linux_dsm_epyc7002/drivers/usb/chipidea/otg.c
Peter Chen 22fa84455a usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
When the gadget role starts, we need to make sure the vbus is lower
than OTGSC_BSV, or there will be an vbus interrupt since we use
B_SESSION_VALID as vbus interrupt to indicate connect and disconnect.
When the host role starts, it may not be useful to wait vbus to lower
than OTGSC_BSV, but it can indicate some hardware problems like the
vbus is still higher than OTGSC_BSV after we disconnect to host some
time later (5000 milliseconds currently), which is obvious not correct.

Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 12:37:20 -07:00

121 lines
2.5 KiB
C

/*
* otg.c - ChipIdea USB IP core OTG driver
*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Author: Peter Chen
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* This file mainly handles otgsc register, it may include OTG operation
* in the future.
*/
#include <linux/usb/otg.h>
#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
#include "ci.h"
#include "bits.h"
#include "otg.h"
/**
* ci_otg_role - pick role based on ID pin state
* @ci: the controller
*/
enum ci_role ci_otg_role(struct ci_hdrc *ci)
{
u32 sts = hw_read(ci, OP_OTGSC, ~0);
enum ci_role role = sts & OTGSC_ID
? CI_ROLE_GADGET
: CI_ROLE_HOST;
return role;
}
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
u32 otgsc;
if (!ci->is_otg)
return;
otgsc = hw_read(ci, OP_OTGSC, ~0);
if (otgsc & OTGSC_BSV)
usb_gadget_vbus_connect(&ci->gadget);
else
usb_gadget_vbus_disconnect(&ci->gadget);
}
#define CI_VBUS_STABLE_TIMEOUT_MS 5000
static void ci_handle_id_switch(struct ci_hdrc *ci)
{
enum ci_role role = ci_otg_role(ci);
if (role != ci->role) {
dev_dbg(ci->dev, "switching from %s to %s\n",
ci_role(ci)->name, ci->roles[role]->name);
ci_role_stop(ci);
/* wait vbus lower than OTGSC_BSV */
hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
CI_VBUS_STABLE_TIMEOUT_MS);
ci_role_start(ci, role);
}
}
/**
* ci_otg_work - perform otg (vbus/id) event handle
* @work: work struct
*/
static void ci_otg_work(struct work_struct *work)
{
struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
if (ci->id_event) {
ci->id_event = false;
ci_handle_id_switch(ci);
} else if (ci->b_sess_valid_event) {
ci->b_sess_valid_event = false;
ci_handle_vbus_change(ci);
} else
dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
enable_irq(ci->irq);
}
/**
* ci_hdrc_otg_init - initialize otg struct
* ci: the controller
*/
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
INIT_WORK(&ci->work, ci_otg_work);
ci->wq = create_singlethread_workqueue("ci_otg");
if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV;
}
return 0;
}
/**
* ci_hdrc_otg_destroy - destroy otg struct
* ci: the controller
*/
void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
{
if (ci->wq) {
flush_workqueue(ci->wq);
destroy_workqueue(ci->wq);
}
ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
}