mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 08:46:49 +07:00
c7f3302330
When we unplug the device, we can see both -EPIPE and -EPROTO depending on exact timing and what system we run on. If we continue to resubmit URBs, they will immediately fail, and they can cause stalls, especially on slower CPUs. Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
907 lines
21 KiB
C
907 lines
21 KiB
C
/* SocketCAN driver for Microchip CAN BUS Analyzer Tool
|
|
*
|
|
* Copyright (C) 2017 Mobica Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published
|
|
* by the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program.
|
|
*
|
|
* This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/led.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
|
|
/* vendor and product id */
|
|
#define MCBA_MODULE_NAME "mcba_usb"
|
|
#define MCBA_VENDOR_ID 0x04d8
|
|
#define MCBA_PRODUCT_ID 0x0a30
|
|
|
|
/* driver constants */
|
|
#define MCBA_MAX_RX_URBS 20
|
|
#define MCBA_MAX_TX_URBS 20
|
|
#define MCBA_CTX_FREE MCBA_MAX_TX_URBS
|
|
|
|
/* RX buffer must be bigger than msg size since at the
|
|
* beggining USB messages are stacked.
|
|
*/
|
|
#define MCBA_USB_RX_BUFF_SIZE 64
|
|
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
|
|
|
|
/* MCBA endpoint numbers */
|
|
#define MCBA_USB_EP_IN 1
|
|
#define MCBA_USB_EP_OUT 1
|
|
|
|
/* Microchip command id */
|
|
#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
|
|
#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
|
|
#define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7
|
|
#define MBCA_CMD_CHANGE_BIT_RATE 0xA1
|
|
#define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3
|
|
#define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8
|
|
#define MBCA_CMD_READ_FW_VERSION 0xA9
|
|
#define MBCA_CMD_NOTHING_TO_SEND 0xFF
|
|
#define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2
|
|
|
|
#define MCBA_VER_REQ_USB 1
|
|
#define MCBA_VER_REQ_CAN 2
|
|
|
|
#define MCBA_SIDL_EXID_MASK 0x8
|
|
#define MCBA_DLC_MASK 0xf
|
|
#define MCBA_DLC_RTR_MASK 0x40
|
|
|
|
#define MCBA_CAN_STATE_WRN_TH 95
|
|
#define MCBA_CAN_STATE_ERR_PSV_TH 127
|
|
|
|
#define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED
|
|
#define MCBA_TERMINATION_ENABLED 120
|
|
|
|
struct mcba_usb_ctx {
|
|
struct mcba_priv *priv;
|
|
u32 ndx;
|
|
u8 dlc;
|
|
bool can;
|
|
};
|
|
|
|
/* Structure to hold all of our device specific stuff */
|
|
struct mcba_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
struct sk_buff *echo_skb[MCBA_MAX_TX_URBS];
|
|
struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS];
|
|
struct usb_device *udev;
|
|
struct net_device *netdev;
|
|
struct usb_anchor tx_submitted;
|
|
struct usb_anchor rx_submitted;
|
|
struct can_berr_counter bec;
|
|
bool usb_ka_first_pass;
|
|
bool can_ka_first_pass;
|
|
bool can_speed_check;
|
|
atomic_t free_ctx_cnt;
|
|
};
|
|
|
|
/* CAN frame */
|
|
struct __packed mcba_usb_msg_can {
|
|
u8 cmd_id;
|
|
__be16 eid;
|
|
__be16 sid;
|
|
u8 dlc;
|
|
u8 data[8];
|
|
u8 timestamp[4];
|
|
u8 checksum;
|
|
};
|
|
|
|
/* command frame */
|
|
struct __packed mcba_usb_msg {
|
|
u8 cmd_id;
|
|
u8 unused[18];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_ka_usb {
|
|
u8 cmd_id;
|
|
u8 termination_state;
|
|
u8 soft_ver_major;
|
|
u8 soft_ver_minor;
|
|
u8 unused[15];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_ka_can {
|
|
u8 cmd_id;
|
|
u8 tx_err_cnt;
|
|
u8 rx_err_cnt;
|
|
u8 rx_buff_ovfl;
|
|
u8 tx_bus_off;
|
|
__be16 can_bitrate;
|
|
__le16 rx_lost;
|
|
u8 can_stat;
|
|
u8 soft_ver_major;
|
|
u8 soft_ver_minor;
|
|
u8 debug_mode;
|
|
u8 test_complete;
|
|
u8 test_result;
|
|
u8 unused[4];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_change_bitrate {
|
|
u8 cmd_id;
|
|
__be16 bitrate;
|
|
u8 unused[16];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_termination {
|
|
u8 cmd_id;
|
|
u8 termination;
|
|
u8 unused[17];
|
|
};
|
|
|
|
struct __packed mcba_usb_msg_fw_ver {
|
|
u8 cmd_id;
|
|
u8 pic;
|
|
u8 unused[17];
|
|
};
|
|
|
|
static const struct usb_device_id mcba_usb_table[] = {
|
|
{ USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) },
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, mcba_usb_table);
|
|
|
|
static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED,
|
|
MCBA_TERMINATION_ENABLED };
|
|
|
|
static const u32 mcba_bitrate[] = { 20000, 33333, 50000, 80000, 83333,
|
|
100000, 125000, 150000, 175000, 200000,
|
|
225000, 250000, 275000, 300000, 500000,
|
|
625000, 800000, 1000000 };
|
|
|
|
static inline void mcba_init_ctx(struct mcba_priv *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
|
|
priv->tx_context[i].ndx = MCBA_CTX_FREE;
|
|
priv->tx_context[i].priv = priv;
|
|
}
|
|
|
|
atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context));
|
|
}
|
|
|
|
static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv,
|
|
struct can_frame *cf)
|
|
{
|
|
int i = 0;
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
|
|
for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
|
|
if (priv->tx_context[i].ndx == MCBA_CTX_FREE) {
|
|
ctx = &priv->tx_context[i];
|
|
ctx->ndx = i;
|
|
|
|
if (cf) {
|
|
ctx->can = true;
|
|
ctx->dlc = cf->can_dlc;
|
|
} else {
|
|
ctx->can = false;
|
|
ctx->dlc = 0;
|
|
}
|
|
|
|
atomic_dec(&priv->free_ctx_cnt);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!atomic_read(&priv->free_ctx_cnt))
|
|
/* That was the last free ctx. Slow down tx path */
|
|
netif_stop_queue(priv->netdev);
|
|
|
|
return ctx;
|
|
}
|
|
|
|
/* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different
|
|
* threads. The order of execution in below function is important.
|
|
*/
|
|
static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx)
|
|
{
|
|
/* Increase number of free ctxs before freeing ctx */
|
|
atomic_inc(&ctx->priv->free_ctx_cnt);
|
|
|
|
ctx->ndx = MCBA_CTX_FREE;
|
|
|
|
/* Wake up the queue once ctx is marked free */
|
|
netif_wake_queue(ctx->priv->netdev);
|
|
}
|
|
|
|
static void mcba_usb_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct mcba_usb_ctx *ctx = urb->context;
|
|
struct net_device *netdev;
|
|
|
|
WARN_ON(!ctx);
|
|
|
|
netdev = ctx->priv->netdev;
|
|
|
|
/* free up our allocated buffer */
|
|
usb_free_coherent(urb->dev, urb->transfer_buffer_length,
|
|
urb->transfer_buffer, urb->transfer_dma);
|
|
|
|
if (ctx->can) {
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += ctx->dlc;
|
|
|
|
can_led_event(netdev, CAN_LED_EVENT_TX);
|
|
can_get_echo_skb(netdev, ctx->ndx);
|
|
}
|
|
|
|
if (urb->status)
|
|
netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
|
|
|
|
/* Release the context */
|
|
mcba_usb_free_ctx(ctx);
|
|
}
|
|
|
|
/* Send data to device */
|
|
static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *usb_msg,
|
|
struct mcba_usb_ctx *ctx)
|
|
{
|
|
struct urb *urb;
|
|
u8 *buf;
|
|
int err;
|
|
|
|
/* create a URB, and a buffer for it, and copy the data to the URB */
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
err = -ENOMEM;
|
|
goto nomembuf;
|
|
}
|
|
|
|
memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
|
|
MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
|
|
ctx);
|
|
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->tx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (unlikely(err))
|
|
goto failed;
|
|
|
|
/* Release our reference to this URB, the USB core will eventually free
|
|
* it entirely.
|
|
*/
|
|
usb_free_urb(urb);
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf,
|
|
urb->transfer_dma);
|
|
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
else
|
|
netdev_warn(priv->netdev, "failed tx_urb %d\n", err);
|
|
|
|
nomembuf:
|
|
usb_free_urb(urb);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Send data to device */
|
|
static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
u16 sid;
|
|
int err;
|
|
struct mcba_usb_msg_can usb_msg = {
|
|
.cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV
|
|
};
|
|
|
|
if (can_dropped_invalid_skb(netdev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
ctx = mcba_usb_get_free_ctx(priv, cf);
|
|
if (!ctx)
|
|
return NETDEV_TX_BUSY;
|
|
|
|
can_put_echo_skb(skb, priv->netdev, ctx->ndx);
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG) {
|
|
/* SIDH | SIDL | EIDH | EIDL
|
|
* 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
|
|
*/
|
|
sid = MCBA_SIDL_EXID_MASK;
|
|
/* store 28-18 bits */
|
|
sid |= (cf->can_id & 0x1ffc0000) >> 13;
|
|
/* store 17-16 bits */
|
|
sid |= (cf->can_id & 0x30000) >> 16;
|
|
put_unaligned_be16(sid, &usb_msg.sid);
|
|
|
|
/* store 15-0 bits */
|
|
put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid);
|
|
} else {
|
|
/* SIDH | SIDL
|
|
* 10 - 3 | 2 1 0 x x x x x
|
|
*/
|
|
put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5,
|
|
&usb_msg.sid);
|
|
usb_msg.eid = 0;
|
|
}
|
|
|
|
usb_msg.dlc = cf->can_dlc;
|
|
|
|
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
usb_msg.dlc |= MCBA_DLC_RTR_MASK;
|
|
|
|
err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx);
|
|
if (err)
|
|
goto xmit_failed;
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
xmit_failed:
|
|
can_free_echo_skb(priv->netdev, ctx->ndx);
|
|
mcba_usb_free_ctx(ctx);
|
|
dev_kfree_skb(skb);
|
|
stats->tx_dropped++;
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Send cmd to device */
|
|
static void mcba_usb_xmit_cmd(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *usb_msg)
|
|
{
|
|
struct mcba_usb_ctx *ctx = NULL;
|
|
int err;
|
|
|
|
ctx = mcba_usb_get_free_ctx(priv, NULL);
|
|
if (!ctx) {
|
|
netdev_err(priv->netdev,
|
|
"Lack of free ctx. Sending (%d) cmd aborted",
|
|
usb_msg->cmd_id);
|
|
|
|
return;
|
|
}
|
|
|
|
err = mcba_usb_xmit(priv, usb_msg, ctx);
|
|
if (err)
|
|
netdev_err(priv->netdev, "Failed to send cmd (%d)",
|
|
usb_msg->cmd_id);
|
|
}
|
|
|
|
static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate)
|
|
{
|
|
struct mcba_usb_msg_change_bitrate usb_msg = {
|
|
.cmd_id = MBCA_CMD_CHANGE_BIT_RATE
|
|
};
|
|
|
|
put_unaligned_be16(bitrate, &usb_msg.bitrate);
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
}
|
|
|
|
static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic)
|
|
{
|
|
struct mcba_usb_msg_fw_ver usb_msg = {
|
|
.cmd_id = MBCA_CMD_READ_FW_VERSION,
|
|
.pic = pic
|
|
};
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
}
|
|
|
|
static void mcba_usb_process_can(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_can *msg)
|
|
{
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
u16 sid;
|
|
|
|
skb = alloc_can_skb(priv->netdev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
sid = get_unaligned_be16(&msg->sid);
|
|
|
|
if (sid & MCBA_SIDL_EXID_MASK) {
|
|
/* SIDH | SIDL | EIDH | EIDL
|
|
* 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
|
|
*/
|
|
cf->can_id = CAN_EFF_FLAG;
|
|
|
|
/* store 28-18 bits */
|
|
cf->can_id |= (sid & 0xffe0) << 13;
|
|
/* store 17-16 bits */
|
|
cf->can_id |= (sid & 3) << 16;
|
|
/* store 15-0 bits */
|
|
cf->can_id |= get_unaligned_be16(&msg->eid);
|
|
} else {
|
|
/* SIDH | SIDL
|
|
* 10 - 3 | 2 1 0 x x x x x
|
|
*/
|
|
cf->can_id = (sid & 0xffe0) >> 5;
|
|
}
|
|
|
|
if (msg->dlc & MCBA_DLC_RTR_MASK)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
|
|
cf->can_dlc = get_can_dlc(msg->dlc & MCBA_DLC_MASK);
|
|
|
|
memcpy(cf->data, msg->data, cf->can_dlc);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
|
|
can_led_event(priv->netdev, CAN_LED_EVENT_RX);
|
|
netif_rx(skb);
|
|
}
|
|
|
|
static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_ka_usb *msg)
|
|
{
|
|
if (unlikely(priv->usb_ka_first_pass)) {
|
|
netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n",
|
|
msg->soft_ver_major, msg->soft_ver_minor);
|
|
|
|
priv->usb_ka_first_pass = false;
|
|
}
|
|
|
|
if (msg->termination_state)
|
|
priv->can.termination = MCBA_TERMINATION_ENABLED;
|
|
else
|
|
priv->can.termination = MCBA_TERMINATION_DISABLED;
|
|
}
|
|
|
|
static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg)
|
|
{
|
|
const u32 bitrate = get_unaligned_be16(&msg->can_bitrate);
|
|
|
|
if ((bitrate == 33) || (bitrate == 83))
|
|
return bitrate * 1000 + 333;
|
|
else
|
|
return bitrate * 1000;
|
|
}
|
|
|
|
static void mcba_usb_process_ka_can(struct mcba_priv *priv,
|
|
struct mcba_usb_msg_ka_can *msg)
|
|
{
|
|
if (unlikely(priv->can_ka_first_pass)) {
|
|
netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n",
|
|
msg->soft_ver_major, msg->soft_ver_minor);
|
|
|
|
priv->can_ka_first_pass = false;
|
|
}
|
|
|
|
if (unlikely(priv->can_speed_check)) {
|
|
const u32 bitrate = convert_can2host_bitrate(msg);
|
|
|
|
priv->can_speed_check = false;
|
|
|
|
if (bitrate != priv->can.bittiming.bitrate)
|
|
netdev_err(
|
|
priv->netdev,
|
|
"Wrong bitrate reported by the device (%u). Expected %u",
|
|
bitrate, priv->can.bittiming.bitrate);
|
|
}
|
|
|
|
priv->bec.txerr = msg->tx_err_cnt;
|
|
priv->bec.rxerr = msg->rx_err_cnt;
|
|
|
|
if (msg->tx_bus_off)
|
|
priv->can.state = CAN_STATE_BUS_OFF;
|
|
|
|
else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) ||
|
|
(priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH))
|
|
priv->can.state = CAN_STATE_ERROR_PASSIVE;
|
|
|
|
else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) ||
|
|
(priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH))
|
|
priv->can.state = CAN_STATE_ERROR_WARNING;
|
|
}
|
|
|
|
static void mcba_usb_process_rx(struct mcba_priv *priv,
|
|
struct mcba_usb_msg *msg)
|
|
{
|
|
switch (msg->cmd_id) {
|
|
case MBCA_CMD_I_AM_ALIVE_FROM_CAN:
|
|
mcba_usb_process_ka_can(priv,
|
|
(struct mcba_usb_msg_ka_can *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_I_AM_ALIVE_FROM_USB:
|
|
mcba_usb_process_ka_usb(priv,
|
|
(struct mcba_usb_msg_ka_usb *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_RECEIVE_MESSAGE:
|
|
mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg);
|
|
break;
|
|
|
|
case MBCA_CMD_NOTHING_TO_SEND:
|
|
/* Side effect of communication between PIC_USB and PIC_CAN.
|
|
* PIC_CAN is telling us that it has nothing to send
|
|
*/
|
|
break;
|
|
|
|
case MBCA_CMD_TRANSMIT_MESSAGE_RSP:
|
|
/* Transmission response from the device containing timestamp */
|
|
break;
|
|
|
|
default:
|
|
netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)",
|
|
msg->cmd_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Callback for reading data from device
|
|
*
|
|
* Check urb status, call read function and resubmit urb read operation.
|
|
*/
|
|
static void mcba_usb_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct mcba_priv *priv = urb->context;
|
|
struct net_device *netdev;
|
|
int retval;
|
|
int pos = 0;
|
|
|
|
netdev = priv->netdev;
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
break;
|
|
|
|
case -ENOENT:
|
|
case -EPIPE:
|
|
case -EPROTO:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
|
|
default:
|
|
netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status);
|
|
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
while (pos < urb->actual_length) {
|
|
struct mcba_usb_msg *msg;
|
|
|
|
if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) {
|
|
netdev_err(priv->netdev, "format error\n");
|
|
break;
|
|
}
|
|
|
|
msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos);
|
|
mcba_usb_process_rx(priv, msg);
|
|
|
|
pos += sizeof(struct mcba_usb_msg);
|
|
}
|
|
|
|
resubmit_urb:
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
|
|
urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
|
|
mcba_usb_read_bulk_callback, priv);
|
|
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
if (retval == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
else if (retval)
|
|
netdev_err(netdev, "failed resubmitting read bulk urb: %d\n",
|
|
retval);
|
|
}
|
|
|
|
/* Start USB device */
|
|
static int mcba_usb_start(struct mcba_priv *priv)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
int err, i;
|
|
|
|
mcba_init_ctx(priv);
|
|
|
|
for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
|
|
struct urb *urb = NULL;
|
|
u8 *buf;
|
|
|
|
/* create a URB, and a buffer for it */
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
|
|
GFP_KERNEL, &urb->transfer_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
usb_free_urb(urb);
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
|
|
buf, MCBA_USB_RX_BUFF_SIZE,
|
|
mcba_usb_read_bulk_callback, priv);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->rx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
|
|
buf, urb->transfer_dma);
|
|
usb_free_urb(urb);
|
|
break;
|
|
}
|
|
|
|
/* Drop reference, USB core will take care of freeing it */
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
/* Did we submit any URBs */
|
|
if (i == 0) {
|
|
netdev_warn(netdev, "couldn't setup read URBs\n");
|
|
return err;
|
|
}
|
|
|
|
/* Warn if we've couldn't transmit all the URBs */
|
|
if (i < MCBA_MAX_RX_URBS)
|
|
netdev_warn(netdev, "rx performance may be slow\n");
|
|
|
|
mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB);
|
|
mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Open USB device */
|
|
static int mcba_usb_open(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* common open */
|
|
err = open_candev(netdev);
|
|
if (err)
|
|
return err;
|
|
|
|
priv->can_speed_check = true;
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
can_led_event(netdev, CAN_LED_EVENT_OPEN);
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mcba_urb_unlink(struct mcba_priv *priv)
|
|
{
|
|
usb_kill_anchored_urbs(&priv->rx_submitted);
|
|
usb_kill_anchored_urbs(&priv->tx_submitted);
|
|
}
|
|
|
|
/* Close USB device */
|
|
static int mcba_usb_close(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
/* Stop polling */
|
|
mcba_urb_unlink(priv);
|
|
|
|
close_candev(netdev);
|
|
can_led_event(netdev, CAN_LED_EVENT_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set network device mode
|
|
*
|
|
* Maybe we should leave this function empty, because the device
|
|
* set mode variable with open command.
|
|
*/
|
|
static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_net_get_berr_counter(const struct net_device *netdev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
|
|
bec->txerr = priv->bec.txerr;
|
|
bec->rxerr = priv->bec.rxerr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops mcba_netdev_ops = {
|
|
.ndo_open = mcba_usb_open,
|
|
.ndo_stop = mcba_usb_close,
|
|
.ndo_start_xmit = mcba_usb_start_xmit,
|
|
};
|
|
|
|
/* Microchip CANBUS has hardcoded bittiming values by default.
|
|
* This function sends request via USB to change the speed and align bittiming
|
|
* values for presentation purposes only
|
|
*/
|
|
static int mcba_net_set_bittiming(struct net_device *netdev)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000;
|
|
|
|
mcba_usb_xmit_change_bitrate(priv, bitrate_kbps);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_set_termination(struct net_device *netdev, u16 term)
|
|
{
|
|
struct mcba_priv *priv = netdev_priv(netdev);
|
|
struct mcba_usb_msg_termination usb_msg = {
|
|
.cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE
|
|
};
|
|
|
|
if (term == MCBA_TERMINATION_ENABLED)
|
|
usb_msg.termination = 1;
|
|
else
|
|
usb_msg.termination = 0;
|
|
|
|
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcba_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct net_device *netdev;
|
|
struct mcba_priv *priv;
|
|
int err = -ENOMEM;
|
|
struct usb_device *usbdev = interface_to_usbdev(intf);
|
|
|
|
netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
|
|
if (!netdev) {
|
|
dev_err(&intf->dev, "Couldn't alloc candev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = netdev_priv(netdev);
|
|
|
|
priv->udev = usbdev;
|
|
priv->netdev = netdev;
|
|
priv->usb_ka_first_pass = true;
|
|
priv->can_ka_first_pass = true;
|
|
priv->can_speed_check = false;
|
|
|
|
init_usb_anchor(&priv->rx_submitted);
|
|
init_usb_anchor(&priv->tx_submitted);
|
|
|
|
usb_set_intfdata(intf, priv);
|
|
|
|
/* Init CAN device */
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
priv->can.termination_const = mcba_termination;
|
|
priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination);
|
|
priv->can.bitrate_const = mcba_bitrate;
|
|
priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate);
|
|
|
|
priv->can.do_set_termination = mcba_set_termination;
|
|
priv->can.do_set_mode = mcba_net_set_mode;
|
|
priv->can.do_get_berr_counter = mcba_net_get_berr_counter;
|
|
priv->can.do_set_bittiming = mcba_net_set_bittiming;
|
|
|
|
netdev->netdev_ops = &mcba_netdev_ops;
|
|
|
|
netdev->flags |= IFF_ECHO; /* we support local echo */
|
|
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
|
|
err = register_candev(netdev);
|
|
if (err) {
|
|
netdev_err(netdev, "couldn't register CAN device: %d\n", err);
|
|
|
|
goto cleanup_free_candev;
|
|
}
|
|
|
|
devm_can_led_init(netdev);
|
|
|
|
/* Start USB dev only if we have successfully registered CAN device */
|
|
err = mcba_usb_start(priv);
|
|
if (err) {
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
|
|
netdev_warn(netdev, "couldn't start device: %d\n", err);
|
|
|
|
goto cleanup_unregister_candev;
|
|
}
|
|
|
|
dev_info(&intf->dev, "Microchip CAN BUS Analyzer connected\n");
|
|
|
|
return 0;
|
|
|
|
cleanup_unregister_candev:
|
|
unregister_candev(priv->netdev);
|
|
|
|
cleanup_free_candev:
|
|
free_candev(netdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Called by the usb core when driver is unloaded or device is removed */
|
|
static void mcba_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct mcba_priv *priv = usb_get_intfdata(intf);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
netdev_info(priv->netdev, "device disconnected\n");
|
|
|
|
unregister_candev(priv->netdev);
|
|
free_candev(priv->netdev);
|
|
|
|
mcba_urb_unlink(priv);
|
|
}
|
|
|
|
static struct usb_driver mcba_usb_driver = {
|
|
.name = MCBA_MODULE_NAME,
|
|
.probe = mcba_usb_probe,
|
|
.disconnect = mcba_usb_disconnect,
|
|
.id_table = mcba_usb_table,
|
|
};
|
|
|
|
module_usb_driver(mcba_usb_driver);
|
|
|
|
MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>");
|
|
MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool");
|
|
MODULE_LICENSE("GPL v2");
|