Benjamin Herrenschmidt 880a3d6afd powerpc/xics: Properly set Edge/Level type and enable resend ... This sets the type of the interrupt appropriately. We set it as follow: - If not mapped from the device-tree, we use edge. This is the case of the virtual interrupts and PCI MSIs for example. - If mapped from the device-tree and #interrupt-cells is 2 (PAPR compliant), we use the second cell to set the appropriate type - If mapped from the device-tree and #interrupt-cells is 1 (current OPAL on P8 does that), we assume level sensitive since those are typically going to be the PSI LSIs which are level sensitive. Additionally, we mark the interrupts requested via the opal_interrupts property all level. This is a bit fishy but the best we can do until we fix OPAL to properly expose them with a complete descriptor. It is also correct for the current HW anyway as OPAL interrupts are currently PCI error and PSI interrupts which are level. Finally now that edge interrupts are properly identified, we can enable CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if they occur while masked, which some drivers rely upon. This fixes issues with lost interrupts on some Mellanox adapters. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>		2016-08-09 14:50:18 +10:00
..
asm	powerpc/xics: Properly set Edge/Level type and enable resend	2016-08-09 14:50:18 +10:00
uapi/asm	powerpc/ptrace: Enable support for Performance Monitor registers	2016-08-01 11:15:24 +10:00