mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 19:55:28 +07:00
3916b09eed
RTC settings will be lost if power supply is cut off after hibernation finished, but the current "restore" function does not restore RTC related settings, this causes rtc_read_time failure and kernel panic: rtc rtc0: **** DPM device timeout **** Stack trace: unwind_backtrace+0x0/0xf4 show_stack+0x10/0x14 dpm_wd_handler+0x24/0x28 call_timer_fn.isra.33+0x24/0x88 run_timer_softirq+0x178/0x1f0 __do_softirq+0x120/0x200 do_softirq+0x54/0x5c irq_exit+0x9c/0xd0 handle_IRQ+0x44/0x90 __irq_svc+0x40/0x70 _raw_spin_unlock_irqrestore+0x10/0x48 sirfsoc_rtc_iobrg_readl+0x34/0x3c sirfsoc_rtc_read_time+0x24/0x48 __rtc_read_time.isra.3+0x48/0x5c rtc_read_time+0x30/0x44 rtc_resume.part.9+0x20/0x104 rtc_resume+0x5c/0x64 dpm_run_callback.isra.4+0x2c/0x74 device_resume+0x9c/0x144 dpm_resume+0x100/0x224 hibernation_snapshot+0x170/0x398 hibernate+0x13c/0x1d8 state_store+0xb4/0xb8 kobj_attr_store+0x14/0x20 sysfs_write_file+0x160/0x190 vfs_write+0xb4/0x194 SyS_write+0x3c/0x78 this patch uses SIMPLE_DEV_PM_OPS() to make restore() execute the existing resume() function which will restore the set of RTC. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
424 lines
11 KiB
C
424 lines
11 KiB
C
/*
|
|
* SiRFSoC Real Time Clock interface for Linux
|
|
*
|
|
* Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/rtc/sirfsoc_rtciobrg.h>
|
|
|
|
|
|
#define RTC_CN 0x00
|
|
#define RTC_ALARM0 0x04
|
|
#define RTC_ALARM1 0x18
|
|
#define RTC_STATUS 0x08
|
|
#define RTC_SW_VALUE 0x40
|
|
#define SIRFSOC_RTC_AL1E (1<<6)
|
|
#define SIRFSOC_RTC_AL1 (1<<4)
|
|
#define SIRFSOC_RTC_HZE (1<<3)
|
|
#define SIRFSOC_RTC_AL0E (1<<2)
|
|
#define SIRFSOC_RTC_HZ (1<<1)
|
|
#define SIRFSOC_RTC_AL0 (1<<0)
|
|
#define RTC_DIV 0x0c
|
|
#define RTC_DEEP_CTRL 0x14
|
|
#define RTC_CLOCK_SWITCH 0x1c
|
|
#define SIRFSOC_RTC_CLK 0x03 /* others are reserved */
|
|
|
|
/* Refer to RTC DIV switch */
|
|
#define RTC_HZ 16
|
|
|
|
/* This macro is also defined in arch/arm/plat-sirfsoc/cpu.c */
|
|
#define RTC_SHIFT 4
|
|
|
|
#define INTR_SYSRTC_CN 0x48
|
|
|
|
struct sirfsoc_rtc_drv {
|
|
struct rtc_device *rtc;
|
|
u32 rtc_base;
|
|
u32 irq;
|
|
unsigned irq_wake;
|
|
/* Overflow for every 8 years extra time */
|
|
u32 overflow_rtc;
|
|
#ifdef CONFIG_PM
|
|
u32 saved_counter;
|
|
u32 saved_overflow_rtc;
|
|
#endif
|
|
};
|
|
|
|
static int sirfsoc_rtc_read_alarm(struct device *dev,
|
|
struct rtc_wkalrm *alrm)
|
|
{
|
|
unsigned long rtc_alarm, rtc_count;
|
|
struct sirfsoc_rtc_drv *rtcdrv;
|
|
|
|
rtcdrv = dev_get_drvdata(dev);
|
|
|
|
local_irq_disable();
|
|
|
|
rtc_count = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
|
|
|
|
rtc_alarm = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_ALARM0);
|
|
memset(alrm, 0, sizeof(struct rtc_wkalrm));
|
|
|
|
/*
|
|
* assume alarm interval not beyond one round counter overflow_rtc:
|
|
* 0->0xffffffff
|
|
*/
|
|
/* if alarm is in next overflow cycle */
|
|
if (rtc_count > rtc_alarm)
|
|
rtc_time_to_tm((rtcdrv->overflow_rtc + 1)
|
|
<< (BITS_PER_LONG - RTC_SHIFT)
|
|
| rtc_alarm >> RTC_SHIFT, &(alrm->time));
|
|
else
|
|
rtc_time_to_tm(rtcdrv->overflow_rtc
|
|
<< (BITS_PER_LONG - RTC_SHIFT)
|
|
| rtc_alarm >> RTC_SHIFT, &(alrm->time));
|
|
if (sirfsoc_rtc_iobrg_readl(
|
|
rtcdrv->rtc_base + RTC_STATUS) & SIRFSOC_RTC_AL0E)
|
|
alrm->enabled = 1;
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_set_alarm(struct device *dev,
|
|
struct rtc_wkalrm *alrm)
|
|
{
|
|
unsigned long rtc_status_reg, rtc_alarm;
|
|
struct sirfsoc_rtc_drv *rtcdrv;
|
|
rtcdrv = dev_get_drvdata(dev);
|
|
|
|
if (alrm->enabled) {
|
|
rtc_tm_to_time(&(alrm->time), &rtc_alarm);
|
|
|
|
local_irq_disable();
|
|
|
|
rtc_status_reg = sirfsoc_rtc_iobrg_readl(
|
|
rtcdrv->rtc_base + RTC_STATUS);
|
|
if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
|
|
/*
|
|
* An ongoing alarm in progress - ingore it and not
|
|
* to return EBUSY
|
|
*/
|
|
dev_info(dev, "An old alarm was set, will be replaced by a new one\n");
|
|
}
|
|
|
|
sirfsoc_rtc_iobrg_writel(
|
|
rtc_alarm << RTC_SHIFT, rtcdrv->rtc_base + RTC_ALARM0);
|
|
rtc_status_reg &= ~0x07; /* mask out the lower status bits */
|
|
/*
|
|
* This bit RTC_AL sets it as a wake-up source for Sleep Mode
|
|
* Writing 1 into this bit will clear it
|
|
*/
|
|
rtc_status_reg |= SIRFSOC_RTC_AL0;
|
|
/* enable the RTC alarm interrupt */
|
|
rtc_status_reg |= SIRFSOC_RTC_AL0E;
|
|
sirfsoc_rtc_iobrg_writel(
|
|
rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
|
|
local_irq_enable();
|
|
} else {
|
|
/*
|
|
* if this function was called with enabled=0
|
|
* then it could mean that the application is
|
|
* trying to cancel an ongoing alarm
|
|
*/
|
|
local_irq_disable();
|
|
|
|
rtc_status_reg = sirfsoc_rtc_iobrg_readl(
|
|
rtcdrv->rtc_base + RTC_STATUS);
|
|
if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
|
|
/* clear the RTC status register's alarm bit */
|
|
rtc_status_reg &= ~0x07;
|
|
/* write 1 into SIRFSOC_RTC_AL0 to force a clear */
|
|
rtc_status_reg |= (SIRFSOC_RTC_AL0);
|
|
/* Clear the Alarm enable bit */
|
|
rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
|
|
|
|
sirfsoc_rtc_iobrg_writel(rtc_status_reg,
|
|
rtcdrv->rtc_base + RTC_STATUS);
|
|
}
|
|
|
|
local_irq_enable();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_read_time(struct device *dev,
|
|
struct rtc_time *tm)
|
|
{
|
|
unsigned long tmp_rtc = 0;
|
|
struct sirfsoc_rtc_drv *rtcdrv;
|
|
rtcdrv = dev_get_drvdata(dev);
|
|
/*
|
|
* This patch is taken from WinCE - Need to validate this for
|
|
* correctness. To work around sirfsoc RTC counter double sync logic
|
|
* fail, read several times to make sure get stable value.
|
|
*/
|
|
do {
|
|
tmp_rtc = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
|
|
cpu_relax();
|
|
} while (tmp_rtc != sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN));
|
|
|
|
rtc_time_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT) |
|
|
tmp_rtc >> RTC_SHIFT, tm);
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_set_time(struct device *dev,
|
|
struct rtc_time *tm)
|
|
{
|
|
unsigned long rtc_time;
|
|
struct sirfsoc_rtc_drv *rtcdrv;
|
|
rtcdrv = dev_get_drvdata(dev);
|
|
|
|
rtc_tm_to_time(tm, &rtc_time);
|
|
|
|
rtcdrv->overflow_rtc = rtc_time >> (BITS_PER_LONG - RTC_SHIFT);
|
|
|
|
sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
|
|
rtcdrv->rtc_base + RTC_SW_VALUE);
|
|
sirfsoc_rtc_iobrg_writel(
|
|
rtc_time << RTC_SHIFT, rtcdrv->rtc_base + RTC_CN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_ioctl(struct device *dev, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
switch (cmd) {
|
|
case RTC_PIE_ON:
|
|
case RTC_PIE_OFF:
|
|
case RTC_UIE_ON:
|
|
case RTC_UIE_OFF:
|
|
case RTC_AIE_ON:
|
|
case RTC_AIE_OFF:
|
|
return 0;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static const struct rtc_class_ops sirfsoc_rtc_ops = {
|
|
.read_time = sirfsoc_rtc_read_time,
|
|
.set_time = sirfsoc_rtc_set_time,
|
|
.read_alarm = sirfsoc_rtc_read_alarm,
|
|
.set_alarm = sirfsoc_rtc_set_alarm,
|
|
.ioctl = sirfsoc_rtc_ioctl
|
|
};
|
|
|
|
static irqreturn_t sirfsoc_rtc_irq_handler(int irq, void *pdata)
|
|
{
|
|
struct sirfsoc_rtc_drv *rtcdrv = pdata;
|
|
unsigned long rtc_status_reg = 0x0;
|
|
unsigned long events = 0x0;
|
|
|
|
rtc_status_reg = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_STATUS);
|
|
/* this bit will be set ONLY if an alarm was active
|
|
* and it expired NOW
|
|
* So this is being used as an ASSERT
|
|
*/
|
|
if (rtc_status_reg & SIRFSOC_RTC_AL0) {
|
|
/*
|
|
* clear the RTC status register's alarm bit
|
|
* mask out the lower status bits
|
|
*/
|
|
rtc_status_reg &= ~0x07;
|
|
/* write 1 into SIRFSOC_RTC_AL0 to ACK the alarm interrupt */
|
|
rtc_status_reg |= (SIRFSOC_RTC_AL0);
|
|
/* Clear the Alarm enable bit */
|
|
rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
|
|
}
|
|
sirfsoc_rtc_iobrg_writel(rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
|
|
/* this should wake up any apps polling/waiting on the read
|
|
* after setting the alarm
|
|
*/
|
|
events |= RTC_IRQF | RTC_AF;
|
|
rtc_update_irq(rtcdrv->rtc, 1, events);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct of_device_id sirfsoc_rtc_of_match[] = {
|
|
{ .compatible = "sirf,prima2-sysrtc"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sirfsoc_rtc_of_match);
|
|
|
|
static int sirfsoc_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
unsigned long rtc_div;
|
|
struct sirfsoc_rtc_drv *rtcdrv;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
rtcdrv = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct sirfsoc_rtc_drv), GFP_KERNEL);
|
|
if (rtcdrv == NULL)
|
|
return -ENOMEM;
|
|
|
|
err = of_property_read_u32(np, "reg", &rtcdrv->rtc_base);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "unable to find base address of rtc node in dtb\n");
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, rtcdrv);
|
|
|
|
/* Register rtc alarm as a wakeup source */
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
/*
|
|
* Set SYS_RTC counter in RTC_HZ HZ Units
|
|
* We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
|
|
* If 16HZ, therefore RTC_DIV = 1023;
|
|
*/
|
|
rtc_div = ((32768 / RTC_HZ) / 2) - 1;
|
|
sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
|
|
|
|
rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&sirfsoc_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtcdrv->rtc)) {
|
|
err = PTR_ERR(rtcdrv->rtc);
|
|
dev_err(&pdev->dev, "can't register RTC device\n");
|
|
return err;
|
|
}
|
|
|
|
/* 0x3 -> RTC_CLK */
|
|
sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
|
|
rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
|
|
|
|
/* reset SYS RTC ALARM0 */
|
|
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
|
|
|
|
/* reset SYS RTC ALARM1 */
|
|
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
|
|
|
|
/* Restore RTC Overflow From Register After Command Reboot */
|
|
rtcdrv->overflow_rtc =
|
|
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
|
|
|
|
rtcdrv->irq = platform_get_irq(pdev, 0);
|
|
err = devm_request_irq(
|
|
&pdev->dev,
|
|
rtcdrv->irq,
|
|
sirfsoc_rtc_irq_handler,
|
|
IRQF_SHARED,
|
|
pdev->name,
|
|
rtcdrv);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Unable to register for the SiRF SOC RTC IRQ\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sirfsoc_rtc_suspend(struct device *dev)
|
|
{
|
|
struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
|
|
rtcdrv->overflow_rtc =
|
|
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
|
|
|
|
rtcdrv->saved_counter =
|
|
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
|
|
rtcdrv->saved_overflow_rtc = rtcdrv->overflow_rtc;
|
|
if (device_may_wakeup(dev) && !enable_irq_wake(rtcdrv->irq))
|
|
rtcdrv->irq_wake = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sirfsoc_rtc_resume(struct device *dev)
|
|
{
|
|
u32 tmp;
|
|
struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* if resume from snapshot and the rtc power is lost,
|
|
* restroe the rtc settings
|
|
*/
|
|
if (SIRFSOC_RTC_CLK != sirfsoc_rtc_iobrg_readl(
|
|
rtcdrv->rtc_base + RTC_CLOCK_SWITCH)) {
|
|
u32 rtc_div;
|
|
/* 0x3 -> RTC_CLK */
|
|
sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
|
|
rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
|
|
/*
|
|
* Set SYS_RTC counter in RTC_HZ HZ Units
|
|
* We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
|
|
* If 16HZ, therefore RTC_DIV = 1023;
|
|
*/
|
|
rtc_div = ((32768 / RTC_HZ) / 2) - 1;
|
|
|
|
sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
|
|
|
|
/* reset SYS RTC ALARM0 */
|
|
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
|
|
|
|
/* reset SYS RTC ALARM1 */
|
|
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
|
|
}
|
|
rtcdrv->overflow_rtc = rtcdrv->saved_overflow_rtc;
|
|
|
|
/*
|
|
* if current counter is small than previous,
|
|
* it means overflow in sleep
|
|
*/
|
|
tmp = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
|
|
if (tmp <= rtcdrv->saved_counter)
|
|
rtcdrv->overflow_rtc++;
|
|
/*
|
|
*PWRC Value Be Changed When Suspend, Restore Overflow
|
|
* In Memory To Register
|
|
*/
|
|
sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
|
|
rtcdrv->rtc_base + RTC_SW_VALUE);
|
|
|
|
if (device_may_wakeup(dev) && rtcdrv->irq_wake) {
|
|
disable_irq_wake(rtcdrv->irq);
|
|
rtcdrv->irq_wake = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(sirfsoc_rtc_pm_ops,
|
|
sirfsoc_rtc_suspend, sirfsoc_rtc_resume);
|
|
|
|
static struct platform_driver sirfsoc_rtc_driver = {
|
|
.driver = {
|
|
.name = "sirfsoc-rtc",
|
|
.owner = THIS_MODULE,
|
|
.pm = &sirfsoc_rtc_pm_ops,
|
|
.of_match_table = sirfsoc_rtc_of_match,
|
|
},
|
|
.probe = sirfsoc_rtc_probe,
|
|
.remove = sirfsoc_rtc_remove,
|
|
};
|
|
module_platform_driver(sirfsoc_rtc_driver);
|
|
|
|
MODULE_DESCRIPTION("SiRF SoC rtc driver");
|
|
MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:sirfsoc-rtc");
|