linux_dsm_epyc7002/drivers/pinctrl/freescale/pinctrl-imx.h
A.s. Dong b96eea718b pinctrl: fsl: add scu based pinctrl support
Some i.MX SoCs (e.g. MX8QXP and MX8QM) contain a system controller
that is responsible for controlling the pad setting of the IPs that
are present. Communication between the host processor running an OS
and the system controller happens through a SCU protocol.

This patch classifies the pad settings into two categories: MMIO and SCU.
For the original MMIO method, no functional changes except organize them
into a few imx_*_mmio() functions. Besides that, we add the SCU based
Pad Mux and Pinconf setting support which are implemented in pinctrl-scu.c.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05 09:33:32 +01:00

172 lines
4.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* IMX pinmux core definitions
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Dong Aisheng <dong.aisheng@linaro.org>
*/
#ifndef __DRIVERS_PINCTRL_IMX_H
#define __DRIVERS_PINCTRL_IMX_H
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinmux.h>
struct platform_device;
extern struct pinmux_ops imx_pmx_ops;
/**
* struct imx_pin_mmio - MMIO pin configurations
* @mux_mode: the mux mode for this pin.
* @input_reg: the select input register offset for this pin if any
* 0 if no select input setting needed.
* @input_val: the select input value for this pin.
* @configs: the config for this pin.
*/
struct imx_pin_mmio {
unsigned int mux_mode;
u16 input_reg;
unsigned int input_val;
unsigned long config;
};
/**
* struct imx_pin_scu - SCU pin configurations
* @mux: the mux mode for this pin.
* @configs: the config for this pin.
*/
struct imx_pin_scu {
unsigned int mux_mode;
unsigned long config;
};
/**
* struct imx_pin - describes a single i.MX pin
* @pin: the pin_id of this pin
* @conf: config type of this pin, either mmio or scu
*/
struct imx_pin {
unsigned int pin;
union {
struct imx_pin_mmio mmio;
struct imx_pin_scu scu;
} conf;
};
/**
* struct imx_pin_reg - describe a pin reg map
* @mux_reg: mux register offset
* @conf_reg: config register offset
*/
struct imx_pin_reg {
s16 mux_reg;
s16 conf_reg;
};
/* decode a generic config into raw register value */
struct imx_cfg_params_decode {
enum pin_config_param param;
u32 mask;
u8 shift;
bool invert;
};
struct imx_pinctrl_soc_info {
const struct pinctrl_pin_desc *pins;
unsigned int npins;
unsigned int flags;
const char *gpr_compatible;
/* MUX_MODE shift and mask in case SHARE_MUX_CONF_REG */
unsigned int mux_mask;
u8 mux_shift;
/* generic pinconf */
bool generic_pinconf;
const struct pinconf_generic_params *custom_params;
unsigned int num_custom_params;
const struct imx_cfg_params_decode *decodes;
unsigned int num_decodes;
void (*fixup)(unsigned long *configs, unsigned int num_configs,
u32 *raw_config);
int (*gpio_set_direction)(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset,
bool input);
};
/**
* @dev: a pointer back to containing device
* @base: the offset to the controller in virtual memory
*/
struct imx_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
void __iomem *base;
void __iomem *input_sel_base;
const struct imx_pinctrl_soc_info *info;
struct imx_pin_reg *pin_regs;
unsigned int group_index;
struct mutex mutex;
};
#define IMX_CFG_PARAMS_DECODE(p, m, o) \
{ .param = p, .mask = m, .shift = o, .invert = false, }
#define IMX_CFG_PARAMS_DECODE_INVERT(p, m, o) \
{ .param = p, .mask = m, .shift = o, .invert = true, }
#define SHARE_MUX_CONF_REG BIT(0)
#define ZERO_OFFSET_VALID BIT(1)
#define IMX_USE_SCU BIT(2)
#define NO_MUX 0x0
#define NO_PAD 0x0
#define IMX_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
#define PAD_CTL_MASK(len) ((1 << len) - 1)
#define IMX_MUX_MASK 0x7
#define IOMUXC_CONFIG_SION (0x1 << 4)
int imx_pinctrl_probe(struct platform_device *pdev,
const struct imx_pinctrl_soc_info *info);
#ifdef CONFIG_PINCTRL_IMX_SCU
#define BM_PAD_CTL_GP_ENABLE BIT(30)
#define BM_PAD_CTL_IFMUX_ENABLE BIT(31)
#define BP_PAD_CTL_IFMUX 27
int imx_pinctrl_sc_ipc_init(struct platform_device *pdev);
int imx_pinconf_get_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
unsigned long *config);
int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
unsigned long *configs, unsigned num_configs);
void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
unsigned int *pin_id, struct imx_pin *pin,
const __be32 **list_p);
#else
static inline int imx_pinconf_get_scu(struct pinctrl_dev *pctldev,
unsigned pin_id, unsigned long *config)
{
return -EINVAL;
}
static inline int imx_pinconf_set_scu(struct pinctrl_dev *pctldev,
unsigned pin_id, unsigned long *configs,
unsigned num_configs)
{
return -EINVAL;
}
static inline void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
unsigned int *pin_id,
struct imx_pin *pin,
const __be32 **list_p)
{
}
#endif
#endif /* __DRIVERS_PINCTRL_IMX_H */