linux_dsm_epyc7002/drivers/net/wireless/mwifiex/uap_txrx.c
Avinash Patil 838e4f4492 mwifiex: improve uAP RX handling
1. Separate file for uAP RX handling.
2. If received packet is broadcast/multicast, send it to kernel
   as well as requeue it back to uAP TX queue.
3. If received packet is for associated STA (intra-BSS), requeue
   it back to uAP TX queue.
4. In all other cases (packets for AP or inter-BSS packets),
   pass packet to kernel to handle it accordingly.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06 15:12:54 -04:00

206 lines
6.3 KiB
C

/*
* Marvell Wireless LAN device driver: AP TX and RX data handling
*
* Copyright (C) 2012, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*/
#include "decl.h"
#include "ioctl.h"
#include "main.h"
#include "wmm.h"
static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
struct sk_buff *skb)
{
struct mwifiex_adapter *adapter = priv->adapter;
struct uap_rxpd *uap_rx_pd;
struct rx_packet_hdr *rx_pkt_hdr;
struct sk_buff *new_skb;
struct mwifiex_txinfo *tx_info;
int hdr_chop;
struct timeval tv;
u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
uap_rx_pd = (struct uap_rxpd *)(skb->data);
rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
if ((atomic_read(&adapter->pending_bridged_pkts) >=
MWIFIEX_BRIDGED_PKTS_THRESHOLD)) {
dev_err(priv->adapter->dev,
"Tx: Bridge packet limit reached. Drop packet!\n");
kfree_skb(skb);
return;
}
if (!memcmp(&rx_pkt_hdr->rfc1042_hdr,
rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)))
/* Chop off the rxpd + the excess memory from
* 802.2/llc/snap header that was removed.
*/
hdr_chop = (u8 *)eth_hdr - (u8 *)uap_rx_pd;
else
/* Chop off the rxpd */
hdr_chop = (u8 *)&rx_pkt_hdr->eth803_hdr - (u8 *)uap_rx_pd;
/* Chop off the leading header bytes so the it points
* to the start of either the reconstructed EthII frame
* or the 802.2/llc/snap frame.
*/
skb_pull(skb, hdr_chop);
if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) {
dev_dbg(priv->adapter->dev,
"data: Tx: insufficient skb headroom %d\n",
skb_headroom(skb));
/* Insufficient skb headroom - allocate a new skb */
new_skb =
skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
if (unlikely(!new_skb)) {
dev_err(priv->adapter->dev,
"Tx: cannot allocate new_skb\n");
kfree_skb(skb);
priv->stats.tx_dropped++;
return;
}
kfree_skb(skb);
skb = new_skb;
dev_dbg(priv->adapter->dev, "info: new skb headroom %d\n",
skb_headroom(skb));
}
tx_info = MWIFIEX_SKB_TXCB(skb);
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;
do_gettimeofday(&tv);
skb->tstamp = timeval_to_ktime(tv);
mwifiex_wmm_add_buf_txqueue(priv, skb);
atomic_inc(&adapter->tx_pending);
atomic_inc(&adapter->pending_bridged_pkts);
if ((atomic_read(&adapter->tx_pending) >= MAX_TX_PENDING)) {
mwifiex_set_trans_start(priv->netdev);
mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter);
}
return;
}
/*
* This function contains logic for AP packet forwarding.
*
* If a packet is multicast/broadcast, it is sent to kernel/upper layer
* as well as queued back to AP TX queue so that it can be sent to other
* associated stations.
* If a packet is unicast and RA is present in associated station list,
* it is again requeued into AP TX queue.
* If a packet is unicast and RA is not in associated station list,
* packet is forwarded to kernel to handle routing logic.
*/
int mwifiex_handle_uap_rx_forward(struct mwifiex_private *priv,
struct sk_buff *skb)
{
struct mwifiex_adapter *adapter = priv->adapter;
struct uap_rxpd *uap_rx_pd;
struct rx_packet_hdr *rx_pkt_hdr;
u8 ra[ETH_ALEN];
struct sk_buff *skb_uap;
uap_rx_pd = (struct uap_rxpd *)(skb->data);
rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
/* don't do packet forwarding in disconnected state */
if (!priv->media_connected) {
dev_err(adapter->dev, "drop packet in disconnected state.\n");
dev_kfree_skb_any(skb);
return 0;
}
memcpy(ra, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN);
if (is_multicast_ether_addr(ra)) {
skb_uap = skb_copy(skb, GFP_ATOMIC);
mwifiex_uap_queue_bridged_pkt(priv, skb_uap);
} else {
if (mwifiex_get_sta_entry(priv, ra)) {
/* Requeue Intra-BSS packet */
mwifiex_uap_queue_bridged_pkt(priv, skb);
return 0;
}
}
/* Forward unicat/Inter-BSS packets to kernel. */
return mwifiex_process_rx_packet(adapter, skb);
}
/*
* This function processes the packet received on AP interface.
*
* The function looks into the RxPD and performs sanity tests on the
* received buffer to ensure its a valid packet before processing it
* further. If the packet is determined to be aggregated, it is
* de-aggregated accordingly. Then skb is passed to AP packet forwarding logic.
*
* The completion callback is called after processing is complete.
*/
int mwifiex_process_uap_rx_packet(struct mwifiex_adapter *adapter,
struct sk_buff *skb)
{
int ret;
struct uap_rxpd *uap_rx_pd;
struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
struct rx_packet_hdr *rx_pkt_hdr;
u16 rx_pkt_type;
struct mwifiex_private *priv =
mwifiex_get_priv_by_id(adapter, rx_info->bss_num,
rx_info->bss_type);
if (!priv)
return -1;
uap_rx_pd = (struct uap_rxpd *)(skb->data);
rx_pkt_type = le16_to_cpu(uap_rx_pd->rx_pkt_type);
rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
if ((le16_to_cpu(uap_rx_pd->rx_pkt_offset) +
le16_to_cpu(uap_rx_pd->rx_pkt_length)) > (u16) skb->len) {
dev_err(adapter->dev,
"wrong rx packet: len=%d, offset=%d, length=%d\n",
skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset),
le16_to_cpu(uap_rx_pd->rx_pkt_length));
priv->stats.rx_dropped++;
if (adapter->if_ops.data_complete)
adapter->if_ops.data_complete(adapter, skb);
else
dev_kfree_skb_any(skb);
return 0;
}
ret = mwifiex_handle_uap_rx_forward(priv, skb);
if (ret) {
priv->stats.rx_dropped++;
if (adapter->if_ops.data_complete)
adapter->if_ops.data_complete(adapter, skb);
else
dev_kfree_skb_any(skb);
}
return ret;
}