linux_dsm_epyc7002/drivers/mtd/ubi/fastmap-wl.c
Arne Edholm 4b68bf9a69 ubi: Select fastmap anchor PEBs considering wear level rules
There is a risk that the fastmap anchor PEB is alternating between
just two PEBs, the current anchor and the previous anchor that was just
deleted. As the fastmap pools gets the first take on free PEBs, the
pools may leave no free PEBs to be selected as the new anchor,
resulting in the two PEBs alternating behaviour. If the anchor PEBs gets
a high erase count the PEBs will not be used by the pools but remain in
ubi->free, even more increasing the likelihood they will be used as
anchors.

Getting stuck using only a couple of PEBs continuously will result in an
uneven wear, eventually leading to failure.

To fix this:

- Choose the fastmap anchor when the most free PEBs are available. This is
  during rebuilding of the fastmap pools, after the unused pool PEBs are
  added to ubi->free but before the pools are populated again from the
  free PEBs. Also reserve an additional second best PEB as a candidate
  for the next time the fast map anchor is updated. If a better PEB is
  found the next time the fast map anchor is updated, the candidate is
  made available for building the pools.

- Enable anchor move within the anchor area again as it is useful for
  distributing wear.

- The anchor candidate for the next fastmap update is the most suited free
  PEB. Check this PEB's erase count during wear leveling. If the wear
  leveling limit is exceeded, the PEB is considered unsuitable for now. As
  all other non used anchor area PEBs should be even worse, free up the
  used anchor area PEB with the lowest erase count.

Signed-off-by: Arne Edholm <arne.edholm@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02 22:53:05 +02:00

409 lines
9.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2012 Linutronix GmbH
* Copyright (c) 2014 sigma star gmbh
* Author: Richard Weinberger <richard@nod.at>
*/
/**
* update_fastmap_work_fn - calls ubi_update_fastmap from a work queue
* @wrk: the work description object
*/
static void update_fastmap_work_fn(struct work_struct *wrk)
{
struct ubi_device *ubi = container_of(wrk, struct ubi_device, fm_work);
ubi_update_fastmap(ubi);
spin_lock(&ubi->wl_lock);
ubi->fm_work_scheduled = 0;
spin_unlock(&ubi->wl_lock);
}
/**
* find_anchor_wl_entry - find wear-leveling entry to used as anchor PEB.
* @root: the RB-tree where to look for
*/
static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
{
struct rb_node *p;
struct ubi_wl_entry *e, *victim = NULL;
int max_ec = UBI_MAX_ERASECOUNTER;
ubi_rb_for_each_entry(p, e, root, u.rb) {
if (e->pnum < UBI_FM_MAX_START && e->ec < max_ec) {
victim = e;
max_ec = e->ec;
}
}
return victim;
}
static inline void return_unused_peb(struct ubi_device *ubi,
struct ubi_wl_entry *e)
{
wl_tree_add(e, &ubi->free);
ubi->free_count++;
}
/**
* return_unused_pool_pebs - returns unused PEB to the free tree.
* @ubi: UBI device description object
* @pool: fastmap pool description object
*/
static void return_unused_pool_pebs(struct ubi_device *ubi,
struct ubi_fm_pool *pool)
{
int i;
struct ubi_wl_entry *e;
for (i = pool->used; i < pool->size; i++) {
e = ubi->lookuptbl[pool->pebs[i]];
return_unused_peb(ubi, e);
}
}
/**
* ubi_wl_get_fm_peb - find a physical erase block with a given maximal number.
* @ubi: UBI device description object
* @anchor: This PEB will be used as anchor PEB by fastmap
*
* The function returns a physical erase block with a given maximal number
* and removes it from the wl subsystem.
* Must be called with wl_lock held!
*/
struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor)
{
struct ubi_wl_entry *e = NULL;
if (!ubi->free.rb_node || (ubi->free_count - ubi->beb_rsvd_pebs < 1))
goto out;
if (anchor)
e = find_anchor_wl_entry(&ubi->free);
else
e = find_mean_wl_entry(ubi, &ubi->free);
if (!e)
goto out;
self_check_in_wl_tree(ubi, e, &ubi->free);
/* remove it from the free list,
* the wl subsystem does no longer know this erase block */
rb_erase(&e->u.rb, &ubi->free);
ubi->free_count--;
out:
return e;
}
/**
* ubi_refill_pools - refills all fastmap PEB pools.
* @ubi: UBI device description object
*/
void ubi_refill_pools(struct ubi_device *ubi)
{
struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
struct ubi_fm_pool *pool = &ubi->fm_pool;
struct ubi_wl_entry *e;
int enough;
spin_lock(&ubi->wl_lock);
return_unused_pool_pebs(ubi, wl_pool);
return_unused_pool_pebs(ubi, pool);
wl_pool->size = 0;
pool->size = 0;
if (ubi->fm_anchor) {
wl_tree_add(ubi->fm_anchor, &ubi->free);
ubi->free_count++;
}
if (ubi->fm_next_anchor) {
wl_tree_add(ubi->fm_next_anchor, &ubi->free);
ubi->free_count++;
}
/* All available PEBs are in ubi->free, now is the time to get
* the best anchor PEBs.
*/
ubi->fm_anchor = ubi_wl_get_fm_peb(ubi, 1);
ubi->fm_next_anchor = ubi_wl_get_fm_peb(ubi, 1);
for (;;) {
enough = 0;
if (pool->size < pool->max_size) {
if (!ubi->free.rb_node)
break;
e = wl_get_wle(ubi);
if (!e)
break;
pool->pebs[pool->size] = e->pnum;
pool->size++;
} else
enough++;
if (wl_pool->size < wl_pool->max_size) {
if (!ubi->free.rb_node ||
(ubi->free_count - ubi->beb_rsvd_pebs < 5))
break;
e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
self_check_in_wl_tree(ubi, e, &ubi->free);
rb_erase(&e->u.rb, &ubi->free);
ubi->free_count--;
wl_pool->pebs[wl_pool->size] = e->pnum;
wl_pool->size++;
} else
enough++;
if (enough == 2)
break;
}
wl_pool->used = 0;
pool->used = 0;
spin_unlock(&ubi->wl_lock);
}
/**
* produce_free_peb - produce a free physical eraseblock.
* @ubi: UBI device description object
*
* This function tries to make a free PEB by means of synchronous execution of
* pending works. This may be needed if, for example the background thread is
* disabled. Returns zero in case of success and a negative error code in case
* of failure.
*/
static int produce_free_peb(struct ubi_device *ubi)
{
int err;
while (!ubi->free.rb_node && ubi->works_count) {
dbg_wl("do one work synchronously");
err = do_work(ubi);
if (err)
return err;
}
return 0;
}
/**
* ubi_wl_get_peb - get a physical eraseblock.
* @ubi: UBI device description object
*
* This function returns a physical eraseblock in case of success and a
* negative error code in case of failure.
* Returns with ubi->fm_eba_sem held in read mode!
*/
int ubi_wl_get_peb(struct ubi_device *ubi)
{
int ret, attempts = 0;
struct ubi_fm_pool *pool = &ubi->fm_pool;
struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
again:
down_read(&ubi->fm_eba_sem);
spin_lock(&ubi->wl_lock);
/* We check here also for the WL pool because at this point we can
* refill the WL pool synchronous. */
if (pool->used == pool->size || wl_pool->used == wl_pool->size) {
spin_unlock(&ubi->wl_lock);
up_read(&ubi->fm_eba_sem);
ret = ubi_update_fastmap(ubi);
if (ret) {
ubi_msg(ubi, "Unable to write a new fastmap: %i", ret);
down_read(&ubi->fm_eba_sem);
return -ENOSPC;
}
down_read(&ubi->fm_eba_sem);
spin_lock(&ubi->wl_lock);
}
if (pool->used == pool->size) {
spin_unlock(&ubi->wl_lock);
attempts++;
if (attempts == 10) {
ubi_err(ubi, "Unable to get a free PEB from user WL pool");
ret = -ENOSPC;
goto out;
}
up_read(&ubi->fm_eba_sem);
ret = produce_free_peb(ubi);
if (ret < 0) {
down_read(&ubi->fm_eba_sem);
goto out;
}
goto again;
}
ubi_assert(pool->used < pool->size);
ret = pool->pebs[pool->used++];
prot_queue_add(ubi, ubi->lookuptbl[ret]);
spin_unlock(&ubi->wl_lock);
out:
return ret;
}
/* get_peb_for_wl - returns a PEB to be used internally by the WL sub-system.
*
* @ubi: UBI device description object
*/
static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
{
struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
int pnum;
ubi_assert(rwsem_is_locked(&ubi->fm_eba_sem));
if (pool->used == pool->size) {
/* We cannot update the fastmap here because this
* function is called in atomic context.
* Let's fail here and refill/update it as soon as possible. */
if (!ubi->fm_work_scheduled) {
ubi->fm_work_scheduled = 1;
schedule_work(&ubi->fm_work);
}
return NULL;
}
pnum = pool->pebs[pool->used++];
return ubi->lookuptbl[pnum];
}
/**
* ubi_ensure_anchor_pebs - schedule wear-leveling to produce an anchor PEB.
* @ubi: UBI device description object
*/
int ubi_ensure_anchor_pebs(struct ubi_device *ubi)
{
struct ubi_work *wrk;
spin_lock(&ubi->wl_lock);
/* Do we have a next anchor? */
if (!ubi->fm_next_anchor) {
ubi->fm_next_anchor = ubi_wl_get_fm_peb(ubi, 1);
if (!ubi->fm_next_anchor)
/* Tell wear leveling to produce a new anchor PEB */
ubi->fm_do_produce_anchor = 1;
}
/* Do wear leveling to get a new anchor PEB or check the
* existing next anchor candidate.
*/
if (ubi->wl_scheduled) {
spin_unlock(&ubi->wl_lock);
return 0;
}
ubi->wl_scheduled = 1;
spin_unlock(&ubi->wl_lock);
wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
if (!wrk) {
spin_lock(&ubi->wl_lock);
ubi->wl_scheduled = 0;
spin_unlock(&ubi->wl_lock);
return -ENOMEM;
}
wrk->func = &wear_leveling_worker;
__schedule_ubi_work(ubi, wrk);
return 0;
}
/**
* ubi_wl_put_fm_peb - returns a PEB used in a fastmap to the wear-leveling
* sub-system.
* see: ubi_wl_put_peb()
*
* @ubi: UBI device description object
* @fm_e: physical eraseblock to return
* @lnum: the last used logical eraseblock number for the PEB
* @torture: if this physical eraseblock has to be tortured
*/
int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *fm_e,
int lnum, int torture)
{
struct ubi_wl_entry *e;
int vol_id, pnum = fm_e->pnum;
dbg_wl("PEB %d", pnum);
ubi_assert(pnum >= 0);
ubi_assert(pnum < ubi->peb_count);
spin_lock(&ubi->wl_lock);
e = ubi->lookuptbl[pnum];
/* This can happen if we recovered from a fastmap the very
* first time and writing now a new one. In this case the wl system
* has never seen any PEB used by the original fastmap.
*/
if (!e) {
e = fm_e;
ubi_assert(e->ec >= 0);
ubi->lookuptbl[pnum] = e;
}
spin_unlock(&ubi->wl_lock);
vol_id = lnum ? UBI_FM_DATA_VOLUME_ID : UBI_FM_SB_VOLUME_ID;
return schedule_erase(ubi, e, vol_id, lnum, torture, true);
}
/**
* ubi_is_erase_work - checks whether a work is erase work.
* @wrk: The work object to be checked
*/
int ubi_is_erase_work(struct ubi_work *wrk)
{
return wrk->func == erase_worker;
}
static void ubi_fastmap_close(struct ubi_device *ubi)
{
int i;
return_unused_pool_pebs(ubi, &ubi->fm_pool);
return_unused_pool_pebs(ubi, &ubi->fm_wl_pool);
if (ubi->fm_anchor) {
return_unused_peb(ubi, ubi->fm_anchor);
ubi->fm_anchor = NULL;
}
if (ubi->fm) {
for (i = 0; i < ubi->fm->used_blocks; i++)
kfree(ubi->fm->e[i]);
}
kfree(ubi->fm);
}
/**
* may_reserve_for_fm - tests whether a PEB shall be reserved for fastmap.
* See find_mean_wl_entry()
*
* @ubi: UBI device description object
* @e: physical eraseblock to return
* @root: RB tree to test against.
*/
static struct ubi_wl_entry *may_reserve_for_fm(struct ubi_device *ubi,
struct ubi_wl_entry *e,
struct rb_root *root) {
if (e && !ubi->fm_disabled && !ubi->fm &&
e->pnum < UBI_FM_MAX_START)
e = rb_entry(rb_next(root->rb_node),
struct ubi_wl_entry, u.rb);
return e;
}