linux_dsm_epyc7002/arch/arm/boot/dts/am4372.dtsi
Linus Torvalds 2f3fbfdaf7 ARM: SoC DT changes for 5.9
As usual, there are many patches addressing minor issues in existing
 DTS files, such as DTC warnings, or adding support for additional
 peripherals.
 
 There are three added SoCs in existing product families:
 
  - Amazon:
     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and following
     the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips.
     This one is added together with the official Evaluation platform.
 
  - Qualcomm:
     The Snapdragon SDM630 platform is a family of mid-range mobile phone
     chips from 2017 based on Cortex-A53 or Kryo 260 CPUs.
     A total of five end-user products are added based on these, all
     Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and
     XA2 Ultra.
 
  - Renesas:
     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals.
     It is added along with the HopeRun HiHope RZ/G2H development board
 
 A small number of new boards for already supported SoCs also debut:
 
  - Allwinner sunxi:
     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.
 
  - Amlogic Meson:
     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
 
  - Aspeed:
     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.
 
  - Mediatek:
     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook
     based on the MT8183 (Helio P60t) SoC.
 
  - Nvidia Tegra:
     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels
     and become useful again.
 
     The Jetson Xavier NX Developer Kit uses a SoM and carrier board
     for the Tegra194, their latest 64-bit chip based on Carmel CPU
     cores and Volta graphics.
 
  - NXP i.MX:
     Five new boards based on the 32-bit i.MX6 series are added:
     The MYiR MYS-6ULX single-board computer, and four different
     models of industrial computers from Protonic.
 
  - Qualcomm:
     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC
     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony
     Xperia Z5.
 
  - Renesas:
     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards.
     Beacon EmbeddedWorks adds another SoM+Carrier development board
     for RZ/G2M.
 
  - Rockchips:
     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it
     is based on, using the high-end 32-bit rk3288 SoC.
 
 Notable updates to existing platforms are usually for added on-chip
 peripherals, including:
 
  - ASpeed AST2xxx (various)
 
  - Allwinner (cpufreq, thermal, Pinephone touchscreen)
 
  - Amlogic Meson (audio, gpu dvdfs, board updates)
 
  - Arm Versatile
 
  - Broadcom (board updates for switch ports, Raspberry pi clock updates)
 
  - Hisilicon (various)
 
  - Intel/Altera SoCFPGA (various)
 
  - Marvell Armada 7xxx/8xxx (smmu)
 
  - Marvell MMP (GPU on mmp2/mmp3)
 
  - Mediatek mt8183 (USB, pericfg)
 
  - NXP Layerscape (VPU, thermal, DSPI)
 
  - NXP i.MX (VPU, bindings, board updates)
 
  - Nvidia Tegra194 (GPU)
 
  - Qualcomm (GPU, Interconnect, ...)
 
  - Renesas R-Car (SPI, IPMMU, board updates)
 
  - STMicroelectronics STM32 (various)
 
  - Samsung Exynos (various)
 
  - Socionext Uniphier (updates to serial, and pcie)
 
  - TI K3 (serdes, usb3, audio, sd, chipid)
 
  - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl8j3zoACgkQmmx57+YA
 GNlOAQ//RuU0v5AyUyZZGsYKcKltg0qCiUj+CWldlaHS41oJQ9UC4e2kqhZtR28V
 Cqe853h976Xm74Fr7Hci4OCo9wxGrNLXFgNkNrYzR9ud76eEcSTQX8Jj9slZvLVu
 fEzNOK4VD0cIDRkw5xNZfGHGUSN7ttOV+NClVSA2zBiKv8jNivRI24+vvc+f92yb
 d5P7+aeex19xSOiMmuuj5yBbU+85pbR5aoRRS5Ohe5mVL5wW9LQTs7Otsk989FBe
 jOCthKfPFtxTTYMrWmM3P0DcHku/MNAsRQKUysrJlMcSefXOgkfMuN6cw4xypXAS
 OvFNnIp8cigt8MLWIyU2AiLkkr3FpEsZQliy4XTBl1n6mGlRHB5wD8i294cLtQlJ
 EO5yu3I3UimIyG7i4aWCy0sJMYedDrnoYisQk00aDbzea7quSuXC9yo9IompdBsr
 Fqn5D7tFnVs79v/2zDhqlMU8GmFSoqPyfPSE3dgLCOHlMdd2ToD9I4ahtsJVZTjk
 1Ro9TMFK+b5LIQot1inOPff0aurpZPLA7wmxUfez51IwG4UdVsmtawwPCl6OrgYm
 TttK+J1yuCMSxds7QC3rPfiubc+RLEy+IQxP1tR55THg72RDWRnwXTXb5AvAu/vx
 GbY1AzGszdr1+mR04CKbFyICG0l0vlyuX9qSsknRW48MaYgn8GQ=
 =Tpj3
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...
2020-08-03 19:19:34 -07:00

577 lines
14 KiB
Plaintext

/*
* Device Tree Source for AM4372 SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/bus/ti-sysc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/am4.h>
/ {
compatible = "ti,am4372", "ti,am43";
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
memory@0 {
device_type = "memory";
reg = <0 0>;
};
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
spi0 = &qspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0 {
compatible = "arm,cortex-a9";
enable-method = "ti,am4372";
device_type = "cpu";
reg = <0>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
clock-latency = <300000>; /* From omap-cpufreq driver */
cpu-idle-states = <&mpu_gate>;
};
idle-states {
mpu_gate: mpu_gate {
compatible = "arm,idle-state";
entry-latency-us = <40>;
exit-latency-us = <100>;
min-residency-us = <300>;
local-timer-stop;
};
};
};
cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
opp50-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000 931000 969000>;
opp-supported-hw = <0xFF 0x01>;
opp-suspend;
};
opp100-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0xFF 0x04>;
};
opp120-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0xFF 0x08>;
};
oppturbo-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0xFF 0x10>;
};
oppnitro-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1325000 1298500 1351500>;
opp-supported-hw = <0xFF 0x20>;
};
};
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap4-mpu";
ti,hwmods = "mpu";
pm-sram = <&pm_sram_code
&pm_sram_data>;
};
};
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};
scu: scu@48240000 {
compatible = "arm,cortex-a9-scu";
reg = <0x48240000 0x100>;
};
global_timer: timer@48240200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x48240200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
local_timer: timer@48240600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x48240600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
cache-controller@48242000 {
compatible = "arm,pl310-cache";
reg = <0x48242000 0x1000>;
cache-unified;
cache-level = <2>;
};
ocp@44000000 {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
ti,no-idle;
reg = <0x44000000 0x400000
0x44800000 0x400000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
l4_wkup: interconnect@44c00000 {
wkup_m3: wkup_m3@100000 {
compatible = "ti,am4372-wkup-m3";
reg = <0x100000 0x4000>,
<0x180000 0x2000>;
reg-names = "umem", "dmem";
ti,hwmods = "wkup_m3";
ti,pm-firmware = "am335x-pm-firmware.elf";
};
};
l4_per: interconnect@48000000 {
};
l4_fast: interconnect@4a000000 {
};
emif: emif@4c000000 {
compatible = "ti,emif-am4372";
reg = <0x4c000000 0x1000000>;
ti,hwmods = "emif";
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,no-idle;
sram = <&pm_sram_code
&pm_sram_data>;
};
target-module@49000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x49000000 0x4>;
reg-names = "rev";
clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x49000000 0x10000>;
edma: dma@0 {
compatible = "ti,edma3-tpcc";
reg = <0 0x10000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <58 59>;
};
};
target-module@49800000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x49800000 0x4>,
<0x49800010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
ti,sysc-midle = <SYSC_IDLE_FORCE>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_SMART>;
clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x49800000 0x100000>;
edma_tptc0: dma@0 {
compatible = "ti,edma3-tptc";
reg = <0 0x100000>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
};
target-module@49900000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x49900000 0x4>,
<0x49900010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
ti,sysc-midle = <SYSC_IDLE_FORCE>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_SMART>;
clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x49900000 0x100000>;
edma_tptc1: dma@0 {
compatible = "ti,edma3-tptc";
reg = <0 0x100000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
};
target-module@49a00000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x49a00000 0x4>,
<0x49a00010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
ti,sysc-midle = <SYSC_IDLE_FORCE>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_SMART>;
clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x49a00000 0x100000>;
edma_tptc2: dma@0 {
compatible = "ti,edma3-tptc";
reg = <0 0x100000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
};
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;
mmc3: mmc@0 {
compatible = "ti,am437-sdhci";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0x1000>;
status = "disabled";
};
};
sham_target: target-module@53100000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
reg = <0x53100100 0x4>,
<0x53100110 0x4>,
<0x53100114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
/* Domains (P, C): per_pwrdm, l3_clkdm */
clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x53100000 0x1000>;
sham: sham@0 {
compatible = "ti,omap5-sham";
reg = <0 0x300>;
dmas = <&edma 36 0>;
dma-names = "rx";
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
};
aes_target: target-module@53501000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x53501080 0x4>,
<0x53501084 0x4>,
<0x53501088 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
/* Domains (P, C): per_pwrdm, l3_clkdm */
clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x53501000 0x1000>;
aes: aes@0 {
compatible = "ti,omap4-aes";
reg = <0 0xa0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma 6 0>,
<&edma 5 0>;
dma-names = "tx", "rx";
};
};
des_target: target-module@53701000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x53701030 0x4>,
<0x53701034 0x4>,
<0x53701038 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
/* Domains (P, C): per_pwrdm, l3_clkdm */
clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x53701000 0x1000>;
des: des@0 {
compatible = "ti,omap4-des";
reg = <0 0xa0>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma 34 0>,
<&edma 33 0>;
dma-names = "tx", "rx";
};
};
pruss_tm: target-module@54400000 {
compatible = "ti,sysc-pruss", "ti,sysc";
reg = <0x54426000 0x4>,
<0x54426004 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
SYSC_PRUSS_SUB_MWAIT)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_per 1>;
reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x54400000 0x80000>;
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
dmas = <&edma 52 0>;
dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
reg = <0x50000000 0x2000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
target-module@47900000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x47900000 0x4>,
<0x47900010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47900000 0x1000>,
<0x30000000 0x30000000 0x4000000>;
qspi: spi@0 {
compatible = "ti,am4372-qspi";
reg = <0 0x100>,
<0x30000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
clocks = <&dpll_per_m2_div4_ck>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 138 0x4>;
num-cs = <4>;
};
};
ocmcram: sram@40300000 {
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
ranges = <0x0 0x40300000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
pm_sram_code: pm-code-sram@0 {
compatible = "ti,sram";
reg = <0x0 0x1000>;
protect-exec;
};
pm_sram_data: pm-data-sram@1000 {
compatible = "ti,sram";
reg = <0x1000 0x1000>;
pool;
};
};
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x1000000>;
};
};
};
#include "am437x-l4.dtsi"
#include "am43xx-clocks.dtsi"
&prcm {
prm_gfx: prm@400 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x400 0x100>;
#reset-cells = <1>;
};
prm_per: prm@800 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x800 0x100>;
#reset-cells = <1>;
};
prm_wkup: prm@2000 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x2000 0x100>;
#reset-cells = <1>;
};
prm_device: prm@4000 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x4000 0x100>;
#reset-cells = <1>;
};
};
/* Preferred always-on timer for clocksource */
&timer1_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
assigned-clocks = <&timer1_fck>;
assigned-clock-parents = <&sys_clkin_ck>;
};
};
/* Preferred timer for clockevent */
&timer2_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
assigned-clocks = <&timer2_fck>;
assigned-clock-parents = <&sys_clkin_ck>;
};
};