AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 00:46:43 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
8bdbf16908
linux_dsm_epyc7002/arch/arm/boot/dts/rk3288.dtsi
Johan Jonker 9b505cf549 ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodes 
An experimental test with the command below gives
for example this error:

arch/arm/boot/dts/rk3036-evb.dt.yaml: i2s@10220000:
'#address-cells', '#size-cells'
do not match any of the regexes: 'pinctrl-[0-9]+'

'#address-cells' and '#size-cells' are not a valid property
for i2s nodes, so remove them.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-i2s.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200311162524.19748-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17 01:24:06 +01:00

2006 lines
48 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/power/rk3288-power.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/power/rk3288-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
compatible = "rockchip,rk3288";
interrupt-parent = <&gic>;
aliases {
ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
mshc0 = &emmc;
mshc1 = &sdmmc;
mshc2 = &sdio0;
mshc3 = &sdio1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
};
arm-pmu {
compatible = "arm,cortex-a12-pmu";
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
rockchip,pmu = <&pmu>;
cpu0: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x500>;
resets = <&cru SRST_CORE0>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
dynamic-power-coefficient = <370>;
};
cpu1: cpu@501 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
dynamic-power-coefficient = <370>;
};
cpu2: cpu@502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
dynamic-power-coefficient = <370>;
};
cpu3: cpu@503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
dynamic-power-coefficient = <370>;
};
};
cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-126000000 {
opp-hz = /bits/ 64 <126000000>;
opp-microvolt = <900000>;
};
opp-216000000 {
opp-hz = /bits/ 64 <216000000>;
opp-microvolt = <900000>;
};
opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <900000>;
};
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <900000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
};
opp-696000000 {
opp-hz = /bits/ 64 <696000000>;
opp-microvolt = <950000>;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1000000>;
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1050000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1100000>;
};
opp-1416000000 {
opp-hz = /bits/ 64 <1416000000>;
opp-microvolt = <1200000>;
};
opp-1512000000 {
opp-hz = /bits/ 64 <1512000000>;
opp-microvolt = <1300000>;
};
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <1350000>;
};
};
amba: bus {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dmac_peri: dma-controller@ff250000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff250000 0x0 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC2>;
clock-names = "apb_pclk";
};
dmac_bus_ns: dma-controller@ff600000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff600000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
status = "disabled";
};
dmac_bus_s: dma-controller@ffb20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xffb20000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* The rk3288 cannot use the memory area above 0xfe000000
* for dma operations for some reason. While there is
* probably a better solution available somewhere, we
* haven't found it yet and while devices with 2GB of ram
* are not affected, this issue prevents 4GB from booting.
* So to make these devices at least bootable, block
* this area for the time being until the real solution
* is found.
*/
dma-unusable@fe000000 {
reg = <0x0 0xfe000000 0x0 0x1000000>;
};
};
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
timer {
compatible = "arm,armv7-timer";
arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
arm,no-tick-in-suspend;
};
timer: timer@ff810000 {
compatible = "rockchip,rk3288-timer";
reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>, <&cru PCLK_TIMER>;
clock-names = "timer", "pclk";
};
display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vopl_out>, <&vopb_out>;
};
sdmmc: mmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0c0000 0x0 0x4000>;
resets = <&cru SRST_MMC0>;
reset-names = "reset";
status = "disabled";
};
sdio0: mmc@ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
<&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0d0000 0x0 0x4000>;
resets = <&cru SRST_SDIO0>;
reset-names = "reset";
status = "disabled";
};
sdio1: mmc@ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
<&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0e0000 0x0 0x4000>;
resets = <&cru SRST_SDIO1>;
reset-names = "reset";
status = "disabled";
};
emmc: mmc@ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0f0000 0x0 0x4000>;
resets = <&cru SRST_EMMC>;
reset-names = "reset";
status = "disabled";
};
saradc: saradc@ff100000 {
compatible = "rockchip,saradc";
reg = <0x0 0xff100000 0x0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};
spi0: spi@ff110000 {
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac_peri 11>, <&dmac_peri 12>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
reg = <0x0 0xff110000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@ff120000 {
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac_peri 13>, <&dmac_peri 14>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
reg = <0x0 0xff120000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@ff130000 {
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac_peri 15>, <&dmac_peri 16>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
reg = <0x0 0xff130000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@ff140000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff140000 0x0 0x1000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
status = "disabled";
};
i2c3: i2c@ff150000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff150000 0x0 0x1000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
status = "disabled";
};
i2c4: i2c@ff160000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff160000 0x0 0x1000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C4>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer>;
status = "disabled";
};
i2c5: i2c@ff170000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff170000 0x0 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C5>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_xfer>;
status = "disabled";
};
uart0: serial@ff180000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0x0 0xff180000 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac_peri 1>, <&dmac_peri 2>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "disabled";
};
uart1: serial@ff190000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0x0 0xff190000 0x0 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac_peri 3>, <&dmac_peri 4>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
};
uart2: serial@ff690000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0x0 0xff690000 0x0 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
status = "disabled";
};
uart3: serial@ff1b0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0x0 0xff1b0000 0x0 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac_peri 7>, <&dmac_peri 8>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
status = "disabled";
};
uart4: serial@ff1c0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0x0 0xff1c0000 0x0 0x100>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac_peri 9>, <&dmac_peri 10>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart4_xfer>;
status = "disabled";
};
thermal-zones {
reserve_thermal: reserve_thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 0>;
};
cpu_thermal: cpu_thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 1>;
trips {
cpu_alert0: cpu_alert0 {
temperature = <70000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert1: cpu_alert1 {
temperature = <75000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT 6>,
<&cpu1 THERMAL_NO_LIMIT 6>,
<&cpu2 THERMAL_NO_LIMIT 6>,
<&cpu3 THERMAL_NO_LIMIT 6>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu_thermal: gpu_thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 2>;
trips {
gpu_alert0: gpu_alert0 {
temperature = <70000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
gpu_crit: gpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&gpu_alert0>;
cooling-device =
<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
tsadc: tsadc@ff280000 {
compatible = "rockchip,rk3288-tsadc";
reg = <0x0 0xff280000 0x0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "init", "default", "sleep";
pinctrl-0 = <&otp_gpio>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
rockchip,grf = <&grf>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
};
gmac: ethernet@ff290000 {
compatible = "rockchip,rk3288-gmac";
reg = <0x0 0xff290000 0x0 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
rockchip,grf = <&grf>;
clocks = <&cru SCLK_MAC>,
<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
clock-names = "stmmaceth",
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
resets = <&cru SRST_MAC>;
reset-names = "stmmaceth";
status = "disabled";
};
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0x0 0xff500000 0x0 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
};
/* NOTE: ohci@ff520000 doesn't actually work on hardware */
usb_host1: usb@ff540000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x0 0xff540000 0x0 0x40000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
snps,reset-phy-on-wake;
status = "disabled";
};
usb_otg: usb@ff580000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x0 0xff580000 0x0 0x40000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <275>;
g-tx-fifo-size = <256 128 128 64 64 32>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
};
usb_hsic: usb@ff5c0000 {
compatible = "generic-ehci";
reg = <0x0 0xff5c0000 0x0 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HSIC>;
status = "disabled";
};
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff650000 0x0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
status = "disabled";
};
i2c2: i2c@ff660000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff660000 0x0 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
status = "disabled";
};
pwm0: pwm@ff680000 {
compatible = "rockchip,rk3288-pwm";
reg = <0x0 0xff680000 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
pwm1: pwm@ff680010 {
compatible = "rockchip,rk3288-pwm";
reg = <0x0 0xff680010 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
pwm2: pwm@ff680020 {
compatible = "rockchip,rk3288-pwm";
reg = <0x0 0xff680020 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
pwm3: pwm@ff680030 {
compatible = "rockchip,rk3288-pwm";
reg = <0x0 0xff680030 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
bus_intmem: sram@ff700000 {
compatible = "mmio-sram";
reg = <0x0 0xff700000 0x0 0x18000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xff700000 0x18000>;
smp-sram@0 {
compatible = "rockchip,rk3066-smp-sram";
reg = <0x00 0x10>;
};
};
pmu_sram: sram@ff720000 {
compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
reg = <0x0 0xff720000 0x0 0x1000>;
};
pmu: power-management@ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
reg = <0x0 0xff730000 0x0 0x100>;
power: power-controller {
compatible = "rockchip,rk3288-power-controller";
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
assigned-clocks = <&cru SCLK_EDP_24M>;
assigned-clock-parents = <&xin24m>;
/*
* Note: Although SCLK_* are the working clocks
* of device without including on the NOC, needed for
* synchronous reset.
*
* The clocks on the which NOC:
* ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
* ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
* ACLK_RGA is on ACLK_RGA_NIU.
* The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
*
* Which clock are device clocks:
* clocks devices
* *_IEP IEP:Image Enhancement Processor
* *_ISP ISP:Image Signal Processing
* *_VIP VIP:Video Input Processor
* *_VOP* VOP:Visual Output Processor
* *_RGA RGA
* *_EDP* EDP
* *_LVDS_* LVDS
* *_HDMI HDMI
* *_MIPI_* MIPI
*/
pd_vio@RK3288_PD_VIO {
reg = <RK3288_PD_VIO>;
clocks = <&cru ACLK_IEP>,
<&cru ACLK_ISP>,
<&cru ACLK_RGA>,
<&cru ACLK_VIP>,
<&cru ACLK_VOP0>,
<&cru ACLK_VOP1>,
<&cru DCLK_VOP0>,
<&cru DCLK_VOP1>,
<&cru HCLK_IEP>,
<&cru HCLK_ISP>,
<&cru HCLK_RGA>,
<&cru HCLK_VIP>,
<&cru HCLK_VOP0>,
<&cru HCLK_VOP1>,
<&cru PCLK_EDP_CTRL>,
<&cru PCLK_HDMI_CTRL>,
<&cru PCLK_LVDS_PHY>,
<&cru PCLK_MIPI_CSI>,
<&cru PCLK_MIPI_DSI0>,
<&cru PCLK_MIPI_DSI1>,
<&cru SCLK_EDP_24M>,
<&cru SCLK_EDP>,
<&cru SCLK_ISP_JPE>,
<&cru SCLK_ISP>,
<&cru SCLK_RGA>;
pm_qos = <&qos_vio0_iep>,
<&qos_vio1_vop>,
<&qos_vio1_isp_w0>,
<&qos_vio1_isp_w1>,
<&qos_vio0_vop>,
<&qos_vio0_vip>,
<&qos_vio2_rga_r>,
<&qos_vio2_rga_w>,
<&qos_vio1_isp_r>;
};
/*
* Note: The following 3 are HEVC(H.265) clocks,
* and on the ACLK_HEVC_NIU (NOC).
*/
pd_hevc@RK3288_PD_HEVC {
reg = <RK3288_PD_HEVC>;
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
<&cru SCLK_HEVC_CORE>;
pm_qos = <&qos_hevc_r>,
<&qos_hevc_w>;
};
/*
* Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
* (video endecoder & decoder) clocks that on the
* ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
*/
pd_video@RK3288_PD_VIDEO {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
pm_qos = <&qos_video>;
};
/*
* Note: ACLK_GPU is the GPU clock,
* and on the ACLK_GPU_NIU (NOC).
*/
pd_gpu@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
<&qos_gpu_w>;
};
};
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x94>;
mode-normal = <BOOT_NORMAL>;
mode-recovery = <BOOT_RECOVERY>;
mode-bootloader = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
};
};
sgrf: syscon@ff740000 {
compatible = "rockchip,rk3288-sgrf", "syscon";
reg = <0x0 0xff740000 0x0 0x1000>;
};
cru: clock-controller@ff760000 {
compatible = "rockchip,rk3288-cru";
reg = <0x0 0xff760000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
<&cru PLL_NPLL>, <&cru ACLK_CPU>,
<&cru HCLK_CPU>, <&cru PCLK_CPU>,
<&cru ACLK_PERI>, <&cru HCLK_PERI>,
<&cru PCLK_PERI>;
assigned-clock-rates = <594000000>, <400000000>,
<500000000>, <300000000>,
<150000000>, <75000000>,
<300000000>, <150000000>,
<75000000>;
};
grf: syscon@ff770000 {
compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
reg = <0x0 0xff770000 0x0 0x1000>;
edp_phy: edp-phy {
compatible = "rockchip,rk3288-dp-phy";
clocks = <&cru SCLK_EDP_24M>;
clock-names = "24m";
#phy-cells = <0>;
status = "disabled";
};
io_domains: io-domains {
compatible = "rockchip,rk3288-io-voltage-domain";
status = "disabled";
};
usbphy: usbphy {
compatible = "rockchip,rk3288-usb-phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
usbphy0: usb-phy@320 {
#phy-cells = <0>;
reg = <0x320>;
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBOTG_PHY>;
reset-names = "phy-reset";
};
usbphy1: usb-phy@334 {
#phy-cells = <0>;
reg = <0x334>;
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST0_PHY>;
reset-names = "phy-reset";
};
usbphy2: usb-phy@348 {
#phy-cells = <0>;
reg = <0x348>;
clocks = <&cru SCLK_OTGPHY2>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST1_PHY>;
reset-names = "phy-reset";
};
};
};
wdt: watchdog@ff800000 {
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
reg = <0x0 0xff800000 0x0 0x100>;
clocks = <&cru PCLK_WDT>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
spdif: sound@ff88b0000 {
compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
reg = <0x0 0xff8b0000 0x0 0x10000>;
#sound-dai-cells = <0>;
clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
clock-names = "mclk", "hclk";
dmas = <&dmac_bus_s 3>;
dma-names = "tx";
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
rockchip,grf = <&grf>;
status = "disabled";
};
i2s: i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff890000 0x0 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
rockchip,playback-channels = <8>;
rockchip,capture-channels = <2>;
status = "disabled";
};
crypto: cypto-controller@ff8a0000 {
compatible = "rockchip,rk3288-crypto";
reg = <0x0 0xff8a0000 0x0 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
<&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
resets = <&cru SRST_CRYPTO>;
reset-names = "crypto-rst";
status = "okay";
};
iep_mmu: iommu@ff900800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x40>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
isp_mmu: iommu@ff914000 {
compatible = "rockchip,iommu";
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "isp_mmu";
clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
rockchip,disable-mmu-reset;
status = "disabled";
};
rga: rga@ff920000 {
compatible = "rockchip,rk3288-rga";
reg = <0x0 0xff920000 0x0 0x180>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
clock-names = "aclk", "hclk", "sclk";
power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
reset-names = "core", "axi", "ahb";
};
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
status = "disabled";
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopb_out_hdmi: endpoint@0 {
reg = <0>;
remote-endpoint = <&hdmi_in_vopb>;
};
vopb_out_edp: endpoint@1 {
reg = <1>;
remote-endpoint = <&edp_in_vopb>;
};
vopb_out_mipi: endpoint@2 {
reg = <2>;
remote-endpoint = <&mipi_in_vopb>;
};
vopb_out_lvds: endpoint@3 {
reg = <3>;
remote-endpoint = <&lvds_in_vopb>;
};
};
};
vopb_mmu: iommu@ff930300 {
compatible = "rockchip,iommu";
reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
vopl: vop@ff940000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
status = "disabled";
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopl_out_hdmi: endpoint@0 {
reg = <0>;
remote-endpoint = <&hdmi_in_vopl>;
};
vopl_out_edp: endpoint@1 {
reg = <1>;
remote-endpoint = <&edp_in_vopl>;
};
vopl_out_mipi: endpoint@2 {
reg = <2>;
remote-endpoint = <&mipi_in_vopl>;
};
vopl_out_lvds: endpoint@3 {
reg = <3>;
remote-endpoint = <&lvds_in_vopl>;
};
};
};
vopl_mmu: iommu@ff940300 {
compatible = "rockchip,iommu";
reg = <0x0 0xff940300 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
mipi_dsi: mipi@ff960000 {
compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff960000 0x0 0x4000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
clock-names = "ref", "pclk";
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";
ports {
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
mipi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_mipi>;
};
mipi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_mipi>;
};
};
};
};
lvds: lvds@ff96c000 {
compatible = "rockchip,rk3288-lvds";
reg = <0x0 0xff96c000 0x0 0x4000>;
clocks = <&cru PCLK_LVDS_PHY>;
clock-names = "pclk_lvds";
pinctrl-names = "lcdc";
pinctrl-0 = <&lcdc_ctl>;
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
lvds_in: port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
lvds_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_lvds>;
};
lvds_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_lvds>;
};
};
};
};
edp: dp@ff970000 {
compatible = "rockchip,rk3288-dp";
reg = <0x0 0xff970000 0x0 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
clock-names = "dp", "pclk";
phys = <&edp_phy>;
phy-names = "dp";
resets = <&cru SRST_EDP>;
reset-names = "dp";
rockchip,grf = <&grf>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
edp_in: port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
edp_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_edp>;
};
edp_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_edp>;
};
};
};
};
hdmi: hdmi@ff980000 {
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0x0 0xff980000 0x0 0x20000>;
reg-io-width = <4>;
#sound-dai-cells = <0>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
clock-names = "iahb", "isfr", "cec";
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
ports {
hdmi_in: port {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_hdmi>;
};
hdmi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_hdmi>;
};
};
};
};
vpu: video-codec@ff9a0000 {
compatible = "rockchip,rk3288-vpu";
reg = <0x0 0xff9a0000 0x0 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
clock-names = "aclk", "hclk";
iommus = <&vpu_mmu>;
power-domains = <&power RK3288_PD_VIDEO>;
};
vpu_mmu: iommu@ff9a0800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff9a0800 0x0 0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
power-domains = <&power RK3288_PD_VIDEO>;
};
hevc_mmu: iommu@ff9c0440 {
compatible = "rockchip,iommu";
reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hevc_mmu";
clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
gpu: gpu@ffa30000 {
compatible = "rockchip,rk3288-mali", "arm,mali-t760";
reg = <0x0 0xffa30000 0x0 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
operating-points-v2 = <&gpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
power-domains = <&power RK3288_PD_GPU>;
status = "disabled";
};
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <950000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <950000>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1000000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1100000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1250000>;
};
};
qos_gpu_r: qos@ffaa0000 {
compatible = "syscon";
reg = <0x0 0xffaa0000 0x0 0x20>;
};
qos_gpu_w: qos@ffaa0080 {
compatible = "syscon";
reg = <0x0 0xffaa0080 0x0 0x20>;
};
qos_vio1_vop: qos@ffad0000 {
compatible = "syscon";
reg = <0x0 0xffad0000 0x0 0x20>;
};
qos_vio1_isp_w0: qos@ffad0100 {
compatible = "syscon";
reg = <0x0 0xffad0100 0x0 0x20>;
};
qos_vio1_isp_w1: qos@ffad0180 {
compatible = "syscon";
reg = <0x0 0xffad0180 0x0 0x20>;
};
qos_vio0_vop: qos@ffad0400 {
compatible = "syscon";
reg = <0x0 0xffad0400 0x0 0x20>;
};
qos_vio0_vip: qos@ffad0480 {
compatible = "syscon";
reg = <0x0 0xffad0480 0x0 0x20>;
};
qos_vio0_iep: qos@ffad0500 {
compatible = "syscon";
reg = <0x0 0xffad0500 0x0 0x20>;
};
qos_vio2_rga_r: qos@ffad0800 {
compatible = "syscon";
reg = <0x0 0xffad0800 0x0 0x20>;
};
qos_vio2_rga_w: qos@ffad0880 {
compatible = "syscon";
reg = <0x0 0xffad0880 0x0 0x20>;
};
qos_vio1_isp_r: qos@ffad0900 {
compatible = "syscon";
reg = <0x0 0xffad0900 0x0 0x20>;
};
qos_video: qos@ffae0000 {
compatible = "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
};
qos_hevc_r: qos@ffaf0000 {
compatible = "syscon";
reg = <0x0 0xffaf0000 0x0 0x20>;
};
qos_hevc_w: qos@ffaf0080 {
compatible = "syscon";
reg = <0x0 0xffaf0080 0x0 0x20>;
};
efuse: efuse@ffb40000 {
compatible = "rockchip,rk3288-efuse";
reg = <0x0 0xffb40000 0x0 0x20>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&cru PCLK_EFUSE256>;
clock-names = "pclk_efuse";
cpu_id: cpu-id@7 {
reg = <0x07 0x10>;
};
cpu_leakage: cpu_leakage@17 {
reg = <0x17 0x1>;
};
};
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x0 0xffc01000 0x0 0x1000>,
<0x0 0xffc02000 0x0 0x2000>,
<0x0 0xffc04000 0x0 0x2000>,
<0x0 0xffc06000 0x0 0x2000>;
interrupts = <GIC_PPI 9 0xf04>;
};
pinctrl: pinctrl {
compatible = "rockchip,rk3288-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmu>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio0: gpio0@ff750000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff750000 0x0 0x100>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@ff780000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff780000 0x0 0x100>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@ff790000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff790000 0x0 0x100>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@ff7a0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7a0000 0x0 0x100>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio4@ff7b0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7b0000 0x0 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio5@ff7c0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7c0000 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio6@ff7d0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7d0000 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio7@ff7e0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7e0000 0x0 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO7>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio8: gpio8@ff7f0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7f0000 0x0 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
hdmi {
hdmi_cec_c0: hdmi-cec-c0 {
rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
};
hdmi_cec_c7: hdmi-cec-c7 {
rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
};
hdmi_ddc: hdmi-ddc {
rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
<7 RK_PC4 2 &pcfg_pull_none>;
};
hdmi_ddc_unwedge: hdmi-ddc-unwedge {
rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
<7 RK_PC4 2 &pcfg_pull_none>;
};
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pcfg_pull_none_12ma: pcfg-pull-none-12ma {
bias-disable;
drive-strength = <12>;
};
sleep {
global_pwroff: global-pwroff {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
ddrio_pwroff: ddrio-pwroff {
rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
};
ddr0_retention: ddr0-retention {
rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>;
};
ddr1_retention: ddr1-retention {
rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
};
};
edp {
edp_hpd: edp-hpd {
rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
<0 RK_PC0 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>,
<8 RK_PA5 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>,
<6 RK_PB2 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>,
<2 RK_PC1 1 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>,
<7 RK_PC2 1 &pcfg_pull_none>;
};
};
i2c5 {
i2c5_xfer: i2c5-xfer {
rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>,
<7 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>,
<6 RK_PA1 1 &pcfg_pull_none>,
<6 RK_PA2 1 &pcfg_pull_none>,
<6 RK_PA3 1 &pcfg_pull_none>,
<6 RK_PA4 1 &pcfg_pull_none>,
<6 RK_PB0 1 &pcfg_pull_none>;
};
};
lcdc {
lcdc_ctl: lcdc-ctl {
rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
<1 RK_PD1 1 &pcfg_pull_none>,
<1 RK_PD2 1 &pcfg_pull_none>,
<1 RK_PD3 1 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
};
sdmmc_cd: sdmmc-cd {
rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
};
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>,
<6 RK_PC1 1 &pcfg_pull_up>,
<6 RK_PC2 1 &pcfg_pull_up>,
<6 RK_PC3 1 &pcfg_pull_up>;
};
};
sdio0 {
sdio0_bus1: sdio0-bus1 {
rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>;
};
sdio0_bus4: sdio0-bus4 {
rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>,
<4 RK_PC5 1 &pcfg_pull_up>,
<4 RK_PC6 1 &pcfg_pull_up>,
<4 RK_PC7 1 &pcfg_pull_up>;
};
sdio0_cmd: sdio0-cmd {
rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>;
};
sdio0_clk: sdio0-clk {
rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>;
};
sdio0_cd: sdio0-cd {
rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>;
};
sdio0_wp: sdio0-wp {
rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>;
};
sdio0_pwr: sdio0-pwr {
rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>;
};
sdio0_bkpwr: sdio0-bkpwr {
rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>;
};
sdio0_int: sdio0-int {
rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>;
};
};
sdio1 {
sdio1_bus1: sdio1-bus1 {
rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>;
};
sdio1_bus4: sdio1-bus4 {
rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>,
<3 RK_PD1 4 &pcfg_pull_up>,
<3 RK_PD2 4 &pcfg_pull_up>,
<3 RK_PD3 4 &pcfg_pull_up>;
};
sdio1_cd: sdio1-cd {
rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>;
};
sdio1_wp: sdio1-wp {
rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>;
};
sdio1_bkpwr: sdio1-bkpwr {
rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>;
};
sdio1_int: sdio1-int {
rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>;
};
sdio1_cmd: sdio1-cmd {
rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>;
};
sdio1_clk: sdio1-clk {
rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>;
};
sdio1_pwr: sdio1-pwr {
rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>;
};
};
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>;
};
emmc_pwr: emmc-pwr {
rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>;
};
emmc_bus1: emmc-bus1 {
rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>;
};
emmc_bus4: emmc-bus4 {
rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
<3 RK_PA1 2 &pcfg_pull_up>,
<3 RK_PA2 2 &pcfg_pull_up>,
<3 RK_PA3 2 &pcfg_pull_up>;
};
emmc_bus8: emmc-bus8 {
rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
<3 RK_PA1 2 &pcfg_pull_up>,
<3 RK_PA2 2 &pcfg_pull_up>,
<3 RK_PA3 2 &pcfg_pull_up>,
<3 RK_PA4 2 &pcfg_pull_up>,
<3 RK_PA5 2 &pcfg_pull_up>,
<3 RK_PA6 2 &pcfg_pull_up>,
<3 RK_PA7 2 &pcfg_pull_up>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>;
};
};
spi2 {
spi2_cs1: spi2-cs1 {
rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>;
};
spi2_clk: spi2-clk {
rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>;
};
spi2_cs0: spi2-cs0 {
rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>;
};
spi2_rx: spi2-rx {
rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>;
};
spi2_tx: spi2-tx {
rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>,
<4 RK_PC1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>,
<5 RK_PB1 1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>,
<7 RK_PC7 1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>,
<7 RK_PB0 1 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
<5 RK_PB6 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
};
};
tsadc {
otp_gpio: otp-gpio {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>;
};
};
gmac {
rgmii_pins: rgmii-pins {
rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
<3 RK_PD7 3 &pcfg_pull_none>,
<3 RK_PD2 3 &pcfg_pull_none>,
<3 RK_PD3 3 &pcfg_pull_none>,
<3 RK_PD4 3 &pcfg_pull_none_12ma>,
<3 RK_PD5 3 &pcfg_pull_none_12ma>,
<3 RK_PD0 3 &pcfg_pull_none_12ma>,
<3 RK_PD1 3 &pcfg_pull_none_12ma>,
<4 RK_PA0 3 &pcfg_pull_none>,
<4 RK_PA5 3 &pcfg_pull_none>,
<4 RK_PA6 3 &pcfg_pull_none>,
<4 RK_PB1 3 &pcfg_pull_none_12ma>,
<4 RK_PA4 3 &pcfg_pull_none_12ma>,
<4 RK_PA1 3 &pcfg_pull_none>,
<4 RK_PA3 3 &pcfg_pull_none>;
};
rmii_pins: rmii-pins {
rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
<3 RK_PD7 3 &pcfg_pull_none>,
<3 RK_PD4 3 &pcfg_pull_none>,
<3 RK_PD5 3 &pcfg_pull_none>,
<4 RK_PA0 3 &pcfg_pull_none>,
<4 RK_PA5 3 &pcfg_pull_none>,
<4 RK_PA4 3 &pcfg_pull_none>,
<4 RK_PA1 3 &pcfg_pull_none>,
<4 RK_PA2 3 &pcfg_pull_none>,
<4 RK_PA3 3 &pcfg_pull_none>;
};
};
spdif {
spdif_tx: spdif-tx {
rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>;
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink