mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 18:30:54 +07:00
de2cd1a552
devm_gpiod_get_from_of_node() is being retired in favor of [devm_]fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Note that now that we have a good non-devm API for getting GPIO from arbitrary firmware node, there is no reason to use devm API here as regulator core takes care of managing lifetime of "enable" GPIO and we were immediately detaching requested GPIO from devm anyway. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-3-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
522 lines
17 KiB
C
522 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// SLG51000 High PSRR, Multi-Output Regulators
|
|
// Copyright (C) 2019 Dialog Semiconductor
|
|
//
|
|
// Author: Eric Jeong <eric.jeong.opensource@diasemi.com>
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include "slg51000-regulator.h"
|
|
|
|
#define SLG51000_SCTL_EVT 7
|
|
#define SLG51000_MAX_EVT_REGISTER 8
|
|
#define SLG51000_LDOHP_LV_MIN 1200000
|
|
#define SLG51000_LDOHP_HV_MIN 2400000
|
|
|
|
enum slg51000_regulators {
|
|
SLG51000_REGULATOR_LDO1 = 0,
|
|
SLG51000_REGULATOR_LDO2,
|
|
SLG51000_REGULATOR_LDO3,
|
|
SLG51000_REGULATOR_LDO4,
|
|
SLG51000_REGULATOR_LDO5,
|
|
SLG51000_REGULATOR_LDO6,
|
|
SLG51000_REGULATOR_LDO7,
|
|
SLG51000_MAX_REGULATORS,
|
|
};
|
|
|
|
struct slg51000 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct regulator_desc *rdesc[SLG51000_MAX_REGULATORS];
|
|
struct regulator_dev *rdev[SLG51000_MAX_REGULATORS];
|
|
struct gpio_desc *cs_gpiod;
|
|
int chip_irq;
|
|
};
|
|
|
|
struct slg51000_evt_sta {
|
|
unsigned int ereg;
|
|
unsigned int sreg;
|
|
};
|
|
|
|
static const struct slg51000_evt_sta es_reg[SLG51000_MAX_EVT_REGISTER] = {
|
|
{SLG51000_LDO1_EVENT, SLG51000_LDO1_STATUS},
|
|
{SLG51000_LDO2_EVENT, SLG51000_LDO2_STATUS},
|
|
{SLG51000_LDO3_EVENT, SLG51000_LDO3_STATUS},
|
|
{SLG51000_LDO4_EVENT, SLG51000_LDO4_STATUS},
|
|
{SLG51000_LDO5_EVENT, SLG51000_LDO5_STATUS},
|
|
{SLG51000_LDO6_EVENT, SLG51000_LDO6_STATUS},
|
|
{SLG51000_LDO7_EVENT, SLG51000_LDO7_STATUS},
|
|
{SLG51000_SYSCTL_EVENT, SLG51000_SYSCTL_STATUS},
|
|
};
|
|
|
|
static const struct regmap_range slg51000_writeable_ranges[] = {
|
|
regmap_reg_range(SLG51000_SYSCTL_MATRIX_CONF_A,
|
|
SLG51000_SYSCTL_MATRIX_CONF_A),
|
|
regmap_reg_range(SLG51000_LDO1_VSEL, SLG51000_LDO1_VSEL),
|
|
regmap_reg_range(SLG51000_LDO1_MINV, SLG51000_LDO1_MAXV),
|
|
regmap_reg_range(SLG51000_LDO1_IRQ_MASK, SLG51000_LDO1_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO2_VSEL, SLG51000_LDO2_VSEL),
|
|
regmap_reg_range(SLG51000_LDO2_MINV, SLG51000_LDO2_MAXV),
|
|
regmap_reg_range(SLG51000_LDO2_IRQ_MASK, SLG51000_LDO2_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO3_VSEL, SLG51000_LDO3_VSEL),
|
|
regmap_reg_range(SLG51000_LDO3_MINV, SLG51000_LDO3_MAXV),
|
|
regmap_reg_range(SLG51000_LDO3_IRQ_MASK, SLG51000_LDO3_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO4_VSEL, SLG51000_LDO4_VSEL),
|
|
regmap_reg_range(SLG51000_LDO4_MINV, SLG51000_LDO4_MAXV),
|
|
regmap_reg_range(SLG51000_LDO4_IRQ_MASK, SLG51000_LDO4_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO5_VSEL, SLG51000_LDO5_VSEL),
|
|
regmap_reg_range(SLG51000_LDO5_MINV, SLG51000_LDO5_MAXV),
|
|
regmap_reg_range(SLG51000_LDO5_IRQ_MASK, SLG51000_LDO5_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO6_VSEL, SLG51000_LDO6_VSEL),
|
|
regmap_reg_range(SLG51000_LDO6_MINV, SLG51000_LDO6_MAXV),
|
|
regmap_reg_range(SLG51000_LDO6_IRQ_MASK, SLG51000_LDO6_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO7_VSEL, SLG51000_LDO7_VSEL),
|
|
regmap_reg_range(SLG51000_LDO7_MINV, SLG51000_LDO7_MAXV),
|
|
regmap_reg_range(SLG51000_LDO7_IRQ_MASK, SLG51000_LDO7_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_OTP_IRQ_MASK, SLG51000_OTP_IRQ_MASK),
|
|
};
|
|
|
|
static const struct regmap_range slg51000_readable_ranges[] = {
|
|
regmap_reg_range(SLG51000_SYSCTL_PATN_ID_B0,
|
|
SLG51000_SYSCTL_PATN_ID_B2),
|
|
regmap_reg_range(SLG51000_SYSCTL_SYS_CONF_A,
|
|
SLG51000_SYSCTL_SYS_CONF_A),
|
|
regmap_reg_range(SLG51000_SYSCTL_SYS_CONF_D,
|
|
SLG51000_SYSCTL_MATRIX_CONF_B),
|
|
regmap_reg_range(SLG51000_SYSCTL_REFGEN_CONF_C,
|
|
SLG51000_SYSCTL_UVLO_CONF_A),
|
|
regmap_reg_range(SLG51000_SYSCTL_FAULT_LOG1, SLG51000_SYSCTL_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_IO_GPIO1_CONF, SLG51000_IO_GPIO_STATUS),
|
|
regmap_reg_range(SLG51000_LUTARRAY_LUT_VAL_0,
|
|
SLG51000_LUTARRAY_LUT_VAL_11),
|
|
regmap_reg_range(SLG51000_MUXARRAY_INPUT_SEL_0,
|
|
SLG51000_MUXARRAY_INPUT_SEL_63),
|
|
regmap_reg_range(SLG51000_PWRSEQ_RESOURCE_EN_0,
|
|
SLG51000_PWRSEQ_INPUT_SENSE_CONF_B),
|
|
regmap_reg_range(SLG51000_LDO1_VSEL, SLG51000_LDO1_VSEL),
|
|
regmap_reg_range(SLG51000_LDO1_MINV, SLG51000_LDO1_MAXV),
|
|
regmap_reg_range(SLG51000_LDO1_MISC1, SLG51000_LDO1_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO1_EVENT, SLG51000_LDO1_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO2_VSEL, SLG51000_LDO2_VSEL),
|
|
regmap_reg_range(SLG51000_LDO2_MINV, SLG51000_LDO2_MAXV),
|
|
regmap_reg_range(SLG51000_LDO2_MISC1, SLG51000_LDO2_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO2_EVENT, SLG51000_LDO2_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO3_VSEL, SLG51000_LDO3_VSEL),
|
|
regmap_reg_range(SLG51000_LDO3_MINV, SLG51000_LDO3_MAXV),
|
|
regmap_reg_range(SLG51000_LDO3_CONF1, SLG51000_LDO3_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO3_EVENT, SLG51000_LDO3_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO4_VSEL, SLG51000_LDO4_VSEL),
|
|
regmap_reg_range(SLG51000_LDO4_MINV, SLG51000_LDO4_MAXV),
|
|
regmap_reg_range(SLG51000_LDO4_CONF1, SLG51000_LDO4_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO4_EVENT, SLG51000_LDO4_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO5_VSEL, SLG51000_LDO5_VSEL),
|
|
regmap_reg_range(SLG51000_LDO5_MINV, SLG51000_LDO5_MAXV),
|
|
regmap_reg_range(SLG51000_LDO5_TRIM2, SLG51000_LDO5_TRIM2),
|
|
regmap_reg_range(SLG51000_LDO5_CONF1, SLG51000_LDO5_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO5_EVENT, SLG51000_LDO5_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO6_VSEL, SLG51000_LDO6_VSEL),
|
|
regmap_reg_range(SLG51000_LDO6_MINV, SLG51000_LDO6_MAXV),
|
|
regmap_reg_range(SLG51000_LDO6_TRIM2, SLG51000_LDO6_TRIM2),
|
|
regmap_reg_range(SLG51000_LDO6_CONF1, SLG51000_LDO6_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO6_EVENT, SLG51000_LDO6_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_LDO7_VSEL, SLG51000_LDO7_VSEL),
|
|
regmap_reg_range(SLG51000_LDO7_MINV, SLG51000_LDO7_MAXV),
|
|
regmap_reg_range(SLG51000_LDO7_CONF1, SLG51000_LDO7_VSEL_ACTUAL),
|
|
regmap_reg_range(SLG51000_LDO7_EVENT, SLG51000_LDO7_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_OTP_EVENT, SLG51000_OTP_EVENT),
|
|
regmap_reg_range(SLG51000_OTP_IRQ_MASK, SLG51000_OTP_IRQ_MASK),
|
|
regmap_reg_range(SLG51000_OTP_LOCK_OTP_PROG, SLG51000_OTP_LOCK_CTRL),
|
|
regmap_reg_range(SLG51000_LOCK_GLOBAL_LOCK_CTRL1,
|
|
SLG51000_LOCK_GLOBAL_LOCK_CTRL1),
|
|
};
|
|
|
|
static const struct regmap_range slg51000_volatile_ranges[] = {
|
|
regmap_reg_range(SLG51000_SYSCTL_FAULT_LOG1, SLG51000_SYSCTL_STATUS),
|
|
regmap_reg_range(SLG51000_IO_GPIO_STATUS, SLG51000_IO_GPIO_STATUS),
|
|
regmap_reg_range(SLG51000_LDO1_EVENT, SLG51000_LDO1_STATUS),
|
|
regmap_reg_range(SLG51000_LDO2_EVENT, SLG51000_LDO2_STATUS),
|
|
regmap_reg_range(SLG51000_LDO3_EVENT, SLG51000_LDO3_STATUS),
|
|
regmap_reg_range(SLG51000_LDO4_EVENT, SLG51000_LDO4_STATUS),
|
|
regmap_reg_range(SLG51000_LDO5_EVENT, SLG51000_LDO5_STATUS),
|
|
regmap_reg_range(SLG51000_LDO6_EVENT, SLG51000_LDO6_STATUS),
|
|
regmap_reg_range(SLG51000_LDO7_EVENT, SLG51000_LDO7_STATUS),
|
|
regmap_reg_range(SLG51000_OTP_EVENT, SLG51000_OTP_EVENT),
|
|
};
|
|
|
|
static const struct regmap_access_table slg51000_writeable_table = {
|
|
.yes_ranges = slg51000_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(slg51000_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table slg51000_readable_table = {
|
|
.yes_ranges = slg51000_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(slg51000_readable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table slg51000_volatile_table = {
|
|
.yes_ranges = slg51000_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(slg51000_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_config slg51000_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.max_register = 0x8000,
|
|
.wr_table = &slg51000_writeable_table,
|
|
.rd_table = &slg51000_readable_table,
|
|
.volatile_table = &slg51000_volatile_table,
|
|
};
|
|
|
|
static const struct regulator_ops slg51000_regl_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops slg51000_switch_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static int slg51000_of_parse_cb(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *config)
|
|
{
|
|
struct gpio_desc *ena_gpiod;
|
|
|
|
ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0,
|
|
GPIOD_OUT_LOW |
|
|
GPIOD_FLAGS_BIT_NONEXCLUSIVE,
|
|
"gpio-en-ldo");
|
|
if (!IS_ERR(ena_gpiod))
|
|
config->ena_gpiod = ena_gpiod;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SLG51000_REGL_DESC(_id, _name, _s_name, _min, _step) \
|
|
[SLG51000_REGULATOR_##_id] = { \
|
|
.name = #_name, \
|
|
.supply_name = _s_name, \
|
|
.id = SLG51000_REGULATOR_##_id, \
|
|
.of_match = of_match_ptr(#_name), \
|
|
.of_parse_cb = slg51000_of_parse_cb, \
|
|
.ops = &slg51000_regl_ops, \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.n_voltages = 256, \
|
|
.min_uV = _min, \
|
|
.uV_step = _step, \
|
|
.linear_min_sel = 0, \
|
|
.vsel_mask = SLG51000_VSEL_MASK, \
|
|
.vsel_reg = SLG51000_##_id##_VSEL, \
|
|
.enable_reg = SLG51000_SYSCTL_MATRIX_CONF_A, \
|
|
.enable_mask = BIT(SLG51000_REGULATOR_##_id), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
static struct regulator_desc regls_desc[SLG51000_MAX_REGULATORS] = {
|
|
SLG51000_REGL_DESC(LDO1, ldo1, NULL, 2400000, 5000),
|
|
SLG51000_REGL_DESC(LDO2, ldo2, NULL, 2400000, 5000),
|
|
SLG51000_REGL_DESC(LDO3, ldo3, "vin3", 1200000, 10000),
|
|
SLG51000_REGL_DESC(LDO4, ldo4, "vin4", 1200000, 10000),
|
|
SLG51000_REGL_DESC(LDO5, ldo5, "vin5", 400000, 5000),
|
|
SLG51000_REGL_DESC(LDO6, ldo6, "vin6", 400000, 5000),
|
|
SLG51000_REGL_DESC(LDO7, ldo7, "vin7", 1200000, 10000),
|
|
};
|
|
|
|
static int slg51000_regulator_init(struct slg51000 *chip)
|
|
{
|
|
struct regulator_config config = { };
|
|
struct regulator_desc *rdesc;
|
|
unsigned int reg, val;
|
|
u8 vsel_range[2];
|
|
int id, ret = 0;
|
|
const unsigned int min_regs[SLG51000_MAX_REGULATORS] = {
|
|
SLG51000_LDO1_MINV, SLG51000_LDO2_MINV, SLG51000_LDO3_MINV,
|
|
SLG51000_LDO4_MINV, SLG51000_LDO5_MINV, SLG51000_LDO6_MINV,
|
|
SLG51000_LDO7_MINV,
|
|
};
|
|
|
|
for (id = 0; id < SLG51000_MAX_REGULATORS; id++) {
|
|
chip->rdesc[id] = ®ls_desc[id];
|
|
rdesc = chip->rdesc[id];
|
|
config.regmap = chip->regmap;
|
|
config.dev = chip->dev;
|
|
config.driver_data = chip;
|
|
|
|
ret = regmap_bulk_read(chip->regmap, min_regs[id],
|
|
vsel_range, 2);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read the MIN register\n");
|
|
return ret;
|
|
}
|
|
|
|
switch (id) {
|
|
case SLG51000_REGULATOR_LDO1:
|
|
case SLG51000_REGULATOR_LDO2:
|
|
if (id == SLG51000_REGULATOR_LDO1)
|
|
reg = SLG51000_LDO1_MISC1;
|
|
else
|
|
reg = SLG51000_LDO2_MISC1;
|
|
|
|
ret = regmap_read(chip->regmap, reg, &val);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read voltage range of ldo%d\n",
|
|
id + 1);
|
|
return ret;
|
|
}
|
|
|
|
rdesc->linear_min_sel = vsel_range[0];
|
|
rdesc->n_voltages = vsel_range[1] + 1;
|
|
if (val & SLG51000_SEL_VRANGE_MASK)
|
|
rdesc->min_uV = SLG51000_LDOHP_HV_MIN
|
|
+ (vsel_range[0]
|
|
* rdesc->uV_step);
|
|
else
|
|
rdesc->min_uV = SLG51000_LDOHP_LV_MIN
|
|
+ (vsel_range[0]
|
|
* rdesc->uV_step);
|
|
break;
|
|
|
|
case SLG51000_REGULATOR_LDO5:
|
|
case SLG51000_REGULATOR_LDO6:
|
|
if (id == SLG51000_REGULATOR_LDO5)
|
|
reg = SLG51000_LDO5_TRIM2;
|
|
else
|
|
reg = SLG51000_LDO6_TRIM2;
|
|
|
|
ret = regmap_read(chip->regmap, reg, &val);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read LDO mode register\n");
|
|
return ret;
|
|
}
|
|
|
|
if (val & SLG51000_SEL_BYP_MODE_MASK) {
|
|
rdesc->ops = &slg51000_switch_ops;
|
|
rdesc->n_voltages = 0;
|
|
rdesc->min_uV = 0;
|
|
rdesc->uV_step = 0;
|
|
rdesc->linear_min_sel = 0;
|
|
break;
|
|
}
|
|
/* Fall through - to the check below.*/
|
|
|
|
default:
|
|
rdesc->linear_min_sel = vsel_range[0];
|
|
rdesc->n_voltages = vsel_range[1] + 1;
|
|
rdesc->min_uV = rdesc->min_uV
|
|
+ (vsel_range[0] * rdesc->uV_step);
|
|
break;
|
|
}
|
|
|
|
chip->rdev[id] = devm_regulator_register(chip->dev, rdesc,
|
|
&config);
|
|
if (IS_ERR(chip->rdev[id])) {
|
|
ret = PTR_ERR(chip->rdev[id]);
|
|
dev_err(chip->dev,
|
|
"Failed to register regulator(%s):%d\n",
|
|
chip->rdesc[id]->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t slg51000_irq_handler(int irq, void *data)
|
|
{
|
|
struct slg51000 *chip = data;
|
|
struct regmap *regmap = chip->regmap;
|
|
enum { R0 = 0, R1, R2, REG_MAX };
|
|
u8 evt[SLG51000_MAX_EVT_REGISTER][REG_MAX];
|
|
int ret, i, handled = IRQ_NONE;
|
|
unsigned int evt_otp, mask_otp;
|
|
|
|
/* Read event[R0], status[R1] and mask[R2] register */
|
|
for (i = 0; i < SLG51000_MAX_EVT_REGISTER; i++) {
|
|
ret = regmap_bulk_read(regmap, es_reg[i].ereg, evt[i], REG_MAX);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read event registers(%d)\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
}
|
|
|
|
ret = regmap_read(regmap, SLG51000_OTP_EVENT, &evt_otp);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read otp event registers(%d)\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ret = regmap_read(regmap, SLG51000_OTP_IRQ_MASK, &mask_otp);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to read otp mask register(%d)\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if ((evt_otp & SLG51000_EVT_CRC_MASK) &&
|
|
!(mask_otp & SLG51000_IRQ_CRC_MASK)) {
|
|
dev_info(chip->dev,
|
|
"OTP has been read or OTP crc is not zero\n");
|
|
handled = IRQ_HANDLED;
|
|
}
|
|
|
|
for (i = 0; i < SLG51000_MAX_REGULATORS; i++) {
|
|
if (!(evt[i][R2] & SLG51000_IRQ_ILIM_FLAG_MASK) &&
|
|
(evt[i][R0] & SLG51000_EVT_ILIM_FLAG_MASK)) {
|
|
regulator_lock(chip->rdev[i]);
|
|
regulator_notifier_call_chain(chip->rdev[i],
|
|
REGULATOR_EVENT_OVER_CURRENT, NULL);
|
|
regulator_unlock(chip->rdev[i]);
|
|
|
|
if (evt[i][R1] & SLG51000_STA_ILIM_FLAG_MASK)
|
|
dev_warn(chip->dev,
|
|
"Over-current limit(ldo%d)\n", i + 1);
|
|
handled = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
if (!(evt[SLG51000_SCTL_EVT][R2] & SLG51000_IRQ_HIGH_TEMP_WARN_MASK) &&
|
|
(evt[SLG51000_SCTL_EVT][R0] & SLG51000_EVT_HIGH_TEMP_WARN_MASK)) {
|
|
for (i = 0; i < SLG51000_MAX_REGULATORS; i++) {
|
|
if (!(evt[i][R1] & SLG51000_STA_ILIM_FLAG_MASK) &&
|
|
(evt[i][R1] & SLG51000_STA_VOUT_OK_FLAG_MASK)) {
|
|
regulator_lock(chip->rdev[i]);
|
|
regulator_notifier_call_chain(chip->rdev[i],
|
|
REGULATOR_EVENT_OVER_TEMP, NULL);
|
|
regulator_unlock(chip->rdev[i]);
|
|
}
|
|
}
|
|
handled = IRQ_HANDLED;
|
|
if (evt[SLG51000_SCTL_EVT][R1] &
|
|
SLG51000_STA_HIGH_TEMP_WARN_MASK)
|
|
dev_warn(chip->dev, "High temperature warning!\n");
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void slg51000_clear_fault_log(struct slg51000 *chip)
|
|
{
|
|
unsigned int val = 0;
|
|
int ret = 0;
|
|
|
|
ret = regmap_read(chip->regmap, SLG51000_SYSCTL_FAULT_LOG1, &val);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to read Fault log register\n");
|
|
return;
|
|
}
|
|
|
|
if (val & SLG51000_FLT_OVER_TEMP_MASK)
|
|
dev_dbg(chip->dev, "Fault log: FLT_OVER_TEMP\n");
|
|
if (val & SLG51000_FLT_POWER_SEQ_CRASH_REQ_MASK)
|
|
dev_dbg(chip->dev, "Fault log: FLT_POWER_SEQ_CRASH_REQ\n");
|
|
if (val & SLG51000_FLT_RST_MASK)
|
|
dev_dbg(chip->dev, "Fault log: FLT_RST\n");
|
|
if (val & SLG51000_FLT_POR_MASK)
|
|
dev_dbg(chip->dev, "Fault log: FLT_POR\n");
|
|
}
|
|
|
|
static int slg51000_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct slg51000 *chip;
|
|
struct gpio_desc *cs_gpiod;
|
|
int error, ret;
|
|
|
|
chip = devm_kzalloc(dev, sizeof(struct slg51000), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
cs_gpiod = devm_gpiod_get_optional(dev, "dlg,cs",
|
|
GPIOD_OUT_HIGH |
|
|
GPIOD_FLAGS_BIT_NONEXCLUSIVE);
|
|
if (IS_ERR(cs_gpiod))
|
|
return PTR_ERR(cs_gpiod);
|
|
|
|
if (cs_gpiod) {
|
|
dev_info(dev, "Found chip selector property\n");
|
|
chip->cs_gpiod = cs_gpiod;
|
|
}
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
chip->chip_irq = client->irq;
|
|
chip->dev = dev;
|
|
chip->regmap = devm_regmap_init_i2c(client, &slg51000_regmap_config);
|
|
if (IS_ERR(chip->regmap)) {
|
|
error = PTR_ERR(chip->regmap);
|
|
dev_err(dev, "Failed to allocate register map: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
ret = slg51000_regulator_init(chip);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to init regulator(%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
slg51000_clear_fault_log(chip);
|
|
|
|
if (chip->chip_irq) {
|
|
ret = devm_request_threaded_irq(dev, chip->chip_irq, NULL,
|
|
slg51000_irq_handler,
|
|
(IRQF_TRIGGER_HIGH |
|
|
IRQF_ONESHOT),
|
|
"slg51000-irq", chip);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request IRQ: %d\n",
|
|
chip->chip_irq);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_info(dev, "No IRQ configured\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id slg51000_i2c_id[] = {
|
|
{"slg51000", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, slg51000_i2c_id);
|
|
|
|
static struct i2c_driver slg51000_regulator_driver = {
|
|
.driver = {
|
|
.name = "slg51000-regulator",
|
|
},
|
|
.probe = slg51000_i2c_probe,
|
|
.id_table = slg51000_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(slg51000_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Eric Jeong <eric.jeong.opensource@diasemi.com>");
|
|
MODULE_DESCRIPTION("SLG51000 regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
|