linux_dsm_epyc7002/arch/x86/include/asm/intel-mid.h
Mika Westerberg 781adff21c x86/platform/intel-mid: Add empty stubs for intel_scu_devices_[create|destroy]()
This allows to call the functions even when CONFIG_X86_INTEL_MID is not
enabled.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-04-24 11:18:21 +01:00

134 lines
3.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* intel-mid.h: Intel MID specific setup code
*
* (C) Copyright 2009 Intel Corporation
*/
#ifndef _ASM_X86_INTEL_MID_H
#define _ASM_X86_INTEL_MID_H
#include <linux/sfi.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
extern int intel_mid_pci_init(void);
extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
extern pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev);
extern void intel_mid_pwr_power_off(void);
#define INTEL_MID_PWR_LSS_OFFSET 4
#define INTEL_MID_PWR_LSS_TYPE (1 << 7)
extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
extern int get_gpio_by_name(const char *name);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
extern int sfi_mrtc_num;
extern struct sfi_rtc_table_entry sfi_mrtc_array[];
/*
* Here defines the array of devices platform data that IAFW would export
* through SFI "DEVS" table, we use name and type to match the device and
* its platform data.
*/
struct devs_id {
char name[SFI_NAME_LEN + 1];
u8 type;
u8 delay;
u8 msic;
void *(*get_platform_data)(void *info);
};
#define sfi_device(i) \
static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
__attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
/**
* struct mid_sd_board_info - template for SD device creation
* @name: identifies the driver
* @bus_num: board-specific identifier for a given SD controller
* @max_clk: the maximum frequency device supports
* @platform_data: the particular data stored there is driver-specific
*/
struct mid_sd_board_info {
char name[SFI_NAME_LEN];
int bus_num;
unsigned short addr;
u32 max_clk;
void *platform_data;
};
/*
* Medfield is the follow-up of Moorestown, it combines two chip solution into
* one. Other than that it also added always-on and constant tsc and lapic
* timers. Medfield is the platform name, and the chip name is called Penwell
* we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
* identified via MSRs.
*/
enum intel_mid_cpu_type {
/* 1 was Moorestown */
INTEL_MID_CPU_CHIP_PENWELL = 2,
INTEL_MID_CPU_CHIP_CLOVERVIEW,
INTEL_MID_CPU_CHIP_TANGIER,
};
extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
#ifdef CONFIG_X86_INTEL_MID
static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
{
return __intel_mid_cpu_chip;
}
static inline bool intel_mid_has_msic(void)
{
return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
}
extern void intel_scu_devices_create(void);
extern void intel_scu_devices_destroy(void);
#else /* !CONFIG_X86_INTEL_MID */
#define intel_mid_identify_cpu() 0
#define intel_mid_has_msic() 0
static inline void intel_scu_devices_create(void) { }
static inline void intel_scu_devices_destroy(void) { }
#endif /* !CONFIG_X86_INTEL_MID */
enum intel_mid_timer_options {
INTEL_MID_TIMER_DEFAULT,
INTEL_MID_TIMER_APBT_ONLY,
INTEL_MID_TIMER_LAPIC_APBT,
};
extern enum intel_mid_timer_options intel_mid_timer_options;
/* Bus Select SoC Fuse value */
#define BSEL_SOC_FUSE_MASK 0x7
/* FSB 133MHz */
#define BSEL_SOC_FUSE_001 0x1
/* FSB 100MHz */
#define BSEL_SOC_FUSE_101 0x5
/* FSB 83MHz */
#define BSEL_SOC_FUSE_111 0x7
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
/* VRTC timer */
#define MRST_VRTC_MAP_SZ 1024
/* #define MRST_VRTC_PGOFFSET 0xc00 */
extern void intel_mid_rtc_init(void);
/* The offset for the mapping of global gpio pin to irq */
#define INTEL_MID_IRQ_OFFSET 0x100
#endif /* _ASM_X86_INTEL_MID_H */