mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-14 18:36:42 +07:00
5c73d9acd1
The SFF soldered onto the board expect the ports to use 1000BaseX. It makes no sense to have the ports set to SGMII, since they don't even support that mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
847 lines
15 KiB
Plaintext
847 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
//
|
|
// Copyright (C) 2016-2018 Zodiac Inflight Innovations
|
|
|
|
/dts-v1/;
|
|
#include "vf610.dtsi"
|
|
|
|
/ {
|
|
model = "ZII VF610 SCU4 AIB";
|
|
compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&pinctrl_leds_debug>;
|
|
pinctrl-names = "default";
|
|
|
|
debug {
|
|
label = "zii:green:debug1";
|
|
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
mdio-mux {
|
|
compatible = "mdio-mux-gpio";
|
|
pinctrl-0 = <&pinctrl_mdio_mux>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio4 4 GPIO_ACTIVE_HIGH
|
|
&gpio4 5 GPIO_ACTIVE_HIGH
|
|
&gpio3 30 GPIO_ACTIVE_HIGH
|
|
&gpio3 31 GPIO_ACTIVE_HIGH>;
|
|
mdio-parent-bus = <&mdio1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio_mux_1: mdio@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch0: switch0@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0>;
|
|
dsa,member = <0 0>;
|
|
eeprom-length = <65536>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "cpu";
|
|
ethernet = <&fec1>;
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "aib2main_1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "aib2main_2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "eth_cu_1000_5";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "eth_cu_1000_6";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "eth_cu_1000_4";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "eth_cu_1000_7";
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
label = "modem_pic";
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
switch0port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "xgmii";
|
|
link = <&switch1port10
|
|
&switch3port10
|
|
&switch2port10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio_mux_2: mdio@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch1: switch1@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0>;
|
|
dsa,member = <0 1>;
|
|
eeprom-length = <65536>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "eth_cu_1000_3";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "eth_cu_100_2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "eth_cu_100_3";
|
|
};
|
|
|
|
switch1port9: port@9 {
|
|
reg = <9>;
|
|
label = "dsa";
|
|
phy-mode = "xgmii";
|
|
link = <&switch3port10
|
|
&switch2port10>;
|
|
};
|
|
|
|
switch1port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "xgmii";
|
|
link = <&switch0port10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio_mux_4: mdio@4 {
|
|
reg = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch2: switch2@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0>;
|
|
dsa,member = <0 2>;
|
|
eeprom-length = <65536>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "eth_fc_1000_2";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff1>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "eth_fc_1000_3";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff2>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "eth_fc_1000_4";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff3>;
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "eth_fc_1000_5";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff4>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "eth_fc_1000_6";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff5>;
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
label = "eth_fc_1000_7";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff6>;
|
|
};
|
|
|
|
port@9 {
|
|
reg = <9>;
|
|
label = "eth_fc_1000_1";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff0>;
|
|
};
|
|
|
|
switch2port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "2500base-x";
|
|
link = <&switch3port9
|
|
&switch1port9
|
|
&switch0port10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio_mux_8: mdio@8 {
|
|
reg = <8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch3: switch3@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0>;
|
|
dsa,member = <0 3>;
|
|
eeprom-length = <65536>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "eth_fc_1000_8";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff7>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "eth_fc_1000_9";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff8>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "eth_fc_1000_10";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sff9>;
|
|
};
|
|
|
|
switch3port9: port@9 {
|
|
reg = <9>;
|
|
label = "dsa";
|
|
phy-mode = "2500base-x";
|
|
link = <&switch2port10>;
|
|
};
|
|
|
|
switch3port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "xgmii";
|
|
link = <&switch1port9
|
|
&switch0port10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sff0: sff0 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff0_i2c>;
|
|
los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff1: sff1 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff1_i2c>;
|
|
los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff2: sff2 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff2_i2c>;
|
|
los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff3: sff3 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff3_i2c>;
|
|
los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff4: sff4 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff4_i2c>;
|
|
los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff5: sff5 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff5_i2c>;
|
|
los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff6: sff6 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff6_i2c>;
|
|
los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff7: sff7 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff7_i2c>;
|
|
los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff8: sff8 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff8_i2c>;
|
|
los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff9: sff9 {
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff9_i2c>;
|
|
los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_mcu";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&dspi0 {
|
|
pinctrl-0 = <&pinctrl_dspi0>;
|
|
pinctrl-names = "default";
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
adc@5 {
|
|
compatible = "holt,hi8435";
|
|
reg = <5>;
|
|
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
|
|
spi-max-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
&dspi1 {
|
|
bus-num = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi1>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partition@0 {
|
|
label = "m25p128-0";
|
|
reg = <0x0 0x01000000>;
|
|
};
|
|
};
|
|
|
|
flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <1>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partition@0 {
|
|
label = "m25p128-1";
|
|
reg = <0x0 0x01000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc0 {
|
|
vref-supply = <®_vcc_3v3_mcu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_vcc_3v3_mcu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&edma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&edma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc0>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
no-1-8-v;
|
|
no-sd;
|
|
no-sdio;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec1 {
|
|
phy-mode = "rmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
|
|
mdio1: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
status = "okay";
|
|
|
|
gpio5: io-expander@20 {
|
|
compatible = "nxp,pca9554";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio6: io-expander@22 {
|
|
compatible = "nxp,pca9554";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
temp-sensor@48 {
|
|
compatible = "national,lm75";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c04";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
eeprom@52 {
|
|
compatible = "atmel,24c04";
|
|
reg = <0x52>;
|
|
};
|
|
|
|
elapsed-time-recorder@6b {
|
|
compatible = "dallas,ds1682";
|
|
reg = <0x6b>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
watchdog@38 {
|
|
compatible = "zii,rave-wdt";
|
|
reg = <0x38>;
|
|
};
|
|
|
|
adc@4a {
|
|
compatible = "adi,adt7411";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
gpio9: io-expander@20 {
|
|
compatible = "semtech,sx1503q";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sx1503_20>;
|
|
#gpio-cells = <2>;
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
temp-sensor@4e {
|
|
compatible = "national,lm75";
|
|
reg = <0x4e>;
|
|
};
|
|
|
|
temp-sensor@4f {
|
|
compatible = "national,lm75";
|
|
reg = <0x4f>;
|
|
};
|
|
|
|
gpio7: io-expander@23 {
|
|
compatible = "nxp,pca9555";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x23>;
|
|
};
|
|
|
|
adc@4a {
|
|
compatible = "adi,adt7411";
|
|
reg = <0x4a>;
|
|
};
|
|
|
|
eeprom@54 {
|
|
compatible = "atmel,24c08";
|
|
reg = <0x54>;
|
|
};
|
|
|
|
i2c-mux@70 {
|
|
compatible = "nxp,pca9548";
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x70>;
|
|
i2c-mux-idle-disconnect;
|
|
|
|
sff0_i2c: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
|
|
sff1_i2c: i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
};
|
|
|
|
sff2_i2c: i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
};
|
|
|
|
sff3_i2c: i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
};
|
|
|
|
sff4_i2c: i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
};
|
|
};
|
|
|
|
i2c-mux@71 {
|
|
compatible = "nxp,pca9548";
|
|
pinctrl-names = "default";
|
|
reg = <0x71>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
i2c-mux-idle-disconnect;
|
|
|
|
sff5_i2c: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
|
|
sff6_i2c: i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
};
|
|
|
|
sff7_i2c: i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
};
|
|
|
|
sff8_i2c: i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
};
|
|
|
|
sff9_i2c: i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&snvsrtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
linux,rs485-enabled-at-boot-time;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
linux,rs485-enabled-at-boot-time;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_dspi0: dspi0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB19__DSPI0_CS0 0x1182
|
|
VF610_PAD_PTB18__DSPI0_CS1 0x1182
|
|
VF610_PAD_PTB13__DSPI0_CS4 0x1182
|
|
VF610_PAD_PTB12__DSPI0_CS5 0x1182
|
|
VF610_PAD_PTB20__DSPI0_SIN 0x1181
|
|
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
|
|
VF610_PAD_PTB22__DSPI0_SCK 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi1: dspi1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD5__DSPI1_CS0 0x1182
|
|
VF610_PAD_PTD4__DSPI1_CS1 0x1182
|
|
VF610_PAD_PTC6__DSPI1_SIN 0x1181
|
|
VF610_PAD_PTC7__DSPI1_SOUT 0x1182
|
|
VF610_PAD_PTC8__DSPI1_SCK 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi2: dspi2gpio {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD30__GPIO_64 0x33e2
|
|
VF610_PAD_PTD29__GPIO_65 0x33e1
|
|
VF610_PAD_PTD28__GPIO_66 0x33e2
|
|
VF610_PAD_PTD27__GPIO_67 0x33e2
|
|
VF610_PAD_PTD26__GPIO_68 0x31c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc0: esdhc0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
|
|
VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
|
|
VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
|
|
VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
|
|
VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
|
|
VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
|
|
VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
|
|
VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
|
|
VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
|
|
VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
|
|
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
|
|
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
|
|
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
|
|
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
|
|
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
|
|
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
|
|
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
|
|
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
|
|
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
|
|
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
|
|
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
|
|
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
|
|
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
|
|
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c0: i2c0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB14__I2C0_SCL 0x37ff
|
|
VF610_PAD_PTB15__I2C0_SDA 0x37ff
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB16__I2C1_SCL 0x37ff
|
|
VF610_PAD_PTB17__I2C1_SDA 0x37ff
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA22__I2C2_SCL 0x37ff
|
|
VF610_PAD_PTA23__I2C2_SDA 0x37ff
|
|
>;
|
|
};
|
|
|
|
pinctrl_leds_debug: pinctrl-leds-debug {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB26__GPIO_96 0x31c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_mdio_mux: pinctrl-mdio-mux {
|
|
fsl,pins = <
|
|
VF610_PAD_PTE27__GPIO_132 0x31c2
|
|
VF610_PAD_PTE28__GPIO_133 0x31c2
|
|
VF610_PAD_PTE21__GPIO_126 0x31c2
|
|
VF610_PAD_PTE22__GPIO_127 0x31c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_qspi0: qspi0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
|
|
VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
|
|
VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
|
|
VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
|
|
VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
|
|
VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_sx1503_20: pinctrl-sx1503-20 {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD31__GPIO_63 0x219d
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart0: uart0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB10__UART0_TX 0x21a2
|
|
VF610_PAD_PTB11__UART0_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB23__UART1_TX 0x21a2
|
|
VF610_PAD_PTB24__UART1_RX 0x21a1
|
|
VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD0__UART2_TX 0x21a2
|
|
VF610_PAD_PTD1__UART2_RX 0x21a1
|
|
VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
|
|
>;
|
|
};
|
|
};
|