mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-03 18:36:39 +07:00
86d674a132
Update the documentation, providing an updated list of supported boards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
37 lines
1.0 KiB
Plaintext
37 lines
1.0 KiB
Plaintext
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
|
|
encoder chip:
|
|
|
|
1) Currently supported are:
|
|
|
|
- Hauppauge HVR-1600
|
|
- Compro VideoMate H900
|
|
- Yuan MPC718
|
|
- Conexant Raptor PAL/SECAM devkit
|
|
|
|
2) Some people have problems getting the i2c bus to work.
|
|
The symptom is that the eeprom cannot be read and the card is
|
|
unusable. This is probably fixed, but if you have problems
|
|
then post to the video4linux or ivtv-users mailinglist.
|
|
|
|
3) VBI (raw or sliced) has not yet been implemented.
|
|
|
|
4) MPEG indexing is not yet implemented.
|
|
|
|
5) The driver is still a bit rough around the edges, this should
|
|
improve over time.
|
|
|
|
|
|
Firmware:
|
|
|
|
The firmware needs to be extracted from the Windows Hauppauge HVR-1600
|
|
driver, available here:
|
|
|
|
http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
|
|
|
|
Unzip, then copy the following files to the firmware directory
|
|
and rename them as follows:
|
|
|
|
Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
|
|
Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
|
|
Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
|