mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-14 02:06:54 +07:00
84ba4a5899
Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
370 lines
8.7 KiB
Plaintext
370 lines
8.7 KiB
Plaintext
/*
|
|
* MPC8541 CDS Device Tree Source
|
|
*
|
|
* Copyright 2006, 2008 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8541CDS";
|
|
compatible = "MPC8541CDS", "MPC85xxCDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8541@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <0>; // 33 MHz, from uboot
|
|
bus-frequency = <0>; // 166 MHz
|
|
clock-frequency = <0>; // 825 MHz, from uboot
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>; // 128M at 0x0
|
|
};
|
|
|
|
soc8541@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x100000>;
|
|
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
|
|
bus-frequency = <0>;
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,8541-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <18 2>;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,8541-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x40000>; // L2, 256K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8541-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8541-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8541-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8541-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <29 2 30 2 34 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1>;
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1>;
|
|
reg = <0x1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <35 2 36 2 40 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy1>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>; // reg base, size
|
|
clock-frequency = <0>; // should we fill in in uboot?
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>; // reg base, size
|
|
clock-frequency = <0>; // should we fill in in uboot?
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x7e>;
|
|
fsl,descriptor-types-mask = <0x01010ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
cpm@919c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
|
|
reg = <0x919c0 0x30>;
|
|
ranges;
|
|
|
|
muram@80000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x80000 0x10000>;
|
|
|
|
data@0 {
|
|
compatible = "fsl,cpm-muram-data";
|
|
reg = <0x0 0x2000 0x9000 0x1000>;
|
|
};
|
|
};
|
|
|
|
brg@919f0 {
|
|
compatible = "fsl,mpc8541-brg",
|
|
"fsl,cpm2-brg",
|
|
"fsl,cpm-brg";
|
|
reg = <0x919f0 0x10 0x915f0 0x10>;
|
|
};
|
|
|
|
cpmpic: pic@90c00 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <46 2>;
|
|
interrupt-parent = <&mpic>;
|
|
reg = <0x90c00 0x80>;
|
|
compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008000 {
|
|
cell-index = <0>;
|
|
interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x10 */
|
|
0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
|
|
|
|
/* IDSEL 0x11 */
|
|
0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
|
|
|
|
/* IDSEL 0x12 (Slot 1) */
|
|
0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
|
|
|
|
/* IDSEL 0x13 (Slot 2) */
|
|
0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
|
|
0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
|
|
0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
|
|
0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
|
|
|
|
/* IDSEL 0x14 (Slot 3) */
|
|
0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
|
|
0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
|
|
0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
|
|
0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
|
|
|
|
/* IDSEL 0x15 (Slot 4) */
|
|
0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
|
|
0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
|
|
0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
|
|
0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
|
|
|
|
/* Bus 1 (Tundra Bridge) */
|
|
/* IDSEL 0x12 (ISA bridge) */
|
|
0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <24 2>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
|
|
0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008000 0x1000>;
|
|
compatible = "fsl,mpc8540-pci";
|
|
device_type = "pci";
|
|
|
|
i8259@19000 {
|
|
interrupt-controller;
|
|
device_type = "interrupt-controller";
|
|
reg = <0x19000 0x0 0x0 0x0 0x1>;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "chrp,iic";
|
|
interrupts = <1>;
|
|
interrupt-parent = <&pci0>;
|
|
};
|
|
};
|
|
|
|
pci1: pci@e0009000 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x15 */
|
|
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
|
|
0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
|
|
0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
|
|
0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <25 2>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0009000 0x1000>;
|
|
compatible = "fsl,mpc8540-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|