mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 16:45:02 +07:00
977d49e00d
Now that we don't need the I2C address for the device the platform data is redundant so allow it to be omitted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Chaithrika U S <chaithrika@ti.com>
1467 lines
47 KiB
C
1467 lines
47 KiB
C
/*
|
|
* ALSA SoC TLV320AIC3X codec driver
|
|
*
|
|
* Author: Vladimir Barinov, <vbarinov@embeddedalley.com>
|
|
* Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
|
|
*
|
|
* Based on sound/soc/codecs/wm8753.c by Liam Girdwood
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Notes:
|
|
* The AIC3X is a driver for a low power stereo audio
|
|
* codecs aic31, aic32, aic33.
|
|
*
|
|
* It supports full aic33 codec functionality.
|
|
* The compatibility with aic32, aic31 is as follows:
|
|
* aic32 | aic31
|
|
* ---------------------------------------
|
|
* MONO_LOUT -> N/A | MONO_LOUT -> N/A
|
|
* | IN1L -> LINE1L
|
|
* | IN1R -> LINE1R
|
|
* | IN2L -> LINE2L
|
|
* | IN2R -> LINE2R
|
|
* | MIC3L/R -> N/A
|
|
* truncated internal functionality in
|
|
* accordance with documentation
|
|
* ---------------------------------------
|
|
*
|
|
* Hence the machine layer should disable unsupported inputs/outputs by
|
|
* snd_soc_dapm_disable_pin(codec, "MONO_LOUT"), etc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "tlv320aic3x.h"
|
|
|
|
#define AIC3X_VERSION "0.2"
|
|
|
|
/* codec private data */
|
|
struct aic3x_priv {
|
|
struct snd_soc_codec codec;
|
|
unsigned int sysclk;
|
|
int master;
|
|
};
|
|
|
|
/*
|
|
* AIC3X register cache
|
|
* We can't read the AIC3X register space when we are
|
|
* using 2 wire for device control, so we cache them instead.
|
|
* There is no point in caching the reset register
|
|
*/
|
|
static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = {
|
|
0x00, 0x00, 0x00, 0x10, /* 0 */
|
|
0x04, 0x00, 0x00, 0x00, /* 4 */
|
|
0x00, 0x00, 0x00, 0x01, /* 8 */
|
|
0x00, 0x00, 0x00, 0x80, /* 12 */
|
|
0x80, 0xff, 0xff, 0x78, /* 16 */
|
|
0x78, 0x78, 0x78, 0x78, /* 20 */
|
|
0x78, 0x00, 0x00, 0xfe, /* 24 */
|
|
0x00, 0x00, 0xfe, 0x00, /* 28 */
|
|
0x18, 0x18, 0x00, 0x00, /* 32 */
|
|
0x00, 0x00, 0x00, 0x00, /* 36 */
|
|
0x00, 0x00, 0x00, 0x80, /* 40 */
|
|
0x80, 0x00, 0x00, 0x00, /* 44 */
|
|
0x00, 0x00, 0x00, 0x04, /* 48 */
|
|
0x00, 0x00, 0x00, 0x00, /* 52 */
|
|
0x00, 0x00, 0x04, 0x00, /* 56 */
|
|
0x00, 0x00, 0x00, 0x00, /* 60 */
|
|
0x00, 0x04, 0x00, 0x00, /* 64 */
|
|
0x00, 0x00, 0x00, 0x00, /* 68 */
|
|
0x04, 0x00, 0x00, 0x00, /* 72 */
|
|
0x00, 0x00, 0x00, 0x00, /* 76 */
|
|
0x00, 0x00, 0x00, 0x00, /* 80 */
|
|
0x00, 0x00, 0x00, 0x00, /* 84 */
|
|
0x00, 0x00, 0x00, 0x00, /* 88 */
|
|
0x00, 0x00, 0x00, 0x00, /* 92 */
|
|
0x00, 0x00, 0x00, 0x00, /* 96 */
|
|
0x00, 0x00, 0x02, /* 100 */
|
|
};
|
|
|
|
/*
|
|
* read aic3x register cache
|
|
*/
|
|
static inline unsigned int aic3x_read_reg_cache(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
u8 *cache = codec->reg_cache;
|
|
if (reg >= AIC3X_CACHEREGNUM)
|
|
return -1;
|
|
return cache[reg];
|
|
}
|
|
|
|
/*
|
|
* write aic3x register cache
|
|
*/
|
|
static inline void aic3x_write_reg_cache(struct snd_soc_codec *codec,
|
|
u8 reg, u8 value)
|
|
{
|
|
u8 *cache = codec->reg_cache;
|
|
if (reg >= AIC3X_CACHEREGNUM)
|
|
return;
|
|
cache[reg] = value;
|
|
}
|
|
|
|
/*
|
|
* write to the aic3x register space
|
|
*/
|
|
static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
u8 data[2];
|
|
|
|
/* data is
|
|
* D15..D8 aic3x register offset
|
|
* D7...D0 register data
|
|
*/
|
|
data[0] = reg & 0xff;
|
|
data[1] = value & 0xff;
|
|
|
|
aic3x_write_reg_cache(codec, data[0], data[1]);
|
|
if (codec->hw_write(codec->control_data, data, 2) == 2)
|
|
return 0;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* read from the aic3x register space
|
|
*/
|
|
static int aic3x_read(struct snd_soc_codec *codec, unsigned int reg,
|
|
u8 *value)
|
|
{
|
|
*value = reg & 0xff;
|
|
|
|
value[0] = i2c_smbus_read_byte_data(codec->control_data, value[0]);
|
|
|
|
aic3x_write_reg_cache(codec, reg, *value);
|
|
return 0;
|
|
}
|
|
|
|
#define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_soc_info_volsw, \
|
|
.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw_aic3x, \
|
|
.private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) }
|
|
|
|
/*
|
|
* All input lines are connected when !0xf and disconnected with 0xf bit field,
|
|
* so we have to use specific dapm_put call for input mixer
|
|
*/
|
|
static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
int max = mc->max;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
unsigned int invert = mc->invert;
|
|
unsigned short val, val_mask;
|
|
int ret;
|
|
struct snd_soc_dapm_path *path;
|
|
int found = 0;
|
|
|
|
val = (ucontrol->value.integer.value[0] & mask);
|
|
|
|
mask = 0xf;
|
|
if (val)
|
|
val = mask;
|
|
|
|
if (invert)
|
|
val = mask - val;
|
|
val_mask = mask << shift;
|
|
val = val << shift;
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
|
|
if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) {
|
|
/* find dapm widget path assoc with kcontrol */
|
|
list_for_each_entry(path, &widget->codec->dapm_paths, list) {
|
|
if (path->kcontrol != kcontrol)
|
|
continue;
|
|
|
|
/* found, now check type */
|
|
found = 1;
|
|
if (val)
|
|
/* new connection */
|
|
path->connect = invert ? 0 : 1;
|
|
else
|
|
/* old connection must be powered down */
|
|
path->connect = invert ? 1 : 0;
|
|
break;
|
|
}
|
|
|
|
if (found)
|
|
snd_soc_dapm_sync(widget->codec);
|
|
}
|
|
|
|
ret = snd_soc_update_bits(widget->codec, reg, val_mask, val);
|
|
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static const char *aic3x_left_dac_mux[] = { "DAC_L1", "DAC_L3", "DAC_L2" };
|
|
static const char *aic3x_right_dac_mux[] = { "DAC_R1", "DAC_R3", "DAC_R2" };
|
|
static const char *aic3x_left_hpcom_mux[] =
|
|
{ "differential of HPLOUT", "constant VCM", "single-ended" };
|
|
static const char *aic3x_right_hpcom_mux[] =
|
|
{ "differential of HPROUT", "constant VCM", "single-ended",
|
|
"differential of HPLCOM", "external feedback" };
|
|
static const char *aic3x_linein_mode_mux[] = { "single-ended", "differential" };
|
|
static const char *aic3x_adc_hpf[] =
|
|
{ "Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" };
|
|
|
|
#define LDAC_ENUM 0
|
|
#define RDAC_ENUM 1
|
|
#define LHPCOM_ENUM 2
|
|
#define RHPCOM_ENUM 3
|
|
#define LINE1L_ENUM 4
|
|
#define LINE1R_ENUM 5
|
|
#define LINE2L_ENUM 6
|
|
#define LINE2R_ENUM 7
|
|
#define ADC_HPF_ENUM 8
|
|
|
|
static const struct soc_enum aic3x_enum[] = {
|
|
SOC_ENUM_SINGLE(DAC_LINE_MUX, 6, 3, aic3x_left_dac_mux),
|
|
SOC_ENUM_SINGLE(DAC_LINE_MUX, 4, 3, aic3x_right_dac_mux),
|
|
SOC_ENUM_SINGLE(HPLCOM_CFG, 4, 3, aic3x_left_hpcom_mux),
|
|
SOC_ENUM_SINGLE(HPRCOM_CFG, 3, 5, aic3x_right_hpcom_mux),
|
|
SOC_ENUM_SINGLE(LINE1L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE1R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE2L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE2R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_DOUBLE(AIC3X_CODEC_DFILT_CTRL, 6, 4, 4, aic3x_adc_hpf),
|
|
};
|
|
|
|
/*
|
|
* DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0);
|
|
/* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0);
|
|
/*
|
|
* Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB.
|
|
* Step size is approximately 0.5 dB over most of the scale but increasing
|
|
* near the very low levels.
|
|
* Define dB scale so that it is mostly correct for range about -55 to 0 dB
|
|
* but having increasing dB difference below that (and where it doesn't count
|
|
* so much). This setting shows -50 dB (actual is -50.3 dB) for register
|
|
* value 100 and -58.5 dB (actual is -78.3 dB) for register value 117.
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1);
|
|
|
|
static const struct snd_kcontrol_new aic3x_snd_controls[] = {
|
|
/* Output */
|
|
SOC_DOUBLE_R_TLV("PCM Playback Volume",
|
|
LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("Line DAC Playback Volume",
|
|
DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE("LineL Playback Switch", LLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_SINGLE("LineR Playback Switch", RLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_DOUBLE_R_TLV("LineL DAC Playback Volume",
|
|
DACL1_2_LLOPM_VOL, DACR1_2_LLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("LineL Left PGA Bypass Playback Volume",
|
|
PGAL_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("LineR Right PGA Bypass Playback Volume",
|
|
PGAR_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("LineL Line2 Bypass Playback Volume",
|
|
LINE2L_2_LLOPM_VOL, LINE2R_2_LLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("LineR Line2 Bypass Playback Volume",
|
|
LINE2L_2_RLOPM_VOL, LINE2R_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("Mono DAC Playback Volume",
|
|
DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE("Mono DAC Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_DOUBLE_R_TLV("Mono PGA Bypass Playback Volume",
|
|
PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("Mono Line2 Bypass Playback Volume",
|
|
LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HP DAC Playback Volume",
|
|
DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_DOUBLE_R_TLV("HP Right PGA Bypass Playback Volume",
|
|
PGAR_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPL PGA Bypass Playback Volume",
|
|
PGAL_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPR PGA Bypass Playback Volume",
|
|
PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HP Line2 Bypass Playback Volume",
|
|
LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume",
|
|
DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_SINGLE_TLV("HPLCOM PGA Bypass Playback Volume",
|
|
PGAL_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPRCOM PGA Bypass Playback Volume",
|
|
PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Playback Volume",
|
|
LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
/*
|
|
* Note: enable Automatic input Gain Controller with care. It can
|
|
* adjust PGA to max value when ADC is on and will never go back.
|
|
*/
|
|
SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0),
|
|
|
|
/* Input */
|
|
SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL,
|
|
0, 119, 0, adc_tlv),
|
|
SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1),
|
|
|
|
SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]),
|
|
};
|
|
|
|
/* Left DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]);
|
|
|
|
/* Right DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[RDAC_ENUM]);
|
|
|
|
/* Left HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LHPCOM_ENUM]);
|
|
|
|
/* Right HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[RHPCOM_ENUM]);
|
|
|
|
/* Left DAC_L1 Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_dac_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", DACL1_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", DACL1_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPCOM Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right DAC_R1 Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_dac_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", DACR1_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", DACR1_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", DACR1_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPCOM Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Right PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Left Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line1_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE1L_ENUM]);
|
|
|
|
/* Right Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line1_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE1R_ENUM]);
|
|
|
|
/* Left Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE2L_ENUM]);
|
|
|
|
/* Right Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE2R_ENUM]);
|
|
|
|
/* Left PGA Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_pga_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", PGAL_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", PGAL_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPL Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPR Switch", PGAL_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right PGA Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_pga_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", PGAR_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", PGAR_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPL Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPR Switch", PGAR_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left Line2 Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_line2_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right Line2 Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_line2_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
|
|
/* Left DAC to Left Outputs */
|
|
SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0),
|
|
SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_dac_mux_controls),
|
|
SND_SOC_DAPM_MIXER("Left DAC_L1 Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_dac_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_dac_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Right DAC to Right Outputs */
|
|
SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0),
|
|
SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_dac_mux_controls),
|
|
SND_SOC_DAPM_MIXER("Right DAC_R1 Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_dac_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_dac_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Mono Output */
|
|
SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Inputs to Left ADC */
|
|
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line2_mux_controls),
|
|
|
|
/* Inputs to Right ADC */
|
|
SND_SOC_DAPM_ADC("Right ADC", "Right Capture",
|
|
LINE1R_2_RADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line2_mux_controls),
|
|
|
|
/*
|
|
* Not a real mic bias widget but similar function. This is for dynamic
|
|
* control of GPIO1 digital mic modulator clock output function when
|
|
* using digital mic.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "GPIO1 dmic modclk",
|
|
AIC3X_GPIO1_REG, 4, 0xf,
|
|
AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK,
|
|
AIC3X_GPIO1_FUNC_DISABLED),
|
|
|
|
/*
|
|
* Also similar function like mic bias. Selects digital mic with
|
|
* configurable oversampling rate instead of ADC converter.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 128",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 1, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 64",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 2, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 32",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0),
|
|
|
|
/* Mic Bias */
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2V",
|
|
MICBIAS_CTRL, 6, 3, 1, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2.5V",
|
|
MICBIAS_CTRL, 6, 3, 2, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias AVDD",
|
|
MICBIAS_CTRL, 6, 3, 3, 0),
|
|
|
|
/* Left PGA to Left Output bypass */
|
|
SND_SOC_DAPM_MIXER("Left PGA Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_pga_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_pga_bp_mixer_controls)),
|
|
|
|
/* Right PGA to Right Output bypass */
|
|
SND_SOC_DAPM_MIXER("Right PGA Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_pga_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_pga_bp_mixer_controls)),
|
|
|
|
/* Left Line2 to Left Output bypass */
|
|
SND_SOC_DAPM_MIXER("Left Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line2_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_line2_bp_mixer_controls)),
|
|
|
|
/* Right Line2 to Right Output bypass */
|
|
SND_SOC_DAPM_MIXER("Right Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line2_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_line2_bp_mixer_controls)),
|
|
|
|
SND_SOC_DAPM_OUTPUT("LLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("RLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("MONO_LOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPROUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLCOM"),
|
|
SND_SOC_DAPM_OUTPUT("HPRCOM"),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC3L"),
|
|
SND_SOC_DAPM_INPUT("MIC3R"),
|
|
SND_SOC_DAPM_INPUT("LINE1L"),
|
|
SND_SOC_DAPM_INPUT("LINE1R"),
|
|
SND_SOC_DAPM_INPUT("LINE2L"),
|
|
SND_SOC_DAPM_INPUT("LINE2R"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
/* Left Output */
|
|
{"Left DAC Mux", "DAC_L1", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L2", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L3", "Left DAC"},
|
|
|
|
{"Left DAC_L1 Mixer", "LineL Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "LineR Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "Mono Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "HP Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "HPCOM Switch", "Left DAC Mux"},
|
|
{"Left Line Out", NULL, "Left DAC Mux"},
|
|
{"Left HP Out", NULL, "Left DAC Mux"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left DAC_L1 Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left DAC_L1 Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left DAC_L1 Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Mono Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Left HP Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Left HP Com", NULL, "Left HPCOM Mux"},
|
|
|
|
{"LLOUT", NULL, "Left Line Out"},
|
|
{"LLOUT", NULL, "Left Line Out"},
|
|
{"HPLOUT", NULL, "Left HP Out"},
|
|
{"HPLCOM", NULL, "Left HP Com"},
|
|
|
|
/* Right Output */
|
|
{"Right DAC Mux", "DAC_R1", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R2", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R3", "Right DAC"},
|
|
|
|
{"Right DAC_R1 Mixer", "LineL Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "LineR Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "Mono Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "HP Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "HPCOM Switch", "Right DAC Mux"},
|
|
{"Right Line Out", NULL, "Right DAC Mux"},
|
|
{"Right HP Out", NULL, "Right DAC Mux"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right DAC_R1 Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Mono Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Right HP Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Right HP Com", NULL, "Right HPCOM Mux"},
|
|
|
|
{"RLOUT", NULL, "Right Line Out"},
|
|
{"RLOUT", NULL, "Right Line Out"},
|
|
{"HPROUT", NULL, "Right HP Out"},
|
|
{"HPRCOM", NULL, "Right HP Com"},
|
|
|
|
/* Mono Output */
|
|
{"MONO_LOUT", NULL, "Mono Out"},
|
|
{"MONO_LOUT", NULL, "Mono Out"},
|
|
|
|
/* Left Input */
|
|
{"Left Line1L Mux", "single-ended", "LINE1L"},
|
|
{"Left Line1L Mux", "differential", "LINE1L"},
|
|
|
|
{"Left Line2L Mux", "single-ended", "LINE2L"},
|
|
{"Left Line2L Mux", "differential", "LINE2L"},
|
|
|
|
{"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"},
|
|
{"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"},
|
|
{"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"},
|
|
{"Left PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Left PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Left ADC", NULL, "Left PGA Mixer"},
|
|
{"Left ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/* Right Input */
|
|
{"Right Line1R Mux", "single-ended", "LINE1R"},
|
|
{"Right Line1R Mux", "differential", "LINE1R"},
|
|
|
|
{"Right Line2R Mux", "single-ended", "LINE2R"},
|
|
{"Right Line2R Mux", "differential", "LINE2R"},
|
|
|
|
{"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"},
|
|
{"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"},
|
|
{"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"},
|
|
{"Right PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Right PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Right ADC", NULL, "Right PGA Mixer"},
|
|
{"Right ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/* Left PGA Bypass */
|
|
{"Left PGA Bypass Mixer", "LineL Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "LineR Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "Mono Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPL Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPR Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPLCOM Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPRCOM Switch", "Left PGA Mixer"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left PGA Bypass Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left PGA Bypass Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left PGA Bypass Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left PGA Bypass Mixer"},
|
|
{"Mono Out", NULL, "Left PGA Bypass Mixer"},
|
|
{"Left HP Out", NULL, "Left PGA Bypass Mixer"},
|
|
|
|
/* Right PGA Bypass */
|
|
{"Right PGA Bypass Mixer", "LineL Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "LineR Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "Mono Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPL Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPR Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPLCOM Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPRCOM Switch", "Right PGA Mixer"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right PGA Bypass Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right PGA Bypass Mixer"},
|
|
{"Mono Out", NULL, "Right PGA Bypass Mixer"},
|
|
{"Right HP Out", NULL, "Right PGA Bypass Mixer"},
|
|
|
|
/* Left Line2 Bypass */
|
|
{"Left Line2 Bypass Mixer", "LineL Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "LineR Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "Mono Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "HP Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "HPLCOM Switch", "Left Line2L Mux"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left Line2 Bypass Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left Line2 Bypass Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left Line2 Bypass Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left Line2 Bypass Mixer"},
|
|
{"Mono Out", NULL, "Left Line2 Bypass Mixer"},
|
|
{"Left HP Out", NULL, "Left Line2 Bypass Mixer"},
|
|
|
|
/* Right Line2 Bypass */
|
|
{"Right Line2 Bypass Mixer", "LineL Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "LineR Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "Mono Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "HP Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "HPRCOM Switch", "Right Line2R Mux"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right Line2 Bypass Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right Line2 Bypass Mixer"},
|
|
{"Mono Out", NULL, "Right Line2 Bypass Mixer"},
|
|
{"Right HP Out", NULL, "Right Line2 Bypass Mixer"},
|
|
|
|
/*
|
|
* Logical path between digital mic enable and GPIO1 modulator clock
|
|
* output function
|
|
*/
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 128"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 64"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 32"},
|
|
};
|
|
|
|
static int aic3x_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets,
|
|
ARRAY_SIZE(aic3x_dapm_widgets));
|
|
|
|
/* set up audio path interconnects */
|
|
snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
|
|
|
|
snd_soc_dapm_new_widgets(codec);
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
|
|
u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
|
|
u16 pll_d = 1;
|
|
u8 reg;
|
|
|
|
/* select data word length */
|
|
data =
|
|
aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
data |= (0x01 << 4);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
data |= (0x02 << 4);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
data |= (0x03 << 4);
|
|
break;
|
|
}
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data);
|
|
|
|
/* Fsref can be 44100 or 48000 */
|
|
fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000;
|
|
|
|
/* Try to find a value for Q which allows us to bypass the PLL and
|
|
* generate CODEC_CLK directly. */
|
|
for (pll_q = 2; pll_q < 18; pll_q++)
|
|
if (aic3x->sysclk / (128 * pll_q) == fsref) {
|
|
bypass_pll = 1;
|
|
break;
|
|
}
|
|
|
|
if (bypass_pll) {
|
|
pll_q &= 0xf;
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
|
|
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
|
|
/* disable PLL if it is bypassed */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
|
|
|
|
} else {
|
|
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
|
|
/* enable PLL when it is used */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
|
|
}
|
|
|
|
/* Route Left DAC to left channel input and
|
|
* right DAC to right channel input */
|
|
data = (LDAC2LCH | RDAC2RCH);
|
|
data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000;
|
|
if (params_rate(params) >= 64000)
|
|
data |= DUAL_RATE_MODE;
|
|
aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data);
|
|
|
|
/* codec sample rate select */
|
|
data = (fsref * 20) / params_rate(params);
|
|
if (params_rate(params) < 64000)
|
|
data /= 2;
|
|
data /= 5;
|
|
data -= 2;
|
|
data |= (data << 4);
|
|
aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data);
|
|
|
|
if (bypass_pll)
|
|
return 0;
|
|
|
|
/* Use PLL
|
|
* find an apropriate setup for j, d, r and p by iterating over
|
|
* p and r - j and d are calculated for each fraction.
|
|
* Up to 128 values are probed, the closest one wins the game.
|
|
* The sysclk is divided by 1000 to prevent integer overflows.
|
|
*/
|
|
codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000);
|
|
|
|
for (r = 1; r <= 16; r++)
|
|
for (p = 1; p <= 8; p++) {
|
|
int clk, tmp = (codec_clk * pll_r * 10) / pll_p;
|
|
u8 j = tmp / 10000;
|
|
u16 d = tmp % 10000;
|
|
|
|
if (j > 63)
|
|
continue;
|
|
|
|
if (d != 0 && aic3x->sysclk < 10000000)
|
|
continue;
|
|
|
|
/* This is actually 1000 * ((j + (d/10000)) * r) / p
|
|
* The term had to be converted to get rid of the
|
|
* division by 10000 */
|
|
clk = ((10000 * j * r) + (d * r)) / (10 * p);
|
|
|
|
/* check whether this values get closer than the best
|
|
* ones we had before */
|
|
if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) {
|
|
pll_j = j; pll_d = d; pll_r = r; pll_p = p;
|
|
last_clk = clk;
|
|
}
|
|
|
|
/* Early exit for exact matches */
|
|
if (clk == codec_clk)
|
|
break;
|
|
}
|
|
|
|
if (last_clk == 0) {
|
|
printk(KERN_ERR "%s(): unable to setup PLL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT));
|
|
aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGC_REG, (pll_d >> 6) << PLLD_MSB_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGD_REG,
|
|
(pll_d & 0x3F) << PLLD_LSB_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u8 ldac_reg = aic3x_read_reg_cache(codec, LDAC_VOL) & ~MUTE_ON;
|
|
u8 rdac_reg = aic3x_read_reg_cache(codec, RDAC_VOL) & ~MUTE_ON;
|
|
|
|
if (mute) {
|
|
aic3x_write(codec, LDAC_VOL, ldac_reg | MUTE_ON);
|
|
aic3x_write(codec, RDAC_VOL, rdac_reg | MUTE_ON);
|
|
} else {
|
|
aic3x_write(codec, LDAC_VOL, ldac_reg);
|
|
aic3x_write(codec, RDAC_VOL, rdac_reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
|
|
aic3x->sysclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
u8 iface_areg, iface_breg;
|
|
int delay = 0;
|
|
|
|
iface_areg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f;
|
|
iface_breg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aic3x->master = 1;
|
|
iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
aic3x->master = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* match both interface format and signal polarities since they
|
|
* are fixed
|
|
*/
|
|
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
|
|
SND_SOC_DAIFMT_INV_MASK)) {
|
|
case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
|
|
break;
|
|
case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
|
|
delay = 1;
|
|
case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
|
|
iface_breg |= (0x01 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x02 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x03 << 6);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set iface */
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg);
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg);
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLC, delay);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
u8 reg;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
/* all power is driven by DAPM system */
|
|
if (aic3x->master) {
|
|
/* enable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg | PLL_ENABLE);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
/*
|
|
* all power is driven by DAPM system,
|
|
* so output power is safe if bypass was set
|
|
*/
|
|
if (aic3x->master) {
|
|
/* disable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg & ~PLL_ENABLE);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
/* force all power off */
|
|
reg = aic3x_read_reg_cache(codec, LINE1L_2_LADC_CTRL);
|
|
aic3x_write(codec, LINE1L_2_LADC_CTRL, reg & ~LADC_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, LINE1R_2_RADC_CTRL);
|
|
aic3x_write(codec, LINE1R_2_RADC_CTRL, reg & ~RADC_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, DAC_PWR);
|
|
aic3x_write(codec, DAC_PWR, reg & ~(LDAC_PWR_ON | RDAC_PWR_ON));
|
|
|
|
reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL);
|
|
aic3x_write(codec, HPLOUT_CTRL, reg & ~HPLOUT_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, HPROUT_CTRL);
|
|
aic3x_write(codec, HPROUT_CTRL, reg & ~HPROUT_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL);
|
|
aic3x_write(codec, HPLCOM_CTRL, reg & ~HPLCOM_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL);
|
|
aic3x_write(codec, HPRCOM_CTRL, reg & ~HPRCOM_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL);
|
|
aic3x_write(codec, MONOLOPM_CTRL, reg & ~MONOLOPM_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, LLOPM_CTRL);
|
|
aic3x_write(codec, LLOPM_CTRL, reg & ~LLOPM_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, RLOPM_CTRL);
|
|
aic3x_write(codec, RLOPM_CTRL, reg & ~RLOPM_PWR_ON);
|
|
|
|
if (aic3x->master) {
|
|
/* disable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg & ~PLL_ENABLE);
|
|
}
|
|
break;
|
|
}
|
|
codec->bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state)
|
|
{
|
|
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
|
|
u8 bit = gpio ? 3: 0;
|
|
u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit);
|
|
aic3x_write(codec, reg, val | (!!state << bit));
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_set_gpio);
|
|
|
|
int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
|
|
{
|
|
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
|
|
u8 val, bit = gpio ? 2: 1;
|
|
|
|
aic3x_read(codec, reg, &val);
|
|
return (val >> bit) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_get_gpio);
|
|
|
|
void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect,
|
|
int headset_debounce, int button_debounce)
|
|
{
|
|
u8 val;
|
|
|
|
val = ((detect & AIC3X_HEADSET_DETECT_MASK)
|
|
<< AIC3X_HEADSET_DETECT_SHIFT) |
|
|
((headset_debounce & AIC3X_HEADSET_DEBOUNCE_MASK)
|
|
<< AIC3X_HEADSET_DEBOUNCE_SHIFT) |
|
|
((button_debounce & AIC3X_BUTTON_DEBOUNCE_MASK)
|
|
<< AIC3X_BUTTON_DEBOUNCE_SHIFT);
|
|
|
|
if (detect & AIC3X_HEADSET_DETECT_MASK)
|
|
val |= AIC3X_HEADSET_DETECT_ENABLED;
|
|
|
|
aic3x_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
|
|
|
|
int aic3x_headset_detected(struct snd_soc_codec *codec)
|
|
{
|
|
u8 val;
|
|
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
|
|
return (val >> 4) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_headset_detected);
|
|
|
|
int aic3x_button_pressed(struct snd_soc_codec *codec)
|
|
{
|
|
u8 val;
|
|
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
|
|
return (val >> 5) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_button_pressed);
|
|
|
|
#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000
|
|
#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_ops aic3x_dai_ops = {
|
|
.hw_params = aic3x_hw_params,
|
|
.digital_mute = aic3x_mute,
|
|
.set_sysclk = aic3x_set_dai_sysclk,
|
|
.set_fmt = aic3x_set_dai_fmt,
|
|
};
|
|
|
|
struct snd_soc_dai aic3x_dai = {
|
|
.name = "tlv320aic3x",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.ops = &aic3x_dai_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(aic3x_dai);
|
|
|
|
static int aic3x_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_resume(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
int i;
|
|
u8 data[2];
|
|
u8 *cache = codec->reg_cache;
|
|
|
|
/* Sync reg_cache with the hardware */
|
|
for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) {
|
|
data[0] = i;
|
|
data[1] = cache[i];
|
|
codec->hw_write(codec->control_data, data, 2);
|
|
}
|
|
|
|
aic3x_set_bias_level(codec, codec->suspend_bias_level);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* initialise the AIC3X driver
|
|
* register the mixer and dsp interfaces with the kernel
|
|
*/
|
|
static int aic3x_init(struct snd_soc_codec *codec)
|
|
{
|
|
int reg;
|
|
|
|
mutex_init(&codec->mutex);
|
|
INIT_LIST_HEAD(&codec->dapm_widgets);
|
|
INIT_LIST_HEAD(&codec->dapm_paths);
|
|
|
|
codec->name = "tlv320aic3x";
|
|
codec->owner = THIS_MODULE;
|
|
codec->read = aic3x_read_reg_cache;
|
|
codec->write = aic3x_write;
|
|
codec->set_bias_level = aic3x_set_bias_level;
|
|
codec->dai = &aic3x_dai;
|
|
codec->num_dai = 1;
|
|
codec->reg_cache_size = ARRAY_SIZE(aic3x_reg);
|
|
codec->reg_cache = kmemdup(aic3x_reg, sizeof(aic3x_reg), GFP_KERNEL);
|
|
if (codec->reg_cache == NULL)
|
|
return -ENOMEM;
|
|
|
|
aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
|
|
aic3x_write(codec, AIC3X_RESET, SOFT_RESET);
|
|
|
|
/* DAC default volume and mute */
|
|
aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
|
|
/* DAC to HP default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
/* DAC to Line Out default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
/* DAC to Mono Line Out default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
|
|
/* unmute all outputs */
|
|
reg = aic3x_read_reg_cache(codec, LLOPM_CTRL);
|
|
aic3x_write(codec, LLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, RLOPM_CTRL);
|
|
aic3x_write(codec, RLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL);
|
|
aic3x_write(codec, MONOLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL);
|
|
aic3x_write(codec, HPLOUT_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPROUT_CTRL);
|
|
aic3x_write(codec, HPROUT_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL);
|
|
aic3x_write(codec, HPLCOM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL);
|
|
aic3x_write(codec, HPRCOM_CTRL, reg | UNMUTE);
|
|
|
|
/* ADC default volume and unmute */
|
|
aic3x_write(codec, LADC_VOL, DEFAULT_GAIN);
|
|
aic3x_write(codec, RADC_VOL, DEFAULT_GAIN);
|
|
/* By default route Line1 to ADC PGA mixer */
|
|
aic3x_write(codec, LINE1L_2_LADC_CTRL, 0x0);
|
|
aic3x_write(codec, LINE1R_2_RADC_CTRL, 0x0);
|
|
|
|
/* PGA to HP Bypass default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* PGA to Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
|
|
/* PGA to Mono Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* Line2 Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
|
|
/* Line2 to Mono Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* off, with power on */
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec *aic3x_codec;
|
|
|
|
static int aic3x_register(struct snd_soc_codec *codec)
|
|
{
|
|
int ret;
|
|
|
|
ret = aic3x_init(codec);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to initialise device\n");
|
|
return ret;
|
|
}
|
|
|
|
aic3x_codec = codec;
|
|
|
|
ret = snd_soc_register_codec(codec);
|
|
if (ret) {
|
|
dev_err(codec->dev, "Failed to register codec\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_register_dai(&aic3x_dai);
|
|
if (ret) {
|
|
dev_err(codec->dev, "Failed to register dai\n");
|
|
snd_soc_unregister_codec(codec);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_unregister(struct aic3x_priv *aic3x)
|
|
{
|
|
aic3x_set_bias_level(&aic3x->codec, SND_SOC_BIAS_OFF);
|
|
|
|
snd_soc_unregister_dai(&aic3x_dai);
|
|
snd_soc_unregister_codec(&aic3x->codec);
|
|
|
|
kfree(aic3x);
|
|
aic3x_codec = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
/*
|
|
* AIC3X 2 wire address can be up to 4 devices with device addresses
|
|
* 0x18, 0x19, 0x1A, 0x1B
|
|
*/
|
|
|
|
/*
|
|
* If the i2c layer weren't so broken, we could pass this kind of data
|
|
* around
|
|
*/
|
|
static int aic3x_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct snd_soc_codec *codec;
|
|
struct aic3x_priv *aic3x;
|
|
|
|
aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
|
|
if (aic3x == NULL) {
|
|
dev_err(&i2c->dev, "failed to create private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
codec = &aic3x->codec;
|
|
codec->dev = &i2c->dev;
|
|
codec->private_data = aic3x;
|
|
codec->control_data = i2c;
|
|
codec->hw_write = (hw_write_t) i2c_master_send;
|
|
|
|
i2c_set_clientdata(i2c, aic3x);
|
|
|
|
return aic3x_register(codec);
|
|
}
|
|
|
|
static int aic3x_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct aic3x_priv *aic3x = i2c_get_clientdata(client);
|
|
|
|
return aic3x_unregister(aic3x);
|
|
}
|
|
|
|
static const struct i2c_device_id aic3x_i2c_id[] = {
|
|
{ "tlv320aic3x", 0 },
|
|
{ "tlv320aic33", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
|
|
|
|
/* machine i2c codec control layer */
|
|
static struct i2c_driver aic3x_i2c_driver = {
|
|
.driver = {
|
|
.name = "aic3x I2C Codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = aic3x_i2c_probe,
|
|
.remove = aic3x_i2c_remove,
|
|
.id_table = aic3x_i2c_id,
|
|
};
|
|
|
|
static inline void aic3x_i2c_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_add_driver(&aic3x_i2c_driver);
|
|
if (ret)
|
|
printk(KERN_ERR "%s: error regsitering i2c driver, %d\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
static inline void aic3x_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&aic3x_i2c_driver);
|
|
}
|
|
#else
|
|
static inline void aic3x_i2c_init(void) { }
|
|
static inline void aic3x_i2c_exit(void) { }
|
|
#endif
|
|
|
|
static int aic3x_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct aic3x_setup_data *setup;
|
|
struct snd_soc_codec *codec;
|
|
int ret = 0;
|
|
|
|
codec = aic3x_codec;
|
|
if (!codec) {
|
|
dev_err(&pdev->dev, "Codec not registered\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
socdev->card->codec = codec;
|
|
setup = socdev->codec_data;
|
|
|
|
if (setup) {
|
|
/* setup GPIO functions */
|
|
aic3x_write(codec, AIC3X_GPIO1_REG,
|
|
(setup->gpio_func[0] & 0xf) << 4);
|
|
aic3x_write(codec, AIC3X_GPIO2_REG,
|
|
(setup->gpio_func[1] & 0xf) << 4);
|
|
}
|
|
|
|
/* register pcms */
|
|
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "aic3x: failed to create pcms\n");
|
|
goto pcm_err;
|
|
}
|
|
|
|
snd_soc_add_controls(codec, aic3x_snd_controls,
|
|
ARRAY_SIZE(aic3x_snd_controls));
|
|
|
|
aic3x_add_widgets(codec);
|
|
|
|
ret = snd_soc_init_card(socdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "aic3x: failed to register card\n");
|
|
goto card_err;
|
|
}
|
|
|
|
return ret;
|
|
|
|
card_err:
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
|
|
pcm_err:
|
|
kfree(codec->reg_cache);
|
|
return ret;
|
|
}
|
|
|
|
static int aic3x_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
/* power down chip */
|
|
if (codec->control_data)
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
|
|
kfree(codec->reg_cache);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_aic3x = {
|
|
.probe = aic3x_probe,
|
|
.remove = aic3x_remove,
|
|
.suspend = aic3x_suspend,
|
|
.resume = aic3x_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_codec_dev_aic3x);
|
|
|
|
static int __init aic3x_modinit(void)
|
|
{
|
|
aic3x_i2c_init();
|
|
|
|
return 0;
|
|
}
|
|
module_init(aic3x_modinit);
|
|
|
|
static void __exit aic3x_exit(void)
|
|
{
|
|
aic3x_i2c_exit();
|
|
}
|
|
module_exit(aic3x_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver");
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
MODULE_LICENSE("GPL");
|