mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 13:46:50 +07:00
54397d8534
Now that mbus has been added to the device tree, it's possible to move the PCIe nodes out of the ocp node, placing it directly below the mbus. This is a more accurate representation of the hardware. Moving the PCIe nodes, we now need to introduce an extra cell to encode the window target ID and attribute. Since this depends on the PCIe port, we split the ranges translation entries, to correspond to each MBus window. In addition, we encode the PCIe memory and I/O apertures in the MBus node, according to the MBus DT binding specification. The choice made is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for I/O space. These apertures can be changed in each per-board DT file. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
108 lines
2.5 KiB
Plaintext
108 lines
2.5 KiB
Plaintext
/ {
|
|
mbus {
|
|
pcie-controller {
|
|
compatible = "marvell,kirkwood-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
|
|
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
|
|
|
|
pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &intc 9>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gate_clk 2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pinctrl@10000 {
|
|
compatible = "marvell,88f6281-pinctrl";
|
|
reg = <0x10000 0x20>;
|
|
|
|
pmx_nand: pmx-nand {
|
|
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
|
|
"mpp4", "mpp5", "mpp18",
|
|
"mpp19";
|
|
marvell,function = "nand";
|
|
};
|
|
pmx_sata0: pmx-sata0 {
|
|
marvell,pins = "mpp5", "mpp21", "mpp23";
|
|
marvell,function = "sata0";
|
|
};
|
|
pmx_sata1: pmx-sata1 {
|
|
marvell,pins = "mpp4", "mpp20", "mpp22";
|
|
marvell,function = "sata1";
|
|
};
|
|
pmx_spi: pmx-spi {
|
|
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
|
|
marvell,function = "spi";
|
|
};
|
|
pmx_twsi0: pmx-twsi0 {
|
|
marvell,pins = "mpp8", "mpp9";
|
|
marvell,function = "twsi0";
|
|
};
|
|
pmx_uart0: pmx-uart0 {
|
|
marvell,pins = "mpp10", "mpp11";
|
|
marvell,function = "uart0";
|
|
};
|
|
pmx_uart1: pmx-uart1 {
|
|
marvell,pins = "mpp13", "mpp14";
|
|
marvell,function = "uart1";
|
|
};
|
|
pmx_sdio: pmx-sdio {
|
|
marvell,pins = "mpp12", "mpp13", "mpp14",
|
|
"mpp15", "mpp16", "mpp17";
|
|
marvell,function = "sdio";
|
|
};
|
|
};
|
|
|
|
rtc@10300 {
|
|
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
|
|
reg = <0x10300 0x20>;
|
|
interrupts = <53>;
|
|
clocks = <&gate_clk 7>;
|
|
};
|
|
|
|
sata@80000 {
|
|
compatible = "marvell,orion-sata";
|
|
reg = <0x80000 0x5000>;
|
|
interrupts = <21>;
|
|
clocks = <&gate_clk 14>, <&gate_clk 15>;
|
|
clock-names = "0", "1";
|
|
status = "disabled";
|
|
};
|
|
|
|
mvsdio@90000 {
|
|
compatible = "marvell,orion-sdio";
|
|
reg = <0x90000 0x200>;
|
|
interrupts = <28>;
|
|
clocks = <&gate_clk 4>;
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|