(info->ioapic_id);
|
|
break;
|
|
case X86_IRQ_ALLOC_TYPE_HPET:
|
|
iommu = map_hpet_to_ir(info->hpet_id);
|
|
break;
|
|
case X86_IRQ_ALLOC_TYPE_MSI:
|
|
case X86_IRQ_ALLOC_TYPE_MSIX:
|
|
iommu = map_dev_to_ir(info->msi_dev);
|
|
break;
|
|
default:
|
|
BUG_ON(1);
|
|
break;
|
|
}
|
|
|
|
return iommu ? iommu->ir_domain : NULL;
|
|
}
|
|
|
|
static struct irq_domain *intel_get_irq_domain(struct irq_alloc_info *info)
|
|
{
|
|
struct intel_iommu *iommu;
|
|
|
|
if (!info)
|
|
return NULL;
|
|
|
|
switch (info->type) {
|
|
case X86_IRQ_ALLOC_TYPE_MSI:
|
|
case X86_IRQ_ALLOC_TYPE_MSIX:
|
|
iommu = map_dev_to_ir(info->msi_dev);
|
|
if (iommu)
|
|
return iommu->ir_msi_domain;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
struct irq_remap_ops intel_irq_remap_ops = {
|
|
.prepare = intel_prepare_irq_remapping,
|
|
.enable = intel_enable_irq_remapping,
|
|
.disable = disable_irq_remapping,
|
|
.reenable = reenable_irq_remapping,
|
|
.enable_faulting = enable_drhd_fault_handling,
|
|
.get_ir_irq_domain = intel_get_ir_irq_domain,
|
|
.get_irq_domain = intel_get_irq_domain,
|
|
};
|
|
|
|
static void intel_ir_reconfigure_irte(struct irq_data *irqd, bool force)
|
|
{
|
|
struct intel_ir_data *ir_data = irqd->chip_data;
|
|
struct irte *irte = &ir_data->irte_entry;
|
|
struct irq_cfg *cfg = irqd_cfg(irqd);
|
|
|
|
/*
|
|
* Atomically updates the IRTE with the new destination, vector
|
|
* and flushes the interrupt entry cache.
|
|
*/
|
|
irte->vector = cfg->vector;
|
|
irte->dest_id = IRTE_DEST(cfg->dest_apicid);
|
|
|
|
/* Update the hardware only if the interrupt is in remapped mode. */
|
|
if (force || ir_data->irq_2_iommu.mode == IRQ_REMAPPING)
|
|
modify_irte(&ir_data->irq_2_iommu, irte);
|
|
}
|
|
|
|
/*
|
|
* Migrate the IO-APIC irq in the presence of intr-remapping.
|
|
*
|
|
* For both level and edge triggered, irq migration is a simple atomic
|
|
* update(of vector and cpu destination) of IRTE and flush the hardware cache.
|
|
*
|
|
* For level triggered, we eliminate the io-apic RTE modification (with the
|
|
* updated vector information), by using a virtual vector (io-apic pin number).
|
|
* Real vector that is used for interrupting cpu will be coming from
|
|
* the interrupt-remapping table entry.
|
|
*
|
|
* As the migration is a simple atomic update of IRTE, the same mechanism
|
|
* is used to migrate MSI irq's in the presence of interrupt-remapping.
|
|
*/
|
|
static int
|
|
intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask,
|
|
bool force)
|
|
{
|
|
struct irq_data *parent = data->parent_data;
|
|
struct irq_cfg *cfg = irqd_cfg(data);
|
|
int ret;
|
|
|
|
ret = parent->chip->irq_set_affinity(parent, mask, force);
|
|
if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
|
|
return ret;
|
|
|
|
intel_ir_reconfigure_irte(data, false);
|
|
/*
|
|
* After this point, all the interrupts will start arriving
|
|
* at the new destination. So, time to cleanup the previous
|
|
* vector allocation.
|
|
*/
|
|
send_cleanup_vector(cfg);
|
|
|
|
return IRQ_SET_MASK_OK_DONE;
|
|
}
|
|
|
|
static void intel_ir_compose_msi_msg(struct irq_data *irq_data,
|
|
struct msi_msg *msg)
|
|
{
|
|
struct intel_ir_data *ir_data = irq_data->chip_data;
|
|
|
|
*msg = ir_data->msi_entry;
|
|
}
|
|
|
|
static int intel_ir_set_vcpu_affinity(struct irq_data *data, void *info)
|
|
{
|
|
struct intel_ir_data *ir_data = data->chip_data;
|
|
struct vcpu_data *vcpu_pi_info = info;
|
|
|
|
/* stop posting interrupts, back to remapping mode */
|
|
if (!vcpu_pi_info) {
|
|
modify_irte(&ir_data->irq_2_iommu, &ir_data->irte_entry);
|
|
} else {
|
|
struct irte irte_pi;
|
|
|
|
/*
|
|
* We are not caching the posted interrupt entry. We
|
|
* copy the data from the remapped entry and modify
|
|
* the fields which are relevant for posted mode. The
|
|
* cached remapped entry is used for switching back to
|
|
* remapped mode.
|
|
*/
|
|
memset(&irte_pi, 0, sizeof(irte_pi));
|
|
dmar_copy_shared_irte(&irte_pi, &ir_data->irte_entry);
|
|
|
|
/* Update the posted mode fields */
|
|
irte_pi.p_pst = 1;
|
|
irte_pi.p_urgent = 0;
|
|
irte_pi.p_vector = vcpu_pi_info->vector;
|
|
irte_pi.pda_l = (vcpu_pi_info->pi_desc_addr >>
|
|
(32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT);
|
|
irte_pi.pda_h = (vcpu_pi_info->pi_desc_addr >> 32) &
|
|
~(-1UL << PDA_HIGH_BIT);
|
|
|
|
modify_irte(&ir_data->irq_2_iommu, &irte_pi);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip intel_ir_chip = {
|
|
.name = "INTEL-IR",
|
|
.irq_ack = apic_ack_irq,
|
|
.irq_set_affinity = intel_ir_set_affinity,
|
|
.irq_compose_msi_msg = intel_ir_compose_msi_msg,
|
|
.irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity,
|
|
};
|
|
|
|
static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
|
|
struct irq_cfg *irq_cfg,
|
|
struct irq_alloc_info *info,
|
|
int index, int sub_handle)
|
|
{
|
|
struct IR_IO_APIC_route_entry *entry;
|
|
struct irte *irte = &data->irte_entry;
|
|
struct msi_msg *msg = &data->msi_entry;
|
|
|
|
prepare_irte(irte, irq_cfg->vector, irq_cfg->dest_apicid);
|
|
switch (info->type) {
|
|
case X86_IRQ_ALLOC_TYPE_IOAPIC:
|
|
/* Set source-id of interrupt request */
|
|
set_ioapic_sid(irte, info->ioapic_id);
|
|
apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set IRTE entry (P:%d FPD:%d Dst_Mode:%d Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X Avail:%X Vector:%02X Dest:%08X SID:%04X SQ:%X SVT:%X)\n",
|
|
info->ioapic_id, irte->present, irte->fpd,
|
|
irte->dst_mode, irte->redir_hint,
|
|
irte->trigger_mode, irte->dlvry_mode,
|
|
irte->avail, irte->vector, irte->dest_id,
|
|
irte->sid, irte->sq, irte->svt);
|
|
|
|
entry = (struct IR_IO_APIC_route_entry *)info->ioapic_entry;
|
|
info->ioapic_entry = NULL;
|
|
memset(entry, 0, sizeof(*entry));
|
|
entry->index2 = (index >> 15) & 0x1;
|
|
entry->zero = 0;
|
|
entry->format = 1;
|
|
entry->index = (index & 0x7fff);
|
|
/*
|
|
* IO-APIC RTE will be configured with virtual vector.
|
|
* irq handler will do the explicit EOI to the io-apic.
|
|
*/
|
|
entry->vector = info->ioapic_pin;
|
|
entry->mask = 0; /* enable IRQ */
|
|
entry->trigger = info->ioapic_trigger;
|
|
entry->polarity = info->ioapic_polarity;
|
|
if (info->ioapic_trigger)
|
|
entry->mask = 1; /* Mask level triggered irqs. */
|
|
break;
|
|
|
|
case X86_IRQ_ALLOC_TYPE_HPET:
|
|
case X86_IRQ_ALLOC_TYPE_MSI:
|
|
case X86_IRQ_ALLOC_TYPE_MSIX:
|
|
if (info->type == X86_IRQ_ALLOC_TYPE_HPET)
|
|
set_hpet_sid(irte, info->hpet_id);
|
|
else
|
|
set_msi_sid(irte, info->msi_dev);
|
|
|
|
msg->address_hi = MSI_ADDR_BASE_HI;
|
|
msg->data = sub_handle;
|
|
msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
|
|
MSI_ADDR_IR_SHV |
|
|
MSI_ADDR_IR_INDEX1(index) |
|
|
MSI_ADDR_IR_INDEX2(index);
|
|
break;
|
|
|
|
default:
|
|
BUG_ON(1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void intel_free_irq_resources(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *irq_data;
|
|
struct intel_ir_data *data;
|
|
struct irq_2_iommu *irq_iommu;
|
|
unsigned long flags;
|
|
int i;
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_data = irq_domain_get_irq_data(domain, virq + i);
|
|
if (irq_data && irq_data->chip_data) {
|
|
data = irq_data->chip_data;
|
|
irq_iommu = &data->irq_2_iommu;
|
|
raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
|
|
clear_entries(irq_iommu);
|
|
raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
|
|
irq_domain_reset_irq_data(irq_data);
|
|
kfree(data);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int intel_irq_remapping_alloc(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs,
|
|
void *arg)
|
|
{
|
|
struct intel_iommu *iommu = domain->host_data;
|
|
struct irq_alloc_info *info = arg;
|
|
struct intel_ir_data *data, *ird;
|
|
struct irq_data *irq_data;
|
|
struct irq_cfg *irq_cfg;
|
|
int i, ret, index;
|
|
|
|
if (!info || !iommu)
|
|
return -EINVAL;
|
|
if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI &&
|
|
info->type != X86_IRQ_ALLOC_TYPE_MSIX)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* With IRQ remapping enabled, don't need contiguous CPU vectors
|
|
* to support multiple MSI interrupts.
|
|
*/
|
|
if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
|
|
info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
|
|
|
|
ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = -ENOMEM;
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
goto out_free_parent;
|
|
|
|
down_read(&dmar_global_lock);
|
|
index = alloc_irte(iommu, &data->irq_2_iommu, nr_irqs);
|
|
up_read(&dmar_global_lock);
|
|
if (index < 0) {
|
|
pr_warn("Failed to allocate IRTE\n");
|
|
kfree(data);
|
|
goto out_free_parent;
|
|
}
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
irq_data = irq_domain_get_irq_data(domain, virq + i);
|
|
irq_cfg = irqd_cfg(irq_data);
|
|
if (!irq_data || !irq_cfg) {
|
|
ret = -EINVAL;
|
|
goto out_free_data;
|
|
}
|
|
|
|
if (i > 0) {
|
|
ird = kzalloc(sizeof(*ird), GFP_KERNEL);
|
|
if (!ird)
|
|
goto out_free_data;
|
|
/* Initialize the common data */
|
|
ird->irq_2_iommu = data->irq_2_iommu;
|
|
ird->irq_2_iommu.sub_handle = i;
|
|
} else {
|
|
ird = data;
|
|
}
|
|
|
|
irq_data->hwirq = (index << 16) + i;
|
|
irq_data->chip_data = ird;
|
|
irq_data->chip = &intel_ir_chip;
|
|
intel_irq_remapping_prepare_irte(ird, irq_cfg, info, index, i);
|
|
irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
|
|
}
|
|
return 0;
|
|
|
|
out_free_data:
|
|
intel_free_irq_resources(domain, virq, i);
|
|
out_free_parent:
|
|
irq_domain_free_irqs_common(domain, virq, nr_irqs);
|
|
return ret;
|
|
}
|
|
|
|
static void intel_irq_remapping_free(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
intel_free_irq_resources(domain, virq, nr_irqs);
|
|
irq_domain_free_irqs_common(domain, virq, nr_irqs);
|
|
}
|
|
|
|
static int intel_irq_remapping_activate(struct irq_domain *domain,
|
|
struct irq_data *irq_data, bool reserve)
|
|
{
|
|
intel_ir_reconfigure_irte(irq_data, true);
|
|
return 0;
|
|
}
|
|
|
|
static void intel_irq_remapping_deactivate(struct irq_domain *domain,
|
|
struct irq_data *irq_data)
|
|
{
|
|
struct intel_ir_data *data = irq_data->chip_data;
|
|
struct irte entry;
|
|
|
|
memset(&entry, 0, sizeof(entry));
|
|
modify_irte(&data->irq_2_iommu, &entry);
|
|
}
|
|
|
|
static const struct irq_domain_ops intel_ir_domain_ops = {
|
|
.alloc = intel_irq_remapping_alloc,
|
|
.free = intel_irq_remapping_free,
|
|
.activate = intel_irq_remapping_activate,
|
|
.deactivate = intel_irq_remapping_deactivate,
|
|
};
|
|
|
|
/*
|
|
* Support of Interrupt Remapping Unit Hotplug
|
|
*/
|
|
static int dmar_ir_add(struct dmar_drhd_unit *dmaru, struct intel_iommu *iommu)
|
|
{
|
|
int ret;
|
|
int eim = x2apic_enabled();
|
|
|
|
if (eim && !ecap_eim_support(iommu->ecap)) {
|
|
pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n",
|
|
iommu->reg_phys, iommu->ecap);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (ir_parse_ioapic_hpet_scope(dmaru->hdr, iommu)) {
|
|
pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n",
|
|
iommu->reg_phys);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* TODO: check all IOAPICs are covered by IOMMU */
|
|
|
|
/* Setup Interrupt-remapping now. */
|
|
ret = intel_setup_irq_remapping(iommu);
|
|
if (ret) {
|
|
pr_err("Failed to setup irq remapping for %s\n",
|
|
iommu->name);
|
|
intel_teardown_irq_remapping(iommu);
|
|
ir_remove_ioapic_hpet_scope(iommu);
|
|
} else {
|
|
iommu_enable_irq_remapping(iommu);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
|
|
{
|
|
int ret = 0;
|
|
struct intel_iommu *iommu = dmaru->iommu;
|
|
|
|
if (!irq_remapping_enabled)
|
|
return 0;
|
|
if (iommu == NULL)
|
|
return -EINVAL;
|
|
if (!ecap_ir_support(iommu->ecap))
|
|
return 0;
|
|
if (irq_remapping_cap(IRQ_POSTING_CAP) &&
|
|
!cap_pi_support(iommu->cap))
|
|
return -EBUSY;
|
|
|
|
if (insert) {
|
|
if (!iommu->ir_table)
|
|
ret = dmar_ir_add(dmaru, iommu);
|
|
} else {
|
|
if (iommu->ir_table) {
|
|
if (!bitmap_empty(iommu->ir_table->bitmap,
|
|
INTR_REMAP_TABLE_ENTRIES)) {
|
|
ret = -EBUSY;
|
|
} else {
|
|
iommu_disable_irq_remapping(iommu);
|
|
intel_teardown_irq_remapping(iommu);
|
|
ir_remove_ioapic_hpet_scope(iommu);
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|