mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
2e0b80ce45
This patch adds documentation of device tree bindings for the STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
117 lines
3.6 KiB
Plaintext
117 lines
3.6 KiB
Plaintext
STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
|
|
|
|
ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
|
|
Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
|
|
|
|
Required properties:
|
|
- compatible: should be "st,stmfx-0300-pinctrl".
|
|
- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
|
|
cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
|
|
- gpio-controller: marks the device as a GPIO controller.
|
|
- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
|
|
second cell is the interrupt flags in accordance with
|
|
<dt-bindings/interrupt-controller/irq.h>.
|
|
- interrupt-controller: marks the device as an interrupt controller.
|
|
- gpio-ranges: specifies the mapping between gpio controller and pin
|
|
controller pins. Check "Concerning gpio-ranges property" below.
|
|
Please refer to ../gpio/gpio.txt.
|
|
|
|
Please refer to pinctrl-bindings.txt for pin configuration.
|
|
|
|
Required properties for pin configuration sub-nodes:
|
|
- pins: list of pins to which the configuration applies.
|
|
|
|
Optional properties for pin configuration sub-nodes (pinconf-generic ones):
|
|
- bias-disable: disable any bias on the pin.
|
|
- bias-pull-up: the pin will be pulled up.
|
|
- bias-pull-pin-default: use the pin-default pull state.
|
|
- bias-pull-down: the pin will be pulled down.
|
|
- drive-open-drain: the pin will be driven with open drain.
|
|
- drive-push-pull: the pin will be driven actively high and low.
|
|
- output-high: the pin will be configured as an output driving high level.
|
|
- output-low: the pin will be configured as an output driving low level.
|
|
|
|
Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
|
|
called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
|
|
|
|
Concerning gpio-ranges property:
|
|
- if all STMFX pins[24:0] are available (no other STMFX function in use), you
|
|
should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
|
|
- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
|
|
should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
|
|
- if agpio[7:4] are not available (STMFX IDD function in use), you
|
|
should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
|
|
|
|
|
|
Example:
|
|
|
|
stmfx: stmfx@42 {
|
|
...
|
|
|
|
stmfx_pinctrl: stmfx-pin-controller {
|
|
compatible = "st,stmfx-0300-pinctrl";
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
gpio-ranges = <&stmfx_pinctrl 0 0 24>;
|
|
|
|
joystick_pins: joystick {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
|
|
drive-push-pull;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example of STMFX GPIO consumers:
|
|
|
|
joystick {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&joystick_pins>;
|
|
pinctrl-names = "default";
|
|
button-0 {
|
|
label = "JoySel";
|
|
linux,code = <KEY_ENTER>;
|
|
interrupt-parent = <&stmfx_pinctrl>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
button-1 {
|
|
label = "JoyDown";
|
|
linux,code = <KEY_DOWN>;
|
|
interrupt-parent = <&stmfx_pinctrl>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
button-2 {
|
|
label = "JoyLeft";
|
|
linux,code = <KEY_LEFT>;
|
|
interrupt-parent = <&stmfx_pinctrl>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
button-3 {
|
|
label = "JoyRight";
|
|
linux,code = <KEY_RIGHT>;
|
|
interrupt-parent = <&stmfx_pinctrl>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
button-4 {
|
|
label = "JoyUp";
|
|
linux,code = <KEY_UP>;
|
|
interrupt-parent = <&stmfx_pinctrl>;
|
|
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
orange {
|
|
gpios = <&stmfx_pinctrl 17 1>;
|
|
};
|
|
|
|
blue {
|
|
gpios = <&stmfx_pinctrl 19 1>;
|
|
};
|
|
}
|