linux_dsm_epyc7002/include/linux/qed/qed_fcoe_if.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

152 lines
4.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _QED_FCOE_IF_H
#define _QED_FCOE_IF_H
#include <linux/types.h>
#include <linux/qed/qed_if.h>
struct qed_fcoe_stats {
u64 fcoe_rx_byte_cnt;
u64 fcoe_rx_data_pkt_cnt;
u64 fcoe_rx_xfer_pkt_cnt;
u64 fcoe_rx_other_pkt_cnt;
u32 fcoe_silent_drop_pkt_cmdq_full_cnt;
u32 fcoe_silent_drop_pkt_rq_full_cnt;
u32 fcoe_silent_drop_pkt_crc_error_cnt;
u32 fcoe_silent_drop_pkt_task_invalid_cnt;
u32 fcoe_silent_drop_total_pkt_cnt;
u64 fcoe_tx_byte_cnt;
u64 fcoe_tx_data_pkt_cnt;
u64 fcoe_tx_xfer_pkt_cnt;
u64 fcoe_tx_other_pkt_cnt;
};
struct qed_dev_fcoe_info {
struct qed_dev_info common;
void __iomem *primary_dbq_rq_addr;
void __iomem *secondary_bdq_rq_addr;
u64 wwpn;
u64 wwnn;
u8 num_cqs;
};
struct qed_fcoe_params_offload {
dma_addr_t sq_pbl_addr;
dma_addr_t sq_curr_page_addr;
dma_addr_t sq_next_page_addr;
u8 src_mac[ETH_ALEN];
u8 dst_mac[ETH_ALEN];
u16 tx_max_fc_pay_len;
u16 e_d_tov_timer_val;
u16 rec_tov_timer_val;
u16 rx_max_fc_pay_len;
u16 vlan_tag;
struct fc_addr_nw s_id;
u8 max_conc_seqs_c3;
struct fc_addr_nw d_id;
u8 flags;
u8 def_q_idx;
};
#define MAX_TID_BLOCKS_FCOE (512)
struct qed_fcoe_tid {
u32 size; /* In bytes per task */
u32 num_tids_per_block;
u8 *blocks[MAX_TID_BLOCKS_FCOE];
};
struct qed_fcoe_cb_ops {
struct qed_common_cb_ops common;
u32 (*get_login_failures)(void *cookie);
};
void qed_fcoe_set_pf_params(struct qed_dev *cdev,
struct qed_fcoe_pf_params *params);
/**
* struct qed_fcoe_ops - qed FCoE operations.
* @common: common operations pointer
* @fill_dev_info: fills FCoE specific information
* @param cdev
* @param info
* @return 0 on sucesss, otherwise error value.
* @register_ops: register FCoE operations
* @param cdev
* @param ops - specified using qed_iscsi_cb_ops
* @param cookie - driver private
* @ll2: light L2 operations pointer
* @start: fcoe in FW
* @param cdev
* @param tasks - qed will fill information about tasks
* return 0 on success, otherwise error value.
* @stop: stops fcoe in FW
* @param cdev
* return 0 on success, otherwise error value.
* @acquire_conn: acquire a new fcoe connection
* @param cdev
* @param handle - qed will fill handle that should be
* used henceforth as identifier of the
* connection.
* @param p_doorbell - qed will fill the address of the
* doorbell.
* return 0 on sucesss, otherwise error value.
* @release_conn: release a previously acquired fcoe connection
* @param cdev
* @param handle - the connection handle.
* return 0 on success, otherwise error value.
* @offload_conn: configures an offloaded connection
* @param cdev
* @param handle - the connection handle.
* @param conn_info - the configuration to use for the
* offload.
* return 0 on success, otherwise error value.
* @destroy_conn: stops an offloaded connection
* @param cdev
* @param handle - the connection handle.
* @param terminate_params
* return 0 on success, otherwise error value.
* @get_stats: gets FCoE related statistics
* @param cdev
* @param stats - pointer to struck that would be filled
* we stats
* return 0 on success, error otherwise.
*/
struct qed_fcoe_ops {
const struct qed_common_ops *common;
int (*fill_dev_info)(struct qed_dev *cdev,
struct qed_dev_fcoe_info *info);
void (*register_ops)(struct qed_dev *cdev,
struct qed_fcoe_cb_ops *ops, void *cookie);
const struct qed_ll2_ops *ll2;
int (*start)(struct qed_dev *cdev, struct qed_fcoe_tid *tasks);
int (*stop)(struct qed_dev *cdev);
int (*acquire_conn)(struct qed_dev *cdev,
u32 *handle,
u32 *fw_cid, void __iomem **p_doorbell);
int (*release_conn)(struct qed_dev *cdev, u32 handle);
int (*offload_conn)(struct qed_dev *cdev,
u32 handle,
struct qed_fcoe_params_offload *conn_info);
int (*destroy_conn)(struct qed_dev *cdev,
u32 handle, dma_addr_t terminate_params);
int (*get_stats)(struct qed_dev *cdev, struct qed_fcoe_stats *stats);
};
const struct qed_fcoe_ops *qed_get_fcoe_ops(void);
void qed_put_fcoe_ops(void);
#endif