mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 02:18:18 +07:00
afc3bca4cf
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>
42 lines
1.0 KiB
Plaintext
42 lines
1.0 KiB
Plaintext
Imagination Technologies SPDIF Input Controller
|
|
|
|
Required Properties:
|
|
|
|
- compatible : Compatible list, must contain "img,spdif-in"
|
|
|
|
- #sound-dai-cells : Must be equal to 0
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
|
|
- dmas: Contains an entry for each entry in dma-names.
|
|
|
|
- dma-names: Must include the following entry:
|
|
"rx"
|
|
|
|
- clocks : Contains an entry for each entry in clock-names
|
|
|
|
- clock-names : Includes the following entries:
|
|
"sys" The system clock
|
|
|
|
Optional Properties:
|
|
|
|
- resets: Should contain a phandle to the spdif in reset signal, if any
|
|
|
|
- reset-names: Should contain the reset signal name "rst", if a
|
|
reset phandle is given
|
|
|
|
- interrupts : Contains the spdif in interrupt, if present
|
|
|
|
Example:
|
|
|
|
spdif_in: spdif-in@18100e00 {
|
|
compatible = "img,spdif-in";
|
|
reg = <0x18100E00 0x100>;
|
|
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdc 15 0xffffffff 0>;
|
|
dma-names = "rx";
|
|
clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
|
|
clock-names = "sys";
|
|
#sound-dai-cells = <0>;
|
|
};
|