mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 09:05:12 +07:00
25a3d6bac6
Commit b2ce5617da
("media: i2c: fix warning same module names")
renamed the adv7511 module in the media tree to adv7511-v4l2.
This patch does the same rename for the driver name and device id to
keep the naming consistent.
Since the cobalt driver loads this module, it had to be renamed there
as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
797 lines
22 KiB
C
797 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* cobalt driver initialization and card probing
|
|
*
|
|
* Derived from cx18-driver.c
|
|
*
|
|
* Copyright 2012-2015 Cisco Systems, Inc. and/or its affiliates.
|
|
* All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <media/i2c/adv7604.h>
|
|
#include <media/i2c/adv7842.h>
|
|
#include <media/i2c/adv7511.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
#include "cobalt-driver.h"
|
|
#include "cobalt-irq.h"
|
|
#include "cobalt-i2c.h"
|
|
#include "cobalt-v4l2.h"
|
|
#include "cobalt-flash.h"
|
|
#include "cobalt-alsa.h"
|
|
#include "cobalt-omnitek.h"
|
|
|
|
/* add your revision and whatnot here */
|
|
static const struct pci_device_id cobalt_pci_tbl[] = {
|
|
{PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_COBALT,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, cobalt_pci_tbl);
|
|
|
|
static atomic_t cobalt_instance = ATOMIC_INIT(0);
|
|
|
|
int cobalt_debug;
|
|
module_param_named(debug, cobalt_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Debug level. Default: 0\n");
|
|
|
|
int cobalt_ignore_err;
|
|
module_param_named(ignore_err, cobalt_ignore_err, int, 0644);
|
|
MODULE_PARM_DESC(ignore_err,
|
|
"If set then ignore missing i2c adapters/receivers. Default: 0\n");
|
|
|
|
MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com> & Morten Hestnes");
|
|
MODULE_DESCRIPTION("cobalt driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static u8 edid[256] = {
|
|
0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
|
|
0x50, 0x21, 0x32, 0x27, 0x00, 0x00, 0x00, 0x00,
|
|
0x22, 0x1a, 0x01, 0x03, 0x80, 0x30, 0x1b, 0x78,
|
|
0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26,
|
|
0x0f, 0x50, 0x54, 0x2f, 0xcf, 0x00, 0x31, 0x59,
|
|
0x45, 0x59, 0x61, 0x59, 0x81, 0x99, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a,
|
|
0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c,
|
|
0x46, 0x00, 0xe0, 0x0e, 0x11, 0x00, 0x00, 0x1e,
|
|
0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18,
|
|
0x5e, 0x11, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20,
|
|
0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x63,
|
|
0x6f, 0x62, 0x61, 0x6c, 0x74, 0x0a, 0x20, 0x20,
|
|
0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x10,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x9c,
|
|
|
|
0x02, 0x03, 0x1f, 0xf0, 0x4a, 0x90, 0x1f, 0x04,
|
|
0x13, 0x22, 0x21, 0x20, 0x02, 0x11, 0x01, 0x23,
|
|
0x09, 0x07, 0x07, 0x68, 0x03, 0x0c, 0x00, 0x10,
|
|
0x00, 0x00, 0x22, 0x0f, 0xe2, 0x00, 0xea, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7,
|
|
};
|
|
|
|
static void cobalt_set_interrupt(struct cobalt *cobalt, bool enable)
|
|
{
|
|
if (enable) {
|
|
unsigned irqs = COBALT_SYSSTAT_VI0_INT1_MSK |
|
|
COBALT_SYSSTAT_VI1_INT1_MSK |
|
|
COBALT_SYSSTAT_VI2_INT1_MSK |
|
|
COBALT_SYSSTAT_VI3_INT1_MSK |
|
|
COBALT_SYSSTAT_VI0_INT2_MSK |
|
|
COBALT_SYSSTAT_VI1_INT2_MSK |
|
|
COBALT_SYSSTAT_VI2_INT2_MSK |
|
|
COBALT_SYSSTAT_VI3_INT2_MSK |
|
|
COBALT_SYSSTAT_VI0_LOST_DATA_MSK |
|
|
COBALT_SYSSTAT_VI1_LOST_DATA_MSK |
|
|
COBALT_SYSSTAT_VI2_LOST_DATA_MSK |
|
|
COBALT_SYSSTAT_VI3_LOST_DATA_MSK |
|
|
COBALT_SYSSTAT_AUD_IN_LOST_DATA_MSK;
|
|
|
|
if (cobalt->have_hsma_rx)
|
|
irqs |= COBALT_SYSSTAT_VIHSMA_INT1_MSK |
|
|
COBALT_SYSSTAT_VIHSMA_INT2_MSK |
|
|
COBALT_SYSSTAT_VIHSMA_LOST_DATA_MSK;
|
|
|
|
if (cobalt->have_hsma_tx)
|
|
irqs |= COBALT_SYSSTAT_VOHSMA_INT1_MSK |
|
|
COBALT_SYSSTAT_VOHSMA_LOST_DATA_MSK |
|
|
COBALT_SYSSTAT_AUD_OUT_LOST_DATA_MSK;
|
|
/* Clear any existing interrupts */
|
|
cobalt_write_bar1(cobalt, COBALT_SYS_STAT_EDGE, 0xffffffff);
|
|
/* PIO Core interrupt mask register.
|
|
Enable ADV7604 INT1 interrupts */
|
|
cobalt_write_bar1(cobalt, COBALT_SYS_STAT_MASK, irqs);
|
|
} else {
|
|
/* Disable all ADV7604 interrupts */
|
|
cobalt_write_bar1(cobalt, COBALT_SYS_STAT_MASK, 0);
|
|
}
|
|
}
|
|
|
|
static unsigned cobalt_get_sd_nr(struct v4l2_subdev *sd)
|
|
{
|
|
struct cobalt *cobalt = to_cobalt(sd->v4l2_dev);
|
|
unsigned i;
|
|
|
|
for (i = 0; i < COBALT_NUM_NODES; i++)
|
|
if (sd == cobalt->streams[i].sd)
|
|
return i;
|
|
cobalt_err("Invalid adv7604 subdev pointer!\n");
|
|
return 0;
|
|
}
|
|
|
|
static void cobalt_notify(struct v4l2_subdev *sd,
|
|
unsigned int notification, void *arg)
|
|
{
|
|
struct cobalt *cobalt = to_cobalt(sd->v4l2_dev);
|
|
unsigned sd_nr = cobalt_get_sd_nr(sd);
|
|
struct cobalt_stream *s = &cobalt->streams[sd_nr];
|
|
bool hotplug = arg ? *((int *)arg) : false;
|
|
|
|
if (s->is_output)
|
|
return;
|
|
|
|
switch (notification) {
|
|
case ADV76XX_HOTPLUG:
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_HPD_TO_CONNECTOR_BIT(sd_nr), hotplug);
|
|
cobalt_dbg(1, "Set hotplug for adv %d to %d\n", sd_nr, hotplug);
|
|
break;
|
|
case V4L2_DEVICE_NOTIFY_EVENT:
|
|
cobalt_dbg(1, "Format changed for adv %d\n", sd_nr);
|
|
v4l2_event_queue(&s->vdev, arg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int get_payload_size(u16 code)
|
|
{
|
|
switch (code) {
|
|
case 0: return 128;
|
|
case 1: return 256;
|
|
case 2: return 512;
|
|
case 3: return 1024;
|
|
case 4: return 2048;
|
|
case 5: return 4096;
|
|
default: return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const char *get_link_speed(u16 stat)
|
|
{
|
|
switch (stat & PCI_EXP_LNKSTA_CLS) {
|
|
case 1: return "2.5 Gbit/s";
|
|
case 2: return "5 Gbit/s";
|
|
case 3: return "10 Gbit/s";
|
|
}
|
|
return "Unknown speed";
|
|
}
|
|
|
|
void cobalt_pcie_status_show(struct cobalt *cobalt)
|
|
{
|
|
struct pci_dev *pci_dev = cobalt->pci_dev;
|
|
struct pci_dev *pci_bus_dev = cobalt->pci_dev->bus->self;
|
|
u32 capa;
|
|
u16 stat, ctrl;
|
|
|
|
if (!pci_is_pcie(pci_dev) || !pci_is_pcie(pci_bus_dev))
|
|
return;
|
|
|
|
/* Device */
|
|
pcie_capability_read_dword(pci_dev, PCI_EXP_DEVCAP, &capa);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_DEVCTL, &ctrl);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_DEVSTA, &stat);
|
|
cobalt_info("PCIe device capability 0x%08x: Max payload %d\n",
|
|
capa, get_payload_size(capa & PCI_EXP_DEVCAP_PAYLOAD));
|
|
cobalt_info("PCIe device control 0x%04x: Max payload %d. Max read request %d\n",
|
|
ctrl,
|
|
get_payload_size((ctrl & PCI_EXP_DEVCTL_PAYLOAD) >> 5),
|
|
get_payload_size((ctrl & PCI_EXP_DEVCTL_READRQ) >> 12));
|
|
cobalt_info("PCIe device status 0x%04x\n", stat);
|
|
|
|
/* Link */
|
|
pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &capa);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_LNKCTL, &ctrl);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &stat);
|
|
cobalt_info("PCIe link capability 0x%08x: %s per lane and %u lanes\n",
|
|
capa, get_link_speed(capa),
|
|
(capa & PCI_EXP_LNKCAP_MLW) >> 4);
|
|
cobalt_info("PCIe link control 0x%04x\n", ctrl);
|
|
cobalt_info("PCIe link status 0x%04x: %s per lane and %u lanes\n",
|
|
stat, get_link_speed(stat),
|
|
(stat & PCI_EXP_LNKSTA_NLW) >> 4);
|
|
|
|
/* Bus */
|
|
pcie_capability_read_dword(pci_bus_dev, PCI_EXP_LNKCAP, &capa);
|
|
cobalt_info("PCIe bus link capability 0x%08x: %s per lane and %u lanes\n",
|
|
capa, get_link_speed(capa),
|
|
(capa & PCI_EXP_LNKCAP_MLW) >> 4);
|
|
|
|
/* Slot */
|
|
pcie_capability_read_dword(pci_dev, PCI_EXP_SLTCAP, &capa);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_SLTCTL, &ctrl);
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_SLTSTA, &stat);
|
|
cobalt_info("PCIe slot capability 0x%08x\n", capa);
|
|
cobalt_info("PCIe slot control 0x%04x\n", ctrl);
|
|
cobalt_info("PCIe slot status 0x%04x\n", stat);
|
|
}
|
|
|
|
static unsigned pcie_link_get_lanes(struct cobalt *cobalt)
|
|
{
|
|
struct pci_dev *pci_dev = cobalt->pci_dev;
|
|
u16 link;
|
|
|
|
if (!pci_is_pcie(pci_dev))
|
|
return 0;
|
|
pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &link);
|
|
return (link & PCI_EXP_LNKSTA_NLW) >> 4;
|
|
}
|
|
|
|
static unsigned pcie_bus_link_get_lanes(struct cobalt *cobalt)
|
|
{
|
|
struct pci_dev *pci_dev = cobalt->pci_dev->bus->self;
|
|
u32 link;
|
|
|
|
if (!pci_is_pcie(pci_dev))
|
|
return 0;
|
|
pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &link);
|
|
return (link & PCI_EXP_LNKCAP_MLW) >> 4;
|
|
}
|
|
|
|
static void msi_config_show(struct cobalt *cobalt, struct pci_dev *pci_dev)
|
|
{
|
|
u16 ctrl, data;
|
|
u32 adrs_l, adrs_h;
|
|
|
|
pci_read_config_word(pci_dev, 0x52, &ctrl);
|
|
cobalt_info("MSI %s\n", ctrl & 1 ? "enable" : "disable");
|
|
cobalt_info("MSI multiple message: Capable %u. Enable %u\n",
|
|
(1 << ((ctrl >> 1) & 7)), (1 << ((ctrl >> 4) & 7)));
|
|
if (ctrl & 0x80)
|
|
cobalt_info("MSI: 64-bit address capable\n");
|
|
pci_read_config_dword(pci_dev, 0x54, &adrs_l);
|
|
pci_read_config_dword(pci_dev, 0x58, &adrs_h);
|
|
pci_read_config_word(pci_dev, 0x5c, &data);
|
|
if (ctrl & 0x80)
|
|
cobalt_info("MSI: Address 0x%08x%08x. Data 0x%04x\n",
|
|
adrs_h, adrs_l, data);
|
|
else
|
|
cobalt_info("MSI: Address 0x%08x. Data 0x%04x\n",
|
|
adrs_l, data);
|
|
}
|
|
|
|
static void cobalt_pci_iounmap(struct cobalt *cobalt, struct pci_dev *pci_dev)
|
|
{
|
|
if (cobalt->bar0) {
|
|
pci_iounmap(pci_dev, cobalt->bar0);
|
|
cobalt->bar0 = NULL;
|
|
}
|
|
if (cobalt->bar1) {
|
|
pci_iounmap(pci_dev, cobalt->bar1);
|
|
cobalt->bar1 = NULL;
|
|
}
|
|
}
|
|
|
|
static void cobalt_free_msi(struct cobalt *cobalt, struct pci_dev *pci_dev)
|
|
{
|
|
free_irq(pci_dev->irq, (void *)cobalt);
|
|
pci_free_irq_vectors(pci_dev);
|
|
}
|
|
|
|
static int cobalt_setup_pci(struct cobalt *cobalt, struct pci_dev *pci_dev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
u32 ctrl;
|
|
int ret;
|
|
|
|
cobalt_dbg(1, "enabling pci device\n");
|
|
|
|
ret = pci_enable_device(pci_dev);
|
|
if (ret) {
|
|
cobalt_err("can't enable device\n");
|
|
return ret;
|
|
}
|
|
pci_set_master(pci_dev);
|
|
pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &cobalt->card_rev);
|
|
pci_read_config_word(pci_dev, PCI_DEVICE_ID, &cobalt->device_id);
|
|
|
|
switch (cobalt->device_id) {
|
|
case PCI_DEVICE_ID_COBALT:
|
|
cobalt_info("PCI Express interface from Omnitek\n");
|
|
break;
|
|
default:
|
|
cobalt_info("PCI Express interface provider is unknown!\n");
|
|
break;
|
|
}
|
|
|
|
if (pcie_link_get_lanes(cobalt) != 8) {
|
|
cobalt_warn("PCI Express link width is %d lanes.\n",
|
|
pcie_link_get_lanes(cobalt));
|
|
if (pcie_bus_link_get_lanes(cobalt) < 8)
|
|
cobalt_warn("The current slot only supports %d lanes, for best performance 8 are needed\n",
|
|
pcie_bus_link_get_lanes(cobalt));
|
|
if (pcie_link_get_lanes(cobalt) != pcie_bus_link_get_lanes(cobalt)) {
|
|
cobalt_err("The card is most likely not seated correctly in the PCIe slot\n");
|
|
ret = -EIO;
|
|
goto err_disable;
|
|
}
|
|
}
|
|
|
|
if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) {
|
|
ret = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
cobalt_err("no suitable DMA available\n");
|
|
goto err_disable;
|
|
}
|
|
}
|
|
|
|
ret = pci_request_regions(pci_dev, "cobalt");
|
|
if (ret) {
|
|
cobalt_err("error requesting regions\n");
|
|
goto err_disable;
|
|
}
|
|
|
|
cobalt_pcie_status_show(cobalt);
|
|
|
|
cobalt->bar0 = pci_iomap(pci_dev, 0, 0);
|
|
cobalt->bar1 = pci_iomap(pci_dev, 1, 0);
|
|
if (cobalt->bar1 == NULL) {
|
|
cobalt->bar1 = pci_iomap(pci_dev, 2, 0);
|
|
cobalt_info("64-bit BAR\n");
|
|
}
|
|
if (!cobalt->bar0 || !cobalt->bar1) {
|
|
ret = -EIO;
|
|
goto err_release;
|
|
}
|
|
|
|
/* Reset the video inputs before enabling any interrupts */
|
|
ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
|
|
cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE, ctrl & ~0xf00);
|
|
|
|
/* Disable interrupts to prevent any spurious interrupts
|
|
from being generated. */
|
|
cobalt_set_interrupt(cobalt, false);
|
|
|
|
if (pci_alloc_irq_vectors(pci_dev, 1, 1, PCI_IRQ_MSI) < 1) {
|
|
cobalt_err("Could not enable MSI\n");
|
|
ret = -EIO;
|
|
goto err_release;
|
|
}
|
|
msi_config_show(cobalt, pci_dev);
|
|
|
|
/* Register IRQ */
|
|
if (request_irq(pci_dev->irq, cobalt_irq_handler, IRQF_SHARED,
|
|
cobalt->v4l2_dev.name, (void *)cobalt)) {
|
|
cobalt_err("Failed to register irq %d\n", pci_dev->irq);
|
|
ret = -EIO;
|
|
goto err_msi;
|
|
}
|
|
|
|
omni_sg_dma_init(cobalt);
|
|
return 0;
|
|
|
|
err_msi:
|
|
pci_disable_msi(pci_dev);
|
|
|
|
err_release:
|
|
cobalt_pci_iounmap(cobalt, pci_dev);
|
|
pci_release_regions(pci_dev);
|
|
|
|
err_disable:
|
|
pci_disable_device(cobalt->pci_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int cobalt_hdl_info_get(struct cobalt *cobalt)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < COBALT_HDL_INFO_SIZE; i++)
|
|
cobalt->hdl_info[i] =
|
|
ioread8(cobalt->bar1 + COBALT_HDL_INFO_BASE + i);
|
|
cobalt->hdl_info[COBALT_HDL_INFO_SIZE - 1] = '\0';
|
|
if (strstr(cobalt->hdl_info, COBALT_HDL_SEARCH_STR))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void cobalt_stream_struct_init(struct cobalt *cobalt)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < COBALT_NUM_STREAMS; i++) {
|
|
struct cobalt_stream *s = &cobalt->streams[i];
|
|
|
|
s->cobalt = cobalt;
|
|
s->flags = 0;
|
|
s->is_audio = false;
|
|
s->is_output = false;
|
|
s->is_dummy = true;
|
|
|
|
/* The Memory DMA channels will always get a lower channel
|
|
* number than the FIFO DMA. Video input should map to the
|
|
* stream 0-3. The other can use stream struct from 4 and
|
|
* higher */
|
|
if (i <= COBALT_HSMA_IN_NODE) {
|
|
s->dma_channel = i + cobalt->first_fifo_channel;
|
|
s->video_channel = i;
|
|
s->dma_fifo_mask =
|
|
COBALT_SYSSTAT_VI0_LOST_DATA_MSK << (4 * i);
|
|
s->adv_irq_mask =
|
|
COBALT_SYSSTAT_VI0_INT1_MSK << (4 * i);
|
|
} else if (i >= COBALT_AUDIO_IN_STREAM &&
|
|
i <= COBALT_AUDIO_IN_STREAM + 4) {
|
|
unsigned idx = i - COBALT_AUDIO_IN_STREAM;
|
|
|
|
s->dma_channel = 6 + idx;
|
|
s->is_audio = true;
|
|
s->video_channel = idx;
|
|
s->dma_fifo_mask = COBALT_SYSSTAT_AUD_IN_LOST_DATA_MSK;
|
|
} else if (i == COBALT_HSMA_OUT_NODE) {
|
|
s->dma_channel = 11;
|
|
s->is_output = true;
|
|
s->video_channel = 5;
|
|
s->dma_fifo_mask = COBALT_SYSSTAT_VOHSMA_LOST_DATA_MSK;
|
|
s->adv_irq_mask = COBALT_SYSSTAT_VOHSMA_INT1_MSK;
|
|
} else if (i == COBALT_AUDIO_OUT_STREAM) {
|
|
s->dma_channel = 12;
|
|
s->is_audio = true;
|
|
s->is_output = true;
|
|
s->video_channel = 5;
|
|
s->dma_fifo_mask = COBALT_SYSSTAT_AUD_OUT_LOST_DATA_MSK;
|
|
} else {
|
|
/* FIXME: Memory DMA for debug purpose */
|
|
s->dma_channel = i - COBALT_NUM_NODES;
|
|
}
|
|
cobalt_info("stream #%d -> dma channel #%d <- video channel %d\n",
|
|
i, s->dma_channel, s->video_channel);
|
|
}
|
|
}
|
|
|
|
static int cobalt_subdevs_init(struct cobalt *cobalt)
|
|
{
|
|
static struct adv76xx_platform_data adv7604_pdata = {
|
|
.disable_pwrdnb = 1,
|
|
.ain_sel = ADV7604_AIN7_8_9_NC_SYNC_3_1,
|
|
.bus_order = ADV7604_BUS_ORDER_BRG,
|
|
.blank_data = 1,
|
|
.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0,
|
|
.int1_config = ADV76XX_INT1_CONFIG_ACTIVE_HIGH,
|
|
.dr_str_data = ADV76XX_DR_STR_HIGH,
|
|
.dr_str_clk = ADV76XX_DR_STR_HIGH,
|
|
.dr_str_sync = ADV76XX_DR_STR_HIGH,
|
|
.hdmi_free_run_mode = 1,
|
|
.inv_vs_pol = 1,
|
|
.inv_hs_pol = 1,
|
|
};
|
|
static struct i2c_board_info adv7604_info = {
|
|
.type = "adv7604",
|
|
.addr = 0x20,
|
|
.platform_data = &adv7604_pdata,
|
|
};
|
|
|
|
struct cobalt_stream *s = cobalt->streams;
|
|
int i;
|
|
|
|
for (i = 0; i < COBALT_NUM_INPUTS; i++) {
|
|
struct v4l2_subdev_format sd_fmt = {
|
|
.pad = ADV7604_PAD_SOURCE,
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.format.code = MEDIA_BUS_FMT_YUYV8_1X16,
|
|
};
|
|
struct v4l2_subdev_edid cobalt_edid = {
|
|
.pad = ADV76XX_PAD_HDMI_PORT_A,
|
|
.start_block = 0,
|
|
.blocks = 2,
|
|
.edid = edid,
|
|
};
|
|
int err;
|
|
|
|
s[i].pad_source = ADV7604_PAD_SOURCE;
|
|
s[i].i2c_adap = &cobalt->i2c_adap[i];
|
|
if (s[i].i2c_adap->dev.parent == NULL)
|
|
continue;
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(i), 1);
|
|
s[i].sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev,
|
|
s[i].i2c_adap, &adv7604_info, NULL);
|
|
if (!s[i].sd) {
|
|
if (cobalt_ignore_err)
|
|
continue;
|
|
return -ENODEV;
|
|
}
|
|
err = v4l2_subdev_call(s[i].sd, video, s_routing,
|
|
ADV76XX_PAD_HDMI_PORT_A, 0, 0);
|
|
if (err)
|
|
return err;
|
|
err = v4l2_subdev_call(s[i].sd, pad, set_edid,
|
|
&cobalt_edid);
|
|
if (err)
|
|
return err;
|
|
err = v4l2_subdev_call(s[i].sd, pad, set_fmt, NULL,
|
|
&sd_fmt);
|
|
if (err)
|
|
return err;
|
|
/* Reset channel video module */
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(i), 0);
|
|
mdelay(2);
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(i), 1);
|
|
mdelay(1);
|
|
s[i].is_dummy = false;
|
|
cobalt->streams[i + COBALT_AUDIO_IN_STREAM].is_dummy = false;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cobalt_subdevs_hsma_init(struct cobalt *cobalt)
|
|
{
|
|
static struct adv7842_platform_data adv7842_pdata = {
|
|
.disable_pwrdnb = 1,
|
|
.ain_sel = ADV7842_AIN1_2_3_NC_SYNC_1_2,
|
|
.bus_order = ADV7842_BUS_ORDER_RBG,
|
|
.op_format_mode_sel = ADV7842_OP_FORMAT_MODE0,
|
|
.blank_data = 1,
|
|
.dr_str_data = 3,
|
|
.dr_str_clk = 3,
|
|
.dr_str_sync = 3,
|
|
.mode = ADV7842_MODE_HDMI,
|
|
.hdmi_free_run_enable = 1,
|
|
.vid_std_select = ADV7842_HDMI_COMP_VID_STD_HD_1250P,
|
|
.i2c_sdp_io = 0x4a,
|
|
.i2c_sdp = 0x48,
|
|
.i2c_cp = 0x22,
|
|
.i2c_vdp = 0x24,
|
|
.i2c_afe = 0x26,
|
|
.i2c_hdmi = 0x34,
|
|
.i2c_repeater = 0x32,
|
|
.i2c_edid = 0x36,
|
|
.i2c_infoframe = 0x3e,
|
|
.i2c_cec = 0x40,
|
|
.i2c_avlink = 0x42,
|
|
};
|
|
static struct i2c_board_info adv7842_info = {
|
|
.type = "adv7842",
|
|
.addr = 0x20,
|
|
.platform_data = &adv7842_pdata,
|
|
};
|
|
static struct v4l2_subdev_format sd_fmt = {
|
|
.pad = ADV7842_PAD_SOURCE,
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.format.code = MEDIA_BUS_FMT_YUYV8_1X16,
|
|
};
|
|
static struct adv7511_platform_data adv7511_pdata = {
|
|
.i2c_edid = 0x7e >> 1,
|
|
.i2c_cec = 0x7c >> 1,
|
|
.i2c_pktmem = 0x70 >> 1,
|
|
.cec_clk = 12000000,
|
|
};
|
|
static struct i2c_board_info adv7511_info = {
|
|
.type = "adv7511-v4l2",
|
|
.addr = 0x39, /* 0x39 or 0x3d */
|
|
.platform_data = &adv7511_pdata,
|
|
};
|
|
struct v4l2_subdev_edid cobalt_edid = {
|
|
.pad = ADV7842_EDID_PORT_A,
|
|
.start_block = 0,
|
|
.blocks = 2,
|
|
.edid = edid,
|
|
};
|
|
struct cobalt_stream *s = &cobalt->streams[COBALT_HSMA_IN_NODE];
|
|
|
|
s->i2c_adap = &cobalt->i2c_adap[COBALT_NUM_ADAPTERS - 1];
|
|
if (s->i2c_adap->dev.parent == NULL)
|
|
return 0;
|
|
cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(4), 1);
|
|
|
|
s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev,
|
|
s->i2c_adap, &adv7842_info, NULL);
|
|
if (s->sd) {
|
|
int err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid);
|
|
|
|
if (err)
|
|
return err;
|
|
err = v4l2_subdev_call(s->sd, pad, set_fmt, NULL,
|
|
&sd_fmt);
|
|
if (err)
|
|
return err;
|
|
cobalt->have_hsma_rx = true;
|
|
s->pad_source = ADV7842_PAD_SOURCE;
|
|
s->is_dummy = false;
|
|
cobalt->streams[4 + COBALT_AUDIO_IN_STREAM].is_dummy = false;
|
|
/* Reset channel video module */
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 0);
|
|
mdelay(2);
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 1);
|
|
mdelay(1);
|
|
return err;
|
|
}
|
|
cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(4), 0);
|
|
cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_PWRDN0_TO_HSMA_TX_BIT, 0);
|
|
s++;
|
|
s->i2c_adap = &cobalt->i2c_adap[COBALT_NUM_ADAPTERS - 1];
|
|
s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev,
|
|
s->i2c_adap, &adv7511_info, NULL);
|
|
if (s->sd) {
|
|
/* A transmitter is hooked up, so we can set this bit */
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 1);
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 0);
|
|
cobalt_s_bit_sysctrl(cobalt,
|
|
COBALT_SYS_CTRL_VIDEO_TX_RESETN_BIT, 1);
|
|
cobalt->have_hsma_tx = true;
|
|
v4l2_subdev_call(s->sd, core, s_power, 1);
|
|
v4l2_subdev_call(s->sd, video, s_stream, 1);
|
|
v4l2_subdev_call(s->sd, audio, s_stream, 1);
|
|
v4l2_ctrl_s_ctrl(v4l2_ctrl_find(s->sd->ctrl_handler,
|
|
V4L2_CID_DV_TX_MODE), V4L2_DV_TX_MODE_HDMI);
|
|
s->is_dummy = false;
|
|
cobalt->streams[COBALT_AUDIO_OUT_STREAM].is_dummy = false;
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int cobalt_probe(struct pci_dev *pci_dev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct cobalt *cobalt;
|
|
int retval = 0;
|
|
int i;
|
|
|
|
/* FIXME - module parameter arrays constrain max instances */
|
|
i = atomic_inc_return(&cobalt_instance) - 1;
|
|
|
|
cobalt = kzalloc(sizeof(struct cobalt), GFP_KERNEL);
|
|
if (cobalt == NULL)
|
|
return -ENOMEM;
|
|
cobalt->pci_dev = pci_dev;
|
|
cobalt->instance = i;
|
|
|
|
retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev);
|
|
if (retval) {
|
|
pr_err("cobalt: v4l2_device_register of card %d failed\n",
|
|
cobalt->instance);
|
|
kfree(cobalt);
|
|
return retval;
|
|
}
|
|
snprintf(cobalt->v4l2_dev.name, sizeof(cobalt->v4l2_dev.name),
|
|
"cobalt-%d", cobalt->instance);
|
|
cobalt->v4l2_dev.notify = cobalt_notify;
|
|
cobalt_info("Initializing card %d\n", cobalt->instance);
|
|
|
|
cobalt->irq_work_queues =
|
|
create_singlethread_workqueue(cobalt->v4l2_dev.name);
|
|
if (cobalt->irq_work_queues == NULL) {
|
|
cobalt_err("Could not create workqueue\n");
|
|
retval = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
INIT_WORK(&cobalt->irq_work_queue, cobalt_irq_work_handler);
|
|
|
|
/* PCI Device Setup */
|
|
retval = cobalt_setup_pci(cobalt, pci_dev, pci_id);
|
|
if (retval != 0)
|
|
goto err_wq;
|
|
|
|
/* Show HDL version info */
|
|
if (cobalt_hdl_info_get(cobalt))
|
|
cobalt_info("Not able to read the HDL info\n");
|
|
else
|
|
cobalt_info("%s", cobalt->hdl_info);
|
|
|
|
retval = cobalt_i2c_init(cobalt);
|
|
if (retval)
|
|
goto err_pci;
|
|
|
|
cobalt_stream_struct_init(cobalt);
|
|
|
|
retval = cobalt_subdevs_init(cobalt);
|
|
if (retval)
|
|
goto err_i2c;
|
|
|
|
if (!(cobalt_read_bar1(cobalt, COBALT_SYS_STAT_BASE) &
|
|
COBALT_SYSSTAT_HSMA_PRSNTN_MSK)) {
|
|
retval = cobalt_subdevs_hsma_init(cobalt);
|
|
if (retval)
|
|
goto err_i2c;
|
|
}
|
|
|
|
retval = cobalt_nodes_register(cobalt);
|
|
if (retval) {
|
|
cobalt_err("Error %d registering device nodes\n", retval);
|
|
goto err_i2c;
|
|
}
|
|
cobalt_set_interrupt(cobalt, true);
|
|
v4l2_device_call_all(&cobalt->v4l2_dev, 0, core,
|
|
interrupt_service_routine, 0, NULL);
|
|
|
|
cobalt_info("Initialized cobalt card\n");
|
|
|
|
cobalt_flash_probe(cobalt);
|
|
|
|
return 0;
|
|
|
|
err_i2c:
|
|
cobalt_i2c_exit(cobalt);
|
|
cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 0);
|
|
err_pci:
|
|
cobalt_free_msi(cobalt, pci_dev);
|
|
cobalt_pci_iounmap(cobalt, pci_dev);
|
|
pci_release_regions(cobalt->pci_dev);
|
|
pci_disable_device(cobalt->pci_dev);
|
|
err_wq:
|
|
destroy_workqueue(cobalt->irq_work_queues);
|
|
err:
|
|
cobalt_err("error %d on initialization\n", retval);
|
|
|
|
v4l2_device_unregister(&cobalt->v4l2_dev);
|
|
kfree(cobalt);
|
|
return retval;
|
|
}
|
|
|
|
static void cobalt_remove(struct pci_dev *pci_dev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
|
|
struct cobalt *cobalt = to_cobalt(v4l2_dev);
|
|
int i;
|
|
|
|
cobalt_flash_remove(cobalt);
|
|
cobalt_set_interrupt(cobalt, false);
|
|
flush_workqueue(cobalt->irq_work_queues);
|
|
cobalt_nodes_unregister(cobalt);
|
|
for (i = 0; i < COBALT_NUM_ADAPTERS; i++) {
|
|
struct v4l2_subdev *sd = cobalt->streams[i].sd;
|
|
struct i2c_client *client;
|
|
|
|
if (sd == NULL)
|
|
continue;
|
|
client = v4l2_get_subdevdata(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
i2c_unregister_device(client);
|
|
}
|
|
cobalt_i2c_exit(cobalt);
|
|
cobalt_free_msi(cobalt, pci_dev);
|
|
cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 0);
|
|
cobalt_pci_iounmap(cobalt, pci_dev);
|
|
pci_release_regions(cobalt->pci_dev);
|
|
pci_disable_device(cobalt->pci_dev);
|
|
destroy_workqueue(cobalt->irq_work_queues);
|
|
|
|
cobalt_info("removed cobalt card\n");
|
|
|
|
v4l2_device_unregister(v4l2_dev);
|
|
kfree(cobalt);
|
|
}
|
|
|
|
/* define a pci_driver for card detection */
|
|
static struct pci_driver cobalt_pci_driver = {
|
|
.name = "cobalt",
|
|
.id_table = cobalt_pci_tbl,
|
|
.probe = cobalt_probe,
|
|
.remove = cobalt_remove,
|
|
};
|
|
|
|
module_pci_driver(cobalt_pci_driver);
|