mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 02:15:23 +07:00
97a0b97f9e
Once the ST frontend demux HW IP has been enabled, the clock can't be disabled otherwise the system will hang and the board will be unserviceable. To allow balanced clock enable/disable calls in the driver we use the critical clock infrastructure to take an extra reference on the clock so the clock will never actually be disabled. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com>
349 lines
7.7 KiB
Plaintext
349 lines
7.7 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 STMicroelectronics R&D Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <dt-bindings/clock/stih410-clks.h>
|
|
/ {
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
compatible = "st,stih410-clk", "simple-bus";
|
|
|
|
/*
|
|
* Fixed 30MHz oscillator inputs to SoC
|
|
*/
|
|
clk_sysin: clk-sysin {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <30000000>;
|
|
clock-output-names = "CLK_SYSIN";
|
|
};
|
|
|
|
/*
|
|
* ARM Peripheral clock for timers
|
|
*/
|
|
arm_periph_clk: clk-m-a9-periphs {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&clk_m_a9>;
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
};
|
|
|
|
/*
|
|
* A9 PLL.
|
|
*/
|
|
clockgen-a9@92b0000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x92b0000 0xffff>;
|
|
|
|
clockgen_a9_pll: clockgen-a9-pll {
|
|
#clock-cells = <1>;
|
|
compatible = "st,stih407-clkgen-plla9";
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clockgen-a9-pll-odf";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* ARM CPU related clocks.
|
|
*/
|
|
clk_m_a9: clk-m-a9@92b0000 {
|
|
#clock-cells = <0>;
|
|
compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
|
|
reg = <0x92b0000 0x10000>;
|
|
|
|
clocks = <&clockgen_a9_pll 0>,
|
|
<&clockgen_a9_pll 0>,
|
|
<&clk_s_c0_flexgen 13>,
|
|
<&clk_m_a9_ext2f_div2>;
|
|
};
|
|
|
|
/*
|
|
* ARM Peripheral clock for timers
|
|
*/
|
|
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
|
|
clocks = <&clk_s_c0_flexgen 13>;
|
|
|
|
clock-output-names = "clk-m-a9-ext2f-div2";
|
|
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
};
|
|
|
|
/*
|
|
* Bootloader initialized system infrastructure clock for
|
|
* serial devices.
|
|
*/
|
|
clk_ext2f_a9: clockgen-c0@13 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <200000000>;
|
|
clock-output-names = "clk-s-icn-reg-0";
|
|
};
|
|
|
|
clockgen-a@090ff000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x90ff000 0x1000>;
|
|
|
|
clk_s_a0_pll: clk-s-a0-pll {
|
|
#clock-cells = <1>;
|
|
compatible = "st,clkgen-pll0";
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-a0-pll-ofd-0";
|
|
clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
|
|
};
|
|
|
|
clk_s_a0_flexgen: clk-s-a0-flexgen {
|
|
compatible = "st,flexgen";
|
|
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&clk_s_a0_pll 0>,
|
|
<&clk_sysin>;
|
|
|
|
clock-output-names = "clk-ic-lmi0",
|
|
"clk-ic-lmi1";
|
|
clock-critical = <CLK_IC_LMI0>;
|
|
};
|
|
};
|
|
|
|
clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,quadfs-pll";
|
|
reg = <0x9103000 0x1000>;
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-c0-fs0-ch0",
|
|
"clk-s-c0-fs0-ch1",
|
|
"clk-s-c0-fs0-ch2",
|
|
"clk-s-c0-fs0-ch3";
|
|
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
|
|
};
|
|
|
|
clk_s_c0: clockgen-c@09103000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x9103000 0x1000>;
|
|
|
|
clk_s_c0_pll0: clk-s-c0-pll0 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,clkgen-pll0";
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-c0-pll0-odf-0";
|
|
clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
|
|
};
|
|
|
|
clk_s_c0_pll1: clk-s-c0-pll1 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,clkgen-pll1";
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-c0-pll1-odf-0";
|
|
};
|
|
|
|
clk_s_c0_flexgen: clk-s-c0-flexgen {
|
|
#clock-cells = <1>;
|
|
compatible = "st,flexgen";
|
|
|
|
clocks = <&clk_s_c0_pll0 0>,
|
|
<&clk_s_c0_pll1 0>,
|
|
<&clk_s_c0_quadfs 0>,
|
|
<&clk_s_c0_quadfs 1>,
|
|
<&clk_s_c0_quadfs 2>,
|
|
<&clk_s_c0_quadfs 3>,
|
|
<&clk_sysin>;
|
|
|
|
clock-output-names = "clk-icn-gpu",
|
|
"clk-fdma",
|
|
"clk-nand",
|
|
"clk-hva",
|
|
"clk-proc-stfe",
|
|
"clk-proc-tp",
|
|
"clk-rx-icn-dmu",
|
|
"clk-rx-icn-hva",
|
|
"clk-icn-cpu",
|
|
"clk-tx-icn-dmu",
|
|
"clk-mmc-0",
|
|
"clk-mmc-1",
|
|
"clk-jpegdec",
|
|
"clk-ext2fa9",
|
|
"clk-ic-bdisp-0",
|
|
"clk-ic-bdisp-1",
|
|
"clk-pp-dmu",
|
|
"clk-vid-dmu",
|
|
"clk-dss-lpc",
|
|
"clk-st231-aud-0",
|
|
"clk-st231-gp-1",
|
|
"clk-st231-dmu",
|
|
"clk-icn-lmi",
|
|
"clk-tx-icn-disp-1",
|
|
"clk-icn-sbc",
|
|
"clk-stfe-frc2",
|
|
"clk-eth-phy",
|
|
"clk-eth-ref-phyclk",
|
|
"clk-flash-promip",
|
|
"clk-main-disp",
|
|
"clk-aux-disp",
|
|
"clk-compo-dvp",
|
|
"clk-tx-icn-hades",
|
|
"clk-rx-icn-hades",
|
|
"clk-icn-reg-16",
|
|
"clk-pp-hades",
|
|
"clk-clust-hades",
|
|
"clk-hwpe-hades",
|
|
"clk-fc-hades";
|
|
clock-critical = <CLK_PROC_STFE>,
|
|
<CLK_ICN_CPU>,
|
|
<CLK_TX_ICN_DMU>,
|
|
<CLK_EXT2F_A9>,
|
|
<CLK_ICN_LMI>,
|
|
<CLK_ICN_SBC>;
|
|
};
|
|
};
|
|
|
|
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,quadfs";
|
|
reg = <0x9104000 0x1000>;
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-d0-fs0-ch0",
|
|
"clk-s-d0-fs0-ch1",
|
|
"clk-s-d0-fs0-ch2",
|
|
"clk-s-d0-fs0-ch3";
|
|
};
|
|
|
|
clockgen-d0@09104000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x9104000 0x1000>;
|
|
|
|
clk_s_d0_flexgen: clk-s-d0-flexgen {
|
|
#clock-cells = <1>;
|
|
compatible = "st,flexgen-audio", "st,flexgen";
|
|
|
|
clocks = <&clk_s_d0_quadfs 0>,
|
|
<&clk_s_d0_quadfs 1>,
|
|
<&clk_s_d0_quadfs 2>,
|
|
<&clk_s_d0_quadfs 3>,
|
|
<&clk_sysin>;
|
|
|
|
clock-output-names = "clk-pcm-0",
|
|
"clk-pcm-1",
|
|
"clk-pcm-2",
|
|
"clk-spdiff",
|
|
"clk-pcmr10-master",
|
|
"clk-usb2-phy";
|
|
};
|
|
};
|
|
|
|
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,quadfs";
|
|
reg = <0x9106000 0x1000>;
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-d2-fs0-ch0",
|
|
"clk-s-d2-fs0-ch1",
|
|
"clk-s-d2-fs0-ch2",
|
|
"clk-s-d2-fs0-ch3";
|
|
};
|
|
|
|
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
clockgen-d2@x9106000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x9106000 0x1000>;
|
|
|
|
clk_s_d2_flexgen: clk-s-d2-flexgen {
|
|
#clock-cells = <1>;
|
|
compatible = "st,flexgen-video", "st,flexgen";
|
|
|
|
clocks = <&clk_s_d2_quadfs 0>,
|
|
<&clk_s_d2_quadfs 1>,
|
|
<&clk_s_d2_quadfs 2>,
|
|
<&clk_s_d2_quadfs 3>,
|
|
<&clk_sysin>,
|
|
<&clk_sysin>,
|
|
<&clk_tmdsout_hdmi>;
|
|
|
|
clock-output-names = "clk-pix-main-disp",
|
|
"clk-pix-pip",
|
|
"clk-pix-gdp1",
|
|
"clk-pix-gdp2",
|
|
"clk-pix-gdp3",
|
|
"clk-pix-gdp4",
|
|
"clk-pix-aux-disp",
|
|
"clk-denc",
|
|
"clk-pix-hddac",
|
|
"clk-hddac",
|
|
"clk-sddac",
|
|
"clk-pix-dvo",
|
|
"clk-dvo",
|
|
"clk-pix-hdmi",
|
|
"clk-tmds-hdmi",
|
|
"clk-ref-hdmiphy";
|
|
};
|
|
};
|
|
|
|
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,quadfs";
|
|
reg = <0x9107000 0x1000>;
|
|
|
|
clocks = <&clk_sysin>;
|
|
|
|
clock-output-names = "clk-s-d3-fs0-ch0",
|
|
"clk-s-d3-fs0-ch1",
|
|
"clk-s-d3-fs0-ch2",
|
|
"clk-s-d3-fs0-ch3";
|
|
};
|
|
|
|
clockgen-d3@9107000 {
|
|
compatible = "st,clkgen-c32";
|
|
reg = <0x9107000 0x1000>;
|
|
|
|
clk_s_d3_flexgen: clk-s-d3-flexgen {
|
|
#clock-cells = <1>;
|
|
compatible = "st,flexgen";
|
|
|
|
clocks = <&clk_s_d3_quadfs 0>,
|
|
<&clk_s_d3_quadfs 1>,
|
|
<&clk_s_d3_quadfs 2>,
|
|
<&clk_s_d3_quadfs 3>,
|
|
<&clk_sysin>;
|
|
|
|
clock-output-names = "clk-stfe-frc1",
|
|
"clk-tsout-0",
|
|
"clk-tsout-1",
|
|
"clk-mchi",
|
|
"clk-vsens-compo",
|
|
"clk-frc1-remote",
|
|
"clk-lpc-0",
|
|
"clk-lpc-1";
|
|
};
|
|
};
|
|
};
|
|
};
|