linux_dsm_epyc7002/drivers/extcon/extcon-max8997.c
Linus Torvalds 5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00

536 lines
13 KiB
C

/*
* extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC
*
* Copyright (C) 2012 Samsung Electrnoics
* Donggeun Kim <dg77.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/kobject.h>
#include <linux/mfd/max8997.h>
#include <linux/mfd/max8997-private.h>
#include <linux/extcon.h>
#define DEV_NAME "max8997-muic"
/* MAX8997-MUIC STATUS1 register */
#define STATUS1_ADC_SHIFT 0
#define STATUS1_ADCLOW_SHIFT 5
#define STATUS1_ADCERR_SHIFT 6
#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT)
#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT)
/* MAX8997-MUIC STATUS2 register */
#define STATUS2_CHGTYP_SHIFT 0
#define STATUS2_CHGDETRUN_SHIFT 3
#define STATUS2_DCDTMR_SHIFT 4
#define STATUS2_DBCHG_SHIFT 5
#define STATUS2_VBVOLT_SHIFT 6
#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT)
#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT)
#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT)
#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT)
/* MAX8997-MUIC STATUS3 register */
#define STATUS3_OVP_SHIFT 2
#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT)
/* MAX8997-MUIC CONTROL1 register */
#define COMN1SW_SHIFT 0
#define COMP2SW_SHIFT 3
#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT)
#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT)
#define SW_MASK (COMP2SW_MASK | COMN1SW_MASK)
#define MAX8997_SW_USB ((1 << COMP2SW_SHIFT) | (1 << COMN1SW_SHIFT))
#define MAX8997_SW_AUDIO ((2 << COMP2SW_SHIFT) | (2 << COMN1SW_SHIFT))
#define MAX8997_SW_UART ((3 << COMP2SW_SHIFT) | (3 << COMN1SW_SHIFT))
#define MAX8997_SW_OPEN ((0 << COMP2SW_SHIFT) | (0 << COMN1SW_SHIFT))
#define MAX8997_ADC_GROUND 0x00
#define MAX8997_ADC_MHL 0x01
#define MAX8997_ADC_JIG_USB_1 0x18
#define MAX8997_ADC_JIG_USB_2 0x19
#define MAX8997_ADC_DESKDOCK 0x1a
#define MAX8997_ADC_JIG_UART 0x1c
#define MAX8997_ADC_CARDOCK 0x1d
#define MAX8997_ADC_OPEN 0x1f
struct max8997_muic_irq {
unsigned int irq;
const char *name;
};
static struct max8997_muic_irq muic_irqs[] = {
{ MAX8997_MUICIRQ_ADCError, "muic-ADC_error" },
{ MAX8997_MUICIRQ_ADCLow, "muic-ADC_low" },
{ MAX8997_MUICIRQ_ADC, "muic-ADC" },
{ MAX8997_MUICIRQ_VBVolt, "muic-VB_voltage" },
{ MAX8997_MUICIRQ_DBChg, "muic-DB_charger" },
{ MAX8997_MUICIRQ_DCDTmr, "muic-DCD_timer" },
{ MAX8997_MUICIRQ_ChgDetRun, "muic-CDR_status" },
{ MAX8997_MUICIRQ_ChgTyp, "muic-charger_type" },
{ MAX8997_MUICIRQ_OVP, "muic-over_voltage" },
};
struct max8997_muic_info {
struct device *dev;
struct i2c_client *muic;
struct max8997_muic_platform_data *muic_pdata;
int irq;
struct work_struct irq_work;
enum max8997_muic_charger_type pre_charger_type;
int pre_adc;
struct mutex mutex;
struct extcon_dev *edev;
};
const char *max8997_extcon_cable[] = {
[0] = "USB",
[1] = "USB-Host",
[2] = "TA",
[3] = "Fast-charger",
[4] = "Slow-charger",
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
[7] = "Dock-card",
[8] = "JIG",
NULL,
};
static int max8997_muic_handle_usb(struct max8997_muic_info *info,
enum max8997_muic_usb_type usb_type, bool attached)
{
int ret = 0;
if (usb_type == MAX8997_USB_HOST) {
/* switch to USB */
ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
attached ? MAX8997_SW_USB : MAX8997_SW_OPEN,
SW_MASK);
if (ret) {
dev_err(info->dev, "failed to update muic register\n");
goto out;
}
}
switch (usb_type) {
case MAX8997_USB_HOST:
extcon_set_cable_state(info->edev, "USB-Host", attached);
break;
case MAX8997_USB_DEVICE:
extcon_set_cable_state(info->edev, "USB", attached);
break;
default:
ret = -EINVAL;
break;
}
out:
return ret;
}
static int max8997_muic_handle_dock(struct max8997_muic_info *info,
int adc, bool attached)
{
int ret = 0;
/* switch to AUDIO */
ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
attached ? MAX8997_SW_AUDIO : MAX8997_SW_OPEN,
SW_MASK);
if (ret) {
dev_err(info->dev, "failed to update muic register\n");
goto out;
}
switch (adc) {
case MAX8997_ADC_DESKDOCK:
extcon_set_cable_state(info->edev, "Dock-desk", attached);
break;
case MAX8997_ADC_CARDOCK:
extcon_set_cable_state(info->edev, "Dock-card", attached);
break;
default:
ret = -EINVAL;
break;
}
out:
return ret;
}
static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
bool attached)
{
int ret = 0;
/* switch to UART */
ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
attached ? MAX8997_SW_UART : MAX8997_SW_OPEN,
SW_MASK);
if (ret) {
dev_err(info->dev, "failed to update muic register\n");
goto out;
}
extcon_set_cable_state(info->edev, "JIG", attached);
out:
return ret;
}
static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info)
{
int ret = 0;
switch (info->pre_adc) {
case MAX8997_ADC_GROUND:
ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false);
break;
case MAX8997_ADC_MHL:
extcon_set_cable_state(info->edev, "MHL", false);
break;
case MAX8997_ADC_JIG_USB_1:
case MAX8997_ADC_JIG_USB_2:
ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, false);
break;
case MAX8997_ADC_DESKDOCK:
case MAX8997_ADC_CARDOCK:
ret = max8997_muic_handle_dock(info, info->pre_adc, false);
break;
case MAX8997_ADC_JIG_UART:
ret = max8997_muic_handle_jig_uart(info, false);
break;
default:
break;
}
return ret;
}
static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
{
int ret = 0;
switch (adc) {
case MAX8997_ADC_GROUND:
ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true);
break;
case MAX8997_ADC_MHL:
extcon_set_cable_state(info->edev, "MHL", true);
break;
case MAX8997_ADC_JIG_USB_1:
case MAX8997_ADC_JIG_USB_2:
ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true);
break;
case MAX8997_ADC_DESKDOCK:
case MAX8997_ADC_CARDOCK:
ret = max8997_muic_handle_dock(info, adc, true);
break;
case MAX8997_ADC_JIG_UART:
ret = max8997_muic_handle_jig_uart(info, true);
break;
case MAX8997_ADC_OPEN:
ret = max8997_muic_handle_adc_detach(info);
break;
default:
ret = -EINVAL;
goto out;
}
info->pre_adc = adc;
out:
return ret;
}
static int max8997_muic_handle_charger_type_detach(
struct max8997_muic_info *info)
{
int ret = 0;
switch (info->pre_charger_type) {
case MAX8997_CHARGER_TYPE_USB:
extcon_set_cable_state(info->edev, "USB", false);
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev, "Charge-downstream", false);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
extcon_set_cable_state(info->edev, "TA", false);
break;
case MAX8997_CHARGER_TYPE_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", false);
break;
case MAX8997_CHARGER_TYPE_1A:
extcon_set_cable_state(info->edev, "Fast-charger", false);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
enum max8997_muic_charger_type charger_type)
{
u8 adc;
int ret;
ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_STATUS1, &adc);
if (ret) {
dev_err(info->dev, "failed to read muic register\n");
goto out;
}
switch (charger_type) {
case MAX8997_CHARGER_TYPE_NONE:
ret = max8997_muic_handle_charger_type_detach(info);
break;
case MAX8997_CHARGER_TYPE_USB:
if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) {
max8997_muic_handle_usb(info,
MAX8997_USB_DEVICE, true);
}
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev, "Charge-downstream", true);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
extcon_set_cable_state(info->edev, "TA", true);
break;
case MAX8997_CHARGER_TYPE_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", true);
break;
case MAX8997_CHARGER_TYPE_1A:
extcon_set_cable_state(info->edev, "Fast-charger", true);
break;
default:
ret = -EINVAL;
goto out;
}
info->pre_charger_type = charger_type;
out:
return ret;
}
static void max8997_muic_irq_work(struct work_struct *work)
{
struct max8997_muic_info *info = container_of(work,
struct max8997_muic_info, irq_work);
struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
u8 status[2];
u8 adc, chg_type;
int irq_type = info->irq - max8997->irq_base;
int ret;
mutex_lock(&info->mutex);
ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
2, status);
if (ret) {
dev_err(info->dev, "failed to read muic register\n");
mutex_unlock(&info->mutex);
return;
}
dev_dbg(info->dev, "%s: STATUS1:0x%x, 2:0x%x\n", __func__,
status[0], status[1]);
switch (irq_type) {
case MAX8997_MUICIRQ_ADC:
adc = status[0] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
max8997_muic_handle_adc(info, adc);
break;
case MAX8997_MUICIRQ_ChgTyp:
chg_type = status[1] & STATUS2_CHGTYP_MASK;
chg_type >>= STATUS2_CHGTYP_SHIFT;
max8997_muic_handle_charger_type(info, chg_type);
break;
default:
dev_info(info->dev, "misc interrupt: irq %d occurred\n",
irq_type);
break;
}
mutex_unlock(&info->mutex);
return;
}
static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
{
struct max8997_muic_info *info = data;
dev_dbg(info->dev, "irq:%d\n", irq);
info->irq = irq;
schedule_work(&info->irq_work);
return IRQ_HANDLED;
}
static void max8997_muic_detect_dev(struct max8997_muic_info *info)
{
int ret;
u8 status[2], adc, chg_type;
ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
2, status);
if (ret) {
dev_err(info->dev, "failed to read muic register\n");
return;
}
dev_info(info->dev, "STATUS1:0x%x, STATUS2:0x%x\n",
status[0], status[1]);
adc = status[0] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
chg_type = status[1] & STATUS2_CHGTYP_MASK;
chg_type >>= STATUS2_CHGTYP_SHIFT;
max8997_muic_handle_adc(info, adc);
max8997_muic_handle_charger_type(info, chg_type);
}
static int __devinit max8997_muic_probe(struct platform_device *pdev)
{
struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
struct max8997_muic_info *info;
int ret, i;
info = kzalloc(sizeof(struct max8997_muic_info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
ret = -ENOMEM;
goto err_kfree;
}
info->dev = &pdev->dev;
info->muic = max8997->muic;
platform_set_drvdata(pdev, info);
mutex_init(&info->mutex);
INIT_WORK(&info->irq_work, max8997_muic_irq_work);
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
struct max8997_muic_irq *muic_irq = &muic_irqs[i];
ret = request_threaded_irq(pdata->irq_base + muic_irq->irq,
NULL, max8997_muic_irq_handler,
0, muic_irq->name,
info);
if (ret) {
dev_err(&pdev->dev,
"failed: irq request (IRQ: %d,"
" error :%d)\n",
muic_irq->irq, ret);
goto err_irq;
}
}
/* External connector */
info->edev = kzalloc(sizeof(struct extcon_dev), GFP_KERNEL);
if (!info->edev) {
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
ret = -ENOMEM;
goto err_irq;
}
info->edev->name = DEV_NAME;
info->edev->supported_cable = max8997_extcon_cable;
ret = extcon_dev_register(info->edev, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to register extcon device\n");
goto err_extcon;
}
/* Initialize registers according to platform data */
if (pdata->muic_pdata) {
struct max8997_muic_platform_data *mdata = info->muic_pdata;
for (i = 0; i < mdata->num_init_data; i++) {
max8997_write_reg(info->muic, mdata->init_data[i].addr,
mdata->init_data[i].data);
}
}
/* Initial device detection */
max8997_muic_detect_dev(info);
return ret;
err_extcon:
kfree(info->edev);
err_irq:
while (--i >= 0)
free_irq(pdata->irq_base + muic_irqs[i].irq, info);
kfree(info);
err_kfree:
return ret;
}
static int __devexit max8997_muic_remove(struct platform_device *pdev)
{
struct max8997_muic_info *info = platform_get_drvdata(pdev);
struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
int i;
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
free_irq(max8997->irq_base + muic_irqs[i].irq, info);
cancel_work_sync(&info->irq_work);
extcon_dev_unregister(info->edev);
kfree(info);
return 0;
}
static struct platform_driver max8997_muic_driver = {
.driver = {
.name = DEV_NAME,
.owner = THIS_MODULE,
},
.probe = max8997_muic_probe,
.remove = __devexit_p(max8997_muic_remove),
};
module_platform_driver(max8997_muic_driver);
MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");