mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-14 18:26:47 +07:00
ecc1aebe34
The following dtc warning is seen when building with W=1:
arch/arm/boot/dts/imx6q-prtwd2.dts:33.8-43.4: Warning (unit_address_vs_reg): /i2c@4: node has a unit name, but no reg or ranges property
Remove the unneeded i2c unit name to fix the issue.
Fixes: 88010b8174 ("ARM: dts: add Protonic WD2 board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
189 lines
3.7 KiB
Plaintext
189 lines
3.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2018 Protonic Holland
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx6q.dtsi"
|
|
#include "imx6qdl-prti6q.dtsi"
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Protonic WD2 board";
|
|
compatible = "prt,prtwd2", "fsl,imx6q";
|
|
|
|
memory@10000000 {
|
|
device_type = "memory";
|
|
reg = <0x10000000 0x20000000>;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wifi_npd>;
|
|
reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
|
|
i2c {
|
|
compatible = "i2c-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
|
i2c-gpio,delay-us = <20>; /* ~10 kHz */
|
|
i2c-gpio,scl-output-only;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rmii";
|
|
clocks = <&clks IMX6QDL_CLK_ENET>,
|
|
<&clks IMX6QDL_CLK_ENET>;
|
|
clock-names = "ipg", "ahb";
|
|
status = "okay";
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
pause;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
adc@49 {
|
|
compatible = "ti,ads1015";
|
|
reg = <0x49>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* V in */
|
|
channel@4 {
|
|
reg = <4>;
|
|
ti,gain = <1>;
|
|
ti,datarate = <3>;
|
|
};
|
|
|
|
/* I charge */
|
|
channel@5 {
|
|
reg = <5>;
|
|
ti,gain = <1>;
|
|
ti,datarate = <3>;
|
|
};
|
|
|
|
/* V bus */
|
|
channel@6 {
|
|
reg = <6>;
|
|
ti,gain = <1>;
|
|
ti,datarate = <3>;
|
|
};
|
|
|
|
/* nc */
|
|
channel@7 {
|
|
reg = <7>;
|
|
ti,gain = <1>;
|
|
ti,datarate = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_eth_chg>;
|
|
|
|
pinctrl_can1phy: can1phy {
|
|
fsl,pins = <
|
|
/* CAN1_SR */
|
|
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
/* MX6QDL_ENET_PINGRP4 */
|
|
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
|
|
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
|
|
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x130b0
|
|
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
|
|
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
|
|
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
|
|
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
|
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
|
|
/* Phy reset */
|
|
MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
|
|
/* nINTRP */
|
|
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1f8b0
|
|
MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_eth_chg: usbethchggrp {
|
|
fsl,pins = <
|
|
/* USB charging control */
|
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0
|
|
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0
|
|
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_wifi_npd: wifinpd {
|
|
fsl,pins = <
|
|
/* WL_REG_ON */
|
|
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
|
|
>;
|
|
};
|
|
};
|