mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-02-11 06:25:13 +07:00
e045f044e8
usdhc's clock rate is different according to different devices connected, so clock rate assignment should be placed in board DT according to different devices connected on each usdhc port. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
818 lines
18 KiB
Plaintext
818 lines
18 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018-2019 Purism SPC
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "dt-bindings/input/input.h"
|
|
#include "dt-bindings/pwm/pwm.h"
|
|
#include "dt-bindings/usb/pd.h"
|
|
#include "imx8mq.dtsi"
|
|
|
|
/ {
|
|
model = "Purism Librem 5 devkit";
|
|
compatible = "purism,librem5-devkit", "fsl,imx8mq";
|
|
|
|
backlight_dsi: backlight-dsi {
|
|
compatible = "pwm-backlight";
|
|
/* 200 Hz for the PAM2841 */
|
|
pwms = <&pwm1 0 5000000>;
|
|
brightness-levels = <0 100>;
|
|
num-interpolated-steps = <100>;
|
|
/* Default brightness level (index into the array defined by */
|
|
/* the "brightness-levels" property) */
|
|
default-brightness-level = <0>;
|
|
power-supply = <®_22v4_p>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
btn1 {
|
|
label = "VOL_UP";
|
|
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
btn2 {
|
|
label = "VOL_DOWN";
|
|
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
hp-det {
|
|
label = "HP_DET";
|
|
gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
linux,code = <KEY_HP>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
led1 {
|
|
label = "LED 1";
|
|
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
pmic_osc: clock-pmic {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "pmic_osc";
|
|
};
|
|
|
|
reg_1v8_p: regulator-1v8-p {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "1v8_p";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <®_pwr_en>;
|
|
};
|
|
|
|
reg_2v8_p: regulator-2v8-p {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "2v8_p";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
vin-supply = <®_pwr_en>;
|
|
};
|
|
|
|
reg_3v3_p: regulator-3v3-p {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3v3_p";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_pwr_en>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
reg_5v_p: regulator-5v-p {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5v_p";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_pwr_en>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
reg_22v4_p: regulator-22v4-p {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "22v4_P";
|
|
regulator-min-microvolt = <22400000>;
|
|
regulator-max-microvolt = <22400000>;
|
|
vin-supply = <®_pwr_en>;
|
|
};
|
|
|
|
reg_pwr_en: regulator-pwr-en {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwr_en>;
|
|
regulator-name = "PWR_EN";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2_pwr>;
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vibrator {
|
|
compatible = "gpio-vibrator";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_haptic>;
|
|
enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
|
|
vcc-supply = <®_3v3_p>;
|
|
};
|
|
|
|
wifi_pwr_en: regulator-wifi-en {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wifi_pwr_en>;
|
|
regulator-name = "WIFI_EN";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&clk {
|
|
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
|
|
assigned-clock-rates = <786432000>, <722534400>;
|
|
};
|
|
|
|
&dphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðphy0>;
|
|
fsl,magic-packet;
|
|
phy-supply = <®_3v3_p>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pmic@4b {
|
|
compatible = "rohm,bd71837";
|
|
reg = <0x4b>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
clocks = <&pmic_osc>;
|
|
clock-names = "osc";
|
|
clock-output-names = "pmic_clk";
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <3 GPIO_ACTIVE_LOW>;
|
|
interrupt-names = "irq";
|
|
rohm,reset-snvs-powered;
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "buck1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <900000>;
|
|
rohm,dvs-idle-voltage = <850000>;
|
|
rohm,dvs-suspend-voltage = <800000>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "buck2";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
rohm,dvs-idle-voltage = <900000>;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "buck3";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "buck4";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "buck5";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "buck6";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "buck7";
|
|
regulator-min-microvolt = <1605000>;
|
|
regulator-max-microvolt = <1995000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "buck8";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
/* leave on for snvs power button */
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
/* leave on for snvs power button */
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "ldo6";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "ldo7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
typec_ptn5100: usb_typec@52 {
|
|
compatible = "nxp,ptn5110";
|
|
reg = <0x52>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_typec>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 2000,
|
|
PDO_FIXED_USB_COMM |
|
|
PDO_FIXED_DUAL_ROLE |
|
|
PDO_FIXED_DATA_SWAP )>;
|
|
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
|
|
PDO_FIXED_DUAL_ROLE |
|
|
PDO_FIXED_DATA_SWAP )
|
|
PDO_VAR(5000, 3000, 3000)>;
|
|
op-sink-microwatt = <10000000>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
usb_con_hs: endpoint {
|
|
remote-endpoint = <&typec_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
usb_con_ss: endpoint {
|
|
remote-endpoint = <&typec_ss>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "microcrystal,rv4162";
|
|
reg = <0x68>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rtc>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
charger@6b { /* bq25896 */
|
|
compatible = "ti,bq25890";
|
|
reg = <0x6b>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_charger>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
ti,battery-regulation-voltage = <4192000>; /* 4.192V */
|
|
ti,charge-current = <1600000>; /* 1.6A */
|
|
ti,termination-current = <66000>; /* 66mA */
|
|
ti,precharge-current = <130000>; /* 130mA */
|
|
ti,minimum-sys-voltage = <3000000>; /* 3V */
|
|
ti,boost-voltage = <5000000>; /* 5V */
|
|
ti,boost-max-current = <50000>; /* 50mA */
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
magnetometer@1e {
|
|
compatible = "st,lsm9ds1-magn";
|
|
reg = <0x1e>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_imu>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
vdd-supply = <®_3v3_p>;
|
|
vddio-supply = <®_3v3_p>;
|
|
};
|
|
|
|
touchscreen@5d {
|
|
compatible = "goodix,gt5688";
|
|
reg = <0x5d>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ts>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
|
|
touchscreen-size-x = <720>;
|
|
touchscreen-size-y = <1440>;
|
|
AVDD28-supply = <®_2v8_p>;
|
|
VDDIO-supply = <®_1v8_p>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_bl: blgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */
|
|
>;
|
|
};
|
|
|
|
pinctrl_bt: btgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */
|
|
MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */
|
|
>;
|
|
};
|
|
|
|
pinctrl_charger: chargergrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
|
MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
|
MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
|
MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
|
MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
|
MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
|
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
|
MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
|
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
|
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
|
MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
|
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
|
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
|
MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
|
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
|
|
MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f
|
|
>;
|
|
};
|
|
|
|
pinctrl_ts: tsgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */
|
|
MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_leds: gpioledgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpiokeygrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
|
|
MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
|
|
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */
|
|
>;
|
|
};
|
|
|
|
pinctrl_haptic: hapticgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f
|
|
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f
|
|
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f
|
|
>;
|
|
};
|
|
|
|
pinctrl_imu: imugrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwr_en: pwrengrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06
|
|
>;
|
|
};
|
|
|
|
pinctrl_rtc: rtcgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */
|
|
>;
|
|
};
|
|
|
|
pinctrl_typec: typecgrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
|
|
MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
|
|
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
|
|
MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
|
|
MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49
|
|
MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
|
|
MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49
|
|
MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49
|
|
MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49
|
|
MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49
|
|
MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
|
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
|
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
|
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
|
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
|
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
|
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
|
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
|
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
|
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
|
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
|
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
|
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_pwr: usdhc2grppwr {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: usdhc2grpgpio {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
|
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
|
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
|
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
|
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
|
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
|
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
|
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
|
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
|
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
|
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
|
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
|
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
|
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
|
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
|
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
|
>;
|
|
};
|
|
|
|
pinctrl_wifi_pwr_en: wifipwrengrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06
|
|
>;
|
|
};
|
|
|
|
pinctrl_wwan: wwangrp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */
|
|
MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */
|
|
MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pgc_gpu {
|
|
power-supply = <&buck3_reg>;
|
|
};
|
|
|
|
&pgc_vpu {
|
|
power-supply = <&buck4_reg>;
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_bl>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 { /* console */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 { /* GNSS */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 { /* BT */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_phy1 {
|
|
vbus-supply = <®_5v_p>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dwc3_0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
typec_hs: endpoint {
|
|
remote-endpoint = <&usb_con_hs>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
typec_ss: endpoint {
|
|
remote-endpoint = <&usb_con_ss>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_dwc3_1 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
|
|
assigned-clock-rates = <400000000>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
power-supply = <&wifi_pwr_en>;
|
|
non-removable;
|
|
disable-wp;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|