mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 02:07:01 +07:00
88302648be
The RCTRL and TCTRL registers should not be changed on-the-fly, while the controller is running, otherwise unexpected behaviour occurs. But that's exactly what gfar_vlan_mode() does, updating the VLAN acceleration bits inside RCTRL/TCTRL. The attempt to lock these operations doesn't help, but only adds to the confusion. There's also a dependency for Rx FCB insertion (activating /de-activating the TOE offload block on Rx) which might change the required rx buffer size. This makes matters worse as gfar_vlan_mode() ends up calling gfar_change_mtu(), though the MTU size remains the same. Note that there are other situations that may affect the required rx buffer size, like changing RXCSUM or rx hw timestamping, but errorneously the rx buffer size is not recomputed/ updated in the process. To fix this, do the vlan updates properly inside the MAC reset and reconfiguration procedure, which takes care of the rx buffer size dependecy and the rx TOE block (PRSDEP) activation/deactivation as well (in the correct order). As a consequence, MTU/ rx buff size updates are done now by the same MAC reset and reconfig procedure, so that out of context updates to MAXFRM, MRBLR, and MACCFG inside change_mtu() are no longer needed. The rx buffer size dependecy to Rx FCB is now handled for the other cases too (RXCSUM and rx hw timestamping). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| fs_enet | ||
| fec_main.c | ||
| fec_mpc52xx_phy.c | ||
| fec_mpc52xx.c | ||
| fec_mpc52xx.h | ||
| fec_ptp.c | ||
| fec.h | ||
| fsl_pq_mdio.c | ||
| gianfar_ethtool.c | ||
| gianfar_ptp.c | ||
| gianfar.c | ||
| gianfar.h | ||
| Kconfig | ||
| Makefile | ||
| ucc_geth_ethtool.c | ||
| ucc_geth.c | ||
| ucc_geth.h | ||
| xgmac_mdio.c | ||