mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 20:16:05 +07:00
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
559 lines
14 KiB
Plaintext
559 lines
14 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 39x family of SoCs.
|
|
*
|
|
* Copyright (C) 2015 Marvell
|
|
*
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Marvell Armada 39x family SoC";
|
|
compatible = "marvell,armada390";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,armada-390-smp";
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts-extended = <&mpic 3>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
|
|
"simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
interrupt-parent = <&gic>;
|
|
pcie-mem-aperture = <0xe0000000 0x8000000>;
|
|
pcie-io-aperture = <0xe8000000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
L2: cache-controller@8000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x8000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
arm,double-linefill-incr = <0>;
|
|
arm,double-linefill-wrap = <0>;
|
|
arm,double-linefill = <0>;
|
|
prefetch-data = <1>;
|
|
};
|
|
|
|
scu@c000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xc000 0x100>;
|
|
};
|
|
|
|
timer@c600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xc600 0x20>;
|
|
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
gic: interrupt-controller@d000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0xd000 0x1000>,
|
|
<0xc100 0x100>;
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11100 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11100 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@11200 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11200 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@11300 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11300 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@12200 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12200 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@12300 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12300 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl@18000 {
|
|
i2c0_pins: i2c0-pins {
|
|
marvell,pins = "mpp2", "mpp3";
|
|
marvell,function = "i2c0";
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
marvell,pins = "mpp0", "mpp1";
|
|
marvell,function = "ua0";
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
marvell,pins = "mpp19", "mpp20";
|
|
marvell,function = "ua1";
|
|
};
|
|
|
|
spi1_pins: spi1-pins {
|
|
marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
|
|
marvell,function = "spi1";
|
|
};
|
|
|
|
nand_pins: nand-pins {
|
|
marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
|
|
"mpp38", "mpp28", "mpp40", "mpp42",
|
|
"mpp35", "mpp36", "mpp25", "mpp30",
|
|
"mpp32";
|
|
marvell,function = "dev";
|
|
};
|
|
};
|
|
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18100 0x40>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18140 0x40>;
|
|
ngpios = <28>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
system-controller@18200 {
|
|
compatible = "marvell,armada-390-system-controller",
|
|
"marvell,armada-370-xp-system-controller";
|
|
reg = <0x18200 0x100>;
|
|
};
|
|
|
|
gateclk: clock-gating-control@18220 {
|
|
compatible = "marvell,armada-390-gating-clock";
|
|
reg = <0x18220 0x4>;
|
|
clocks = <&coreclk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
coreclk: mvebu-sar@18600 {
|
|
compatible = "marvell,armada-390-core-clock";
|
|
reg = <0x18600 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
|
|
};
|
|
|
|
mpic: interrupt-controller@20a00 {
|
|
compatible = "marvell,mpic";
|
|
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer@20300 {
|
|
compatible = "marvell,armada-380-timer",
|
|
"marvell,armada-xp-timer";
|
|
reg = <0x20300 0x30>, <0x21040 0x30>;
|
|
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&mpic 5>,
|
|
<&mpic 6>;
|
|
clocks = <&coreclk 2>, <&coreclk 5>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
watchdog@20300 {
|
|
compatible = "marvell,armada-380-wdt";
|
|
reg = <0x20300 0x34>, <0x20704 0x4>,
|
|
<0x18260 0x4>;
|
|
clocks = <&coreclk 2>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
cpurst@20800 {
|
|
compatible = "marvell,armada-370-cpu-reset";
|
|
reg = <0x20800 0x10>;
|
|
};
|
|
|
|
mpcore-soc-ctrl@20d20 {
|
|
compatible = "marvell,armada-380-mpcore-soc-ctrl";
|
|
reg = <0x20d20 0x6c>;
|
|
};
|
|
|
|
coherency-fabric@21010 {
|
|
compatible = "marvell,armada-380-coherency-fabric";
|
|
reg = <0x21010 0x1c>;
|
|
};
|
|
|
|
pmsu@22000 {
|
|
compatible = "marvell,armada-390-pmsu",
|
|
"marvell,armada-380-pmsu";
|
|
reg = <0x22000 0x1000>;
|
|
};
|
|
|
|
xor@60800 {
|
|
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60a00 0x100>;
|
|
clocks = <&gateclk 22>;
|
|
status = "okay";
|
|
|
|
xor00 {
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
xor@60900 {
|
|
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60b00 0x100>;
|
|
clocks = <&gateclk 28>;
|
|
status = "okay";
|
|
|
|
xor10 {
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor11 {
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
rtc@a3800 {
|
|
compatible = "marvell,armada-380-rtc";
|
|
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
|
|
reg-names = "rtc", "rtc-soc";
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand_controller: nand-controller@d0000 {
|
|
compatible = "marvell,armada370-nand-controller";
|
|
reg = <0xd0000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coredivclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
compatible = "marvell,armada-380-sdhci";
|
|
reg-names = "sdhci", "mbus", "conf-sdio3";
|
|
reg = <0xd8000 0x1000>,
|
|
<0xdc000 0x100>,
|
|
<0x18454 0x4>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 17>;
|
|
mrvl,clk-delay-cycles = <0x1F>;
|
|
status = "disabled";
|
|
};
|
|
|
|
coredivclk: clock@e4250 {
|
|
compatible = "marvell,armada-390-corediv-clock",
|
|
"marvell,armada-380-corediv-clock";
|
|
reg = <0xe4250 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
thermal@e8078 {
|
|
compatible = "marvell,armada380-thermal";
|
|
reg = <0xe4078 0x4>, <0xe4074 0x4>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
compatible = "marvell,armada-370-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&mpic>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
|
|
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
|
|
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
|
|
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
|
|
0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
|
|
0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
|
|
0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
|
|
0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
|
|
0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
|
|
0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
|
|
0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
|
|
|
|
/*
|
|
* This port can be either x4 or x1. When
|
|
* configured in x4 by the bootloader, then
|
|
* pcie@4,0 is not available.
|
|
*/
|
|
pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* x1 port */
|
|
pcie@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x1000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
|
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 5>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* x1 port */
|
|
pcie@3,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
|
|
reg = <0x1800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
|
|
0x81000000 0 0 0x81000000 0x3 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <2>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/*
|
|
* x1 port only available when pcie@1,0 is
|
|
* configured as a x1 port
|
|
*/
|
|
pcie@4,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
|
|
reg = <0x2000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
|
|
0x81000000 0 0 0x81000000 0x4 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <3>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 7>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
compatible = "marvell,armada-390-spi",
|
|
"marvell,orion-spi";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
compatible = "marvell,armada-390-spi",
|
|
"marvell,orion-spi";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
/* 1 GHz fixed main PLL */
|
|
mainpll: mainpll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000000>;
|
|
};
|
|
|
|
/* 25 MHz reference crystal */
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
};
|