linux_dsm_epyc7002/Documentation/devicetree/bindings/soc/fsl/guts.txt
yangbo lu a8c759c78f dt: bindings: move guts devicetree doc out of powerpc directory
Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/
since it's used by not only PowerPC but also ARM. And add a specification
for 'little-endian' property.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29 09:17:20 +01:00

45 lines
1.3 KiB
Plaintext

* Global Utilities Block
The global utilities block controls power management, I/O device
enabling, power-on-reset configuration monitoring, general-purpose
I/O signal configuration, alternate function selection for multiplexed
signals, and clock control.
Required properties:
- compatible : Should define the compatible device type for
global-utilities.
Possible compatibles:
"fsl,qoriq-device-config-1.0"
"fsl,qoriq-device-config-2.0"
"fsl,<chip>-device-config"
"fsl,<chip>-guts"
- reg : Offset and length of the register set for the device.
Recommended properties:
- fsl,has-rstcr : Indicates that the global utilities register set
contains a functioning "reset control register" (i.e. the board
is wired to reset upon setting the HRESET_REQ bit in this register).
- fsl,liodn-bits : Indicates the number of defined bits in the LIODN
registers, for those SOCs that have a PAMU device.
- little-endian : Indicates that the global utilities block is little
endian. The default is big endian.
Examples:
global-utilities@e0000 { /* global utilities block */
compatible = "fsl,mpc8548-guts";
reg = <e0000 1000>;
fsl,has-rstcr;
};
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};