linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/omap_crtc.c
Jyri Sarha e8e13b1521 drm/omap: Major omap_modeset_init() cleanup
Cleanup overly complex omap_modeset_init(). The function is trying to
support many unusual configuration, that have never been tested and
are not supported by other parts of the dirver.

After cleanup the init function creates exactly one connector,
encoder, crtc, and primary plane per each connected dss-device. Each
connector->encoder->crtc chain is expected to be separate and each
crtc is connect to a single dss-channel. If the configuration does not
match the expectations or exceeds the available resources, the
configuration is rejected.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00

649 lines
17 KiB
C

/*
* drivers/gpu/drm/omapdrm/omap_crtc.c
*
* Copyright (C) 2011 Texas Instruments
* Author: Rob Clark <rob@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_mode.h>
#include <drm/drm_plane_helper.h>
#include "omap_drv.h"
#define to_omap_crtc(x) container_of(x, struct omap_crtc, base)
struct omap_crtc {
struct drm_crtc base;
const char *name;
enum omap_channel channel;
struct videomode vm;
bool ignore_digit_sync_lost;
bool enabled;
bool pending;
wait_queue_head_t pending_wait;
struct drm_pending_vblank_event *event;
};
/* -----------------------------------------------------------------------------
* Helper Functions
*/
struct videomode *omap_crtc_timings(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
return &omap_crtc->vm;
}
enum omap_channel omap_crtc_channel(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
return omap_crtc->channel;
}
static bool omap_crtc_is_pending(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
unsigned long flags;
bool pending;
spin_lock_irqsave(&crtc->dev->event_lock, flags);
pending = omap_crtc->pending;
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
return pending;
}
int omap_crtc_wait_pending(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
/*
* Timeout is set to a "sufficiently" high value, which should cover
* a single frame refresh even on slower displays.
*/
return wait_event_timeout(omap_crtc->pending_wait,
!omap_crtc_is_pending(crtc),
msecs_to_jiffies(250));
}
/* -----------------------------------------------------------------------------
* DSS Manager Functions
*/
/*
* Manager-ops, callbacks from output when they need to configure
* the upstream part of the video pipe.
*
* Most of these we can ignore until we add support for command-mode
* panels.. for video-mode the crtc-helpers already do an adequate
* job of sequencing the setup of the video pipe in the proper order
*/
/* ovl-mgr-id -> crtc */
static struct omap_crtc *omap_crtcs[8];
static struct omap_dss_device *omap_crtc_output[8];
/* we can probably ignore these until we support command-mode panels: */
static int omap_crtc_dss_connect(enum omap_channel channel,
struct omap_dss_device *dst)
{
const struct dispc_ops *dispc_ops = dispc_get_ops();
if (omap_crtc_output[channel])
return -EINVAL;
if ((dispc_ops->mgr_get_supported_outputs(channel) & dst->id) == 0)
return -EINVAL;
omap_crtc_output[channel] = dst;
dst->dispc_channel_connected = true;
return 0;
}
static void omap_crtc_dss_disconnect(enum omap_channel channel,
struct omap_dss_device *dst)
{
omap_crtc_output[channel] = NULL;
dst->dispc_channel_connected = false;
}
static void omap_crtc_dss_start_update(enum omap_channel channel)
{
}
/* Called only from the encoder enable/disable and suspend/resume handlers. */
static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
{
struct drm_device *dev = crtc->dev;
struct omap_drm_private *priv = dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
enum omap_channel channel = omap_crtc->channel;
struct omap_irq_wait *wait;
u32 framedone_irq, vsync_irq;
int ret;
if (WARN_ON(omap_crtc->enabled == enable))
return;
if (omap_crtc_output[channel]->output_type == OMAP_DISPLAY_TYPE_HDMI) {
priv->dispc_ops->mgr_enable(channel, enable);
omap_crtc->enabled = enable;
return;
}
if (omap_crtc->channel == OMAP_DSS_CHANNEL_DIGIT) {
/*
* Digit output produces some sync lost interrupts during the
* first frame when enabling, so we need to ignore those.
*/
omap_crtc->ignore_digit_sync_lost = true;
}
framedone_irq = priv->dispc_ops->mgr_get_framedone_irq(channel);
vsync_irq = priv->dispc_ops->mgr_get_vsync_irq(channel);
if (enable) {
wait = omap_irq_wait_init(dev, vsync_irq, 1);
} else {
/*
* When we disable the digit output, we need to wait for
* FRAMEDONE to know that DISPC has finished with the output.
*
* OMAP2/3 does not have FRAMEDONE irq for digit output, and in
* that case we need to use vsync interrupt, and wait for both
* even and odd frames.
*/
if (framedone_irq)
wait = omap_irq_wait_init(dev, framedone_irq, 1);
else
wait = omap_irq_wait_init(dev, vsync_irq, 2);
}
priv->dispc_ops->mgr_enable(channel, enable);
omap_crtc->enabled = enable;
ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100));
if (ret) {
dev_err(dev->dev, "%s: timeout waiting for %s\n",
omap_crtc->name, enable ? "enable" : "disable");
}
if (omap_crtc->channel == OMAP_DSS_CHANNEL_DIGIT) {
omap_crtc->ignore_digit_sync_lost = false;
/* make sure the irq handler sees the value above */
mb();
}
}
static int omap_crtc_dss_enable(enum omap_channel channel)
{
struct omap_crtc *omap_crtc = omap_crtcs[channel];
struct omap_drm_private *priv = omap_crtc->base.dev->dev_private;
priv->dispc_ops->mgr_set_timings(omap_crtc->channel, &omap_crtc->vm);
omap_crtc_set_enabled(&omap_crtc->base, true);
return 0;
}
static void omap_crtc_dss_disable(enum omap_channel channel)
{
struct omap_crtc *omap_crtc = omap_crtcs[channel];
omap_crtc_set_enabled(&omap_crtc->base, false);
}
static void omap_crtc_dss_set_timings(enum omap_channel channel,
const struct videomode *vm)
{
struct omap_crtc *omap_crtc = omap_crtcs[channel];
DBG("%s", omap_crtc->name);
omap_crtc->vm = *vm;
}
static void omap_crtc_dss_set_lcd_config(enum omap_channel channel,
const struct dss_lcd_mgr_config *config)
{
struct omap_crtc *omap_crtc = omap_crtcs[channel];
struct omap_drm_private *priv = omap_crtc->base.dev->dev_private;
DBG("%s", omap_crtc->name);
priv->dispc_ops->mgr_set_lcd_config(omap_crtc->channel, config);
}
static int omap_crtc_dss_register_framedone(
enum omap_channel channel,
void (*handler)(void *), void *data)
{
return 0;
}
static void omap_crtc_dss_unregister_framedone(
enum omap_channel channel,
void (*handler)(void *), void *data)
{
}
static const struct dss_mgr_ops mgr_ops = {
.connect = omap_crtc_dss_connect,
.disconnect = omap_crtc_dss_disconnect,
.start_update = omap_crtc_dss_start_update,
.enable = omap_crtc_dss_enable,
.disable = omap_crtc_dss_disable,
.set_timings = omap_crtc_dss_set_timings,
.set_lcd_config = omap_crtc_dss_set_lcd_config,
.register_framedone_handler = omap_crtc_dss_register_framedone,
.unregister_framedone_handler = omap_crtc_dss_unregister_framedone,
};
/* -----------------------------------------------------------------------------
* Setup, Flush and Page Flip
*/
void omap_crtc_error_irq(struct drm_crtc *crtc, uint32_t irqstatus)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
if (omap_crtc->ignore_digit_sync_lost) {
irqstatus &= ~DISPC_IRQ_SYNC_LOST_DIGIT;
if (!irqstatus)
return;
}
DRM_ERROR_RATELIMITED("%s: errors: %08x\n", omap_crtc->name, irqstatus);
}
void omap_crtc_vblank_irq(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct drm_device *dev = omap_crtc->base.dev;
struct omap_drm_private *priv = dev->dev_private;
bool pending;
spin_lock(&crtc->dev->event_lock);
/*
* If the dispc is busy we're racing the flush operation. Try again on
* the next vblank interrupt.
*/
if (priv->dispc_ops->mgr_go_busy(omap_crtc->channel)) {
spin_unlock(&crtc->dev->event_lock);
return;
}
/* Send the vblank event if one has been requested. */
if (omap_crtc->event) {
drm_crtc_send_vblank_event(crtc, omap_crtc->event);
omap_crtc->event = NULL;
}
pending = omap_crtc->pending;
omap_crtc->pending = false;
spin_unlock(&crtc->dev->event_lock);
if (pending)
drm_crtc_vblank_put(crtc);
/* Wake up omap_atomic_complete. */
wake_up(&omap_crtc->pending_wait);
DBG("%s: apply done", omap_crtc->name);
}
static void omap_crtc_write_crtc_properties(struct drm_crtc *crtc)
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct omap_overlay_manager_info info;
memset(&info, 0, sizeof(info));
info.default_color = 0x000000;
info.trans_enabled = false;
info.partial_alpha_enabled = false;
info.cpr_enable = false;
priv->dispc_ops->mgr_setup(omap_crtc->channel, &info);
}
/* -----------------------------------------------------------------------------
* CRTC Functions
*/
static void omap_crtc_destroy(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
DBG("%s", omap_crtc->name);
drm_crtc_cleanup(crtc);
kfree(omap_crtc);
}
static void omap_crtc_enable(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
int ret;
DBG("%s", omap_crtc->name);
spin_lock_irq(&crtc->dev->event_lock);
drm_crtc_vblank_on(crtc);
ret = drm_crtc_vblank_get(crtc);
WARN_ON(ret != 0);
WARN_ON(omap_crtc->pending);
omap_crtc->pending = true;
spin_unlock_irq(&crtc->dev->event_lock);
}
static void omap_crtc_disable(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
DBG("%s", omap_crtc->name);
drm_crtc_vblank_off(crtc);
}
static void omap_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct omap_drm_private *priv = crtc->dev->dev_private;
const u32 flags_mask = DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_DE_LOW |
DISPLAY_FLAGS_PIXDATA_POSEDGE | DISPLAY_FLAGS_PIXDATA_NEGEDGE |
DISPLAY_FLAGS_SYNC_POSEDGE | DISPLAY_FLAGS_SYNC_NEGEDGE;
unsigned int i;
DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
omap_crtc->name, mode->base.id, mode->name,
mode->vrefresh, mode->clock,
mode->hdisplay, mode->hsync_start, mode->hsync_end, mode->htotal,
mode->vdisplay, mode->vsync_start, mode->vsync_end, mode->vtotal,
mode->type, mode->flags);
drm_display_mode_to_videomode(mode, &omap_crtc->vm);
/*
* HACK: This fixes the vm flags.
* struct drm_display_mode does not contain the VSYNC/HSYNC/DE flags
* and they get lost when converting back and forth between
* struct drm_display_mode and struct videomode. The hack below
* goes and fetches the missing flags from the panel drivers.
*
* Correct solution would be to use DRM's bus-flags, but that's not
* easily possible before the omapdrm's panel/encoder driver model
* has been changed to the DRM model.
*/
for (i = 0; i < priv->num_encoders; ++i) {
struct drm_encoder *encoder = priv->encoders[i];
if (encoder->crtc == crtc) {
struct omap_dss_device *dssdev;
dssdev = omap_encoder_get_dssdev(encoder);
if (dssdev) {
struct videomode vm = {0};
dssdev->driver->get_timings(dssdev, &vm);
omap_crtc->vm.flags |= vm.flags & flags_mask;
}
break;
}
}
}
static int omap_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
if (state->color_mgmt_changed && state->gamma_lut) {
uint length = state->gamma_lut->length /
sizeof(struct drm_color_lut);
if (length < 2)
return -EINVAL;
}
return 0;
}
static void omap_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
}
static void omap_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
int ret;
if (crtc->state->color_mgmt_changed) {
struct drm_color_lut *lut = NULL;
uint length = 0;
if (crtc->state->gamma_lut) {
lut = (struct drm_color_lut *)
crtc->state->gamma_lut->data;
length = crtc->state->gamma_lut->length /
sizeof(*lut);
}
priv->dispc_ops->mgr_set_gamma(omap_crtc->channel, lut, length);
}
omap_crtc_write_crtc_properties(crtc);
/* Only flush the CRTC if it is currently enabled. */
if (!omap_crtc->enabled)
return;
DBG("%s: GO", omap_crtc->name);
ret = drm_crtc_vblank_get(crtc);
WARN_ON(ret != 0);
spin_lock_irq(&crtc->dev->event_lock);
priv->dispc_ops->mgr_go(omap_crtc->channel);
WARN_ON(omap_crtc->pending);
omap_crtc->pending = true;
if (crtc->state->event)
omap_crtc->event = crtc->state->event;
spin_unlock_irq(&crtc->dev->event_lock);
}
static bool omap_crtc_is_plane_prop(struct drm_crtc *crtc,
struct drm_property *property)
{
struct drm_device *dev = crtc->dev;
struct omap_drm_private *priv = dev->dev_private;
return property == priv->zorder_prop ||
property == crtc->primary->rotation_property;
}
static int omap_crtc_atomic_set_property(struct drm_crtc *crtc,
struct drm_crtc_state *state,
struct drm_property *property,
uint64_t val)
{
if (omap_crtc_is_plane_prop(crtc, property)) {
struct drm_plane_state *plane_state;
struct drm_plane *plane = crtc->primary;
/*
* Delegate property set to the primary plane. Get the plane
* state and set the property directly.
*/
plane_state = drm_atomic_get_plane_state(state->state, plane);
if (IS_ERR(plane_state))
return PTR_ERR(plane_state);
return drm_atomic_plane_set_property(plane, plane_state,
property, val);
}
return -EINVAL;
}
static int omap_crtc_atomic_get_property(struct drm_crtc *crtc,
const struct drm_crtc_state *state,
struct drm_property *property,
uint64_t *val)
{
if (omap_crtc_is_plane_prop(crtc, property)) {
/*
* Delegate property get to the primary plane. The
* drm_atomic_plane_get_property() function isn't exported, but
* can be called through drm_object_property_get_value() as that
* will call drm_atomic_get_property() for atomic drivers.
*/
return drm_object_property_get_value(&crtc->primary->base,
property, val);
}
return -EINVAL;
}
static const struct drm_crtc_funcs omap_crtc_funcs = {
.reset = drm_atomic_helper_crtc_reset,
.set_config = drm_atomic_helper_set_config,
.destroy = omap_crtc_destroy,
.page_flip = drm_atomic_helper_page_flip,
.gamma_set = drm_atomic_helper_legacy_gamma_set,
.set_property = drm_atomic_helper_crtc_set_property,
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
.atomic_set_property = omap_crtc_atomic_set_property,
.atomic_get_property = omap_crtc_atomic_get_property,
.enable_vblank = omap_irq_enable_vblank,
.disable_vblank = omap_irq_disable_vblank,
};
static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
.mode_set_nofb = omap_crtc_mode_set_nofb,
.disable = omap_crtc_disable,
.enable = omap_crtc_enable,
.atomic_check = omap_crtc_atomic_check,
.atomic_begin = omap_crtc_atomic_begin,
.atomic_flush = omap_crtc_atomic_flush,
};
/* -----------------------------------------------------------------------------
* Init and Cleanup
*/
static const char *channel_names[] = {
[OMAP_DSS_CHANNEL_LCD] = "lcd",
[OMAP_DSS_CHANNEL_DIGIT] = "tv",
[OMAP_DSS_CHANNEL_LCD2] = "lcd2",
[OMAP_DSS_CHANNEL_LCD3] = "lcd3",
};
void omap_crtc_pre_init(void)
{
memset(omap_crtcs, 0, sizeof(omap_crtcs));
dss_install_mgr_ops(&mgr_ops);
}
void omap_crtc_pre_uninit(void)
{
dss_uninstall_mgr_ops();
}
/* initialize crtc */
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
struct drm_plane *plane, struct omap_dss_device *dssdev)
{
struct omap_drm_private *priv = dev->dev_private;
struct drm_crtc *crtc = NULL;
struct omap_crtc *omap_crtc;
enum omap_channel channel;
struct omap_dss_device *out;
int ret;
out = omapdss_find_output_from_display(dssdev);
channel = out->dispc_channel;
omap_dss_put_device(out);
DBG("%s", channel_names[channel]);
/* Multiple displays on same channel is not allowed */
if (WARN_ON(omap_crtcs[channel] != NULL))
return ERR_PTR(-EINVAL);
omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL);
if (!omap_crtc)
return ERR_PTR(-ENOMEM);
crtc = &omap_crtc->base;
init_waitqueue_head(&omap_crtc->pending_wait);
omap_crtc->channel = channel;
omap_crtc->name = channel_names[channel];
ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
&omap_crtc_funcs, NULL);
if (ret < 0) {
dev_err(dev->dev, "%s(): could not init crtc for: %s\n",
__func__, dssdev->name);
kfree(omap_crtc);
return ERR_PTR(ret);
}
drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
/* The dispc API adapts to what ever size, but the HW supports
* 256 element gamma table for LCDs and 1024 element table for
* OMAP_DSS_CHANNEL_DIGIT. X server assumes 256 element gamma
* tables so lets use that. Size of HW gamma table can be
* extracted with dispc_mgr_gamma_size(). If it returns 0
* gamma table is not supprted.
*/
if (priv->dispc_ops->mgr_gamma_size(channel)) {
uint gamma_lut_size = 256;
drm_crtc_enable_color_mgmt(crtc, 0, false, gamma_lut_size);
drm_mode_crtc_set_gamma_size(crtc, gamma_lut_size);
}
omap_plane_install_properties(crtc->primary, &crtc->base);
omap_crtcs[channel] = omap_crtc;
return crtc;
}