mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 01:56:42 +07:00
ba5810ab0c
The edp-24m clock has two possible sources: the 24MHz oscillator as well as an external 27MHz input. The power-on-default is the 27MHz clock which is not supplied on all Rockchip boards. While on all current boards and also all Veyron Chromebooks the bootloader seems to adapt the muxing to the internal source, this doesn't seem to be the case on headless veyron devices like brain and mickey making the edp-24m clock an orphan. On the hardware side the 27m input also is not connected at all. With the upcoming deferral of orphan-clocks this results in the power- domain code deferring, as it cannot request the needed clock and if the synchronous reset is sucessfullat all in this case is also unknown. So fix that by making sure, the edp-24m clock is muxed to the internal 24MHz oscillator at all times. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
564 lines
13 KiB
Plaintext
564 lines
13 KiB
Plaintext
/*
|
|
* Google Veyron (and derivatives) board device tree source
|
|
*
|
|
* Copyright 2015 Google, Inc
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/rockchip,rk808.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3288.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x80000000>;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_key_l>;
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
debounce-interval = <100>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_warm_reset_h>;
|
|
priority = <200>;
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
pinctrl-0 = <&emmc_reset>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
io_domains: io-domains {
|
|
compatible = "rockchip,rk3288-io-voltage-domain";
|
|
rockchip,grf = <&grf>;
|
|
|
|
bb-supply = <&vcc33_io>;
|
|
dvp-supply = <&vcc_18>;
|
|
flash0-supply = <&vcc18_flashio>;
|
|
gpio1830-supply = <&vcc33_io>;
|
|
gpio30-supply = <&vcc33_io>;
|
|
lcdc-supply = <&vcc33_lcd>;
|
|
wifi-supply = <&vcc18_wl>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 RK808_CLKOUT1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc_5v: vcc-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc33_sys: vcc33-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc33_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc50_hdmi: vcc50-hdmi {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc50_hdmi";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&emmc {
|
|
status = "okay";
|
|
|
|
broken-cd;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
rockchip,default-sample-phase = <158>;
|
|
disable-wp;
|
|
mmc-hs200-1_8v;
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c5>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
i2c-scl-rising-time-ns = <100>; /* 45ns measured */
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
reg = <0x1b>;
|
|
clock-output-names = "xin32k", "wifibt_32kin";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
|
|
vcc1-supply = <&vcc33_sys>;
|
|
vcc2-supply = <&vcc33_sys>;
|
|
vcc3-supply = <&vcc33_sys>;
|
|
vcc4-supply = <&vcc33_sys>;
|
|
vcc6-supply = <&vcc_5v>;
|
|
vcc7-supply = <&vcc33_sys>;
|
|
vcc8-supply = <&vcc33_sys>;
|
|
vcc12-supply = <&vcc_18>;
|
|
vddio-supply = <&vcc33_io>;
|
|
|
|
regulators {
|
|
vdd_cpu: DCDC_REG1 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc135_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc135_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* vcc_18 has several aliases. (vcc18_flashio and
|
|
* vcc18_wl). We'll add those aliases here just to
|
|
* make it easier to follow the schematic. The signals
|
|
* are actually hooked together and only separated for
|
|
* power measurement purposes).
|
|
*/
|
|
vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
|
|
regulator-name = "vcc_18";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Note that both vcc33_io and vcc33_pmuio are always
|
|
* powered together. To simplify the logic in the dts
|
|
* we just refer to vcc33_io every time something is
|
|
* powered from vcc33_pmuio. In fact, on later boards
|
|
* (such as danger) they're the same net.
|
|
*/
|
|
vcc33_io: LDO_REG1 {
|
|
regulator-name = "vcc33_io";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-name = "vdd_10";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vdd10_lcd_pwren_h: LDO_REG7 {
|
|
regulator-name = "vdd10_lcd_pwren_h";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc33_lcd: SWITCH_REG1 {
|
|
regulator-name = "vcc33_lcd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
i2c-scl-rising-time-ns = <100>; /* 40ns measured */
|
|
|
|
tpm: tpm@20 {
|
|
compatible = "infineon,slb9645tt";
|
|
reg = <0x20>;
|
|
powered-while-suspended;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
/* 100kHz since 4.7k resistors don't rise fast enough */
|
|
clock-frequency = <100000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 10ns measured */
|
|
i2c-scl-rising-time-ns = <800>; /* 600ns measured */
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 11ns measured */
|
|
i2c-scl-rising-time-ns = <300>; /* 225ns measured */
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <100000>;
|
|
i2c-scl-falling-time-ns = <300>;
|
|
i2c-scl-rising-time-ns = <1000>;
|
|
};
|
|
|
|
&power {
|
|
assigned-clocks = <&cru SCLK_EDP_24M>;
|
|
assigned-clock-parents = <&xin24m>;
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
status = "okay";
|
|
|
|
broken-cd;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc33_sys>;
|
|
vqmmc-supply = <&vcc18_wl>;
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
|
|
rx-sample-delay-ns = <12>;
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
|
|
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
|
|
/* We need to go faster than 24MHz, so adjust clock parents / rates */
|
|
assigned-clocks = <&cru SCLK_UART0>;
|
|
assigned-clock-rates = <48000000>;
|
|
|
|
/* Pins don't include flow control by default; add that in */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
|
|
needs-reset-on-resume;
|
|
};
|
|
|
|
&usb_host1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "okay";
|
|
|
|
assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
|
|
assigned-clock-parents = <&cru SCLK_OTGPHY0>;
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&global_pwroff
|
|
>;
|
|
pinctrl-1 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&global_pwroff
|
|
>;
|
|
|
|
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
|
bias-disable;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
|
bias-pull-up;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
buttons {
|
|
pwr_key_l: pwr-key-l {
|
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
emmc_reset: emmc-reset {
|
|
rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/*
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
reboot {
|
|
ap_warm_reset_h: ap-warm-reset-h {
|
|
rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
recovery-switch {
|
|
rec_mode_l: rec-mode-l {
|
|
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdio0 {
|
|
wifi_enable_h: wifienable-h {
|
|
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* NOTE: mislabelled on schematic; should be bt_enable_h */
|
|
bt_enable_l: bt-enable-l {
|
|
rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/*
|
|
* We run sdio0 at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
sdio0_bus4: sdio0-bus4 {
|
|
rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdio0_cmd: sdio0-cmd {
|
|
rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdio0_clk: sdio0-clk {
|
|
rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
};
|
|
|
|
tpm {
|
|
tpm_int_h: tpm-int-h {
|
|
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
write-protect {
|
|
fw_wp_ap: fw-wp-ap {
|
|
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|