linux_dsm_epyc7002/drivers/clocksource/renesas-ostm.c
Geert Uytterhoeven b35a5e5961 clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
Currently all OSTM devices are called "ostm", also in kernel messages.

As there can be multiple instances in an SoC, this can confuse the user.
Hence construct a unique name from the DT node name, like is done for
platform devices.

On RSK+RZA1, the boot log changes like:

    -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
    +clocksource: timer@fcfec000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
     sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns
    -ostm: used for clocksource
    -ostm: used for clock events
    +/soc/timer@fcfec000: used for clocksource
    +/soc/timer@fcfec400: used for clock events
     ...
    -clocksource: Switched to clocksource ostm
    +clocksource: Switched to clocksource timer@fcfec000

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-5-geert+renesas@glider.be
2019-11-04 10:38:46 +01:00

212 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas Timer Support - OSTM
*
* Copyright (C) 2017 Renesas Electronics America, Inc.
* Copyright (C) 2017 Chris Brandt
*/
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include <linux/slab.h>
#include "timer-of.h"
/*
* The OSTM contains independent channels.
* The first OSTM channel probed will be set up as a free running
* clocksource. Additionally we will use this clocksource for the system
* schedule timer sched_clock().
*
* The second (or more) channel probed will be set up as an interrupt
* driven clock event.
*/
static void __iomem *system_clock; /* For sched_clock() */
/* OSTM REGISTERS */
#define OSTM_CMP 0x000 /* RW,32 */
#define OSTM_CNT 0x004 /* R,32 */
#define OSTM_TE 0x010 /* R,8 */
#define OSTM_TS 0x014 /* W,8 */
#define OSTM_TT 0x018 /* W,8 */
#define OSTM_CTL 0x020 /* RW,8 */
#define TE 0x01
#define TS 0x01
#define TT 0x01
#define CTL_PERIODIC 0x00
#define CTL_ONESHOT 0x02
#define CTL_FREERUN 0x02
static void ostm_timer_stop(struct timer_of *to)
{
if (readb(timer_of_base(to) + OSTM_TE) & TE) {
writeb(TT, timer_of_base(to) + OSTM_TT);
/*
* Read back the register simply to confirm the write operation
* has completed since I/O writes can sometimes get queued by
* the bus architecture.
*/
while (readb(timer_of_base(to) + OSTM_TE) & TE)
;
}
}
static int __init ostm_init_clksrc(struct timer_of *to)
{
ostm_timer_stop(to);
writel(0, timer_of_base(to) + OSTM_CMP);
writeb(CTL_FREERUN, timer_of_base(to) + OSTM_CTL);
writeb(TS, timer_of_base(to) + OSTM_TS);
return clocksource_mmio_init(timer_of_base(to) + OSTM_CNT,
to->np->full_name, timer_of_rate(to), 300,
32, clocksource_mmio_readl_up);
}
static u64 notrace ostm_read_sched_clock(void)
{
return readl(system_clock);
}
static void __init ostm_init_sched_clock(struct timer_of *to)
{
system_clock = timer_of_base(to) + OSTM_CNT;
sched_clock_register(ostm_read_sched_clock, 32, timer_of_rate(to));
}
static int ostm_clock_event_next(unsigned long delta,
struct clock_event_device *ced)
{
struct timer_of *to = to_timer_of(ced);
ostm_timer_stop(to);
writel(delta, timer_of_base(to) + OSTM_CMP);
writeb(CTL_ONESHOT, timer_of_base(to) + OSTM_CTL);
writeb(TS, timer_of_base(to) + OSTM_TS);
return 0;
}
static int ostm_shutdown(struct clock_event_device *ced)
{
struct timer_of *to = to_timer_of(ced);
ostm_timer_stop(to);
return 0;
}
static int ostm_set_periodic(struct clock_event_device *ced)
{
struct timer_of *to = to_timer_of(ced);
if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
ostm_timer_stop(to);
writel(timer_of_period(to) - 1, timer_of_base(to) + OSTM_CMP);
writeb(CTL_PERIODIC, timer_of_base(to) + OSTM_CTL);
writeb(TS, timer_of_base(to) + OSTM_TS);
return 0;
}
static int ostm_set_oneshot(struct clock_event_device *ced)
{
struct timer_of *to = to_timer_of(ced);
ostm_timer_stop(to);
return 0;
}
static irqreturn_t ostm_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ced = dev_id;
if (clockevent_state_oneshot(ced))
ostm_timer_stop(to_timer_of(ced));
/* notify clockevent layer */
if (ced->event_handler)
ced->event_handler(ced);
return IRQ_HANDLED;
}
static int __init ostm_init_clkevt(struct timer_of *to)
{
struct clock_event_device *ced = &to->clkevt;
ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
ced->set_state_shutdown = ostm_shutdown;
ced->set_state_periodic = ostm_set_periodic;
ced->set_state_oneshot = ostm_set_oneshot;
ced->set_next_event = ostm_clock_event_next;
ced->shift = 32;
ced->rating = 300;
ced->cpumask = cpumask_of(0);
clockevents_config_and_register(ced, timer_of_rate(to), 0xf,
0xffffffff);
return 0;
}
static int __init ostm_init(struct device_node *np)
{
struct timer_of *to;
int ret;
to = kzalloc(sizeof(*to), GFP_KERNEL);
if (!to)
return -ENOMEM;
to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
if (system_clock) {
/*
* clock sources don't use interrupts, clock events do
*/
to->flags |= TIMER_OF_IRQ;
to->of_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
to->of_irq.handler = ostm_timer_interrupt;
}
ret = timer_of_init(np, to);
if (ret)
goto err_free;
/*
* First probed device will be used as system clocksource. Any
* additional devices will be used as clock events.
*/
if (!system_clock) {
ret = ostm_init_clksrc(to);
if (ret)
goto err_cleanup;
ostm_init_sched_clock(to);
pr_info("%pOF: used for clocksource\n", np);
} else {
ret = ostm_init_clkevt(to);
if (ret)
goto err_cleanup;
pr_info("%pOF: used for clock events\n", np);
}
return 0;
err_cleanup:
timer_of_cleanup(to);
err_free:
kfree(to);
return ret;
}
TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);