mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
38c23685b2
The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do power
management in a platform independent way. This has been through many
review cycles, and it relies on a rather interesting way of using the
mailbox subsystem, but in the end I agreed that Sudeep's version was
the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up
a little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pmsx
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do
power management in a platform independent way.
This has been through many review cycles, and it relies on a rather
interesting way of using the mailbox subsystem, but in the end I
agreed that Sudeep's version was the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up a
little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
reset: uniphier: add ethernet reset control support for PXs3
reset: stm32mp1: Enable stm32mp1 reset driver
dt-bindings: reset: add STM32MP1 resets
reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
reset: modify the way reset lookup works for board files
reset: add support for non-DT systems
clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
firmware: arm_scmi: prevent accessing rate_discrete uninitialized
hwmon: (scmi) return -EINVAL when sensor information is unavailable
amlogic: meson-gx-socinfo: Update soc ids
soc/tegra: pmc: Use the new reset APIs to manage reset controllers
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
cpufreq: scmi: add thermal dependency
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
...
314 lines
8.9 KiB
Plaintext
314 lines
8.9 KiB
Plaintext
#
|
|
# ARM CPU Frequency scaling drivers
|
|
#
|
|
|
|
config ACPI_CPPC_CPUFREQ
|
|
tristate "CPUFreq driver based on the ACPI CPPC spec"
|
|
depends on ACPI_PROCESSOR
|
|
select ACPI_CPPC_LIB
|
|
help
|
|
This adds a CPUFreq driver which uses CPPC methods
|
|
as described in the ACPIv5.1 spec. CPPC stands for
|
|
Collaborative Processor Performance Controls. It
|
|
is based on an abstract continuous scale of CPU
|
|
performance values which allows the remote power
|
|
processor to flexibly optimize for power and
|
|
performance. CPPC relies on power management firmware
|
|
support for its operation.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_ARMADA_37XX_CPUFREQ
|
|
tristate "Armada 37xx CPUFreq support"
|
|
depends on ARCH_MVEBU
|
|
help
|
|
This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
|
|
The Armada 37xx PMU supports 4 frequency and VDD levels.
|
|
|
|
# big LITTLE core layer and glue drivers
|
|
config ARM_BIG_LITTLE_CPUFREQ
|
|
tristate "Generic ARM big LITTLE CPUfreq driver"
|
|
depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
|
|
# if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
|
|
depends on !CPU_THERMAL || THERMAL
|
|
select PM_OPP
|
|
help
|
|
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
|
|
|
|
config ARM_DT_BL_CPUFREQ
|
|
tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
|
|
depends on ARM_BIG_LITTLE_CPUFREQ && OF
|
|
help
|
|
This enables probing via DT for Generic CPUfreq driver for ARM
|
|
big.LITTLE platform. This gets frequency tables from DT.
|
|
|
|
config ARM_SCPI_CPUFREQ
|
|
tristate "SCPI based CPUfreq driver"
|
|
depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
|
|
depends on !CPU_THERMAL || THERMAL
|
|
help
|
|
This adds the CPUfreq driver support for ARM platforms using SCPI
|
|
protocol for CPU power management.
|
|
|
|
This driver uses SCPI Message Protocol driver to interact with the
|
|
firmware providing the CPU DVFS functionality.
|
|
|
|
config ARM_VEXPRESS_SPC_CPUFREQ
|
|
tristate "Versatile Express SPC based CPUfreq driver"
|
|
depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
|
|
help
|
|
This add the CPUfreq driver support for Versatile Express
|
|
big.LITTLE platforms using SPC for power management.
|
|
|
|
config ARM_BRCMSTB_AVS_CPUFREQ
|
|
tristate "Broadcom STB AVS CPUfreq driver"
|
|
depends on ARCH_BRCMSTB || COMPILE_TEST
|
|
default y
|
|
help
|
|
Some Broadcom STB SoCs use a co-processor running proprietary firmware
|
|
("AVS") to handle voltage and frequency scaling. This driver provides
|
|
a standard CPUfreq interface to to the firmware.
|
|
|
|
Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
|
|
|
|
config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
|
|
bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
|
|
depends on ARM_BRCMSTB_AVS_CPUFREQ
|
|
help
|
|
Enabling this option turns on debug support via sysfs under
|
|
/sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
|
|
write some AVS mailbox registers through sysfs entries.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_EXYNOS5440_CPUFREQ
|
|
tristate "SAMSUNG EXYNOS5440"
|
|
depends on SOC_EXYNOS5440
|
|
depends on HAVE_CLK && OF
|
|
select PM_OPP
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung EXYNOS5440
|
|
SoC. The nature of exynos5440 clock controller is
|
|
different than previous exynos controllers so not using
|
|
the common exynos framework.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_HIGHBANK_CPUFREQ
|
|
tristate "Calxeda Highbank-based"
|
|
depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
|
|
default m
|
|
help
|
|
This adds the CPUFreq driver for Calxeda Highbank SoC
|
|
based boards.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_IMX6Q_CPUFREQ
|
|
tristate "Freescale i.MX6 cpufreq support"
|
|
depends on ARCH_MXC
|
|
depends on REGULATOR_ANATOP
|
|
select PM_OPP
|
|
help
|
|
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_KIRKWOOD_CPUFREQ
|
|
def_bool MACH_KIRKWOOD
|
|
help
|
|
This adds the CPUFreq driver for Marvell Kirkwood
|
|
SoCs.
|
|
|
|
config ARM_MEDIATEK_CPUFREQ
|
|
tristate "CPU Frequency scaling support for MediaTek SoCs"
|
|
depends on ARCH_MEDIATEK && REGULATOR
|
|
depends on !CPU_THERMAL || THERMAL
|
|
select PM_OPP
|
|
help
|
|
This adds the CPUFreq driver support for MediaTek SoCs.
|
|
|
|
config ARM_OMAP2PLUS_CPUFREQ
|
|
bool "TI OMAP2+"
|
|
depends on ARCH_OMAP2PLUS
|
|
default ARCH_OMAP2PLUS
|
|
|
|
config ARM_S3C_CPUFREQ
|
|
bool
|
|
help
|
|
Internal configuration node for common cpufreq on Samsung SoC
|
|
|
|
config ARM_S3C24XX_CPUFREQ
|
|
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
|
|
depends on ARCH_S3C24XX
|
|
select ARM_S3C_CPUFREQ
|
|
help
|
|
This enables the CPUfreq driver for the Samsung S3C24XX family
|
|
of CPUs.
|
|
|
|
For details, take a look at <file:Documentation/cpu-freq>.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C24XX_CPUFREQ_DEBUG
|
|
bool "Debug CPUfreq Samsung driver core"
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
|
|
|
|
config ARM_S3C24XX_CPUFREQ_IODEBUG
|
|
bool "Debug CPUfreq Samsung driver IO timing"
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
|
|
|
|
config ARM_S3C24XX_CPUFREQ_DEBUGFS
|
|
bool "Export debugfs for CPUFreq"
|
|
depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
|
|
help
|
|
Export status information via debugfs.
|
|
|
|
config ARM_S3C2410_CPUFREQ
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
|
|
select S3C2410_CPUFREQ_UTILS
|
|
help
|
|
CPU Frequency scaling support for S3C2410
|
|
|
|
config ARM_S3C2412_CPUFREQ
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
|
|
default y
|
|
select S3C2412_IOTIMING
|
|
help
|
|
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
|
|
|
|
config ARM_S3C2416_CPUFREQ
|
|
bool "S3C2416 CPU Frequency scaling support"
|
|
depends on CPU_S3C2416
|
|
help
|
|
This adds the CPUFreq driver for the Samsung S3C2416 and
|
|
S3C2450 SoC. The S3C2416 supports changing the rate of the
|
|
armdiv clock source and also entering a so called dynamic
|
|
voltage scaling mode in which it is possible to reduce the
|
|
core voltage of the CPU.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C2416_CPUFREQ_VCORESCALE
|
|
bool "Allow voltage scaling for S3C2416 arm core"
|
|
depends on ARM_S3C2416_CPUFREQ && REGULATOR
|
|
help
|
|
Enable CPU voltage scaling when entering the dvs mode.
|
|
It uses information gathered through existing hardware and
|
|
tests but not documented in any datasheet.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C2440_CPUFREQ
|
|
bool "S3C2440/S3C2442 CPU Frequency scaling support"
|
|
depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
|
|
select S3C2410_CPUFREQ_UTILS
|
|
default y
|
|
help
|
|
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
|
|
|
|
config ARM_S3C64XX_CPUFREQ
|
|
bool "Samsung S3C64XX"
|
|
depends on CPU_S3C6410
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung S3C6410 SoC.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S5PV210_CPUFREQ
|
|
bool "Samsung S5PV210 and S5PC110"
|
|
depends on CPU_S5PV210
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung S5PV210 and
|
|
S5PC110 SoCs.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_SA1100_CPUFREQ
|
|
bool
|
|
|
|
config ARM_SA1110_CPUFREQ
|
|
bool
|
|
|
|
config ARM_SCMI_CPUFREQ
|
|
tristate "SCMI based CPUfreq driver"
|
|
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
|
|
depends on !CPU_THERMAL || THERMAL
|
|
select PM_OPP
|
|
help
|
|
This adds the CPUfreq driver support for ARM platforms using SCMI
|
|
protocol for CPU power management.
|
|
|
|
This driver uses SCMI Message Protocol driver to interact with the
|
|
firmware providing the CPU DVFS functionality.
|
|
|
|
config ARM_SPEAR_CPUFREQ
|
|
bool "SPEAr CPUFreq support"
|
|
depends on PLAT_SPEAR
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for SPEAr SOCs.
|
|
|
|
config ARM_STI_CPUFREQ
|
|
tristate "STi CPUFreq support"
|
|
depends on SOC_STIH407
|
|
help
|
|
This driver uses the generic OPP framework to match the running
|
|
platform with a predefined set of suitable values. If not provided
|
|
we will fall-back so safe-values contained in Device Tree. Enable
|
|
this config option if you wish to add CPUFreq support for STi based
|
|
SoCs.
|
|
|
|
config ARM_TANGO_CPUFREQ
|
|
bool
|
|
depends on CPUFREQ_DT && ARCH_TANGO
|
|
default y
|
|
|
|
config ARM_TEGRA20_CPUFREQ
|
|
bool "Tegra20 CPUFreq support"
|
|
depends on ARCH_TEGRA
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for Tegra20 SOCs.
|
|
|
|
config ARM_TEGRA124_CPUFREQ
|
|
tristate "Tegra124 CPUFreq support"
|
|
depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for Tegra124 SOCs.
|
|
|
|
config ARM_TEGRA186_CPUFREQ
|
|
tristate "Tegra186 CPUFreq support"
|
|
depends on ARCH_TEGRA && TEGRA_BPMP
|
|
help
|
|
This adds the CPUFreq driver support for Tegra186 SOCs.
|
|
|
|
config ARM_TI_CPUFREQ
|
|
bool "Texas Instruments CPUFreq support"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
This driver enables valid OPPs on the running platform based on
|
|
values contained within the SoC in use. Enable this in order to
|
|
use the cpufreq-dt driver on all Texas Instruments platforms that
|
|
provide dt based operating-points-v2 tables with opp-supported-hw
|
|
data provided. Required for cpufreq support on AM335x, AM437x,
|
|
DRA7x, and AM57x platforms.
|
|
|
|
config ARM_PXA2xx_CPUFREQ
|
|
tristate "Intel PXA2xx CPUfreq driver"
|
|
depends on PXA27x || PXA25x
|
|
help
|
|
This add the CPUFreq driver support for Intel PXA2xx SOCs.
|
|
|
|
If in doubt, say N.
|