mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 08:25:39 +07:00
56e6943b90
The member "clock" of struct "sja1000_platform_data" is documented as "CAN bus oscillator frequency in Hz" but it's actually used as the CAN clock frequency, which is half of it. To avoid further confusion, this patch fixes it by renaming the member to "osc_freq". That way, also non mainline users will notice the change. The platform code for the relevant boards is updated accordingly. Furthermore, pre-defined values are now used for the members "ocr" and "cdr". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
36 lines
1.0 KiB
C
36 lines
1.0 KiB
C
#ifndef _CAN_PLATFORM_SJA1000_H_
|
|
#define _CAN_PLATFORM_SJA1000_H_
|
|
|
|
/* clock divider register */
|
|
#define CDR_CLKOUT_MASK 0x07
|
|
#define CDR_CLK_OFF 0x08 /* Clock off (CLKOUT pin) */
|
|
#define CDR_RXINPEN 0x20 /* TX1 output is RX irq output */
|
|
#define CDR_CBP 0x40 /* CAN input comparator bypass */
|
|
#define CDR_PELICAN 0x80 /* PeliCAN mode */
|
|
|
|
/* output control register */
|
|
#define OCR_MODE_BIPHASE 0x00
|
|
#define OCR_MODE_TEST 0x01
|
|
#define OCR_MODE_NORMAL 0x02
|
|
#define OCR_MODE_CLOCK 0x03
|
|
#define OCR_MODE_MASK 0x07
|
|
#define OCR_TX0_INVERT 0x04
|
|
#define OCR_TX0_PULLDOWN 0x08
|
|
#define OCR_TX0_PULLUP 0x10
|
|
#define OCR_TX0_PUSHPULL 0x18
|
|
#define OCR_TX1_INVERT 0x20
|
|
#define OCR_TX1_PULLDOWN 0x40
|
|
#define OCR_TX1_PULLUP 0x80
|
|
#define OCR_TX1_PUSHPULL 0xc0
|
|
#define OCR_TX_MASK 0xfc
|
|
#define OCR_TX_SHIFT 2
|
|
|
|
struct sja1000_platform_data {
|
|
u32 osc_freq; /* CAN bus oscillator frequency in Hz */
|
|
|
|
u8 ocr; /* output control register */
|
|
u8 cdr; /* clock divider register */
|
|
};
|
|
|
|
#endif /* !_CAN_PLATFORM_SJA1000_H_ */
|