mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 19:35:07 +07:00
da7920e31d
- New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1
variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
Vining-2000 board.
- Use the 'vpcie-supply' property for PCIe device for boards
imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
- A series from Jagan Teki to update imx6qdl-icore board with audio,
touch and CAN support.
- Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
tempmon support for i.MX6UL.
- A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
and i.MX6 TX modules.
- Fix DTC warnings in i.MX device trees, dropping leading zeros from
unit address, correcting display nodes notation and display port
names, fixing nodes with unit name and no reg property.
- Other random device updates for various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ7ypUAAoJEFBXWFqHsHzOpVkH/RsZ3IMg8O5tMO6uz1CNmutR
3EAXfBeQTnQZe2A/3XkDRpJWGiIniRSVAf6rYipmeyV9jV2Ff4vfiv5gnhg1ev+B
eV35W3gb3EclHKrHgHVMkfzWfNp63L1etdVFrY0QuMc0wQbch0TwO3TTPHpk0+AS
eauLOMY1qzRVnayzZ8IeTn++igsoj4KT1NmIprNKe66eDAOfWxO0IB26r0svKrhg
mIlqTUG1p6I/H8h6hQZuRJaLM9no3dHDcm7Scbf1y8Mvf5mPVTTHKXGLLyEVT/UB
SEWydfAt0VEAEA+Uk6pFJsrG1KRx0hwF46DHk2BXj7A1wxBsUIPnMSoMRWgGrZE=
=grKK
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.15" from Shawn Guo:
- New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1
variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
Vining-2000 board.
- Use the 'vpcie-supply' property for PCIe device for boards
imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
- A series from Jagan Teki to update imx6qdl-icore board with audio,
touch and CAN support.
- Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
tempmon support for i.MX6UL.
- A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
and i.MX6 TX modules.
- Fix DTC warnings in i.MX device trees, dropping leading zeros from
unit address, correcting display nodes notation and display port
names, fixing nodes with unit name and no reg property.
- Other random device updates for various board support.
* tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
ARM: dts: imx53-tx53: fix interrupt flags
ARM: dts: imx28-tx28: fix interrupt flags
ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
ARM: dts: imx: add ZII RDU1 board
ARM: dts: imx: add support for TX6 modules on MB7 baseboard
ARM: dts: imx: add support for TX6QP
ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
ARM: dts: imx6-tx6: move display configuration to .dtsi file
ARM: dts: imx6-tx6: add support for I2C bus recovery
ARM: dts: imx6-tx6: convert to using simple-audio-card
ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
ARM: dts: imx6-tx6: add trickle-charge config for DS1339
ARM: dts: imx6-tx6: remove obsolete ipu1 alias
ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
...
[arnd: made sure we have no new leading zeroes in unit address during merge]
698 lines
16 KiB
Plaintext
698 lines
16 KiB
Plaintext
/*
|
|
* Copyright 2013 Boundary Devices, Inc.
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x10000000 0x40000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_2p5v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "2P5V";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_otg_vbus: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_can_xcvr: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
regulator-name = "CAN XCVR";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can_xcvr>;
|
|
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reg_wlan_vmmc: regulator@4 {
|
|
compatible = "regulator-fixed";
|
|
reg = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wlan_vmmc>;
|
|
regulator-name = "reg_wlan_vmmc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_h1_vbus: regulator@5 {
|
|
compatible = "regulator-fixed";
|
|
reg = <5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1>;
|
|
regulator-name = "usb_h1_vbus";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
menu {
|
|
label = "Menu";
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_MENU>;
|
|
};
|
|
|
|
home {
|
|
label = "Home";
|
|
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOME>;
|
|
};
|
|
|
|
back {
|
|
label = "Back";
|
|
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_BACK>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx6q-nitrogen6x-sgtl5000";
|
|
ssi-controller = <&ssi1>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <1>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
|
|
backlight_lcd: backlight-lcd {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
backlight_lvds: backlight-lvds {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm4 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
lcd_display: disp0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interface-pix-fmt = "bgr666";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_j15>;
|
|
status = "okay";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
lcd_display_in: endpoint {
|
|
remote-endpoint = <&ipu1_di0_disp0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
lcd_display_out: endpoint {
|
|
remote-endpoint = <&lcd_panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel-lcd {
|
|
compatible = "okaya,rs800480t-7x0gp";
|
|
backlight = <&backlight_lcd>;
|
|
|
|
port {
|
|
lcd_panel_in: endpoint {
|
|
remote-endpoint = <&lcd_display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel-lvds0 {
|
|
compatible = "hannstar,hsd100pxn1";
|
|
backlight = <&backlight_lvds>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1>;
|
|
xceiver-supply = <®_can_xcvr>;
|
|
status = "okay";
|
|
};
|
|
|
|
&clks {
|
|
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
|
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
|
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
|
};
|
|
|
|
&ecspi1 {
|
|
cs-gpios = <&gpio3 19 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
status = "okay";
|
|
|
|
flash: m25p80@0 {
|
|
compatible = "sst,sst25vf016b", "jedec,spi-nor";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii";
|
|
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
|
txen-skew-ps = <0>;
|
|
txc-skew-ps = <3000>;
|
|
rxdv-skew-ps = <0>;
|
|
rxc-skew-ps = <3000>;
|
|
rxd0-skew-ps = <0>;
|
|
rxd1-skew-ps = <0>;
|
|
rxd2-skew-ps = <0>;
|
|
rxd3-skew-ps = <0>;
|
|
txd0-skew-ps = <0>;
|
|
txd1-skew-ps = <0>;
|
|
txd2-skew-ps = <0>;
|
|
txd3-skew-ps = <0>;
|
|
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,err006687-workaround-present;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
codec: sgtl5000@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clks IMX6QDL_CLK_CKO>;
|
|
VDDA-supply = <®_2p5v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
|
|
rtc: rtc@6f {
|
|
compatible = "isil,isl1208";
|
|
reg = <0x6f>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
touchscreen@4 {
|
|
compatible = "eeti,egalax_ts";
|
|
reg = <0x04>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
touchscreen@38 {
|
|
compatible = "edt,edt-ft5x06";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx6q-nitrogen6x {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
/* SGTL5000 sys_mclk */
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
|
|
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
|
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_can1: can1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
|
|
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_can_xcvr: can-xcvrgrp {
|
|
fsl,pins = <
|
|
/* Flexcan XCVR enable */
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
/* Phy reset */
|
|
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0
|
|
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpio-keysgrp {
|
|
fsl,pins = <
|
|
/* Power Button */
|
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
|
/* Menu Button */
|
|
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
|
|
/* Home Button */
|
|
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
|
/* Back Button */
|
|
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
|
/* Volume Up Button */
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
|
/* Volume Down Button */
|
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_j15: j15grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
|
|
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
|
|
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
|
|
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
|
|
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
|
|
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
|
|
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
|
|
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
|
|
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
|
|
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
|
|
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
|
|
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
|
|
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
|
|
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
|
|
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
|
|
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
|
|
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
|
|
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
|
|
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
|
|
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
|
|
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
|
|
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
|
|
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
|
|
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
|
|
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
|
|
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
|
|
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
|
|
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1: usbh1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
|
|
/* power enable, high active */
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
|
|
>;
|
|
};
|
|
|
|
pinctrl_wlan_vmmc: wlan-vmmcgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
|
|
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
|
|
MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ipu1_di0_disp0 {
|
|
remote-endpoint = <&lcd_display_in>;
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds-channel@0 {
|
|
status = "okay";
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
lvds0_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
vmmc-supply = <®_wlan_vmmc>;
|
|
cap-power-off-card;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1271";
|
|
reg = <2>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
|
|
ref-clock-frequency = <38400000>;
|
|
};
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|