mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 21:15:44 +07:00
504871e602
Section 11.23.1 of 80211-2016 specification allows TDLS peers to operate on wider bandwidths though they are connected to a BSS which do not support wider bandwidth operations, provided both the peers advertise wider bandwidth capabilities. The existing logic considers the minimum of station's and AP's capability for bandwidth computation. The same logic applies for TDLS peers as well, this restricts operating on wider bandwidths over a TDLS link when the peers are connected to legacy APs. As an example, if 80Mhz VHT capable peers are connected to a 20Mhz 5 GHz AP, then as per the existing logic TDLS operation will be restricted to 20Mhz. Address this problem by not considering BSS capability in bandwidth computation if the participating TDLS peers have wider bandwidth capability. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> [lots of wording/typo fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
567 lines
17 KiB
C
567 lines
17 KiB
C
/*
|
|
* VHT handling
|
|
*
|
|
* Portions of this file
|
|
* Copyright(c) 2015 - 2016 Intel Deutschland GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/ieee80211.h>
|
|
#include <linux/export.h>
|
|
#include <net/mac80211.h>
|
|
#include "ieee80211_i.h"
|
|
#include "rate.h"
|
|
|
|
|
|
static void __check_vhtcap_disable(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_sta_vht_cap *vht_cap,
|
|
u32 flag)
|
|
{
|
|
__le32 le_flag = cpu_to_le32(flag);
|
|
|
|
if (sdata->u.mgd.vht_capa_mask.vht_cap_info & le_flag &&
|
|
!(sdata->u.mgd.vht_capa.vht_cap_info & le_flag))
|
|
vht_cap->cap &= ~flag;
|
|
}
|
|
|
|
void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_sta_vht_cap *vht_cap)
|
|
{
|
|
int i;
|
|
u16 rxmcs_mask, rxmcs_cap, rxmcs_n, txmcs_mask, txmcs_cap, txmcs_n;
|
|
|
|
if (!vht_cap->vht_supported)
|
|
return;
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_STATION)
|
|
return;
|
|
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_RXLDPC);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_SHORT_GI_80);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_SHORT_GI_160);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_TXSTBC);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN);
|
|
__check_vhtcap_disable(sdata, vht_cap,
|
|
IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN);
|
|
|
|
/* Allow user to decrease AMPDU length exponent */
|
|
if (sdata->u.mgd.vht_capa_mask.vht_cap_info &
|
|
cpu_to_le32(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK)) {
|
|
u32 cap, n;
|
|
|
|
n = le32_to_cpu(sdata->u.mgd.vht_capa.vht_cap_info) &
|
|
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
|
|
n >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
|
|
cap = vht_cap->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
|
|
cap >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
|
|
|
|
if (n < cap) {
|
|
vht_cap->cap &=
|
|
~IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
|
|
vht_cap->cap |=
|
|
n << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
|
|
}
|
|
}
|
|
|
|
/* Allow the user to decrease MCSes */
|
|
rxmcs_mask =
|
|
le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.rx_mcs_map);
|
|
rxmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.rx_mcs_map);
|
|
rxmcs_n &= rxmcs_mask;
|
|
rxmcs_cap = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
|
|
|
|
txmcs_mask =
|
|
le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.tx_mcs_map);
|
|
txmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.tx_mcs_map);
|
|
txmcs_n &= txmcs_mask;
|
|
txmcs_cap = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
|
|
for (i = 0; i < 8; i++) {
|
|
u8 m, n, c;
|
|
|
|
m = (rxmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
n = (rxmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
c = (rxmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) ||
|
|
n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) {
|
|
rxmcs_cap &= ~(3 << 2*i);
|
|
rxmcs_cap |= (rxmcs_n & (3 << 2*i));
|
|
}
|
|
|
|
m = (txmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
n = (txmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
c = (txmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) ||
|
|
n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) {
|
|
txmcs_cap &= ~(3 << 2*i);
|
|
txmcs_cap |= (txmcs_n & (3 << 2*i));
|
|
}
|
|
}
|
|
vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(rxmcs_cap);
|
|
vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(txmcs_cap);
|
|
}
|
|
|
|
void
|
|
ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_supported_band *sband,
|
|
const struct ieee80211_vht_cap *vht_cap_ie,
|
|
struct sta_info *sta)
|
|
{
|
|
struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
|
|
struct ieee80211_sta_vht_cap own_cap;
|
|
u32 cap_info, i;
|
|
bool have_80mhz;
|
|
|
|
memset(vht_cap, 0, sizeof(*vht_cap));
|
|
|
|
if (!sta->sta.ht_cap.ht_supported)
|
|
return;
|
|
|
|
if (!vht_cap_ie || !sband->vht_cap.vht_supported)
|
|
return;
|
|
|
|
/* Allow VHT if at least one channel on the sband supports 80 MHz */
|
|
have_80mhz = false;
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
|
|
IEEE80211_CHAN_NO_80MHZ))
|
|
continue;
|
|
|
|
have_80mhz = true;
|
|
break;
|
|
}
|
|
|
|
if (!have_80mhz)
|
|
return;
|
|
|
|
/*
|
|
* A VHT STA must support 40 MHz, but if we verify that here
|
|
* then we break a few things - some APs (e.g. Netgear R6300v2
|
|
* and others based on the BCM4360 chipset) will unset this
|
|
* capability bit when operating in 20 MHz.
|
|
*/
|
|
|
|
vht_cap->vht_supported = true;
|
|
|
|
own_cap = sband->vht_cap;
|
|
/*
|
|
* If user has specified capability overrides, take care
|
|
* of that if the station we're setting up is the AP that
|
|
* we advertised a restricted capability set to. Override
|
|
* our own capabilities and then use those below.
|
|
*/
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
|
|
!test_sta_flag(sta, WLAN_STA_TDLS_PEER))
|
|
ieee80211_apply_vhtcap_overrides(sdata, &own_cap);
|
|
|
|
/* take some capabilities as-is */
|
|
cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info);
|
|
vht_cap->cap = cap_info;
|
|
vht_cap->cap &= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 |
|
|
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
|
|
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
|
|
IEEE80211_VHT_CAP_RXLDPC |
|
|
IEEE80211_VHT_CAP_VHT_TXOP_PS |
|
|
IEEE80211_VHT_CAP_HTC_VHT |
|
|
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK |
|
|
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB |
|
|
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB |
|
|
IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
|
|
IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
|
|
|
|
/* and some based on our own capabilities */
|
|
switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
|
vht_cap->cap |= cap_info &
|
|
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
|
break;
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
|
vht_cap->cap |= cap_info &
|
|
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
|
|
break;
|
|
default:
|
|
/* nothing */
|
|
break;
|
|
}
|
|
|
|
/* symmetric capabilities */
|
|
vht_cap->cap |= cap_info & own_cap.cap &
|
|
(IEEE80211_VHT_CAP_SHORT_GI_80 |
|
|
IEEE80211_VHT_CAP_SHORT_GI_160);
|
|
|
|
/* remaining ones */
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
|
|
vht_cap->cap |= cap_info &
|
|
(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
|
IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK);
|
|
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
|
|
vht_cap->cap |= cap_info &
|
|
(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK);
|
|
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
|
|
vht_cap->cap |= cap_info &
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
|
|
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
|
|
vht_cap->cap |= cap_info &
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
|
|
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_TXSTBC)
|
|
vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_RXSTBC_MASK;
|
|
|
|
if (own_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK)
|
|
vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_TXSTBC;
|
|
|
|
/* Copy peer MCS info, the driver might need them. */
|
|
memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs,
|
|
sizeof(struct ieee80211_vht_mcs_info));
|
|
|
|
/* but also restrict MCSes */
|
|
for (i = 0; i < 8; i++) {
|
|
u16 own_rx, own_tx, peer_rx, peer_tx;
|
|
|
|
own_rx = le16_to_cpu(own_cap.vht_mcs.rx_mcs_map);
|
|
own_rx = (own_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
own_tx = le16_to_cpu(own_cap.vht_mcs.tx_mcs_map);
|
|
own_tx = (own_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
peer_rx = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
|
|
peer_rx = (peer_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
peer_tx = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
|
|
peer_tx = (peer_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
|
|
if (peer_tx != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
|
|
if (own_rx == IEEE80211_VHT_MCS_NOT_SUPPORTED)
|
|
peer_tx = IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
else if (own_rx < peer_tx)
|
|
peer_tx = own_rx;
|
|
}
|
|
|
|
if (peer_rx != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
|
|
if (own_tx == IEEE80211_VHT_MCS_NOT_SUPPORTED)
|
|
peer_rx = IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
else if (own_tx < peer_rx)
|
|
peer_rx = own_tx;
|
|
}
|
|
|
|
vht_cap->vht_mcs.rx_mcs_map &=
|
|
~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2);
|
|
vht_cap->vht_mcs.rx_mcs_map |= cpu_to_le16(peer_rx << i * 2);
|
|
|
|
vht_cap->vht_mcs.tx_mcs_map &=
|
|
~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2);
|
|
vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2);
|
|
}
|
|
|
|
/*
|
|
* This is a workaround for VHT-enabled STAs which break the spec
|
|
* and have the VHT-MCS Rx map filled in with value 3 for all eight
|
|
* spacial streams, an example is AR9462.
|
|
*
|
|
* As per spec, in section 22.1.1 Introduction to the VHT PHY
|
|
* A VHT STA shall support at least single spactial stream VHT-MCSs
|
|
* 0 to 7 (transmit and receive) in all supported channel widths.
|
|
*/
|
|
if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) {
|
|
vht_cap->vht_supported = false;
|
|
sdata_info(sdata, "Ignoring VHT IE from %pM due to invalid rx_mcs_map\n",
|
|
sta->addr);
|
|
return;
|
|
}
|
|
|
|
/* finally set up the bandwidth */
|
|
switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
|
|
break;
|
|
default:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
|
|
}
|
|
|
|
sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta);
|
|
|
|
/* If HT IE reported 3839 bytes only, stay with that size. */
|
|
if (sta->sta.max_amsdu_len == IEEE80211_MAX_MPDU_LEN_HT_3839)
|
|
return;
|
|
|
|
switch (vht_cap->cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK) {
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454:
|
|
sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_11454;
|
|
break;
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991:
|
|
sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_7991;
|
|
break;
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895:
|
|
default:
|
|
sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_3895;
|
|
break;
|
|
}
|
|
}
|
|
|
|
enum ieee80211_sta_rx_bandwidth ieee80211_sta_cap_rx_bw(struct sta_info *sta)
|
|
{
|
|
struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
|
|
u32 cap_width;
|
|
|
|
if (!vht_cap->vht_supported)
|
|
return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
|
|
IEEE80211_STA_RX_BW_40 :
|
|
IEEE80211_STA_RX_BW_20;
|
|
|
|
cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
|
|
|
|
if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
|
|
cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
|
|
return IEEE80211_STA_RX_BW_160;
|
|
|
|
return IEEE80211_STA_RX_BW_80;
|
|
}
|
|
|
|
enum nl80211_chan_width ieee80211_sta_cap_chan_bw(struct sta_info *sta)
|
|
{
|
|
struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
|
|
u32 cap_width;
|
|
|
|
if (!vht_cap->vht_supported) {
|
|
if (!sta->sta.ht_cap.ht_supported)
|
|
return NL80211_CHAN_WIDTH_20_NOHT;
|
|
|
|
return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
|
|
NL80211_CHAN_WIDTH_40 : NL80211_CHAN_WIDTH_20;
|
|
}
|
|
|
|
cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
|
|
|
|
if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)
|
|
return NL80211_CHAN_WIDTH_160;
|
|
else if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
|
|
return NL80211_CHAN_WIDTH_80P80;
|
|
|
|
return NL80211_CHAN_WIDTH_80;
|
|
}
|
|
|
|
enum ieee80211_sta_rx_bandwidth
|
|
ieee80211_chan_width_to_rx_bw(enum nl80211_chan_width width)
|
|
{
|
|
switch (width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
case NL80211_CHAN_WIDTH_20:
|
|
return IEEE80211_STA_RX_BW_20;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
return IEEE80211_STA_RX_BW_40;
|
|
case NL80211_CHAN_WIDTH_80:
|
|
return IEEE80211_STA_RX_BW_80;
|
|
case NL80211_CHAN_WIDTH_160:
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
return IEEE80211_STA_RX_BW_160;
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
return IEEE80211_STA_RX_BW_20;
|
|
}
|
|
}
|
|
|
|
enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = sta->sdata;
|
|
enum ieee80211_sta_rx_bandwidth bw;
|
|
enum nl80211_chan_width bss_width = sdata->vif.bss_conf.chandef.width;
|
|
|
|
bw = ieee80211_sta_cap_rx_bw(sta);
|
|
bw = min(bw, sta->cur_max_bandwidth);
|
|
|
|
/* Don't consider AP's bandwidth for TDLS peers, section 11.23.1 of
|
|
* IEEE80211-2016 specification makes higher bandwidth operation
|
|
* possible on the TDLS link if the peers have wider bandwidth
|
|
* capability.
|
|
*/
|
|
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
|
|
test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW))
|
|
return bw;
|
|
|
|
bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width));
|
|
|
|
return bw;
|
|
}
|
|
|
|
void ieee80211_sta_set_rx_nss(struct sta_info *sta)
|
|
{
|
|
u8 ht_rx_nss = 0, vht_rx_nss = 0;
|
|
|
|
/* if we received a notification already don't overwrite it */
|
|
if (sta->sta.rx_nss)
|
|
return;
|
|
|
|
if (sta->sta.ht_cap.ht_supported) {
|
|
if (sta->sta.ht_cap.mcs.rx_mask[0])
|
|
ht_rx_nss++;
|
|
if (sta->sta.ht_cap.mcs.rx_mask[1])
|
|
ht_rx_nss++;
|
|
if (sta->sta.ht_cap.mcs.rx_mask[2])
|
|
ht_rx_nss++;
|
|
if (sta->sta.ht_cap.mcs.rx_mask[3])
|
|
ht_rx_nss++;
|
|
/* FIXME: consider rx_highest? */
|
|
}
|
|
|
|
if (sta->sta.vht_cap.vht_supported) {
|
|
int i;
|
|
u16 rx_mcs_map;
|
|
|
|
rx_mcs_map = le16_to_cpu(sta->sta.vht_cap.vht_mcs.rx_mcs_map);
|
|
|
|
for (i = 7; i >= 0; i--) {
|
|
u8 mcs = (rx_mcs_map >> (2 * i)) & 3;
|
|
|
|
if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
|
|
vht_rx_nss = i + 1;
|
|
break;
|
|
}
|
|
}
|
|
/* FIXME: consider rx_highest? */
|
|
}
|
|
|
|
ht_rx_nss = max(ht_rx_nss, vht_rx_nss);
|
|
sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss);
|
|
}
|
|
|
|
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
|
|
struct sta_info *sta, u8 opmode,
|
|
enum nl80211_band band)
|
|
{
|
|
enum ieee80211_sta_rx_bandwidth new_bw;
|
|
u32 changed = 0;
|
|
u8 nss;
|
|
|
|
/* ignore - no support for BF yet */
|
|
if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)
|
|
return 0;
|
|
|
|
nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
|
|
nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
|
|
nss += 1;
|
|
|
|
if (sta->sta.rx_nss != nss) {
|
|
sta->sta.rx_nss = nss;
|
|
changed |= IEEE80211_RC_NSS_CHANGED;
|
|
}
|
|
|
|
switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
|
|
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
|
|
break;
|
|
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40;
|
|
break;
|
|
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
|
|
break;
|
|
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ:
|
|
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
|
|
break;
|
|
}
|
|
|
|
new_bw = ieee80211_sta_cur_vht_bw(sta);
|
|
if (new_bw != sta->sta.bandwidth) {
|
|
sta->sta.bandwidth = new_bw;
|
|
changed |= IEEE80211_RC_BW_CHANGED;
|
|
}
|
|
|
|
return changed;
|
|
}
|
|
|
|
void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt)
|
|
{
|
|
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
|
|
|
|
if (!sdata->vif.mu_mimo_owner)
|
|
return;
|
|
|
|
if (!memcmp(mgmt->u.action.u.vht_group_notif.position,
|
|
bss_conf->mu_group.position, WLAN_USER_POSITION_LEN) &&
|
|
!memcmp(mgmt->u.action.u.vht_group_notif.membership,
|
|
bss_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN))
|
|
return;
|
|
|
|
memcpy(bss_conf->mu_group.membership,
|
|
mgmt->u.action.u.vht_group_notif.membership,
|
|
WLAN_MEMBERSHIP_LEN);
|
|
memcpy(bss_conf->mu_group.position,
|
|
mgmt->u.action.u.vht_group_notif.position,
|
|
WLAN_USER_POSITION_LEN);
|
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_MU_GROUPS);
|
|
}
|
|
|
|
void ieee80211_update_mu_groups(struct ieee80211_vif *vif,
|
|
const u8 *membership, const u8 *position)
|
|
{
|
|
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
|
|
|
|
if (WARN_ON_ONCE(!vif->mu_mimo_owner))
|
|
return;
|
|
|
|
memcpy(bss_conf->mu_group.membership, membership, WLAN_MEMBERSHIP_LEN);
|
|
memcpy(bss_conf->mu_group.position, position, WLAN_USER_POSITION_LEN);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ieee80211_update_mu_groups);
|
|
|
|
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
|
|
struct sta_info *sta, u8 opmode,
|
|
enum nl80211_band band)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
|
|
|
|
u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band);
|
|
|
|
if (changed > 0) {
|
|
ieee80211_recalc_min_chandef(sdata);
|
|
rate_control_rate_update(local, sband, sta, changed);
|
|
}
|
|
}
|
|
|
|
void ieee80211_get_vht_mask_from_cap(__le16 vht_cap,
|
|
u16 vht_mask[NL80211_VHT_NSS_MAX])
|
|
{
|
|
int i;
|
|
u16 mask, cap = le16_to_cpu(vht_cap);
|
|
|
|
for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
|
|
mask = (cap >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
switch (mask) {
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_7:
|
|
vht_mask[i] = 0x00FF;
|
|
break;
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_8:
|
|
vht_mask[i] = 0x01FF;
|
|
break;
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_9:
|
|
vht_mask[i] = 0x03FF;
|
|
break;
|
|
case IEEE80211_VHT_MCS_NOT_SUPPORTED:
|
|
default:
|
|
vht_mask[i] = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|