mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 03:56:42 +07:00
4811f53fad
Two new PHY drivers coming here: one for Samsung, one for OMAP. Both architectures are adding USB3 support to mainline kernel. The PHY layer now allows us to have mulitple PHYs of the same type, which is necessary for platforms which provide more than one USB peripheral port. There's also a few cleanups here: removal of __dev* annotations, conversion of a cast to to_delayed_work(), and mxs-phy learns about ->set_suspend. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJRAqlWAAoJEIaOsuA1yqREo+0P/AnevihQnUfh1WlICZeHvQMR +XwSZGVlZYMTiThFldDOsV0ZpngMWW7y7iNc/YjCTyYr1skRjdYahRAc9YZtz2aR 2aIdIbdt6gS4wthPhMUGdeGlGuXngmrFCKeo7xD8RQQgeJecGqrD/y629fAfnq0Z /bCOq+BKj3R9oLOVKtBCOE+j4KQKJSDkywz4GRaZ5yyOmn55Ci/FNJH6EAoGQC5Q D1j+PyhlVpqW/XESn9ceRdXIG9i4a9b3PwKFNbO3iCfaLh5JGTW67pTZ+A7+XNcz iT3+WibsZIAF6ya/Eu/1NcBgj8an6rhuRN/Nu7GTIOxwZNuKbqpYfuOXf1/StTiJ rwmPQ4mh3PzqbLSfe4+H3SIkj8IZCh6NuPiREAwge2HGxOSY7FSIdQSGV6jOqa7F 7Qi3K9aFMqJYAkhEelPfNtZZhK1fVlQTn+t/q4Zr7r593xpV1Ur73Kn3EwGDBcM3 5hyKo9DC1Gr1KXtf1B/hzojnMWqmT5BxJhFBSsw7Nj1F0fUaA3G15+vkanvUSWRV /wP8pjZD44T/bguion7LSdscX98S4fCTJSf571UYymmVGKejfpYI0wRWearVbrhm cwdONVyIt0EFqX2gd2pthx2SBTTOEetb5ssqSKXRBCTDiApjdAPdejVGk3iblw7C LOydELt71ER/o2RNVR+h =c796 -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: xceiv: patches for v3.9 merge window Two new PHY drivers coming here: one for Samsung, one for OMAP. Both architectures are adding USB3 support to mainline kernel. The PHY layer now allows us to have mulitple PHYs of the same type, which is necessary for platforms which provide more than one USB peripheral port. There's also a few cleanups here: removal of __dev* annotations, conversion of a cast to to_delayed_work(), and mxs-phy learns about ->set_suspend.
681 lines
17 KiB
C
681 lines
17 KiB
C
/*
|
|
* Copyright (C) 2005-2007 by Texas Instruments
|
|
* Some code has been taken from tusb6010.c
|
|
* Copyrights for that are attributable to:
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* The Inventra Controller Driver for Linux is free software; you
|
|
* can redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License version 2 as published by the Free Software
|
|
* Foundation.
|
|
*
|
|
* The Inventra Controller Driver for Linux is distributed in
|
|
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
* License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with The Inventra Controller Driver for Linux ; if not,
|
|
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
|
* Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/musb-omap.h>
|
|
#include <linux/usb/omap_control_usb.h>
|
|
|
|
#include "musb_core.h"
|
|
#include "omap2430.h"
|
|
|
|
struct omap2430_glue {
|
|
struct device *dev;
|
|
struct platform_device *musb;
|
|
enum omap_musb_vbus_id_status status;
|
|
struct work_struct omap_musb_mailbox_work;
|
|
struct device *control_otghs;
|
|
};
|
|
#define glue_to_musb(g) platform_get_drvdata(g->musb)
|
|
|
|
struct omap2430_glue *_glue;
|
|
|
|
static struct timer_list musb_idle_timer;
|
|
|
|
static void musb_do_idle(unsigned long _musb)
|
|
{
|
|
struct musb *musb = (void *)_musb;
|
|
unsigned long flags;
|
|
u8 power;
|
|
u8 devctl;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
switch (musb->xceiv->state) {
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
break;
|
|
case OTG_STATE_A_SUSPEND:
|
|
/* finish RESUME signaling? */
|
|
if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
|
|
power = musb_readb(musb->mregs, MUSB_POWER);
|
|
power &= ~MUSB_POWER_RESUME;
|
|
dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
|
|
musb_writeb(musb->mregs, MUSB_POWER, power);
|
|
musb->is_active = 1;
|
|
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
|
|
| MUSB_PORT_STAT_RESUME);
|
|
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
|
|
usb_hcd_poll_rh_status(musb_to_hcd(musb));
|
|
/* NOTE: it might really be A_WAIT_BCON ... */
|
|
musb->xceiv->state = OTG_STATE_A_HOST;
|
|
}
|
|
break;
|
|
case OTG_STATE_A_HOST:
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE)
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
else
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
}
|
|
|
|
|
|
static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
|
|
{
|
|
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
|
|
static unsigned long last_timer;
|
|
|
|
if (timeout == 0)
|
|
timeout = default_timeout;
|
|
|
|
/* Never idle if active, or when VBUS timeout is not set as host */
|
|
if (musb->is_active || ((musb->a_wait_bcon == 0)
|
|
&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
|
|
dev_dbg(musb->controller, "%s active, deleting timer\n",
|
|
otg_state_string(musb->xceiv->state));
|
|
del_timer(&musb_idle_timer);
|
|
last_timer = jiffies;
|
|
return;
|
|
}
|
|
|
|
if (time_after(last_timer, timeout)) {
|
|
if (!timer_pending(&musb_idle_timer))
|
|
last_timer = timeout;
|
|
else {
|
|
dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
|
|
return;
|
|
}
|
|
}
|
|
last_timer = timeout;
|
|
|
|
dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
|
|
otg_state_string(musb->xceiv->state),
|
|
(unsigned long)jiffies_to_msecs(timeout - jiffies));
|
|
mod_timer(&musb_idle_timer, timeout);
|
|
}
|
|
|
|
static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
|
|
{
|
|
struct usb_otg *otg = musb->xceiv->otg;
|
|
u8 devctl;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
/* HDRC controls CPEN, but beware current surges during device
|
|
* connect. They can trigger transient overcurrent conditions
|
|
* that must be ignored.
|
|
*/
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
if (is_on) {
|
|
if (musb->xceiv->state == OTG_STATE_A_IDLE) {
|
|
int loops = 100;
|
|
/* start the session */
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
/*
|
|
* Wait for the musb to set as A device to enable the
|
|
* VBUS
|
|
*/
|
|
while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
|
|
|
|
mdelay(5);
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)
|
|
|| loops-- <= 0) {
|
|
dev_err(musb->controller,
|
|
"configured as A device timeout");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (otg->set_vbus)
|
|
otg_set_vbus(otg, 1);
|
|
} else {
|
|
musb->is_active = 1;
|
|
otg->default_a = 1;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
} else {
|
|
musb->is_active = 0;
|
|
|
|
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
|
|
* jumping right to B_IDLE...
|
|
*/
|
|
|
|
otg->default_a = 0;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
|
|
MUSB_DEV_MODE(musb);
|
|
}
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
dev_dbg(musb->controller, "VBUS %s, devctl %02x "
|
|
/* otg %3x conf %08x prcm %08x */ "\n",
|
|
otg_state_string(musb->xceiv->state),
|
|
musb_readb(musb->mregs, MUSB_DEVCTL));
|
|
}
|
|
|
|
static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
|
|
{
|
|
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void omap2430_low_level_exit(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
/* in any role */
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l |= ENABLEFORCE; /* enable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
}
|
|
|
|
static inline void omap2430_low_level_init(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l &= ~ENABLEFORCE; /* disable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
}
|
|
|
|
void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
|
|
{
|
|
struct omap2430_glue *glue = _glue;
|
|
|
|
if (glue && glue_to_musb(glue)) {
|
|
glue->status = status;
|
|
} else {
|
|
pr_err("%s: musb core is not yet ready\n", __func__);
|
|
return;
|
|
}
|
|
|
|
schedule_work(&glue->omap_musb_mailbox_work);
|
|
}
|
|
EXPORT_SYMBOL_GPL(omap_musb_mailbox);
|
|
|
|
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
|
|
{
|
|
struct musb *musb = glue_to_musb(glue);
|
|
struct device *dev = musb->controller;
|
|
struct musb_hdrc_platform_data *pdata = dev->platform_data;
|
|
struct omap_musb_board_data *data = pdata->board_data;
|
|
struct usb_otg *otg = musb->xceiv->otg;
|
|
|
|
switch (glue->status) {
|
|
case OMAP_MUSB_ID_GROUND:
|
|
dev_dbg(dev, "ID GND\n");
|
|
|
|
otg->default_a = true;
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
musb->xceiv->last_event = USB_EVENT_ID;
|
|
if (musb->gadget_driver) {
|
|
pm_runtime_get_sync(dev);
|
|
omap_control_usb_set_mode(glue->control_otghs,
|
|
USB_MODE_HOST);
|
|
omap2430_musb_set_vbus(musb, 1);
|
|
}
|
|
break;
|
|
|
|
case OMAP_MUSB_VBUS_VALID:
|
|
dev_dbg(dev, "VBUS Connect\n");
|
|
|
|
otg->default_a = false;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
musb->xceiv->last_event = USB_EVENT_VBUS;
|
|
if (musb->gadget_driver)
|
|
pm_runtime_get_sync(dev);
|
|
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
|
|
break;
|
|
|
|
case OMAP_MUSB_ID_FLOAT:
|
|
case OMAP_MUSB_VBUS_OFF:
|
|
dev_dbg(dev, "VBUS Disconnect\n");
|
|
|
|
musb->xceiv->last_event = USB_EVENT_NONE;
|
|
if (musb->gadget_driver) {
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
}
|
|
|
|
if (data->interface_type == MUSB_INTERFACE_UTMI) {
|
|
if (musb->xceiv->otg->set_vbus)
|
|
otg_set_vbus(musb->xceiv->otg, 0);
|
|
}
|
|
omap_control_usb_set_mode(glue->control_otghs,
|
|
USB_MODE_DISCONNECT);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "ID float\n");
|
|
}
|
|
}
|
|
|
|
|
|
static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
|
|
{
|
|
struct omap2430_glue *glue = container_of(mailbox_work,
|
|
struct omap2430_glue, omap_musb_mailbox_work);
|
|
omap_musb_set_mailbox(glue);
|
|
}
|
|
|
|
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
|
|
{
|
|
unsigned long flags;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
struct musb *musb = __hci;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
|
|
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
|
|
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
|
|
|
|
if (musb->int_usb || musb->int_tx || musb->int_rx)
|
|
retval = musb_interrupt(musb);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int omap2430_musb_init(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
int status = 0;
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
|
|
/* We require some kind of external transceiver, hooked
|
|
* up through ULPI. TWL4030-family PMICs include one,
|
|
* which needs a driver, drivers aren't always needed.
|
|
*/
|
|
if (dev->parent->of_node)
|
|
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
|
|
"usb-phy", 0);
|
|
else
|
|
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
|
|
|
|
if (IS_ERR_OR_NULL(musb->xceiv)) {
|
|
pr_err("HS USB OTG: no transceiver configured\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
musb->isr = omap2430_musb_interrupt;
|
|
|
|
status = pm_runtime_get_sync(dev);
|
|
if (status < 0) {
|
|
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
|
|
goto err1;
|
|
}
|
|
|
|
l = musb_readl(musb->mregs, OTG_INTERFSEL);
|
|
|
|
if (data->interface_type == MUSB_INTERFACE_UTMI) {
|
|
/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
|
|
l &= ~ULPI_12PIN; /* Disable ULPI */
|
|
l |= UTMI_8BIT; /* Enable UTMI */
|
|
} else {
|
|
l |= ULPI_12PIN;
|
|
}
|
|
|
|
musb_writel(musb->mregs, OTG_INTERFSEL, l);
|
|
|
|
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
|
|
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
|
|
musb_readl(musb->mregs, OTG_REVISION),
|
|
musb_readl(musb->mregs, OTG_SYSCONFIG),
|
|
musb_readl(musb->mregs, OTG_SYSSTATUS),
|
|
musb_readl(musb->mregs, OTG_INTERFSEL),
|
|
musb_readl(musb->mregs, OTG_SIMENABLE));
|
|
|
|
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
|
|
|
|
if (glue->status != OMAP_MUSB_UNKNOWN)
|
|
omap_musb_set_mailbox(glue);
|
|
|
|
pm_runtime_put_noidle(musb->controller);
|
|
return 0;
|
|
|
|
err1:
|
|
return status;
|
|
}
|
|
|
|
static void omap2430_musb_enable(struct musb *musb)
|
|
{
|
|
u8 devctl;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
struct musb_hdrc_platform_data *pdata = dev->platform_data;
|
|
struct omap_musb_board_data *data = pdata->board_data;
|
|
|
|
switch (glue->status) {
|
|
|
|
case OMAP_MUSB_ID_GROUND:
|
|
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
|
|
if (data->interface_type != MUSB_INTERFACE_UTMI)
|
|
break;
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
/* start the session */
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
while (musb_readb(musb->mregs, MUSB_DEVCTL) &
|
|
MUSB_DEVCTL_BDEVICE) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(dev, "configured as A device timeout");
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case OMAP_MUSB_VBUS_VALID:
|
|
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void omap2430_musb_disable(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
|
|
|
|
if (glue->status != OMAP_MUSB_UNKNOWN)
|
|
omap_control_usb_set_mode(glue->control_otghs,
|
|
USB_MODE_DISCONNECT);
|
|
}
|
|
|
|
static int omap2430_musb_exit(struct musb *musb)
|
|
{
|
|
del_timer_sync(&musb_idle_timer);
|
|
|
|
omap2430_low_level_exit(musb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops omap2430_ops = {
|
|
.init = omap2430_musb_init,
|
|
.exit = omap2430_musb_exit,
|
|
|
|
.set_mode = omap2430_musb_set_mode,
|
|
.try_idle = omap2430_musb_try_idle,
|
|
|
|
.set_vbus = omap2430_musb_set_vbus,
|
|
|
|
.enable = omap2430_musb_enable,
|
|
.disable = omap2430_musb_disable,
|
|
};
|
|
|
|
static u64 omap2430_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static int omap2430_probe(struct platform_device *pdev)
|
|
{
|
|
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
|
|
struct omap_musb_board_data *data;
|
|
struct platform_device *musb;
|
|
struct omap2430_glue *glue;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct musb_hdrc_config *config;
|
|
int ret = -ENOMEM;
|
|
|
|
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue) {
|
|
dev_err(&pdev->dev, "failed to allocate glue context\n");
|
|
goto err0;
|
|
}
|
|
|
|
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
|
|
if (!musb) {
|
|
dev_err(&pdev->dev, "failed to allocate musb device\n");
|
|
goto err0;
|
|
}
|
|
|
|
musb->dev.parent = &pdev->dev;
|
|
musb->dev.dma_mask = &omap2430_dmamask;
|
|
musb->dev.coherent_dma_mask = omap2430_dmamask;
|
|
|
|
glue->dev = &pdev->dev;
|
|
glue->musb = musb;
|
|
glue->status = OMAP_MUSB_UNKNOWN;
|
|
|
|
if (np) {
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev,
|
|
"failed to allocate musb platfrom data\n");
|
|
goto err2;
|
|
}
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(&pdev->dev,
|
|
"failed to allocate musb board data\n");
|
|
goto err2;
|
|
}
|
|
|
|
config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
|
|
if (!config) {
|
|
dev_err(&pdev->dev,
|
|
"failed to allocate musb hdrc config\n");
|
|
goto err2;
|
|
}
|
|
|
|
of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
|
|
of_property_read_u32(np, "interface_type",
|
|
(u32 *)&data->interface_type);
|
|
of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);
|
|
of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
|
|
of_property_read_u32(np, "power", (u32 *)&pdata->power);
|
|
config->multipoint = of_property_read_bool(np, "multipoint");
|
|
pdata->has_mailbox = of_property_read_bool(np,
|
|
"ti,has-mailbox");
|
|
|
|
pdata->board_data = data;
|
|
pdata->config = config;
|
|
}
|
|
|
|
if (pdata->has_mailbox) {
|
|
glue->control_otghs = omap_get_control_dev();
|
|
if (IS_ERR(glue->control_otghs)) {
|
|
dev_vdbg(&pdev->dev, "Failed to get control device\n");
|
|
return -ENODEV;
|
|
}
|
|
} else {
|
|
glue->control_otghs = ERR_PTR(-ENODEV);
|
|
}
|
|
pdata->platform_ops = &omap2430_ops;
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
/*
|
|
* REVISIT if we ever have two instances of the wrapper, we will be
|
|
* in big trouble
|
|
*/
|
|
_glue = glue;
|
|
|
|
INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
|
|
|
|
ret = platform_device_add_resources(musb, pdev->resource,
|
|
pdev->num_resources);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add resources\n");
|
|
goto err2;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add platform_data\n");
|
|
goto err2;
|
|
}
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register musb device\n");
|
|
goto err2;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
platform_device_put(musb);
|
|
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static int omap2430_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap2430_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
cancel_work_sync(&glue->omap_musb_mailbox_work);
|
|
platform_device_unregister(glue->musb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int omap2430_runtime_suspend(struct device *dev)
|
|
{
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev);
|
|
struct musb *musb = glue_to_musb(glue);
|
|
|
|
if (musb) {
|
|
musb->context.otg_interfsel = musb_readl(musb->mregs,
|
|
OTG_INTERFSEL);
|
|
|
|
omap2430_low_level_exit(musb);
|
|
usb_phy_set_suspend(musb->xceiv, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2430_runtime_resume(struct device *dev)
|
|
{
|
|
struct omap2430_glue *glue = dev_get_drvdata(dev);
|
|
struct musb *musb = glue_to_musb(glue);
|
|
|
|
if (musb) {
|
|
omap2430_low_level_init(musb);
|
|
musb_writel(musb->mregs, OTG_INTERFSEL,
|
|
musb->context.otg_interfsel);
|
|
|
|
usb_phy_set_suspend(musb->xceiv, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops omap2430_pm_ops = {
|
|
.runtime_suspend = omap2430_runtime_suspend,
|
|
.runtime_resume = omap2430_runtime_resume,
|
|
};
|
|
|
|
#define DEV_PM_OPS (&omap2430_pm_ops)
|
|
#else
|
|
#define DEV_PM_OPS NULL
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id omap2430_id_table[] = {
|
|
{
|
|
.compatible = "ti,omap4-musb"
|
|
},
|
|
{
|
|
.compatible = "ti,omap3-musb"
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap2430_id_table);
|
|
#endif
|
|
|
|
static struct platform_driver omap2430_driver = {
|
|
.probe = omap2430_probe,
|
|
.remove = omap2430_remove,
|
|
.driver = {
|
|
.name = "musb-omap2430",
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(omap2430_id_table),
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
|
|
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
static int __init omap2430_init(void)
|
|
{
|
|
return platform_driver_register(&omap2430_driver);
|
|
}
|
|
subsys_initcall(omap2430_init);
|
|
|
|
static void __exit omap2430_exit(void)
|
|
{
|
|
platform_driver_unregister(&omap2430_driver);
|
|
}
|
|
module_exit(omap2430_exit);
|