mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 13:56:53 +07:00
e8aeb60c38
Disable interrupts and poll under high load Signed-off-by: Jon Mason <jon.mason@intel.com>
1524 lines
41 KiB
C
1524 lines
41 KiB
C
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2012 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2012 Intel Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copy
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Intel PCIe NTB Linux driver
|
|
*
|
|
* Contact Information:
|
|
* Jon Mason <jon.mason@intel.com>
|
|
*/
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/random.h>
|
|
#include <linux/slab.h>
|
|
#include "ntb_hw.h"
|
|
#include "ntb_regs.h"
|
|
|
|
#define NTB_NAME "Intel(R) PCI-E Non-Transparent Bridge Driver"
|
|
#define NTB_VER "1.0"
|
|
|
|
MODULE_DESCRIPTION(NTB_NAME);
|
|
MODULE_VERSION(NTB_VER);
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_AUTHOR("Intel Corporation");
|
|
|
|
static bool xeon_errata_workaround = true;
|
|
module_param(xeon_errata_workaround, bool, 0644);
|
|
MODULE_PARM_DESC(xeon_errata_workaround, "Workaround for the Xeon Errata");
|
|
|
|
enum {
|
|
NTB_CONN_TRANSPARENT = 0,
|
|
NTB_CONN_B2B,
|
|
NTB_CONN_RP,
|
|
};
|
|
|
|
enum {
|
|
NTB_DEV_USD = 0,
|
|
NTB_DEV_DSD,
|
|
};
|
|
|
|
enum {
|
|
SNB_HW = 0,
|
|
BWD_HW,
|
|
};
|
|
|
|
static struct dentry *debugfs_dir;
|
|
|
|
#define BWD_LINK_RECOVERY_TIME 500
|
|
|
|
/* Translate memory window 0,1 to BAR 2,4 */
|
|
#define MW_TO_BAR(mw) (mw * NTB_MAX_NUM_MW + 2)
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(ntb_pci_tbl) = {
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_BWD)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_JSF)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_SNB)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_IVT)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_HSX)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_PS_JSF)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_PS_SNB)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_PS_IVT)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_PS_HSX)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_JSF)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_SNB)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_IVT)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_HSX)},
|
|
{0}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ntb_pci_tbl);
|
|
|
|
/**
|
|
* ntb_register_event_callback() - register event callback
|
|
* @ndev: pointer to ntb_device instance
|
|
* @func: callback function to register
|
|
*
|
|
* This function registers a callback for any HW driver events such as link
|
|
* up/down, power management notices and etc.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_register_event_callback(struct ntb_device *ndev,
|
|
void (*func)(void *handle, enum ntb_hw_event event))
|
|
{
|
|
if (ndev->event_cb)
|
|
return -EINVAL;
|
|
|
|
ndev->event_cb = func;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_unregister_event_callback() - unregisters the event callback
|
|
* @ndev: pointer to ntb_device instance
|
|
*
|
|
* This function unregisters the existing callback from transport
|
|
*/
|
|
void ntb_unregister_event_callback(struct ntb_device *ndev)
|
|
{
|
|
ndev->event_cb = NULL;
|
|
}
|
|
|
|
static void ntb_irq_work(unsigned long data)
|
|
{
|
|
struct ntb_db_cb *db_cb = (struct ntb_db_cb *)data;
|
|
int rc;
|
|
|
|
rc = db_cb->callback(db_cb->data, db_cb->db_num);
|
|
if (rc)
|
|
tasklet_schedule(&db_cb->irq_work);
|
|
else {
|
|
struct ntb_device *ndev = db_cb->ndev;
|
|
unsigned long mask;
|
|
|
|
mask = readw(ndev->reg_ofs.ldb_mask);
|
|
clear_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
|
|
writew(mask, ndev->reg_ofs.ldb_mask);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ntb_register_db_callback() - register a callback for doorbell interrupt
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: doorbell index to register callback, zero based
|
|
* @data: pointer to be returned to caller with every callback
|
|
* @func: callback function to register
|
|
*
|
|
* This function registers a callback function for the doorbell interrupt
|
|
* on the primary side. The function will unmask the doorbell as well to
|
|
* allow interrupt.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
|
|
void *data, int (*func)(void *data, int db_num))
|
|
{
|
|
unsigned long mask;
|
|
|
|
if (idx >= ndev->max_cbs || ndev->db_cb[idx].callback) {
|
|
dev_warn(&ndev->pdev->dev, "Invalid Index.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ndev->db_cb[idx].callback = func;
|
|
ndev->db_cb[idx].data = data;
|
|
ndev->db_cb[idx].ndev = ndev;
|
|
|
|
tasklet_init(&ndev->db_cb[idx].irq_work, ntb_irq_work,
|
|
(unsigned long) &ndev->db_cb[idx]);
|
|
|
|
/* unmask interrupt */
|
|
mask = readw(ndev->reg_ofs.ldb_mask);
|
|
clear_bit(idx * ndev->bits_per_vector, &mask);
|
|
writew(mask, ndev->reg_ofs.ldb_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_unregister_db_callback() - unregister a callback for doorbell interrupt
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: doorbell index to register callback, zero based
|
|
*
|
|
* This function unregisters a callback function for the doorbell interrupt
|
|
* on the primary side. The function will also mask the said doorbell.
|
|
*/
|
|
void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx)
|
|
{
|
|
unsigned long mask;
|
|
|
|
if (idx >= ndev->max_cbs || !ndev->db_cb[idx].callback)
|
|
return;
|
|
|
|
mask = readw(ndev->reg_ofs.ldb_mask);
|
|
set_bit(idx * ndev->bits_per_vector, &mask);
|
|
writew(mask, ndev->reg_ofs.ldb_mask);
|
|
|
|
tasklet_disable(&ndev->db_cb[idx].irq_work);
|
|
|
|
ndev->db_cb[idx].callback = NULL;
|
|
}
|
|
|
|
/**
|
|
* ntb_find_transport() - find the transport pointer
|
|
* @transport: pointer to pci device
|
|
*
|
|
* Given the pci device pointer, return the transport pointer passed in when
|
|
* the transport attached when it was inited.
|
|
*
|
|
* RETURNS: pointer to transport.
|
|
*/
|
|
void *ntb_find_transport(struct pci_dev *pdev)
|
|
{
|
|
struct ntb_device *ndev = pci_get_drvdata(pdev);
|
|
return ndev->ntb_transport;
|
|
}
|
|
|
|
/**
|
|
* ntb_register_transport() - Register NTB transport with NTB HW driver
|
|
* @transport: transport identifier
|
|
*
|
|
* This function allows a transport to reserve the hardware driver for
|
|
* NTB usage.
|
|
*
|
|
* RETURNS: pointer to ntb_device, NULL on error.
|
|
*/
|
|
struct ntb_device *ntb_register_transport(struct pci_dev *pdev, void *transport)
|
|
{
|
|
struct ntb_device *ndev = pci_get_drvdata(pdev);
|
|
|
|
if (ndev->ntb_transport)
|
|
return NULL;
|
|
|
|
ndev->ntb_transport = transport;
|
|
return ndev;
|
|
}
|
|
|
|
/**
|
|
* ntb_unregister_transport() - Unregister the transport with the NTB HW driver
|
|
* @ndev - ntb_device of the transport to be freed
|
|
*
|
|
* This function unregisters the transport from the HW driver and performs any
|
|
* necessary cleanups.
|
|
*/
|
|
void ntb_unregister_transport(struct ntb_device *ndev)
|
|
{
|
|
int i;
|
|
|
|
if (!ndev->ntb_transport)
|
|
return;
|
|
|
|
for (i = 0; i < ndev->max_cbs; i++)
|
|
ntb_unregister_db_callback(ndev, i);
|
|
|
|
ntb_unregister_event_callback(ndev);
|
|
ndev->ntb_transport = NULL;
|
|
}
|
|
|
|
/**
|
|
* ntb_write_local_spad() - write to the secondary scratchpad register
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: index to the scratchpad register, 0 based
|
|
* @val: the data value to put into the register
|
|
*
|
|
* This function allows writing of a 32bit value to the indexed scratchpad
|
|
* register. This writes over the data mirrored to the local scratchpad register
|
|
* by the remote system.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_write_local_spad(struct ntb_device *ndev, unsigned int idx, u32 val)
|
|
{
|
|
if (idx >= ndev->limits.max_spads)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "Writing %x to local scratch pad index %d\n",
|
|
val, idx);
|
|
writel(val, ndev->reg_ofs.spad_read + idx * 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_read_local_spad() - read from the primary scratchpad register
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: index to scratchpad register, 0 based
|
|
* @val: pointer to 32bit integer for storing the register value
|
|
*
|
|
* This function allows reading of the 32bit scratchpad register on
|
|
* the primary (internal) side. This allows the local system to read data
|
|
* written and mirrored to the scratchpad register by the remote system.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_read_local_spad(struct ntb_device *ndev, unsigned int idx, u32 *val)
|
|
{
|
|
if (idx >= ndev->limits.max_spads)
|
|
return -EINVAL;
|
|
|
|
*val = readl(ndev->reg_ofs.spad_write + idx * 4);
|
|
dev_dbg(&ndev->pdev->dev,
|
|
"Reading %x from local scratch pad index %d\n", *val, idx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_write_remote_spad() - write to the secondary scratchpad register
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: index to the scratchpad register, 0 based
|
|
* @val: the data value to put into the register
|
|
*
|
|
* This function allows writing of a 32bit value to the indexed scratchpad
|
|
* register. The register resides on the secondary (external) side. This allows
|
|
* the local system to write data to be mirrored to the remote systems
|
|
* scratchpad register.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_write_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 val)
|
|
{
|
|
if (idx >= ndev->limits.max_spads)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "Writing %x to remote scratch pad index %d\n",
|
|
val, idx);
|
|
writel(val, ndev->reg_ofs.spad_write + idx * 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_read_remote_spad() - read from the primary scratchpad register
|
|
* @ndev: pointer to ntb_device instance
|
|
* @idx: index to scratchpad register, 0 based
|
|
* @val: pointer to 32bit integer for storing the register value
|
|
*
|
|
* This function allows reading of the 32bit scratchpad register on
|
|
* the primary (internal) side. This alloows the local system to read the data
|
|
* it wrote to be mirrored on the remote system.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int ntb_read_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 *val)
|
|
{
|
|
if (idx >= ndev->limits.max_spads)
|
|
return -EINVAL;
|
|
|
|
*val = readl(ndev->reg_ofs.spad_read + idx * 4);
|
|
dev_dbg(&ndev->pdev->dev,
|
|
"Reading %x from remote scratch pad index %d\n", *val, idx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ntb_get_mw_base() - get addr for the NTB memory window
|
|
* @ndev: pointer to ntb_device instance
|
|
* @mw: memory window number
|
|
*
|
|
* This function provides the base address of the memory window specified.
|
|
*
|
|
* RETURNS: address, or NULL on error.
|
|
*/
|
|
resource_size_t ntb_get_mw_base(struct ntb_device *ndev, unsigned int mw)
|
|
{
|
|
if (mw >= ntb_max_mw(ndev))
|
|
return 0;
|
|
|
|
return pci_resource_start(ndev->pdev, MW_TO_BAR(mw));
|
|
}
|
|
|
|
/**
|
|
* ntb_get_mw_vbase() - get virtual addr for the NTB memory window
|
|
* @ndev: pointer to ntb_device instance
|
|
* @mw: memory window number
|
|
*
|
|
* This function provides the base virtual address of the memory window
|
|
* specified.
|
|
*
|
|
* RETURNS: pointer to virtual address, or NULL on error.
|
|
*/
|
|
void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw)
|
|
{
|
|
if (mw >= ntb_max_mw(ndev))
|
|
return NULL;
|
|
|
|
return ndev->mw[mw].vbase;
|
|
}
|
|
|
|
/**
|
|
* ntb_get_mw_size() - return size of NTB memory window
|
|
* @ndev: pointer to ntb_device instance
|
|
* @mw: memory window number
|
|
*
|
|
* This function provides the physical size of the memory window specified
|
|
*
|
|
* RETURNS: the size of the memory window or zero on error
|
|
*/
|
|
u64 ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw)
|
|
{
|
|
if (mw >= ntb_max_mw(ndev))
|
|
return 0;
|
|
|
|
return ndev->mw[mw].bar_sz;
|
|
}
|
|
|
|
/**
|
|
* ntb_set_mw_addr - set the memory window address
|
|
* @ndev: pointer to ntb_device instance
|
|
* @mw: memory window number
|
|
* @addr: base address for data
|
|
*
|
|
* This function sets the base physical address of the memory window. This
|
|
* memory address is where data from the remote system will be transfered into
|
|
* or out of depending on how the transport is configured.
|
|
*/
|
|
void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr)
|
|
{
|
|
if (mw >= ntb_max_mw(ndev))
|
|
return;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "Writing addr %Lx to BAR %d\n", addr,
|
|
MW_TO_BAR(mw));
|
|
|
|
ndev->mw[mw].phys_addr = addr;
|
|
|
|
switch (MW_TO_BAR(mw)) {
|
|
case NTB_BAR_23:
|
|
writeq(addr, ndev->reg_ofs.bar2_xlat);
|
|
break;
|
|
case NTB_BAR_45:
|
|
writeq(addr, ndev->reg_ofs.bar4_xlat);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ntb_ring_doorbell() - Set the doorbell on the secondary/external side
|
|
* @ndev: pointer to ntb_device instance
|
|
* @db: doorbell to ring
|
|
*
|
|
* This function allows triggering of a doorbell on the secondary/external
|
|
* side that will initiate an interrupt on the remote host
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
void ntb_ring_doorbell(struct ntb_device *ndev, unsigned int db)
|
|
{
|
|
dev_dbg(&ndev->pdev->dev, "%s: ringing doorbell %d\n", __func__, db);
|
|
|
|
if (ndev->hw_type == BWD_HW)
|
|
writeq((u64) 1 << db, ndev->reg_ofs.rdb);
|
|
else
|
|
writew(((1 << ndev->bits_per_vector) - 1) <<
|
|
(db * ndev->bits_per_vector), ndev->reg_ofs.rdb);
|
|
}
|
|
|
|
static void bwd_recover_link(struct ntb_device *ndev)
|
|
{
|
|
u32 status;
|
|
|
|
/* Driver resets the NTB ModPhy lanes - magic! */
|
|
writeb(0xe0, ndev->reg_base + BWD_MODPHY_PCSREG6);
|
|
writeb(0x40, ndev->reg_base + BWD_MODPHY_PCSREG4);
|
|
writeb(0x60, ndev->reg_base + BWD_MODPHY_PCSREG4);
|
|
writeb(0x60, ndev->reg_base + BWD_MODPHY_PCSREG6);
|
|
|
|
/* Driver waits 100ms to allow the NTB ModPhy to settle */
|
|
msleep(100);
|
|
|
|
/* Clear AER Errors, write to clear */
|
|
status = readl(ndev->reg_base + BWD_ERRCORSTS_OFFSET);
|
|
dev_dbg(&ndev->pdev->dev, "ERRCORSTS = %x\n", status);
|
|
status &= PCI_ERR_COR_REP_ROLL;
|
|
writel(status, ndev->reg_base + BWD_ERRCORSTS_OFFSET);
|
|
|
|
/* Clear unexpected electrical idle event in LTSSM, write to clear */
|
|
status = readl(ndev->reg_base + BWD_LTSSMERRSTS0_OFFSET);
|
|
dev_dbg(&ndev->pdev->dev, "LTSSMERRSTS0 = %x\n", status);
|
|
status |= BWD_LTSSMERRSTS0_UNEXPECTEDEI;
|
|
writel(status, ndev->reg_base + BWD_LTSSMERRSTS0_OFFSET);
|
|
|
|
/* Clear DeSkew Buffer error, write to clear */
|
|
status = readl(ndev->reg_base + BWD_DESKEWSTS_OFFSET);
|
|
dev_dbg(&ndev->pdev->dev, "DESKEWSTS = %x\n", status);
|
|
status |= BWD_DESKEWSTS_DBERR;
|
|
writel(status, ndev->reg_base + BWD_DESKEWSTS_OFFSET);
|
|
|
|
status = readl(ndev->reg_base + BWD_IBSTERRRCRVSTS0_OFFSET);
|
|
dev_dbg(&ndev->pdev->dev, "IBSTERRRCRVSTS0 = %x\n", status);
|
|
status &= BWD_IBIST_ERR_OFLOW;
|
|
writel(status, ndev->reg_base + BWD_IBSTERRRCRVSTS0_OFFSET);
|
|
|
|
/* Releases the NTB state machine to allow the link to retrain */
|
|
status = readl(ndev->reg_base + BWD_LTSSMSTATEJMP_OFFSET);
|
|
dev_dbg(&ndev->pdev->dev, "LTSSMSTATEJMP = %x\n", status);
|
|
status &= ~BWD_LTSSMSTATEJMP_FORCEDETECT;
|
|
writel(status, ndev->reg_base + BWD_LTSSMSTATEJMP_OFFSET);
|
|
}
|
|
|
|
static void ntb_link_event(struct ntb_device *ndev, int link_state)
|
|
{
|
|
unsigned int event;
|
|
|
|
if (ndev->link_status == link_state)
|
|
return;
|
|
|
|
if (link_state == NTB_LINK_UP) {
|
|
u16 status;
|
|
|
|
dev_info(&ndev->pdev->dev, "Link Up\n");
|
|
ndev->link_status = NTB_LINK_UP;
|
|
event = NTB_EVENT_HW_LINK_UP;
|
|
|
|
if (ndev->hw_type == BWD_HW ||
|
|
ndev->conn_type == NTB_CONN_TRANSPARENT)
|
|
status = readw(ndev->reg_ofs.lnk_stat);
|
|
else {
|
|
int rc = pci_read_config_word(ndev->pdev,
|
|
SNB_LINK_STATUS_OFFSET,
|
|
&status);
|
|
if (rc)
|
|
return;
|
|
}
|
|
|
|
ndev->link_width = (status & NTB_LINK_WIDTH_MASK) >> 4;
|
|
ndev->link_speed = (status & NTB_LINK_SPEED_MASK);
|
|
dev_info(&ndev->pdev->dev, "Link Width %d, Link Speed %d\n",
|
|
ndev->link_width, ndev->link_speed);
|
|
} else {
|
|
dev_info(&ndev->pdev->dev, "Link Down\n");
|
|
ndev->link_status = NTB_LINK_DOWN;
|
|
event = NTB_EVENT_HW_LINK_DOWN;
|
|
/* Don't modify link width/speed, we need it in link recovery */
|
|
}
|
|
|
|
/* notify the upper layer if we have an event change */
|
|
if (ndev->event_cb)
|
|
ndev->event_cb(ndev->ntb_transport, event);
|
|
}
|
|
|
|
static int ntb_link_status(struct ntb_device *ndev)
|
|
{
|
|
int link_state;
|
|
|
|
if (ndev->hw_type == BWD_HW) {
|
|
u32 ntb_cntl;
|
|
|
|
ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
|
|
if (ntb_cntl & BWD_CNTL_LINK_DOWN)
|
|
link_state = NTB_LINK_DOWN;
|
|
else
|
|
link_state = NTB_LINK_UP;
|
|
} else {
|
|
u16 status;
|
|
int rc;
|
|
|
|
rc = pci_read_config_word(ndev->pdev, SNB_LINK_STATUS_OFFSET,
|
|
&status);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (status & NTB_LINK_STATUS_ACTIVE)
|
|
link_state = NTB_LINK_UP;
|
|
else
|
|
link_state = NTB_LINK_DOWN;
|
|
}
|
|
|
|
ntb_link_event(ndev, link_state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bwd_link_recovery(struct work_struct *work)
|
|
{
|
|
struct ntb_device *ndev = container_of(work, struct ntb_device,
|
|
lr_timer.work);
|
|
u32 status32;
|
|
|
|
bwd_recover_link(ndev);
|
|
/* There is a potential race between the 2 NTB devices recovering at the
|
|
* same time. If the times are the same, the link will not recover and
|
|
* the driver will be stuck in this loop forever. Add a random interval
|
|
* to the recovery time to prevent this race.
|
|
*/
|
|
msleep(BWD_LINK_RECOVERY_TIME + prandom_u32() % BWD_LINK_RECOVERY_TIME);
|
|
|
|
status32 = readl(ndev->reg_base + BWD_LTSSMSTATEJMP_OFFSET);
|
|
if (status32 & BWD_LTSSMSTATEJMP_FORCEDETECT)
|
|
goto retry;
|
|
|
|
status32 = readl(ndev->reg_base + BWD_IBSTERRRCRVSTS0_OFFSET);
|
|
if (status32 & BWD_IBIST_ERR_OFLOW)
|
|
goto retry;
|
|
|
|
status32 = readl(ndev->reg_ofs.lnk_cntl);
|
|
if (!(status32 & BWD_CNTL_LINK_DOWN)) {
|
|
unsigned char speed, width;
|
|
u16 status16;
|
|
|
|
status16 = readw(ndev->reg_ofs.lnk_stat);
|
|
width = (status16 & NTB_LINK_WIDTH_MASK) >> 4;
|
|
speed = (status16 & NTB_LINK_SPEED_MASK);
|
|
if (ndev->link_width != width || ndev->link_speed != speed)
|
|
goto retry;
|
|
}
|
|
|
|
schedule_delayed_work(&ndev->hb_timer, NTB_HB_TIMEOUT);
|
|
return;
|
|
|
|
retry:
|
|
schedule_delayed_work(&ndev->lr_timer, NTB_HB_TIMEOUT);
|
|
}
|
|
|
|
/* BWD doesn't have link status interrupt, poll on that platform */
|
|
static void bwd_link_poll(struct work_struct *work)
|
|
{
|
|
struct ntb_device *ndev = container_of(work, struct ntb_device,
|
|
hb_timer.work);
|
|
unsigned long ts = jiffies;
|
|
|
|
/* If we haven't gotten an interrupt in a while, check the BWD link
|
|
* status bit
|
|
*/
|
|
if (ts > ndev->last_ts + NTB_HB_TIMEOUT) {
|
|
int rc = ntb_link_status(ndev);
|
|
if (rc)
|
|
dev_err(&ndev->pdev->dev,
|
|
"Error determining link status\n");
|
|
|
|
/* Check to see if a link error is the cause of the link down */
|
|
if (ndev->link_status == NTB_LINK_DOWN) {
|
|
u32 status32 = readl(ndev->reg_base +
|
|
BWD_LTSSMSTATEJMP_OFFSET);
|
|
if (status32 & BWD_LTSSMSTATEJMP_FORCEDETECT) {
|
|
schedule_delayed_work(&ndev->lr_timer, 0);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
schedule_delayed_work(&ndev->hb_timer, NTB_HB_TIMEOUT);
|
|
}
|
|
|
|
static int ntb_xeon_setup(struct ntb_device *ndev)
|
|
{
|
|
int rc;
|
|
u8 val;
|
|
|
|
ndev->hw_type = SNB_HW;
|
|
|
|
rc = pci_read_config_byte(ndev->pdev, NTB_PPD_OFFSET, &val);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (val & SNB_PPD_DEV_TYPE)
|
|
ndev->dev_type = NTB_DEV_USD;
|
|
else
|
|
ndev->dev_type = NTB_DEV_DSD;
|
|
|
|
switch (val & SNB_PPD_CONN_TYPE) {
|
|
case NTB_CONN_B2B:
|
|
dev_info(&ndev->pdev->dev, "Conn Type = B2B\n");
|
|
ndev->conn_type = NTB_CONN_B2B;
|
|
ndev->reg_ofs.ldb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_PDBMSK_OFFSET;
|
|
ndev->reg_ofs.spad_read = ndev->reg_base + SNB_SPAD_OFFSET;
|
|
ndev->reg_ofs.bar2_xlat = ndev->reg_base + SNB_SBAR2XLAT_OFFSET;
|
|
ndev->reg_ofs.bar4_xlat = ndev->reg_base + SNB_SBAR4XLAT_OFFSET;
|
|
ndev->limits.max_spads = SNB_MAX_B2B_SPADS;
|
|
|
|
/* There is a Xeon hardware errata related to writes to
|
|
* SDOORBELL or B2BDOORBELL in conjunction with inbound access
|
|
* to NTB MMIO Space, which may hang the system. To workaround
|
|
* this use the second memory window to access the interrupt and
|
|
* scratch pad registers on the remote system.
|
|
*/
|
|
if (xeon_errata_workaround) {
|
|
if (!ndev->mw[1].bar_sz)
|
|
return -EINVAL;
|
|
|
|
ndev->limits.max_mw = SNB_ERRATA_MAX_MW;
|
|
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
|
|
ndev->reg_ofs.spad_write = ndev->mw[1].vbase +
|
|
SNB_SPAD_OFFSET;
|
|
ndev->reg_ofs.rdb = ndev->mw[1].vbase +
|
|
SNB_PDOORBELL_OFFSET;
|
|
|
|
/* Set the Limit register to 4k, the minimum size, to
|
|
* prevent an illegal access
|
|
*/
|
|
writeq(ndev->mw[1].bar_sz + 0x1000, ndev->reg_base +
|
|
SNB_PBAR4LMT_OFFSET);
|
|
/* HW errata on the Limit registers. They can only be
|
|
* written when the base register is 4GB aligned and
|
|
* < 32bit. This should already be the case based on the
|
|
* driver defaults, but write the Limit registers first
|
|
* just in case.
|
|
*/
|
|
} else {
|
|
ndev->limits.max_mw = SNB_MAX_MW;
|
|
|
|
/* HW Errata on bit 14 of b2bdoorbell register. Writes
|
|
* will not be mirrored to the remote system. Shrink
|
|
* the number of bits by one, since bit 14 is the last
|
|
* bit.
|
|
*/
|
|
ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1;
|
|
ndev->reg_ofs.spad_write = ndev->reg_base +
|
|
SNB_B2B_SPAD_OFFSET;
|
|
ndev->reg_ofs.rdb = ndev->reg_base +
|
|
SNB_B2B_DOORBELL_OFFSET;
|
|
|
|
/* Disable the Limit register, just incase it is set to
|
|
* something silly
|
|
*/
|
|
writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET);
|
|
/* HW errata on the Limit registers. They can only be
|
|
* written when the base register is 4GB aligned and
|
|
* < 32bit. This should already be the case based on the
|
|
* driver defaults, but write the Limit registers first
|
|
* just in case.
|
|
*/
|
|
}
|
|
|
|
/* The Xeon errata workaround requires setting SBAR Base
|
|
* addresses to known values, so that the PBAR XLAT can be
|
|
* pointed at SBAR0 of the remote system.
|
|
*/
|
|
if (ndev->dev_type == NTB_DEV_USD) {
|
|
writeq(SNB_MBAR23_DSD_ADDR, ndev->reg_base +
|
|
SNB_PBAR2XLAT_OFFSET);
|
|
if (xeon_errata_workaround)
|
|
writeq(SNB_MBAR01_DSD_ADDR, ndev->reg_base +
|
|
SNB_PBAR4XLAT_OFFSET);
|
|
else {
|
|
writeq(SNB_MBAR45_DSD_ADDR, ndev->reg_base +
|
|
SNB_PBAR4XLAT_OFFSET);
|
|
/* B2B_XLAT_OFFSET is a 64bit register, but can
|
|
* only take 32bit writes
|
|
*/
|
|
writel(SNB_MBAR01_DSD_ADDR & 0xffffffff,
|
|
ndev->reg_base + SNB_B2B_XLAT_OFFSETL);
|
|
writel(SNB_MBAR01_DSD_ADDR >> 32,
|
|
ndev->reg_base + SNB_B2B_XLAT_OFFSETU);
|
|
}
|
|
|
|
writeq(SNB_MBAR01_USD_ADDR, ndev->reg_base +
|
|
SNB_SBAR0BASE_OFFSET);
|
|
writeq(SNB_MBAR23_USD_ADDR, ndev->reg_base +
|
|
SNB_SBAR2BASE_OFFSET);
|
|
writeq(SNB_MBAR45_USD_ADDR, ndev->reg_base +
|
|
SNB_SBAR4BASE_OFFSET);
|
|
} else {
|
|
writeq(SNB_MBAR23_USD_ADDR, ndev->reg_base +
|
|
SNB_PBAR2XLAT_OFFSET);
|
|
if (xeon_errata_workaround)
|
|
writeq(SNB_MBAR01_USD_ADDR, ndev->reg_base +
|
|
SNB_PBAR4XLAT_OFFSET);
|
|
else {
|
|
writeq(SNB_MBAR45_USD_ADDR, ndev->reg_base +
|
|
SNB_PBAR4XLAT_OFFSET);
|
|
/* B2B_XLAT_OFFSET is a 64bit register, but can
|
|
* only take 32bit writes
|
|
*/
|
|
writel(SNB_MBAR01_DSD_ADDR & 0xffffffff,
|
|
ndev->reg_base + SNB_B2B_XLAT_OFFSETL);
|
|
writel(SNB_MBAR01_USD_ADDR >> 32,
|
|
ndev->reg_base + SNB_B2B_XLAT_OFFSETU);
|
|
}
|
|
writeq(SNB_MBAR01_DSD_ADDR, ndev->reg_base +
|
|
SNB_SBAR0BASE_OFFSET);
|
|
writeq(SNB_MBAR23_DSD_ADDR, ndev->reg_base +
|
|
SNB_SBAR2BASE_OFFSET);
|
|
writeq(SNB_MBAR45_DSD_ADDR, ndev->reg_base +
|
|
SNB_SBAR4BASE_OFFSET);
|
|
}
|
|
break;
|
|
case NTB_CONN_RP:
|
|
dev_info(&ndev->pdev->dev, "Conn Type = RP\n");
|
|
ndev->conn_type = NTB_CONN_RP;
|
|
|
|
if (xeon_errata_workaround) {
|
|
dev_err(&ndev->pdev->dev,
|
|
"NTB-RP disabled due to hardware errata. To disregard this warning and potentially lock-up the system, add the parameter 'xeon_errata_workaround=0'.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Scratch pads need to have exclusive access from the primary
|
|
* or secondary side. Halve the num spads so that each side can
|
|
* have an equal amount.
|
|
*/
|
|
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
|
|
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
|
|
/* Note: The SDOORBELL is the cause of the errata. You REALLY
|
|
* don't want to touch it.
|
|
*/
|
|
ndev->reg_ofs.rdb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_PDBMSK_OFFSET;
|
|
/* Offset the start of the spads to correspond to whether it is
|
|
* primary or secondary
|
|
*/
|
|
ndev->reg_ofs.spad_write = ndev->reg_base + SNB_SPAD_OFFSET +
|
|
ndev->limits.max_spads * 4;
|
|
ndev->reg_ofs.spad_read = ndev->reg_base + SNB_SPAD_OFFSET;
|
|
ndev->reg_ofs.bar2_xlat = ndev->reg_base + SNB_SBAR2XLAT_OFFSET;
|
|
ndev->reg_ofs.bar4_xlat = ndev->reg_base + SNB_SBAR4XLAT_OFFSET;
|
|
ndev->limits.max_mw = SNB_MAX_MW;
|
|
break;
|
|
case NTB_CONN_TRANSPARENT:
|
|
dev_info(&ndev->pdev->dev, "Conn Type = TRANSPARENT\n");
|
|
ndev->conn_type = NTB_CONN_TRANSPARENT;
|
|
/* Scratch pads need to have exclusive access from the primary
|
|
* or secondary side. Halve the num spads so that each side can
|
|
* have an equal amount.
|
|
*/
|
|
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
|
|
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
|
|
ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET;
|
|
ndev->reg_ofs.spad_write = ndev->reg_base + SNB_SPAD_OFFSET;
|
|
/* Offset the start of the spads to correspond to whether it is
|
|
* primary or secondary
|
|
*/
|
|
ndev->reg_ofs.spad_read = ndev->reg_base + SNB_SPAD_OFFSET +
|
|
ndev->limits.max_spads * 4;
|
|
ndev->reg_ofs.bar2_xlat = ndev->reg_base + SNB_PBAR2XLAT_OFFSET;
|
|
ndev->reg_ofs.bar4_xlat = ndev->reg_base + SNB_PBAR4XLAT_OFFSET;
|
|
|
|
ndev->limits.max_mw = SNB_MAX_MW;
|
|
break;
|
|
default:
|
|
/* Most likely caused by the remote NTB-RP device not being
|
|
* configured
|
|
*/
|
|
dev_err(&ndev->pdev->dev, "Unknown PPD %x\n", val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ndev->reg_ofs.lnk_cntl = ndev->reg_base + SNB_NTBCNTL_OFFSET;
|
|
ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET;
|
|
ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET;
|
|
|
|
ndev->limits.msix_cnt = SNB_MSIX_CNT;
|
|
ndev->bits_per_vector = SNB_DB_BITS_PER_VEC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ntb_bwd_setup(struct ntb_device *ndev)
|
|
{
|
|
int rc;
|
|
u32 val;
|
|
|
|
ndev->hw_type = BWD_HW;
|
|
|
|
rc = pci_read_config_dword(ndev->pdev, NTB_PPD_OFFSET, &val);
|
|
if (rc)
|
|
return rc;
|
|
|
|
switch ((val & BWD_PPD_CONN_TYPE) >> 8) {
|
|
case NTB_CONN_B2B:
|
|
ndev->conn_type = NTB_CONN_B2B;
|
|
break;
|
|
case NTB_CONN_RP:
|
|
default:
|
|
dev_err(&ndev->pdev->dev, "Unsupported NTB configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (val & BWD_PPD_DEV_TYPE)
|
|
ndev->dev_type = NTB_DEV_DSD;
|
|
else
|
|
ndev->dev_type = NTB_DEV_USD;
|
|
|
|
/* Initiate PCI-E link training */
|
|
rc = pci_write_config_dword(ndev->pdev, NTB_PPD_OFFSET,
|
|
val | BWD_PPD_INIT_LINK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ndev->reg_ofs.ldb = ndev->reg_base + BWD_PDOORBELL_OFFSET;
|
|
ndev->reg_ofs.ldb_mask = ndev->reg_base + BWD_PDBMSK_OFFSET;
|
|
ndev->reg_ofs.rdb = ndev->reg_base + BWD_B2B_DOORBELL_OFFSET;
|
|
ndev->reg_ofs.bar2_xlat = ndev->reg_base + BWD_SBAR2XLAT_OFFSET;
|
|
ndev->reg_ofs.bar4_xlat = ndev->reg_base + BWD_SBAR4XLAT_OFFSET;
|
|
ndev->reg_ofs.lnk_cntl = ndev->reg_base + BWD_NTBCNTL_OFFSET;
|
|
ndev->reg_ofs.lnk_stat = ndev->reg_base + BWD_LINK_STATUS_OFFSET;
|
|
ndev->reg_ofs.spad_read = ndev->reg_base + BWD_SPAD_OFFSET;
|
|
ndev->reg_ofs.spad_write = ndev->reg_base + BWD_B2B_SPAD_OFFSET;
|
|
ndev->reg_ofs.spci_cmd = ndev->reg_base + BWD_PCICMD_OFFSET;
|
|
ndev->limits.max_mw = BWD_MAX_MW;
|
|
ndev->limits.max_spads = BWD_MAX_SPADS;
|
|
ndev->limits.max_db_bits = BWD_MAX_DB_BITS;
|
|
ndev->limits.msix_cnt = BWD_MSIX_CNT;
|
|
ndev->bits_per_vector = BWD_DB_BITS_PER_VEC;
|
|
|
|
/* Since bwd doesn't have a link interrupt, setup a poll timer */
|
|
INIT_DELAYED_WORK(&ndev->hb_timer, bwd_link_poll);
|
|
INIT_DELAYED_WORK(&ndev->lr_timer, bwd_link_recovery);
|
|
schedule_delayed_work(&ndev->hb_timer, NTB_HB_TIMEOUT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ntb_device_setup(struct ntb_device *ndev)
|
|
{
|
|
int rc;
|
|
|
|
switch (ndev->pdev->device) {
|
|
case PCI_DEVICE_ID_INTEL_NTB_SS_JSF:
|
|
case PCI_DEVICE_ID_INTEL_NTB_SS_SNB:
|
|
case PCI_DEVICE_ID_INTEL_NTB_SS_IVT:
|
|
case PCI_DEVICE_ID_INTEL_NTB_SS_HSX:
|
|
case PCI_DEVICE_ID_INTEL_NTB_PS_JSF:
|
|
case PCI_DEVICE_ID_INTEL_NTB_PS_SNB:
|
|
case PCI_DEVICE_ID_INTEL_NTB_PS_IVT:
|
|
case PCI_DEVICE_ID_INTEL_NTB_PS_HSX:
|
|
case PCI_DEVICE_ID_INTEL_NTB_B2B_JSF:
|
|
case PCI_DEVICE_ID_INTEL_NTB_B2B_SNB:
|
|
case PCI_DEVICE_ID_INTEL_NTB_B2B_IVT:
|
|
case PCI_DEVICE_ID_INTEL_NTB_B2B_HSX:
|
|
rc = ntb_xeon_setup(ndev);
|
|
break;
|
|
case PCI_DEVICE_ID_INTEL_NTB_B2B_BWD:
|
|
rc = ntb_bwd_setup(ndev);
|
|
break;
|
|
default:
|
|
rc = -ENODEV;
|
|
}
|
|
|
|
if (rc)
|
|
return rc;
|
|
|
|
dev_info(&ndev->pdev->dev, "Device Type = %s\n",
|
|
ndev->dev_type == NTB_DEV_USD ? "USD/DSP" : "DSD/USP");
|
|
|
|
if (ndev->conn_type == NTB_CONN_B2B)
|
|
/* Enable Bus Master and Memory Space on the secondary side */
|
|
writew(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER,
|
|
ndev->reg_ofs.spci_cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ntb_device_free(struct ntb_device *ndev)
|
|
{
|
|
if (ndev->hw_type == BWD_HW) {
|
|
cancel_delayed_work_sync(&ndev->hb_timer);
|
|
cancel_delayed_work_sync(&ndev->lr_timer);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t bwd_callback_msix_irq(int irq, void *data)
|
|
{
|
|
struct ntb_db_cb *db_cb = data;
|
|
struct ntb_device *ndev = db_cb->ndev;
|
|
unsigned long mask;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
|
|
db_cb->db_num);
|
|
|
|
mask = readw(ndev->reg_ofs.ldb_mask);
|
|
set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
|
|
writew(mask, ndev->reg_ofs.ldb_mask);
|
|
|
|
tasklet_schedule(&db_cb->irq_work);
|
|
|
|
/* No need to check for the specific HB irq, any interrupt means
|
|
* we're connected.
|
|
*/
|
|
ndev->last_ts = jiffies;
|
|
|
|
writeq((u64) 1 << db_cb->db_num, ndev->reg_ofs.ldb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t xeon_callback_msix_irq(int irq, void *data)
|
|
{
|
|
struct ntb_db_cb *db_cb = data;
|
|
struct ntb_device *ndev = db_cb->ndev;
|
|
unsigned long mask;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
|
|
db_cb->db_num);
|
|
|
|
mask = readw(ndev->reg_ofs.ldb_mask);
|
|
set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
|
|
writew(mask, ndev->reg_ofs.ldb_mask);
|
|
|
|
tasklet_schedule(&db_cb->irq_work);
|
|
|
|
/* On Sandybridge, there are 16 bits in the interrupt register
|
|
* but only 4 vectors. So, 5 bits are assigned to the first 3
|
|
* vectors, with the 4th having a single bit for link
|
|
* interrupts.
|
|
*/
|
|
writew(((1 << ndev->bits_per_vector) - 1) <<
|
|
(db_cb->db_num * ndev->bits_per_vector), ndev->reg_ofs.ldb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Since we do not have a HW doorbell in BWD, this is only used in JF/JT */
|
|
static irqreturn_t xeon_event_msix_irq(int irq, void *dev)
|
|
{
|
|
struct ntb_device *ndev = dev;
|
|
int rc;
|
|
|
|
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for Events\n", irq);
|
|
|
|
rc = ntb_link_status(ndev);
|
|
if (rc)
|
|
dev_err(&ndev->pdev->dev, "Error determining link status\n");
|
|
|
|
/* bit 15 is always the link bit */
|
|
writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t ntb_interrupt(int irq, void *dev)
|
|
{
|
|
struct ntb_device *ndev = dev;
|
|
unsigned int i = 0;
|
|
|
|
if (ndev->hw_type == BWD_HW) {
|
|
u64 ldb = readq(ndev->reg_ofs.ldb);
|
|
|
|
dev_dbg(&ndev->pdev->dev, "irq %d - ldb = %Lx\n", irq, ldb);
|
|
|
|
while (ldb) {
|
|
i = __ffs(ldb);
|
|
ldb &= ldb - 1;
|
|
bwd_callback_msix_irq(irq, &ndev->db_cb[i]);
|
|
}
|
|
} else {
|
|
u16 ldb = readw(ndev->reg_ofs.ldb);
|
|
|
|
dev_dbg(&ndev->pdev->dev, "irq %d - ldb = %x\n", irq, ldb);
|
|
|
|
if (ldb & SNB_DB_HW_LINK) {
|
|
xeon_event_msix_irq(irq, dev);
|
|
ldb &= ~SNB_DB_HW_LINK;
|
|
}
|
|
|
|
while (ldb) {
|
|
i = __ffs(ldb);
|
|
ldb &= ldb - 1;
|
|
xeon_callback_msix_irq(irq, &ndev->db_cb[i]);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ntb_setup_msix(struct ntb_device *ndev)
|
|
{
|
|
struct pci_dev *pdev = ndev->pdev;
|
|
struct msix_entry *msix;
|
|
int msix_entries;
|
|
int rc, i;
|
|
u16 val;
|
|
|
|
if (!pdev->msix_cap) {
|
|
rc = -EIO;
|
|
goto err;
|
|
}
|
|
|
|
rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val);
|
|
if (rc)
|
|
goto err;
|
|
|
|
msix_entries = msix_table_size(val);
|
|
if (msix_entries > ndev->limits.msix_cnt) {
|
|
rc = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries,
|
|
GFP_KERNEL);
|
|
if (!ndev->msix_entries) {
|
|
rc = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < msix_entries; i++)
|
|
ndev->msix_entries[i].entry = i;
|
|
|
|
rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
|
|
if (rc < 0)
|
|
goto err1;
|
|
if (rc > 0) {
|
|
/* On SNB, the link interrupt is always tied to 4th vector. If
|
|
* we can't get all 4, then we can't use MSI-X.
|
|
*/
|
|
if (ndev->hw_type != BWD_HW) {
|
|
rc = -EIO;
|
|
goto err1;
|
|
}
|
|
|
|
dev_warn(&pdev->dev,
|
|
"Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
|
|
rc);
|
|
msix_entries = rc;
|
|
|
|
rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
|
|
if (rc)
|
|
goto err1;
|
|
}
|
|
|
|
for (i = 0; i < msix_entries; i++) {
|
|
msix = &ndev->msix_entries[i];
|
|
WARN_ON(!msix->vector);
|
|
|
|
/* Use the last MSI-X vector for Link status */
|
|
if (ndev->hw_type == BWD_HW) {
|
|
rc = request_irq(msix->vector, bwd_callback_msix_irq, 0,
|
|
"ntb-callback-msix", &ndev->db_cb[i]);
|
|
if (rc)
|
|
goto err2;
|
|
} else {
|
|
if (i == msix_entries - 1) {
|
|
rc = request_irq(msix->vector,
|
|
xeon_event_msix_irq, 0,
|
|
"ntb-event-msix", ndev);
|
|
if (rc)
|
|
goto err2;
|
|
} else {
|
|
rc = request_irq(msix->vector,
|
|
xeon_callback_msix_irq, 0,
|
|
"ntb-callback-msix",
|
|
&ndev->db_cb[i]);
|
|
if (rc)
|
|
goto err2;
|
|
}
|
|
}
|
|
}
|
|
|
|
ndev->num_msix = msix_entries;
|
|
if (ndev->hw_type == BWD_HW)
|
|
ndev->max_cbs = msix_entries;
|
|
else
|
|
ndev->max_cbs = msix_entries - 1;
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
while (--i >= 0) {
|
|
msix = &ndev->msix_entries[i];
|
|
if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1)
|
|
free_irq(msix->vector, ndev);
|
|
else
|
|
free_irq(msix->vector, &ndev->db_cb[i]);
|
|
}
|
|
pci_disable_msix(pdev);
|
|
err1:
|
|
kfree(ndev->msix_entries);
|
|
dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n");
|
|
err:
|
|
ndev->num_msix = 0;
|
|
return rc;
|
|
}
|
|
|
|
static int ntb_setup_msi(struct ntb_device *ndev)
|
|
{
|
|
struct pci_dev *pdev = ndev->pdev;
|
|
int rc;
|
|
|
|
rc = pci_enable_msi(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = request_irq(pdev->irq, ntb_interrupt, 0, "ntb-msi", ndev);
|
|
if (rc) {
|
|
pci_disable_msi(pdev);
|
|
dev_err(&pdev->dev, "Error allocating MSI interrupt\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ntb_setup_intx(struct ntb_device *ndev)
|
|
{
|
|
struct pci_dev *pdev = ndev->pdev;
|
|
int rc;
|
|
|
|
pci_msi_off(pdev);
|
|
|
|
/* Verify intx is enabled */
|
|
pci_intx(pdev, 1);
|
|
|
|
rc = request_irq(pdev->irq, ntb_interrupt, IRQF_SHARED, "ntb-intx",
|
|
ndev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ntb_setup_interrupts(struct ntb_device *ndev)
|
|
{
|
|
int rc;
|
|
|
|
/* On BWD, disable all interrupts. On SNB, disable all but Link
|
|
* Interrupt. The rest will be unmasked as callbacks are registered.
|
|
*/
|
|
if (ndev->hw_type == BWD_HW)
|
|
writeq(~0, ndev->reg_ofs.ldb_mask);
|
|
else {
|
|
u16 var = 1 << SNB_LINK_DB;
|
|
writew(~var, ndev->reg_ofs.ldb_mask);
|
|
}
|
|
|
|
rc = ntb_setup_msix(ndev);
|
|
if (!rc)
|
|
goto done;
|
|
|
|
ndev->bits_per_vector = 1;
|
|
ndev->max_cbs = ndev->limits.max_db_bits;
|
|
|
|
rc = ntb_setup_msi(ndev);
|
|
if (!rc)
|
|
goto done;
|
|
|
|
rc = ntb_setup_intx(ndev);
|
|
if (rc) {
|
|
dev_err(&ndev->pdev->dev, "no usable interrupts\n");
|
|
return rc;
|
|
}
|
|
|
|
done:
|
|
return 0;
|
|
}
|
|
|
|
static void ntb_free_interrupts(struct ntb_device *ndev)
|
|
{
|
|
struct pci_dev *pdev = ndev->pdev;
|
|
|
|
/* mask interrupts */
|
|
if (ndev->hw_type == BWD_HW)
|
|
writeq(~0, ndev->reg_ofs.ldb_mask);
|
|
else
|
|
writew(~0, ndev->reg_ofs.ldb_mask);
|
|
|
|
if (ndev->num_msix) {
|
|
struct msix_entry *msix;
|
|
u32 i;
|
|
|
|
for (i = 0; i < ndev->num_msix; i++) {
|
|
msix = &ndev->msix_entries[i];
|
|
if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1)
|
|
free_irq(msix->vector, ndev);
|
|
else
|
|
free_irq(msix->vector, &ndev->db_cb[i]);
|
|
}
|
|
pci_disable_msix(pdev);
|
|
} else {
|
|
free_irq(pdev->irq, ndev);
|
|
|
|
if (pci_dev_msi_enabled(pdev))
|
|
pci_disable_msi(pdev);
|
|
}
|
|
}
|
|
|
|
static int ntb_create_callbacks(struct ntb_device *ndev)
|
|
{
|
|
int i;
|
|
|
|
/* Chicken-egg issue. We won't know how many callbacks are necessary
|
|
* until we see how many MSI-X vectors we get, but these pointers need
|
|
* to be passed into the MSI-X register function. So, we allocate the
|
|
* max, knowing that they might not all be used, to work around this.
|
|
*/
|
|
ndev->db_cb = kcalloc(ndev->limits.max_db_bits,
|
|
sizeof(struct ntb_db_cb),
|
|
GFP_KERNEL);
|
|
if (!ndev->db_cb)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < ndev->limits.max_db_bits; i++) {
|
|
ndev->db_cb[i].db_num = i;
|
|
ndev->db_cb[i].ndev = ndev;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ntb_free_callbacks(struct ntb_device *ndev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ndev->limits.max_db_bits; i++)
|
|
ntb_unregister_db_callback(ndev, i);
|
|
|
|
kfree(ndev->db_cb);
|
|
}
|
|
|
|
static void ntb_setup_debugfs(struct ntb_device *ndev)
|
|
{
|
|
if (!debugfs_initialized())
|
|
return;
|
|
|
|
if (!debugfs_dir)
|
|
debugfs_dir = debugfs_create_dir(KBUILD_MODNAME, NULL);
|
|
|
|
ndev->debugfs_dir = debugfs_create_dir(pci_name(ndev->pdev),
|
|
debugfs_dir);
|
|
}
|
|
|
|
static void ntb_free_debugfs(struct ntb_device *ndev)
|
|
{
|
|
debugfs_remove_recursive(ndev->debugfs_dir);
|
|
|
|
if (debugfs_dir && simple_empty(debugfs_dir)) {
|
|
debugfs_remove_recursive(debugfs_dir);
|
|
debugfs_dir = NULL;
|
|
}
|
|
}
|
|
|
|
static void ntb_hw_link_up(struct ntb_device *ndev)
|
|
{
|
|
if (ndev->conn_type == NTB_CONN_TRANSPARENT)
|
|
ntb_link_event(ndev, NTB_LINK_UP);
|
|
else {
|
|
u32 ntb_cntl;
|
|
|
|
/* Let's bring the NTB link up */
|
|
ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
|
|
ntb_cntl &= ~(NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK);
|
|
ntb_cntl |= NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP;
|
|
ntb_cntl |= NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP;
|
|
writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
|
|
}
|
|
}
|
|
|
|
static void ntb_hw_link_down(struct ntb_device *ndev)
|
|
{
|
|
u32 ntb_cntl;
|
|
|
|
if (ndev->conn_type == NTB_CONN_TRANSPARENT) {
|
|
ntb_link_event(ndev, NTB_LINK_DOWN);
|
|
return;
|
|
}
|
|
|
|
/* Bring NTB link down */
|
|
ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
|
|
ntb_cntl &= ~(NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP);
|
|
ntb_cntl &= ~(NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP);
|
|
ntb_cntl |= NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK;
|
|
writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
|
|
}
|
|
|
|
static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct ntb_device *ndev;
|
|
int rc, i;
|
|
|
|
ndev = kzalloc(sizeof(struct ntb_device), GFP_KERNEL);
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
ndev->pdev = pdev;
|
|
ndev->link_status = NTB_LINK_DOWN;
|
|
pci_set_drvdata(pdev, ndev);
|
|
ntb_setup_debugfs(ndev);
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
goto err;
|
|
|
|
pci_set_master(ndev->pdev);
|
|
|
|
rc = pci_request_selected_regions(pdev, NTB_BAR_MASK, KBUILD_MODNAME);
|
|
if (rc)
|
|
goto err1;
|
|
|
|
ndev->reg_base = pci_ioremap_bar(pdev, NTB_BAR_MMIO);
|
|
if (!ndev->reg_base) {
|
|
dev_warn(&pdev->dev, "Cannot remap BAR 0\n");
|
|
rc = -EIO;
|
|
goto err2;
|
|
}
|
|
|
|
for (i = 0; i < NTB_MAX_NUM_MW; i++) {
|
|
ndev->mw[i].bar_sz = pci_resource_len(pdev, MW_TO_BAR(i));
|
|
ndev->mw[i].vbase =
|
|
ioremap_wc(pci_resource_start(pdev, MW_TO_BAR(i)),
|
|
ndev->mw[i].bar_sz);
|
|
dev_info(&pdev->dev, "MW %d size %llu\n", i,
|
|
(unsigned long long) ndev->mw[i].bar_sz);
|
|
if (!ndev->mw[i].vbase) {
|
|
dev_warn(&pdev->dev, "Cannot remap BAR %d\n",
|
|
MW_TO_BAR(i));
|
|
rc = -EIO;
|
|
goto err3;
|
|
}
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (rc) {
|
|
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (rc)
|
|
goto err3;
|
|
|
|
dev_warn(&pdev->dev, "Cannot DMA highmem\n");
|
|
}
|
|
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (rc)
|
|
goto err3;
|
|
|
|
dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
|
|
}
|
|
|
|
rc = ntb_device_setup(ndev);
|
|
if (rc)
|
|
goto err3;
|
|
|
|
rc = ntb_create_callbacks(ndev);
|
|
if (rc)
|
|
goto err4;
|
|
|
|
rc = ntb_setup_interrupts(ndev);
|
|
if (rc)
|
|
goto err5;
|
|
|
|
/* The scratchpad registers keep the values between rmmod/insmod,
|
|
* blast them now
|
|
*/
|
|
for (i = 0; i < ndev->limits.max_spads; i++) {
|
|
ntb_write_local_spad(ndev, i, 0);
|
|
ntb_write_remote_spad(ndev, i, 0);
|
|
}
|
|
|
|
rc = ntb_transport_init(pdev);
|
|
if (rc)
|
|
goto err6;
|
|
|
|
ntb_hw_link_up(ndev);
|
|
|
|
return 0;
|
|
|
|
err6:
|
|
ntb_free_interrupts(ndev);
|
|
err5:
|
|
ntb_free_callbacks(ndev);
|
|
err4:
|
|
ntb_device_free(ndev);
|
|
err3:
|
|
for (i--; i >= 0; i--)
|
|
iounmap(ndev->mw[i].vbase);
|
|
iounmap(ndev->reg_base);
|
|
err2:
|
|
pci_release_selected_regions(pdev, NTB_BAR_MASK);
|
|
err1:
|
|
pci_disable_device(pdev);
|
|
err:
|
|
ntb_free_debugfs(ndev);
|
|
kfree(ndev);
|
|
|
|
dev_err(&pdev->dev, "Error loading %s module\n", KBUILD_MODNAME);
|
|
return rc;
|
|
}
|
|
|
|
static void ntb_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ntb_device *ndev = pci_get_drvdata(pdev);
|
|
int i;
|
|
|
|
ntb_hw_link_down(ndev);
|
|
|
|
ntb_transport_free(ndev->ntb_transport);
|
|
|
|
ntb_free_interrupts(ndev);
|
|
ntb_free_callbacks(ndev);
|
|
ntb_device_free(ndev);
|
|
|
|
for (i = 0; i < NTB_MAX_NUM_MW; i++)
|
|
iounmap(ndev->mw[i].vbase);
|
|
|
|
iounmap(ndev->reg_base);
|
|
pci_release_selected_regions(pdev, NTB_BAR_MASK);
|
|
pci_disable_device(pdev);
|
|
ntb_free_debugfs(ndev);
|
|
kfree(ndev);
|
|
}
|
|
|
|
static struct pci_driver ntb_pci_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = ntb_pci_tbl,
|
|
.probe = ntb_pci_probe,
|
|
.remove = ntb_pci_remove,
|
|
};
|
|
module_pci_driver(ntb_pci_driver);
|