mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 08:27:01 +07:00
02b4e2756e
All ARMv5 and older CPUs invalidate their caches in the early assembly setup function, prior to enabling the MMU. This is because the L1 cache should not contain any data relevant to the execution of the kernel at this point; all data should have been flushed out to memory. This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, these typically do not search their caches when caching is disabled (as it needs to be when the MMU is disabled) so this change should be safe. ARMv7 allows there to be CPUs which search their caches while caching is disabled, and it's permitted that the cache is uninitialised at boot; for these, the architecture reference manual requires that an implementation specific code sequence is used immediately after reset to ensure that the cache is placed into a sane state. Such functionality is definitely outside the remit of the Linux kernel, and must be done by the SoC's firmware before _any_ CPU gets to the Linux kernel. Changing the data cache clean+invalidate to a mere invalidate allows us to get rid of a lot of platform specific hacks around this issue for their secondary CPU bringup paths - some of which were buggy. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
38 lines
974 B
ArmAsm
38 lines
974 B
ArmAsm
/*
|
|
* Entry of the second core for CSR Marco dual-core SMP SoCs
|
|
*
|
|
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
|
|
/*
|
|
* SIRFSOC specific entry point for secondary CPUs. This provides
|
|
* a "holding pen" into which all secondary cores are held until we're
|
|
* ready for them to initialise.
|
|
*/
|
|
ENTRY(sirfsoc_secondary_startup)
|
|
mrc p15, 0, r0, c0, c0, 5
|
|
and r0, r0, #15
|
|
adr r4, 1f
|
|
ldmia r4, {r5, r6}
|
|
sub r4, r4, r5
|
|
add r6, r6, r4
|
|
pen: ldr r7, [r6]
|
|
cmp r7, r0
|
|
bne pen
|
|
|
|
/*
|
|
* we've been released from the holding pen: secondary_stack
|
|
* should now contain the SVC stack for this core
|
|
*/
|
|
b secondary_startup
|
|
ENDPROC(sirfsoc_secondary_startup)
|
|
|
|
.align
|
|
1: .long .
|
|
.long pen_release
|