linux_dsm_epyc7002/drivers/scsi
Quinn Tran 8b4673ba3a scsi: qla2xxx: Add support for ZIO6 interrupt threshold
Add sysfs support to control zio6 interrupt threshold. Using this sysfs hook
user can set when to generate interrupts. This value will be used to tell
firmware to generate interrupt at a certain interval.  If the number of
exchanges/commands fall below defined setting, then the interrupt will be
generated immediately by the firmware.

By default ZIO6 will coalesce interrupts to a specified interval
regardless of low traffic or high traffic.

[mkp: fixed several typos]

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11 20:28:08 -04:00
..
aacraid scsi: aacraid: remove unused variables dev and cpu 2018-08-30 07:25:03 -04:00
aic7xxx scsi: aic7xxx: Fix build using bare-metal toolchain 2018-08-30 07:41:09 -04:00
aic94xx scsi: aic94xx: fix an error code in aic94xx_init() 2018-08-08 21:17:56 -04:00
arcmsr scsi: arcmsr: Update driver version to v1.40.00.09-20180709 2018-07-12 22:34:59 -04:00
arm treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
be2iscsi scsi: be2iscsi: remove unused variable dmsg 2018-08-30 07:25:56 -04:00
bfa scsi: bfa: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
bnx2fc treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
bnx2i scsi: bnx2i: add error handling for ioremap_nocache 2018-06-19 22:02:25 -04:00
csiostor scsi: csiostor: update csio_get_flash_params() 2018-08-02 16:22:10 -04:00
cxgbi scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() 2018-04-09 21:32:45 -04:00
cxlflash SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
device_handler Merge branch 'fixes' into misc 2018-04-03 17:38:39 -07:00
dpt
esas2r treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
fcoe SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
fnic treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
hisi_sas scsi: hisi_sas: Add SATA FIS check for v3 hw 2018-07-19 21:57:40 -04:00
ibmvscsi scsi: ibmvscsi: change strncpy+truncation to strlcpy 2018-07-30 23:17:53 -04:00
ibmvscsi_tgt scsi: target: srp, vscsi, sbp, qla: use target_remove_session 2018-08-02 15:29:31 -04:00
isci treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
libfc scsi: libfc: remove unnecessary condition check 2018-08-30 07:36:48 -04:00
libsas scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
lpfc scsi: lpfc: remove an unnecessary NULL check 2018-08-30 07:33:55 -04:00
megaraid scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
mpt3sas SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
mvsas scsi: mvsas: fix wrong endianness of sgpio api 2018-03-01 21:07:48 -05:00
osd osd: Convert to new IDA API 2018-08-21 23:54:17 -04:00
pcmcia scsi: remove the fdomain and fdomain_cs drivers 2018-03-19 22:54:47 -04:00
pm8001 treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
qedf scsi: qedf: Send the driver state to MFW 2018-07-10 22:25:23 -04:00
qedi SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
qla2xxx scsi: qla2xxx: Add support for ZIO6 interrupt threshold 2018-09-11 20:28:08 -04:00
qla4xxx treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
smartpqi scsi: smartpqi: bump driver version to 1.1.4-130 2018-06-19 22:02:25 -04:00
snic scsi: snic: fix printing time intervals 2018-07-12 23:01:16 -04:00
sym53c8xx_2 scsi: sym53c8xx: remove some redundant variables 2018-08-02 16:23:26 -04:00
ufs scsi: ufs: remove unnecessary query(DM) UPIU trace 2018-08-08 21:55:48 -04:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-sas.h
3w-xxxx.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c scsi: 53c700: move bus reset to host reset 2017-08-25 17:21:11 -04:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c scsi: a100u2w: Replace mdelay() with msleep() 2018-07-30 23:17:53 -04:00
a100u2w.h
a2091.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
aha152x.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: am53c974: Use module_pci_driver 2018-05-01 23:29:41 -04:00
atari_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
atp870u.c scsi: atp870u: Replace mdelay() with msleep() 2018-07-30 23:17:53 -04:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
dpt_i2o.c scsi: dpt_i2o: Remove VLA usage 2018-05-18 12:03:51 -04:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase 2017-08-10 19:55:35 -04:00
esp_scsi.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
FlashPoint.c
g_NCR5380.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gvp11.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c scsi: core: avoid host-wide host_busy counter for scsi_mq 2018-06-26 12:53:26 -04:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hpsa.c scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hptiop.c scsi: hptiop: Simplify reset handling 2017-08-25 17:21:10 -04:00
hptiop.h
imm.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c
initio.h
ipr.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
ipr.h scsi: ipr: Format HCAM overlay ID 0x41 2018-06-19 22:02:25 -04:00
ips.c scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
ips.h scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi_tcp: don't set a bounce limit 2018-04-19 00:00:44 -04:00
iscsi_tcp.h
jazz_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
Kconfig scsi: remove NCR_Q720 driver 2018-07-10 22:48:54 -04:00
lasi700.c parisc/scsi/lasi700: Fix section mismatches 2017-08-22 16:34:36 +02:00
libiscsi_tcp.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
libiscsi.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
mac53c94.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: mac_esp: Fix PIO transfers for MESSAGE IN phase 2017-08-10 19:55:34 -04:00
mac_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
Makefile SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
megaraid.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: mvme147: stop using scsi_module.c 2018-03-19 22:54:47 -04:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
mvumi.h
ncr53c8xx.c scsi: ncr53c8xx: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
ncr53c8xx.h
NCR5380.c SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
NCR5380.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: nsp32: fix logic bug in error handling 2017-10-16 22:38:44 -04:00
nsp32.h
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst.c treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: ppa: mark expected switch fall-throughs 2017-12-04 20:32:52 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c
qla1280.c timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicfas.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicpti.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_ioctl.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_lib.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c
scsi_priv.h scsi: dh: Remove scsi_dh_remove_device() 2017-12-07 21:13:45 -05:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_sysctl.c
scsi_sysfs.c scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock 2018-08-02 15:53:36 -04:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_transport_iscsi.c block: remove parent device reference from struct bsg_class_device 2018-05-29 13:00:25 -06:00
scsi_transport_sas.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
sd.c Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax 2018-08-26 11:48:42 -07:00
sd.h block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
sgiwd93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr.c scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled 2018-08-03 13:53:51 -04:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c scsi: st: remove redundant pointer STbuffer 2018-08-08 21:15:54 -04:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c
storvsc_drv.c use the new async probing feature for the hyperv drivers 2018-07-03 13:02:28 +02:00
sun3_scsi_vme.c
sun3_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
sun3x_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
sun_esp.c
virtio_scsi.c scsi: virtio_scsi: fix pi_bytes{out,in} on 4 KiB block size devices 2018-07-26 15:49:43 -06:00
vmw_pvscsi.c scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED 2018-08-03 13:56:22 -04:00
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: wd719x: Use module_pci_driver 2018-05-01 23:30:12 -04:00
wd719x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
xen-scsifront.c scsi: xen-scsifront: add error handling for xenbus_printf 2018-06-19 14:54:41 +02:00
zalon.c parisc/scsi/zalon: Fix section mismatches 2017-08-22 16:34:36 +02:00
zorro7xx.c
zorro_esp.c scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards 2018-04-19 00:00:44 -04:00