mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 17:56:50 +07:00
6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
352 lines
8.1 KiB
C
352 lines
8.1 KiB
C
/*
|
|
* Helper functions for the PM3386s on the Radisys ENP2611
|
|
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
|
|
* Dedicated to Marija Kulikova.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <asm/io.h>
|
|
#include "pm3386.h"
|
|
|
|
/*
|
|
* Read from register 'reg' of PM3386 device 'pm'.
|
|
*/
|
|
static u16 pm3386_reg_read(int pm, int reg)
|
|
{
|
|
void *_reg;
|
|
u16 value;
|
|
|
|
_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
|
|
if (pm == 1)
|
|
_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
|
|
|
|
value = *((volatile u16 *)(_reg + (reg << 1)));
|
|
|
|
// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
|
|
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
* Write to register 'reg' of PM3386 device 'pm', and perform
|
|
* a readback from the identification register.
|
|
*/
|
|
static void pm3386_reg_write(int pm, int reg, u16 value)
|
|
{
|
|
void *_reg;
|
|
u16 dummy;
|
|
|
|
// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
|
|
|
|
_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
|
|
if (pm == 1)
|
|
_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
|
|
|
|
*((volatile u16 *)(_reg + (reg << 1))) = value;
|
|
|
|
dummy = *((volatile u16 *)_reg);
|
|
__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
|
|
}
|
|
|
|
/*
|
|
* Read from port 'port' register 'reg', where the registers
|
|
* for the different ports are 'spacing' registers apart.
|
|
*/
|
|
static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
|
|
{
|
|
int reg;
|
|
|
|
reg = _reg;
|
|
if (port & 1)
|
|
reg += spacing;
|
|
|
|
return pm3386_reg_read(port >> 1, reg);
|
|
}
|
|
|
|
/*
|
|
* Write to port 'port' register 'reg', where the registers
|
|
* for the different ports are 'spacing' registers apart.
|
|
*/
|
|
static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
|
|
{
|
|
int reg;
|
|
|
|
reg = _reg;
|
|
if (port & 1)
|
|
reg += spacing;
|
|
|
|
pm3386_reg_write(port >> 1, reg, value);
|
|
}
|
|
|
|
int pm3386_secondary_present(void)
|
|
{
|
|
return pm3386_reg_read(1, 0) == 0x3386;
|
|
}
|
|
|
|
void pm3386_reset(void)
|
|
{
|
|
u8 mac[3][6];
|
|
int secondary;
|
|
|
|
secondary = pm3386_secondary_present();
|
|
|
|
/* Save programmed MAC addresses. */
|
|
pm3386_get_mac(0, mac[0]);
|
|
pm3386_get_mac(1, mac[1]);
|
|
if (secondary)
|
|
pm3386_get_mac(2, mac[2]);
|
|
|
|
/* Assert analog and digital reset. */
|
|
pm3386_reg_write(0, 0x002, 0x0060);
|
|
if (secondary)
|
|
pm3386_reg_write(1, 0x002, 0x0060);
|
|
mdelay(1);
|
|
|
|
/* Deassert analog reset. */
|
|
pm3386_reg_write(0, 0x002, 0x0062);
|
|
if (secondary)
|
|
pm3386_reg_write(1, 0x002, 0x0062);
|
|
mdelay(10);
|
|
|
|
/* Deassert digital reset. */
|
|
pm3386_reg_write(0, 0x002, 0x0063);
|
|
if (secondary)
|
|
pm3386_reg_write(1, 0x002, 0x0063);
|
|
mdelay(10);
|
|
|
|
/* Restore programmed MAC addresses. */
|
|
pm3386_set_mac(0, mac[0]);
|
|
pm3386_set_mac(1, mac[1]);
|
|
if (secondary)
|
|
pm3386_set_mac(2, mac[2]);
|
|
|
|
/* Disable carrier on all ports. */
|
|
pm3386_set_carrier(0, 0);
|
|
pm3386_set_carrier(1, 0);
|
|
if (secondary)
|
|
pm3386_set_carrier(2, 0);
|
|
}
|
|
|
|
static u16 swaph(u16 x)
|
|
{
|
|
return ((x << 8) | (x >> 8)) & 0xffff;
|
|
}
|
|
|
|
int pm3386_port_count(void)
|
|
{
|
|
return 2 + pm3386_secondary_present();
|
|
}
|
|
|
|
void pm3386_init_port(int port)
|
|
{
|
|
int pm = port >> 1;
|
|
|
|
/*
|
|
* Work around ENP2611 bootloader programming MAC address
|
|
* in reverse.
|
|
*/
|
|
if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
|
|
(pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
|
|
u16 temp[3];
|
|
|
|
temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
|
|
temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
|
|
temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
|
|
pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
|
|
pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
|
|
pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
|
|
}
|
|
|
|
/*
|
|
* Initialise narrowbanding mode. See application note 2010486
|
|
* for more information. (@@@ We also need to issue a reset
|
|
* when ROOL or DOOL are detected.)
|
|
*/
|
|
pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
|
|
udelay(500);
|
|
pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
|
|
|
|
/*
|
|
* SPI-3 ingress block. Set 64 bytes SPI-3 burst size
|
|
* towards SPI-3 bridge.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
|
|
|
|
/*
|
|
* Enable ingress protocol checking, and soft reset the
|
|
* SPI-3 ingress block.
|
|
*/
|
|
pm3386_reg_write(pm, 0x103, 0x0003);
|
|
while (!(pm3386_reg_read(pm, 0x103) & 0x80))
|
|
;
|
|
|
|
/*
|
|
* SPI-3 egress block. Gather 12288 bytes of the current
|
|
* packet in the TX fifo before initiating transmit on the
|
|
* SERDES interface. (Prevents TX underflows.)
|
|
*/
|
|
pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
|
|
|
|
/*
|
|
* Enforce odd parity from the SPI-3 bridge, and soft reset
|
|
* the SPI-3 egress block.
|
|
*/
|
|
pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
|
|
while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
|
|
;
|
|
|
|
/*
|
|
* EGMAC block. Set this channels to reject long preambles,
|
|
* not send or transmit PAUSE frames, enable preamble checking,
|
|
* disable frame length checking, enable FCS appending, enable
|
|
* TX frame padding.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
|
|
|
|
/*
|
|
* Soft reset the EGMAC block.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
|
|
pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
|
|
|
|
/*
|
|
* Auto-sense autonegotiation status.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
|
|
|
|
/*
|
|
* Allow reception of jumbo frames.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x310, 0x100, 9018);
|
|
|
|
/*
|
|
* Allow transmission of jumbo frames.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x336, 0x100, 9018);
|
|
|
|
/* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */
|
|
|
|
/*
|
|
* Set autonegotiation parameters to 'no PAUSE, full duplex.'
|
|
*/
|
|
pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
|
|
|
|
/*
|
|
* Enable and restart autonegotiation.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
|
|
pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
|
|
}
|
|
|
|
void pm3386_get_mac(int port, u8 *mac)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x308, 0x100);
|
|
mac[0] = temp & 0xff;
|
|
mac[1] = (temp >> 8) & 0xff;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x309, 0x100);
|
|
mac[2] = temp & 0xff;
|
|
mac[3] = (temp >> 8) & 0xff;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x30a, 0x100);
|
|
mac[4] = temp & 0xff;
|
|
mac[5] = (temp >> 8) & 0xff;
|
|
}
|
|
|
|
void pm3386_set_mac(int port, u8 *mac)
|
|
{
|
|
pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]);
|
|
pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]);
|
|
pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]);
|
|
}
|
|
|
|
static u32 pm3386_get_stat(int port, u16 base)
|
|
{
|
|
u32 value;
|
|
|
|
value = pm3386_port_reg_read(port, base, 0x100);
|
|
value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
|
|
|
|
return value;
|
|
}
|
|
|
|
void pm3386_get_stats(int port, struct net_device_stats *stats)
|
|
{
|
|
/*
|
|
* Snapshot statistics counters.
|
|
*/
|
|
pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
|
|
while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
|
|
;
|
|
|
|
memset(stats, 0, sizeof(*stats));
|
|
|
|
stats->rx_packets = pm3386_get_stat(port, 0x510);
|
|
stats->tx_packets = pm3386_get_stat(port, 0x590);
|
|
stats->rx_bytes = pm3386_get_stat(port, 0x514);
|
|
stats->tx_bytes = pm3386_get_stat(port, 0x594);
|
|
/* @@@ Add other stats. */
|
|
}
|
|
|
|
void pm3386_set_carrier(int port, int state)
|
|
{
|
|
pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000);
|
|
}
|
|
|
|
int pm3386_is_link_up(int port)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x31a, 0x100);
|
|
temp = pm3386_port_reg_read(port, 0x31a, 0x100);
|
|
|
|
return !!(temp & 0x0002);
|
|
}
|
|
|
|
void pm3386_enable_rx(int port)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x303, 0x100);
|
|
temp |= 0x1000;
|
|
pm3386_port_reg_write(port, 0x303, 0x100, temp);
|
|
}
|
|
|
|
void pm3386_disable_rx(int port)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x303, 0x100);
|
|
temp &= 0xefff;
|
|
pm3386_port_reg_write(port, 0x303, 0x100, temp);
|
|
}
|
|
|
|
void pm3386_enable_tx(int port)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x303, 0x100);
|
|
temp |= 0x4000;
|
|
pm3386_port_reg_write(port, 0x303, 0x100, temp);
|
|
}
|
|
|
|
void pm3386_disable_tx(int port)
|
|
{
|
|
u16 temp;
|
|
|
|
temp = pm3386_port_reg_read(port, 0x303, 0x100);
|
|
temp &= 0xbfff;
|
|
pm3386_port_reg_write(port, 0x303, 0x100, temp);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|